LPC1825JBD144551 - 180MHz Cortex-M3 MCU | NXP
Référence : LPC1825JBD144551 ✓ ActifLPC1825JBD144551 Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The Arm Cortex-M3 belongs to the microcontroller and embedded-processing hierarchy, where deterministic control, compact software, and low-power operation support industrial equipment, communications equipment, consumer products, and connected sensing systems. The LPC18xx family combines that processor architecture with an unusually broad collection of integrated peripherals.
The LPC1825JBD144551's principal specifications are an operating frequency of up to 180 MHz, 768 kB of flash, 136 kB of SRAM, and a 144-LQFP package measuring 20 mm by 20 mm. Flash retains program code and nonvolatile data, while SRAM provides volatile working memory for firmware execution. The large 144-pin package exposes substantially more I/O and peripheral connections than a compact MCU package, making the device suitable for systems requiring Ethernet, USB, industrial I/O, or multiple external interfaces.
The Arm Cortex-M3 core uses a three-stage pipeline and is designed for efficient embedded control. NXP describes the LPC185x, LPC183x, LPC182x, and LPC181x devices as a family of Cortex-M3 microcontrollers with enhanced debug features and a broad integration of support blocks. This combination can reduce the number of companion devices required in a connected control system, although each peripheral must still be configured correctly for its intended electrical function.
Typical uses include Ethernet-connected industrial controllers, USB-enabled data-acquisition equipment, communications infrastructure, embedded gateways, and high-performance control modules. The 136 kB SRAM is especially useful for buffering protocol frames or maintaining multiple communication tasks, while the 768 kB flash accommodates a larger firmware image than many compact Cortex-M3 designs.
PCB design should use the manufacturer's 144-pin LQFP land pattern and preserve adequate clearance around all perimeter pads. Decoupling, crystal routing, high-speed communication interfaces, and exposed-pin assignments must follow the pin-description and layout guidance in the NXP datasheet. Because this large-package MCU exposes many signals, a carefully constrained layout is more important than in designs using a 32-pin or 48-pin microcontroller.
This page combines the manufacturer's core device characteristics, application guidance, drop-in replacement analysis, and practical design considerations in one engineering-focused reference. It also organizes package, memory, interface, and sourcing information for engineers evaluating the LPC1825JBD144551 for a new embedded platform.
Alternatives de remplacement direct pour LPC1825JBD144551 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LPC1825JBD144551 (même facteur de forme et même empreinte) — différant par Architecture, Flash Memory, Package.
LPC1825JBD144E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LPC1825JBD144551 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 180 MHz |
| Architecture | ARM 32-bit |
| Flash Memory | 768 kB |
| SRAM | 136 kB |
| USB Capability | Yes |
| Boîtier | 144-LQFP (20 mm x 20 mm) |
| Nombre de broches | 144 pins |
| Type de montage | Surface mount |
| CPU Pipeline | 3-stage pipeline |
| Temperature Grade | Industrial |
Guide de configuration des broches du LPC1825JBD144551 144-lqfp (20 mm x 20 mm)
Configuration des broches du LPC1825JBD144551 (boîtier 144-lqfp (20 mm x 20 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LPC1825JBD144551.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LPC1825JBD144551 convient pour 6 applications: Ethernet-Connected Industrial Controller, USB Data-Acquisition System, Communications Infrastructure Module, Embedded Sensor Gateway, Robotics Control Platform, High-Performance Control Module.
Ethernet-Connected Industrial Controller
The LPC1825JBD144551 fits an Ethernet-connected industrial controller that must manage network traffic alongside deterministic control tasks. Its Arm Cortex-M3 core operates at up to 180 MHz, while 136 kB of SRAM provides room for frame buffers and real-time working data. The 768 kB flash capacity supports a larger application than a compact microcontroller, and the 144-pin LQFP exposes extensive I/O for sensors, actuators, status indicators, and field-bus connections. A network PHY and suitably isolated magnetics are still required at the physical layer, so the MCU should be positioned to separate high-speed Ethernet routing from sensitive analog and power sections.
Recommandé
USB Data-Acquisition System
The LPC1825JBD144551 is appropriate for a USB-connected data-acquisition system that combines peripheral sampling, local processing, and host communication. Its 180 MHz Cortex-M3 core can execute acquisition control, filtering, and protocol software, while 768 kB flash and 136 kB SRAM reduce the likelihood of memory pressure during continuous transfer. The integrated USB capability avoids a separate host controller. Designers should reserve a controlled USB signal path, provide the required connection circuitry, and use short routed traces away from switching regulators and high-current outputs to limit susceptibility to data errors.
Recommandé
Communications Infrastructure Module
The LPC1825JBD144551 suits a communications module that must support protocol conversion, buffered traffic handling, and management functions in one device. The 180 MHz Cortex-M3 core provides processing capacity for multiple communication stacks, and the 136 kB SRAM allows more simultaneous buffers than a small-memory microcontroller. Its 144-pin LQFP package provides access to communication, control, and debug signals without requiring a very small PCB. The board should divide communication domains carefully, keep clock and reset routing deterministic, and isolate external line interfaces from the MCU and its sensitive supply rails.
Recommandé
Embedded Sensor Gateway
The LPC1825JBD144551 can serve as an embedded gateway for aggregating readings from multiple sensors before forwarding them over USB, Ethernet, or serial links. Its 768 kB flash accommodates gateway firmware, protocol handlers, and configuration data, while the 180 MHz processor supports preprocessing and event handling. The 144-pin package is useful for systems with several sensor inputs, indicator outputs, and communication interfaces. Keep analog sensor traces separated from digital communication lines, place grounding thoughtfully around analog and digital sections, and follow the manufacturer's external-component recommendations for stable ADC and communication performance.
Recommandé
Robotics Control Platform
The LPC1825JBD144551 is appropriate for a robotics controller combining motion logic, sensor processing, communications, and safety monitoring. Its 180 MHz Cortex-M3 core can execute multiple control functions, and 136 kB of SRAM is useful for maintaining sensor history, trajectory parameters, and communication buffers. The 144-pin LQFP package exposes enough connections for encoder inputs, actuator outputs, communications, and diagnostics. Keep motor-driver power paths away from the MCU supply network, provide local decoupling at every supply pin, and validate timing margins under the highest expected interrupt and communications load.
Recommandé
High-Performance Control Module
The LPC1825JBD144551 fits a high-performance embedded control module that needs more memory and external connectivity than entry-level Cortex-M3 devices provide. The 768 kB flash and 136 kB SRAM support structured firmware, diagnostics, logging, and control algorithms, while the 180 MHz core improves scheduling headroom. Its 144-LQFP package permits a straightforward through-hole-compatible assembly strategy for industrial boards. Designers should review the pin-description table for every multiplexed signal, implement a clean reset and clock strategy, and validate the board against the manufacturer's recommended decoupling and layout guidance before production release.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LPC1825JBD144551 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LPC1825JBD144E |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | LQFP-144 (20 mm x 20 mm) | LQFP-144 (20 mm x 20 mm) |
| Processor Core | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 180 MHz | 180 MHz |
| Flash Memory | 768 kB | 768 kB |
| CPU Pipeline | 3-stage pipeline | 3-stage pipeline |
| Pin Count | 144 pins | 144 pins |
Principaux différenciateurs
- High Cortex-M3 processing frequency with substantial integrated memory (vs LPC1788FBD144,551)
- Direct same-family ordering option (vs LPC1825JBD144E)
- Large SRAM allocation for embedded workloads (vs LPC1788FBD144,551)
Notes de conception
Use the manufacturer's 144-LQFP land pattern and pin-description table without changing pad geometry. A large perimeter package provides little routing room between opposing rows, so place decoupling capacitors at the associated supply pins, maintain a continuous ground reference, and route high-speed or sensitive signals on the most direct layer available. Check the design against the manufacturer's package dimensions, solder-mask, and copper recommendations before fabrication.
Separate analog, digital, and I/O supply paths as far as the device architecture permits. Place local bulk and high-frequency decoupling close to the MCU supply pins and keep switching-regulator currents out of the sensitive return path. Confirm the operating voltage, absolute maximum ratings, external-component requirements, and power-sequencing behavior in the NXP datasheet before selecting regulators or establishing system power rails.
Give clock, reset, USB, Ethernet, and other communication signals continuous reference planes and avoid unnecessary test pads or long stubs. Keep the crystal and its load components close to the assigned pins, with a quiet return path and no unrelated switching traces beneath the oscillator area. For externally connected interfaces, add the protection and filtering appropriate to the environmental conditions rather than relying on the MCU pins alone.
Do not treat every 144-LQFP Cortex-M3 device as a drop-in substitute. Although footprint dimensions may match, pin multiplexing, peripheral assignments, memory organization, startup behavior, and device identifiers can differ. Validate each alternative against the schematic, boot configuration, firmware, and board-level interface requirements. Preserve the original part number in controlled production documentation until the replacement has passed hardware and firmware verification.
Informations de conformité
The product is listed with an industrial temperature grade, but RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer.