NXP Semiconductors

LPC1825JBD144551 - 180MHz Cortex-M3 MCU | NXP

MPN: LPC1825JBD144551 ✓ פעיל
144-LQFP (20 mm x 20 mm) Package 180 MHz Speed 768 kB Memory
כמות הזמנה מינימלית: 1 |

LPC1825JBD144551 סקירה

NXP Semiconductors LPC1825JBD144551 is a high-performance 32-bit Arm Cortex-M3 microcontroller operating at up to 180 MHz, with 768 kB of flash memory and 136 kB of SRAM in a 144-pin LQFP package. It combines a three-stage Cortex-M3 pipeline, enhanced debug support, integrated support blocks, and USB capability for connected embedded systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The Arm Cortex-M3 belongs to the microcontroller and embedded-processing hierarchy, where deterministic control, compact software, and low-power operation support industrial equipment, communications equipment, consumer products, and connected sensing systems. The LPC18xx family combines that processor architecture with an unusually broad collection of integrated peripherals.

The LPC1825JBD144551's principal specifications are an operating frequency of up to 180 MHz, 768 kB of flash, 136 kB of SRAM, and a 144-LQFP package measuring 20 mm by 20 mm. Flash retains program code and nonvolatile data, while SRAM provides volatile working memory for firmware execution. The large 144-pin package exposes substantially more I/O and peripheral connections than a compact MCU package, making the device suitable for systems requiring Ethernet, USB, industrial I/O, or multiple external interfaces.

The Arm Cortex-M3 core uses a three-stage pipeline and is designed for efficient embedded control. NXP describes the LPC185x, LPC183x, LPC182x, and LPC181x devices as a family of Cortex-M3 microcontrollers with enhanced debug features and a broad integration of support blocks. This combination can reduce the number of companion devices required in a connected control system, although each peripheral must still be configured correctly for its intended electrical function.

Typical uses include Ethernet-connected industrial controllers, USB-enabled data-acquisition equipment, communications infrastructure, embedded gateways, and high-performance control modules. The 136 kB SRAM is especially useful for buffering protocol frames or maintaining multiple communication tasks, while the 768 kB flash accommodates a larger firmware image than many compact Cortex-M3 designs.

PCB design should use the manufacturer's 144-pin LQFP land pattern and preserve adequate clearance around all perimeter pads. Decoupling, crystal routing, high-speed communication interfaces, and exposed-pin assignments must follow the pin-description and layout guidance in the NXP datasheet. Because this large-package MCU exposes many signals, a carefully constrained layout is more important than in designs using a 32-pin or 48-pin microcontroller.

This page combines the manufacturer's core device characteristics, application guidance, drop-in replacement analysis, and practical design considerations in one engineering-focused reference. It also organizes package, memory, interface, and sourcing information for engineers evaluating the LPC1825JBD144551 for a new embedded platform.

חלופות תחליף ישיר עבור LPC1825JBD144551 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LPC1825JBD144551 (אותו גורם צורה וטביעת רגל) — שונים ב Architecture, Flash Memory, Package.

NXP Semiconductors
Architecture: 32-bit ARM
Flash Memory: 768 kB (768K x 8)
Package: LQFP-144 (20 x 20 mm)
השווה עם LPC1825JBD144551 →

LPC1825JBD144E

✅ Drop-In
NXP Semiconductors
📦 LQFP-144 (20 mm x 20 mm)
Arm Cortex-M3 · 180 MHz maximum · 32-bit ARM · 768 kB (768K x 8) · 136 kB · 3-stage · LQFP-144 (20 x 20 mm) · Surface Mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LPC1825JBD144551 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M3
Maximum CPU Frequency 180 MHz
Architecture ARM 32-bit
Flash Memory 768 kB
SRAM 136 kB
USB Capability Yes
מארז 144-LQFP (20 mm x 20 mm)
מספר פינים 144 pins
סוג הרכבה Surface mount
CPU Pipeline 3-stage pipeline
Temperature Grade Industrial

מדריך תצורת פינים של LPC1825JBD144551 144-lqfp (20 mm x 20 mm)

תצורת פינים עבור LPC1825JBD144551 (מארזת 144-lqfp (20 mm x 20 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 144-lqfp (20 mm x 20 mm) עבור LPC1825JBD144551

אין נתוני פריסת פינים מפורטים עבור LPC1825JBD144551.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LPC1825JBD144551 מתאים עבור 6 יישוםs: Ethernet-Connected Industrial Controller, USB Data-Acquisition System, Communications Infrastructure Module, Embedded Sensor Gateway, Robotics Control Platform, High-Performance Control Module.

🏭

Ethernet-Connected Industrial Controller

The LPC1825JBD144551 fits an Ethernet-connected industrial controller that must manage network traffic alongside deterministic control tasks. Its Arm Cortex-M3 core operates at up to 180 MHz, while 136 kB of SRAM provides room for frame buffers and real-time working data. The 768 kB flash capacity supports a larger application than a compact microcontroller, and the 144-pin LQFP exposes extensive I/O for sensors, actuators, status indicators, and field-bus connections. A network PHY and suitably isolated magnetics are still required at the physical layer, so the MCU should be positioned to separate high-speed Ethernet routing from sensitive analog and power sections.

🖥️

USB Data-Acquisition System

The LPC1825JBD144551 is appropriate for a USB-connected data-acquisition system that combines peripheral sampling, local processing, and host communication. Its 180 MHz Cortex-M3 core can execute acquisition control, filtering, and protocol software, while 768 kB flash and 136 kB SRAM reduce the likelihood of memory pressure during continuous transfer. The integrated USB capability avoids a separate host controller. Designers should reserve a controlled USB signal path, provide the required connection circuitry, and use short routed traces away from switching regulators and high-current outputs to limit susceptibility to data errors.

🌐

Communications Infrastructure Module

The LPC1825JBD144551 suits a communications module that must support protocol conversion, buffered traffic handling, and management functions in one device. The 180 MHz Cortex-M3 core provides processing capacity for multiple communication stacks, and the 136 kB SRAM allows more simultaneous buffers than a small-memory microcontroller. Its 144-pin LQFP package provides access to communication, control, and debug signals without requiring a very small PCB. The board should divide communication domains carefully, keep clock and reset routing deterministic, and isolate external line interfaces from the MCU and its sensitive supply rails.

🧩

Embedded Sensor Gateway

The LPC1825JBD144551 can serve as an embedded gateway for aggregating readings from multiple sensors before forwarding them over USB, Ethernet, or serial links. Its 768 kB flash accommodates gateway firmware, protocol handlers, and configuration data, while the 180 MHz processor supports preprocessing and event handling. The 144-pin package is useful for systems with several sensor inputs, indicator outputs, and communication interfaces. Keep analog sensor traces separated from digital communication lines, place grounding thoughtfully around analog and digital sections, and follow the manufacturer's external-component recommendations for stable ADC and communication performance.

🤖

Robotics Control Platform

The LPC1825JBD144551 is appropriate for a robotics controller combining motion logic, sensor processing, communications, and safety monitoring. Its 180 MHz Cortex-M3 core can execute multiple control functions, and 136 kB of SRAM is useful for maintaining sensor history, trajectory parameters, and communication buffers. The 144-pin LQFP package exposes enough connections for encoder inputs, actuator outputs, communications, and diagnostics. Keep motor-driver power paths away from the MCU supply network, provide local decoupling at every supply pin, and validate timing margins under the highest expected interrupt and communications load.

🔧

High-Performance Control Module

The LPC1825JBD144551 fits a high-performance embedded control module that needs more memory and external connectivity than entry-level Cortex-M3 devices provide. The 768 kB flash and 136 kB SRAM support structured firmware, diagnostics, logging, and control algorithms, while the 180 MHz core improves scheduling headroom. Its 144-LQFP package permits a straightforward through-hole-compatible assembly strategy for industrial boards. Designers should review the pin-description table for every multiplexed signal, implement a clean reset and clock strategy, and validate the board against the manufacturer's recommended decoupling and layout guidance before production release.

What are the key specifications of LPC1825JBD144551 that engineers should know?
The LPC1825JBD144551 is a 32-bit NXP Semiconductors microcontroller with an Arm Cortex-M3 core, up to 180 MHz operating frequency, 768 kB of flash memory, 136 kB of SRAM, USB capability, and a 144-pin LQFP package. According to the NXP LPC1825 datasheet, the Cortex-M3 uses a three-stage pipeline and the device integrates enhanced debug features and multiple support blocks. The 20 mm by 20 mm package provides 144 electrical contacts for systems requiring extensive I/O.
What is the operating frequency of LPC1825JBD144551?
The LPC1825JBD144551 operates at CPU frequencies of up to 180 MHz. According to the NXP LPC1825 product documentation, the Arm Cortex-M3 core uses a three-stage pipeline and is optimized for embedded applications. This frequency provides substantial processing headroom for Ethernet protocol handling, USB data transfer, real-time control, and multi-peripheral integration, although actual application performance depends on memory access patterns and peripheral load.
How much memory does LPC1825JBD144551 have?
The LPC1825JBD144551 contains 768 kB of flash memory and 136 kB of SRAM. According to the NXP product description, flash stores the firmware and nonvolatile configuration data, while SRAM supports volatile execution memory. The 768 kB flash capacity accommodates a comparatively large embedded application, and the 136 kB SRAM can support protocol buffering and multiple real-time tasks without continuous external-memory access.
What package does LPC1825JBD144551 use?
The LPC1825JBD144551 uses a 144-pin LQFP package measuring 20 mm by 20 mm. The NXP LPC1825 documentation identifies the device as being offered in a 144-LQFP configuration. Because the package exposes 144 contacts, the board layout must follow the manufacturer land pattern exactly, and PCB designers should maintain suitable solder-mask relief, pad clearance, and copper routing around the perimeter.
Where can I download the LPC1825JBD144551 datasheet PDF?
The official LPC1825JBD144551 datasheet is available through the NXP product page linked on this page. The NXP LPC1825 datasheet contains the authoritative pin-description table, electrical characteristics, clock requirements, peripheral descriptions, memory map, and recommended application information. Use the pin-description table when assigning PCB tracks because the 144-pin package contains power, ground, signal, and alternate-function contacts that must be connected correctly.
Where can I find the LPC1825JBD144551 pinout?
The LPC1825JBD144551 pinout is defined in the pin-description table of the NXP LPC1825 datasheet. Use that table together with the 144-LQFP land pattern because the package includes numerous multiplexed and peripheral signals. The top marking can help identify the fitted device, but it does not replace the datasheet pin table. Verify every power, ground, reset, clock, debug, and communication connection before releasing PCB artwork.
What can replace LPC1825JBD144551?
The LPC1825JBD144E is the closest documented same-family option because it retains the LPC1825 device identity, 180 MHz Cortex-M3 performance, 768 kB flash configuration, and 144-LQFP format while changing the ordering suffix. Exact software, qualification, and sourcing suitability should be checked against the manufacturer's ordering information. A processor with the same package dimensions is not automatically a drop-in replacement because peripheral routing and device identifiers can still differ.
Is LPC1825JBD144E a drop-in replacement for LPC1825JBD144551?
The LPC1825JBD144E is a pin-compatible 144-LQFP alternative for designs using the LPC1825JBD144551, with the manufacturer listing the same 180 MHz Cortex-M3 core and 768 kB flash configuration. The ordering-code difference must still be checked for temperature grade, packing, qualification, or ordering-option requirements. Update the BOM and confirm the manufacturer's ordering table before treating it as an exact production substitute.
When should I choose LPC1825JBD144551 over LPC1825JBD144E?
Choose LPC1825JBD144551 when its exact ordering code matches the required production configuration, including temperature grade and packing. The LPC1825JBD144E can be considered when the schematic and software remain valid and the alternate ordering option satisfies environmental and procurement requirements. Because both devices use the 144-LQFP format, the choice should be driven by ordering-option requirements rather than a PCB footprint change.
Is LPC1825JBD144551 suitable for industrial control and communications equipment?
The LPC1825JBD144551 is suitable for industrial control and communications equipment requiring a high-performance Cortex-M3 core and extensive I/O. Its 180 MHz operating frequency, 768 kB flash, 136 kB SRAM, USB capability, and 144-pin LQFP package support gateway, data-acquisition, and connected-control designs. Industrial suitability should also be confirmed against the exact temperature-grade, compliance, and qualification requirements of the finished system.
What are the best applications for LPC1825JBD144551?
The strongest applications are Ethernet-connected controllers, USB-enabled data-acquisition systems, communications infrastructure, embedded gateways, and complex industrial control modules. The 180 MHz Cortex-M3 core handles demanding control and protocol tasks, while 768 kB flash and 136 kB SRAM reduce pressure on firmware size and working-memory requirements. Its 144-pin LQFP package is particularly useful when the design requires more external signals than a compact microcontroller package offers.
How do LPC1825JBD144551 and LPC1788FBD144 compare?
The LPC1825JBD144551 is a 180 MHz Cortex-M3 device with 768 kB flash, while the LPC1788FBD144,551 is a 120 MHz Cortex-M3 device with 512 kB flash. Both are listed in 144-LQFP packages, but the differences in clock rate and memory capacity are material for firmware size, timing, and performance. Treat the LPC1788 as a design alternative rather than a transparent substitute unless the application requirements explicitly tolerate those reductions.
What is the best NXP alternative for LPC1825JBD144551?
The LPC1825JBD144E is the most direct NXP alternative because it remains in the LPC1825 family and uses the same 144-LQFP format with the same listed 180 MHz Cortex-M3 and 768 kB flash configuration. Review the manufacturer's ordering information for differences in grade, packing, and qualification. This family-level relationship is stronger than selecting an unrelated microcontroller merely because it also uses a 144-pin package.
Where can I buy LPC1825JBD144551 and what is its lead time?
Use the Request a Quote form on this page to ask for LPC1825JBD144551 availability, minimum order quantity, current lead time, and scheduled delivery. The manufacturer product page and distribution listings confirm the exact device family and ordering code, while fulfillment timing can vary with inventory and production conditions. Submit the required quantity and target date so the sourcing team can provide a current commitment rather than a historical estimate.
Is LPC1825JBD144551 in stock?
Current LPC1825JBD144551 inventory should be requested through the Request a Quote form on this page. Market listings indicate that the exact ordering code is distributed, but listing status does not guarantee that every quantity is immediately available. Include your required quantity, target date, and acceptable packaging configuration when requesting a supply confirmation for production planning.

נתוני עזר הנדסיים עבור LPC1825JBD144551 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LPC1825JBD144551 when the design specifically calls for the LPC1825 family, an Arm Cortex-M3 core operating at up to 180 MHz, 768 kB flash, 136 kB SRAM, USB capability, and a 144-pin LQFP footprint. Consider LPC1825JBD144E when the manufacturer confirms that its ordering suffix meets the required temperature, packing, qualification, and production conditions; this is the closest same-family option because the core frequency, flash configuration, and package remain aligned. LPC1788FBD144,551 is a less direct option because its listed 120 MHz frequency and 512 kB flash are materially lower, making it appropriate only when the application has enough margin for reduced processing speed and firmware capacity. No cross-brand drop-in candidate is established by the available manufacturer and distribution information, so a different manufacturer's MCU should not be selected solely because it uses a 144-pin package.

השוואה עם חלופות

פרמטר מוצר זה LPC1825JBD144E
Brand NXP Semiconductors NXP Semiconductors
Package LQFP-144 (20 mm x 20 mm) LQFP-144 (20 mm x 20 mm)
Processor Core Arm Cortex-M3 Arm Cortex-M3
Maximum CPU Frequency 180 MHz 180 MHz
Flash Memory 768 kB 768 kB
CPU Pipeline 3-stage pipeline 3-stage pipeline
Pin Count 144 pins 144 pins

מבדילים עיקריים

  • High Cortex-M3 processing frequency with substantial integrated memory (לעומתLPC1788FBD144,551)
  • Direct same-family ordering option (לעומתLPC1825JBD144E)
  • Large SRAM allocation for embedded workloads (לעומתLPC1788FBD144,551)

הערות תכנון

Use the manufacturer's 144-LQFP land pattern and pin-description table without changing pad geometry. A large perimeter package provides little routing room between opposing rows, so place decoupling capacitors at the associated supply pins, maintain a continuous ground reference, and route high-speed or sensitive signals on the most direct layer available. Check the design against the manufacturer's package dimensions, solder-mask, and copper recommendations before fabrication.

Separate analog, digital, and I/O supply paths as far as the device architecture permits. Place local bulk and high-frequency decoupling close to the MCU supply pins and keep switching-regulator currents out of the sensitive return path. Confirm the operating voltage, absolute maximum ratings, external-component requirements, and power-sequencing behavior in the NXP datasheet before selecting regulators or establishing system power rails.

Give clock, reset, USB, Ethernet, and other communication signals continuous reference planes and avoid unnecessary test pads or long stubs. Keep the crystal and its load components close to the assigned pins, with a quiet return path and no unrelated switching traces beneath the oscillator area. For externally connected interfaces, add the protection and filtering appropriate to the environmental conditions rather than relying on the MCU pins alone.

Do not treat every 144-LQFP Cortex-M3 device as a drop-in substitute. Although footprint dimensions may match, pin multiplexing, peripheral assignments, memory organization, startup behavior, and device identifiers can differ. Validate each alternative against the schematic, boot configuration, firmware, and board-level interface requirements. Preserve the original part number in controlled production documentation until the replacement has passed hardware and firmware verification.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The product is listed with an industrial temperature grade, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LPC1825JBD144551 datasheet LPC1825JBD144551 pinout LPC1825JBD144551 datasheet pdf LPC1825JBD144551 equivalent LPC1825JBD144551 replacement LPC1825JBD144551 cross reference LPC1825JBD144551 footprint LPC1825JBD144551 application circuit LPC1825JBD144551 price LPC1825JBD144551 stock LPC1825JBD144551 vs LPC1825JBD144E NXP LPC1825JBD144551

רכיבים ומונחים קשורים

NXP Semiconductors LPC1825JBD144551 LPC1825JBD144E LPC1788FBD144,551 Arm Cortex-M3 LPC18xx 32-bit microcontroller embedded processor semiconductor USB flash memory SRAM LQFP-144 LQFP package family surface mount industrial control communications equipment data acquisition sensor gateway 180 MHz 768 kB flash 136 kB SRAM three-stage pipeline enhanced debug
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר