ROHM Semiconductor

LMR324F-GE2 - 4-Channel Low-Power Op Amp | ROHM

MPN: LMR324F-GE2 ✓ פעיל
14-SOP Package
כמות הזמנה מינימלית: 1 |

LMR324F-GE2 סקירה

The ROHM Semiconductor LMR324F-GE2 is a four-circuit, general-purpose operational amplifier with rail-to-rail output, low-power operation, and ground-sense capability in a 14-SOP package. It combines four independent amplifiers in one package for compact analog signal-conditioning designs.

An operational amplifier, commonly called an op amp, is an active analog component that uses high gain and negative feedback to amplify the voltage difference between its two inputs. The LMR324 belongs to the low-dropout linear-amplifier hierarchy and the broader operational-amplifier semiconductor category. Its ground-sense architecture is intended for applications operating near the lower supply rail, while the full-swing output extends usable output range toward both supply limits.

The primary features include four amplifier circuits per package, rail-to-rail output, low supply-current consumption, low-voltage operation, and a general-purpose signal path. These characteristics make the device useful where several low-level signals must be amplified, buffered, or conditioned without allocating a separate package to every channel. The quad configuration can also reduce board area and simplify power distribution compared with four discrete single amplifiers.

Each channel is intended for conventional closed-loop operation with external feedback. The ground-sense input arrangement is especially relevant to portable measurement, sensor-interface, and low-voltage control circuits where signals may occupy the lower portion of the supply range. Because final offset, bandwidth, slew rate, common-mode range, and output-current limits determine practical performance, designers should consult the ROHM LMR324F datasheet before setting gain, loading, or bypassing values.

Typical uses include low-voltage sensor conditioning, portable instrumentation, industrial control interfaces, battery-powered monitoring, and general-purpose audio or control-signal amplification. A four-channel implementation can provide independent amplification for bridge sensors, analog filters, level conversions within an analog domain, or small actuator-control loops. The same package can also implement repeated circuit blocks where matching and identical part characteristics simplify design review and maintenance.

For a new design, pay particular attention to input common-mode range, output swing under load, stability with the selected feedback network, and decoupling requirements. Place supply bypass capacitors close to the device and route each ground reference carefully, especially when all four channels process signals from different sources. Confirm that the electrical limits support the intended supply voltage, source impedance, capacitive load, and ambient temperature.

This product page combines the manufacturer product information, package identification, cross-reference findings, and practical engineering guidance. It helps engineers compare the LMR324F-GE2 with its documented alternatives while focusing on fit-for-purpose decisions rather than treating package similarity alone as proof of electrical equivalence.

חלופות תחליף ישיר עבור LMR324F-GE2 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LMR324F-GE2 (אותו גורם צורה וטביעת רגל) — שונים ב Package.

ROHM Semiconductor
Package: 14-pin SOP
השווה עם LMR324F-GE2 →

LMR324FJ-GE2

✅ Drop-In
📦 14-SOP
Same four-channel count, a 0% channel-count difference, in the same 14-SOP package; detailed electrical and ordering differences require datasheet confirmation

📋 חלופה להתייחסות (לא בקטלוג)

LMR324F-GE2 דירוגים מרביים ומאפיינים חשמליים

Number of Amplifier Circuits 4 circuits
Device Type General-purpose operational amplifier
Architecture Ground-sense low-power operational amplifier
Output Characteristic Rail-to-rail output
מארז 14-SOP
סוג הרכבה Surface mount

מדריך תצורת פינים של LMR324F-GE2 14-sop

תצורת פינים עבור LMR324F-GE2 (מארזת 14-sop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 14-sop עבור LMR324F-GE2

אין נתוני פריסת פינים מפורטים עבור LMR324F-GE2.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LMR324F-GE2 מתאים עבור 6 יישוםs: Low-Voltage Sensor Signal Conditioning, Portable Battery-Powered Monitoring, Industrial Control Signal Conditioning, General-Purpose Analog Filtering, Audio Interface Conditioning, Test and Measurement Buffering.

🧩

Low-Voltage Sensor Signal Conditioning

The LMR324F-GE2 fits multi-sensor conditioning because it provides four ground-sense amplifier channels, rail-to-rail output, and low-voltage operation in one 14-SOP package. Place one channel around each resistive sensor or low-level transducer, then use external feedback to establish the required gain. The ground-sense input arrangement is useful when the measured signal lies near the lower supply rail, while the full-swing output increases the usable output range. Before finalizing the bias network, confirm that the sensor voltage and noise amplitude remain inside the datasheet common-mode range and that the selected gain is stable at the actual source impedance.

📱

Portable Battery-Powered Monitoring

The LMR324F-GE2 is appropriate for portable monitoring when low-voltage operation and low supply-current consumption are priorities. Its four channels can process temperature, pressure, current, or resistive sensor outputs without requiring four separate amplifier packages. The 14-SOP arrangement reduces board area while centralizing the supply connection. Because battery-powered equipment may impose strict current limits, calculate the total supply demand using the manufacturer operating-current and quiescent-current limits. Also verify the maximum and minimum supply voltages during battery transitions so every input remains within the amplifier's permitted common-mode range.

🏭

Industrial Control Signal Conditioning

The LMR324F-GE2 can condition several low-level industrial control signals in one package. Use the four channels for sensor interfaces, actuator command buffers, or analog threshold stages, with each amplifier configured through its own feedback network. The ground-sense architecture is useful for control electronics whose signals are referenced close to the lower analog rail, and the rail-to-rail output provides more available signal range than a conventional non-rail-to-rail output stage. For factory equipment, verify input range, output swing, and channel-to-channel behavior against the ROHM datasheet, and use a quiet, well-decoupled supply to prevent switching or relay transients from corrupting the amplified signals.

🌐

General-Purpose Analog Filtering

The LMR324F-GE2 supports active-filter designs that require multiple amplifier channels sharing a common supply. Sallen-Key or multiple-feedback sections can be implemented across the four internal amplifiers, simplifying analog signal-conditioning boards without adding four separate packages. Low-voltage operation and low supply-current consumption help preserve portable-system power budgets. The critical design checks are loop stability, gain accuracy, and output drive into the next filter or ADC stage. Use the manufacturer's gain-bandwidth, slew-rate, and output-current limits when selecting resistor and capacitor values, and keep sensitive filter nodes away from switching nodes and high-current return paths.

🎧

Audio Interface Conditioning

The LMR324F-GE2 can provide low-level gain and buffering around audio converter inputs when the operating levels fall within its electrical limits. Its four amplifier channels may condition two stereo channels through balanced stages or provide additional monitoring and output-buffering paths. The rail-to-rail output can be valuable in a low-voltage mixed-signal design, although the complete signal chain must avoid clipping and must remain within the specified input common-mode range. Confirm noise, bandwidth, slew rate, and output-current capability for the intended audio bandwidth, and route analog returns carefully to prevent converter clocks and digital switching currents from coupling into the conditioned audio path.

🔧

Test and Measurement Buffering

The LMR324F-GE2 is useful as a general-purpose input buffer and gain stage for compact measurement equipment. Four channels can buffer separate sensor inputs before multiplexing or conversion, reducing loading on the measured sources. The ground-sense characteristic supports low-level signals referenced near ground, while the rail-to-rail output helps retain usable signal amplitude at reduced supply voltages. For instrumentation-grade accuracy, compare the datasheet offset, bias-current, noise, and drift limits with the measurement error budget. Account for input bias current when choosing source resistors and verify capacitive loading at the ADC input so the selected feedback network maintains closed-loop stability.

What is the LMR324F-GE2?
The LMR324F-GE2 is a four-channel, general-purpose operational amplifier with rail-to-rail output, low-power characteristics, and ground-sense inputs in a 14-SOP package. According to the ROHM LMR324F product information, it is part of the LMR low-voltage amplifier family and consolidates four amplifier circuits into one package for compact, low-power analog designs.
What are the key specifications of LMR324F-GE2 that engineers should know?
The LMR324F-GE2 provides four amplifier channels, rail-to-rail output, low supply-current consumption, low-voltage operation, and ground-sense capability in a 14-SOP package. The ROHM manufacturer datasheet is the controlling source for supply range, bandwidth, offset, common-mode limits, output swing, and temperature ratings, all of which determine its suitability for a specific circuit.
Where can I download the LMR324F-GE2 datasheet PDF?
The official LMR324F-GE2 datasheet is linked from the ROHM LMR324F product page at https://www.rohm.com/products/amplifiers-and-linear/operational-amplifiers/low-power/ground-sense/lmr324f-product. Use the manufacturer document for the authoritative pin assignment, electrical limits, recommended operating conditions, and application details; the -GE2 order code identifies the specific 14-SOP shipping configuration.
Where can I find the LMR324F-GE2 pinout?
The LMR324F-GE2 pinout is found in the pin-description table of the ROHM LMR324F manufacturer datasheet. Because the public result confirms a 14-SOP package but does not reproduce every terminal name, use the datasheet when assigning PCB tracks, particularly for the four amplifier channels, supply pins, and ground connections.
Is the LMR324F-GE2 suitable for low-voltage sensor conditioning?
Yes, the LMR324F-GE2 is suitable for many low-voltage sensor-conditioning applications because it combines a ground-sense input architecture, rail-to-rail output, low-voltage operation, and four channels in one package. Suitability still depends on the sensor output range and the amplifier's specified input common-mode limits. Confirm the signal excursion and supply voltage in the ROHM manufacturer datasheet.
What can replace the LMR324F-GE2?
The LMR324FJ-GE2 is the closest documented same-brand option for a drop-in review because it belongs to the LMR324F family and shares the 14-SOP form factor. A replacement still requires confirmation of pinout, common-mode range, output swing, bandwidth, stability, and ordering details. Use the ROHM LMR324F manufacturer datasheet for the final engineering comparison.
Is LMR324F-GE2 the same as LMR324FJ-GE2?
The LMR324F-GE2 and LMR324FJ-GE2 are both associated with the LMR324F four-channel ground-sense amplifier family and the 14-SOP package, but their exact ordering options and electrical details should be checked before interchange. According to the cross-reference listing, the FJ part is the related candidate. Confirm pinout, temperature grade, and electrical limits against the manufacturer datasheet.
When should I choose LMR324F-GE2 over another four-channel op amp?
Choose the LMR324F-GE2 when a design needs four general-purpose amplifier channels, ground-sense operation, rail-to-rail output, and low-voltage, low-power operation in a 14-SOP package. Select another candidate instead when its bandwidth, offset, common-mode range, output-current capability, noise, or qualification requirements better match the application. Compare those limits before making a footprint-based substitution.
What is the difference between LMR324F-GE2 and LMR358F-GE2?
The LMR324F-GE2 is the four-channel member of the low-power LMR family, whereas the LMR358F-GE2 is a dual amplifier in the related LMR358 family. The target therefore provides twice as many amplifier circuits per package, but the two devices cannot be treated as pin-to-pin equivalents because their channel counts, packages, and detailed electrical specifications differ.
Where can I buy LMR324F-GE2 online?
The LMR324F-GE2 can be requested through the Request a Quote form on this product page. Submit the required quantity, package configuration, and target delivery details so the order can be checked for current availability, traceability, and shipment timing. Current inventory and commercial terms are handled through that form rather than fixed on the page.
What is the price of LMR324F-GE2?
Current commercial pricing for the LMR324F-GE2 should be obtained through the Request a Quote form on this page. The form can reflect the requested quantity and current order conditions more accurately than a static product-page figure. Submit the exact MPN and quantity to receive the applicable quotation and any volume or logistics details.
What is the lead time for LMR324F-GE2?
The current lead time for LMR324F-GE2 depends on stock, order quantity, and shipment requirements. Request the lead time through the Request a Quote form on this page and include the required delivery date and quantity. This allows the order to be reviewed against the exact 14-SOP part number rather than a generic amplifier family.
Is LMR324F-GE2 in stock?
Stock status for the LMR324F-GE2 should be confirmed through the Request a Quote form on this page. Include the required quantity, shipment destination, and production schedule so current availability can be checked. The part's 14-SOP ordering configuration should be stated explicitly to avoid ambiguity with other LMR324F variants.
What is the best cross-brand equivalent for LMR324F-GE2?
No cross-brand part can be confirmed as a true drop-in equivalent from the available manufacturer and cross-reference information. A candidate would need the same 14-SOP pin assignment and comparable common-mode range, output swing, bandwidth, offset, noise, and supply limits. Use this page's documented LMR324FJ-GE2 relationship for the initial same-brand review, then validate any cross-brand proposal electrically.
What design checks are required for an LMR324F-GE2 amplifier design?
Check the input common-mode range, output swing, gain-bandwidth product, slew rate, output current, stability, and supply limits before finalizing the circuit. Decouple the supply close to the device, route each channel's return carefully, and account for the source impedance and capacitive load. The ROHM manufacturer datasheet provides the electrical values needed for those calculations.

נתוני עזר הנדסיים עבור LMR324F-GE2 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LMR324F-GE2 when the design needs four general-purpose amplifier channels in a 14-SOP package and emphasizes low-voltage, low-power operation, ground-sense inputs, and rail-to-rail output. It is well suited to portable instrumentation, industrial signal conditioning, battery-powered monitoring, and compact analog-filter stages. Review the LMR324FJ-GE2 first when seeking another option within the same LMR324F family and 14-SOP footprint, but verify the exact pinout and electrical limits before release. Do not use the dual LMR358F-GE2 as a direct substitute because it has only two amplifier channels. For designs requiring greater precision, bandwidth, noise performance, or automotive qualification, evaluate a device whose published specifications explicitly satisfy those requirements rather than relying on the generic LM324 family or package similarity.

השוואה עם חלופות

פרמטר מוצר זה LMR324FJ-GE2
Number of Amplifier Channels 4 circuits 4 circuits
Package 14-SOP 14-SOP
Brand ROHM Semiconductor ROHM Semiconductor

מבדילים עיקריים

  • Four channels in one package (לעומתLMR358F-GE2)
  • Ground-sense low-power positioning (לעומתLM324F-GE2)
  • Rail-to-rail output for compact low-voltage systems (לעומתLMR324FJ-GE2)

הערות תכנון

Place the supply bypass capacitor immediately adjacent to the LMR324F-GE2 supply and ground pins, and route each amplifier's feedback components close to their corresponding channel pins. Separate sensitive input and feedback traces from switching-node, relay, and high-current return paths. Because one package contains four amplifiers, sharing the package does not justify sharing a sensitive ground reference when the channels originate from different sources.

Do not assume that rail-to-rail output alone permits operation across the entire supply range. Check the input common-mode limits and output-swing curves in the ROHM manufacturer datasheet at the intended load current. Also account for input bias-current error when using high-impedance sensors, and verify capacitive loading at the amplifier output to maintain closed-loop stability.

Calculate power consumption from the selected supply voltage, total channel activity, and the datasheet supply-current limits. Four channels operating simultaneously can increase aggregate current even though each channel is designed for low-power operation. In battery systems, include quiescent current, sensor current, and downstream converter losses in the budget. Confirm startup and shutdown behavior if the amplifier remains connected while the supply ramps through an undefined voltage.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for LMR324F-GE2 were identified in the referenced product information.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LMR324F-GE2 datasheet LMR324F-GE2 datasheet pdf LMR324F-GE2 pinout LMR324F-GE2 equivalent LMR324F-GE2 replacement LMR324F-GE2 cross reference LMR324F-GE2 price LMR324F-GE2 stock ROHM LMR324F-GE2 LMR324F-GE2 14-SOP pinout LMR324F-GE2 application circuit LMR324F-GE2 vs LMR324FJ-GE2 LMR324F-GE2 vs LMR358F-GE2 LMR324F-GE2 footprint

רכיבים ומונחים קשורים

ROHM Semiconductor LMR324F-GE2 LMR324FJ-GE2 LMR358F-GE2 LM324F-GE2 operational amplifier op amp quad amplifier ground-sense amplifier low-power amplifier general-purpose amplifier linear amplifier analog semiconductor rail-to-rail output low-voltage operation 14-SOP SOP package surface-mount package signal conditioning sensor interface active filter common-mode range gain-bandwidth product feedback network supply bypass capacitor
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר