NXP Semiconductors

LPC2114FBD64 - 60MHz ARM7 MCU 128KB Flash | NXP

MPN: LPC2114FBD64 ✓ פעיל
1.8 V to 1.95 V Vdss 64-LQFP, 10 mm x 10 mm Package 60 MHz Speed 128 KB Memory
כמות הזמנה מינימלית: 1 |

LPC2114FBD64 סקירה

NXP Semiconductors LPC2114FBD64 is a 16/32-bit ARM7TDMI-S microcontroller with a maximum clock frequency of 60 MHz, 128 KB of embedded high-speed flash memory, and a 64-LQFP package measuring 10 mm by 10 mm. It is designed for embedded control applications requiring integrated flash, serial interfaces, timing, and analog-to-digital conversion. The LPC2114FBD64 is part of the LPC2000 family of single-chip microcontrollers.

An ARM7TDMI-S microcontroller is a 32-bit embedded processor core that can execute ARM or 16-bit Thumb instructions. The LPC2000 family combines that processor with memory, peripheral peripherals, interrupt handling, and communication interfaces in one package. The 128-bit wide memory interface and accelerator architecture support efficient 32-bit code execution, while Thumb mode can reduce code size for applications where memory density is important.

The LPC2114/2124 family provides 128 KB or 256 KB of embedded high-speed ISP/IAP flash, depending on the selected device. The LPC2114FBD64 is identified with 128 KB of flash in the manufacturer product listing and distributor documentation. The device also includes a 10-bit ADC, programmable I/O, PWM capability, and serial peripherals suited to industrial control, communications, consumer equipment, and general-purpose embedded products.

The 64-LQFP package provides 64 external leads and a compact surface-mount footprint. Its 10 mm by 10 mm body size supports conventional automated PCB assembly while leaving more routing space than many smaller leaded packages. The product family is based on an Arm7TDMI-S architecture with real-time emulation and embedded trace support, which assists development, debugging, and board bring-up.

Typical uses include industrial controllers, data acquisition equipment, communication modules, embedded gateways, motor and power-control systems, and consumer products. The integrated ADC and PWM outputs reduce the number of external devices required for sensing and actuator control, while flash memory allows firmware, boot software, and application code to reside on the MCU.

For PCB implementation, confirm the exact pin assignments, power rails, decoupling requirements, crystal or oscillator connections, programming interface, and exposed-pad or thermal requirements against the manufacturer datasheet. Use the package-specific land pattern and keep high-current supply paths compact. Firmware migration should also account for memory size, peripheral variants, oscillator configuration, and any differences in speed grade.

This product summary combines the manufacturer’s LPC2114FBD64 information with distributor technical listings, package details, and practical implementation guidance for engineers evaluating legacy embedded-control designs.

חלופות תחליף ישיר עבור LPC2114FBD64 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

LPC2114FBD64/00

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 64-LQFP (10x10 mm)
Same LPC2114 family, 60 MHz core, 128 KB flash, and 64-LQFP footprint; ordering suffix may change temperature or qualification limits

📋 חלופה להתייחסות (לא בקטלוג)

LPC2114FBD64/01

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 64-LQFP (10x10 mm)
Same LPC2114 family, 60 MHz core, 128 KB flash, and 64-LQFP footprint; ordering suffix may change temperature or qualification limits

📋 חלופה להתייחסות (לא בקטלוג)

LPC2114FBD64/01,15

✅ Drop-In
📦 64-LQFP (10x10 mm)
Same LPC2114 family, 60 MHz core, 128 KB flash, and 64-LQFP footprint; documented 60 MHz ordering variant

📋 חלופה להתייחסות (לא בקטלוג)

LPC2114FBD64/01,15

✅ Drop-In
📦 64-LQFP (10x10 mm)
Same LPC2114 family and 64-LQFP footprint; ordering suffix and factory identification may differ

📋 חלופה להתייחסות (לא בקטלוג)

LPC2114FBD64/01

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 64-LQFP (10x10 mm)
Same LPC2114 family, 60 MHz core, 128 KB flash, and 64-LQFP footprint; ordering suffix may change temperature or qualification limits

📋 חלופה להתייחסות (לא בקטלוג)

LPC2114FBD64 דירוגים מרביים ומאפיינים חשמליים

Product Type Single-chip 16/32-bit ARM microcontroller
CPU Core Arm7TDMI-S
תדר שעון מקסימלי 60 MHz
Flash Memory 128 KB
SRAM 16 KB
ADC Resolution 10 bit
Programmable I/O Pins 46
Instruction Set 32-bit ARM and 16-bit Thumb
Memory Interface Width 128 bit
Flash Type Embedded ISP/IAP flash
מארז 64-LQFP, 10 mm x 10 mm
מספר פינים 64 pins
סוג הרכבה Surface mount
טווח טמפרטורת פעולה -40 °C to +85 °C
Core Voltage Range 1.8 V to 1.95 V
Debug Support Real-time emulation and embedded trace support
PWM Support Yes
Terminal Pitch 0.50 mm

מדריך תצורת פינים של LPC2114FBD64 64-lqfp, 10 mm x 10 mm

תצורת פינים עבור LPC2114FBD64 (מארזת 64-lqfp, 10 mm x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-lqfp, 10 mm x 10 mm עבור LPC2114FBD64

אין נתוני פריסת פינים מפורטים עבור LPC2114FBD64.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LPC2114FBD64 מתאים עבור 6 יישוםs: Industrial Control Systems, Data Acquisition Equipment, Communication Equipment, Motor and Power Control, Consumer Embedded Products, Embedded Development and Legacy Systems.

🏭

Industrial Control Systems

The LPC2114FBD64 fits compact industrial controllers that require deterministic control, sensor monitoring, and local communications. Its 60 MHz Arm7TDMI-S core provides processing headroom for protocol handling, while 128 KB of embedded ISP/IAP flash stores application and bootloader code. The 10-bit ADC supports process-input acquisition, 46 programmable I/O pins support digital interfaces, and PWM outputs can drive valves, indicators, or actuator command signals. The 64-LQFP package also preserves ample routing space on a control board.

📊

Data Acquisition Equipment

The LPC2114FBD64 is appropriate for compact data-acquisition equipment that combines analog measurement with embedded control. Its 10-bit ADC can digitize sensor inputs, while the 60 MHz processor supports sampling control, filtering, local storage, and communication. With 128 KB flash and 16 KB SRAM, the device can execute focused acquisition firmware without requiring a separate memory component. The 64-LQFP footprint also leaves generous PCB space for analog conditioning, protection, and interface circuitry.

🌐

Communication Equipment

The LPC2114FBD64 can serve as the host controller in communication modules, gateways, and embedded protocol equipment. Its Arm7TDMI-S core supports 32-bit processing and 16-bit Thumb operation, allowing developers to balance throughput and code density. The 128 KB flash accommodates firmware, configuration, and network parameters, while serial and general-purpose I/O resources connect transceivers or companion interface devices. At 60 MHz, it is suitable for moderate protocol workloads that do not require a high-performance Cortex-M core.

⚡

Motor and Power Control

The LPC2114FBD64 is useful in motor-control and power-conversion subsystems where timing, ADC measurement, and PWM outputs must coexist in one controller. The 10-bit ADC can monitor feedback signals, and PWM channels support command generation for drivers or power stages. The 60 MHz Arm7TDMI-S processor can execute control loops, diagnostics, and communication routines. Designers should use the manufacturer timing and peripheral documentation to configure PWM synchronization and validate feedback latency.

🧩

Consumer Embedded Products

The LPC2114FBD64 fits cost-conscious embedded products requiring integrated flash and a compact surface-mount package. A typical product can use the 10-bit ADC for simple analog inputs, PWM for display or indicator control, and GPIO for buttons, sensors, and external logic. The 128 KB flash supports a self-contained firmware image, while 16 KB SRAM is adequate for many real-time control tasks. The 64-LQFP package is particularly useful where a smaller fine-pitch package would complicate assembly.

🔧

Embedded Development and Legacy Systems

The LPC2114FBD64 is a practical choice for maintaining or cloning legacy ARM7-based equipment. Existing LPC2100 firmware can be evaluated on a board using the same processor architecture, 128 KB flash organization, and 64-LQFP footprint. Its real-time emulation and embedded trace support assist board bring-up and diagnostics. For production migration, verify peripheral mapping, startup code, linker memory regions, oscillator settings, and any ordering-code differences before replacing an installed original device.

What are the key specifications of LPC2114FBD64 that engineers should know?
The LPC2114FBD64 combines a 60 MHz Arm7TDMI-S core with 128 KB of embedded high-speed ISP/IAP flash, 16 KB of SRAM, a 10-bit ADC, 46 programmable I/O pins, and PWM support in a 64-LQFP package. According to the NXP product information, its 128-bit memory interface and accelerator architecture support efficient 32-bit execution, while Thumb mode helps reduce code size. The device is intended for embedded control, communications, data acquisition, and industrial applications.
What is the operating voltage of LPC2114FBD64?
The LPC2114FBD64 operates from a 1.8 V to 1.95 V core supply according to the manufacturer-related product information listed for this device. The distributor listing identifies the part as an ARM7 LPC2100 microcontroller with a 60 MHz maximum clock and 128 KB flash. Power sequencing, decoupling, and the voltage tolerance of connected peripherals should be checked against the complete manufacturer datasheet before final board release.
How much flash memory does LPC2114FBD64 contain?
The LPC2114FBD64 contains 128 KB of embedded high-speed ISP/IAP flash. The NXP product page describes the LPC2114/2124 family as combining an Arm7TDMI-S CPU with 128 KB or 256 KB of embedded flash, depending on the exact device. The manufacturer listing and distributor result specifically identify LPC2114FBD64 as the 128 KB version, making it suitable for firmware, bootloader, and application code within that memory limit.
What is the maximum operating frequency of LPC2114FBD64?
The maximum operating frequency of LPC2114FBD64 is 60 MHz. The manufacturer and distributor product descriptions identify the device as an ARM7 LPC2100 microcontroller operating at up to 60 MHz. The Arm7TDMI-S core can execute 32-bit ARM instructions or 16-bit Thumb instructions, and the 128-bit memory interface is intended to support efficient code execution at the maximum clock rate.
What package and pin count does LPC2114FBD64 use?
The LPC2114FBD64 uses a 64-lead LQFP package with a 10 mm by 10 mm body and 0.50 mm terminal pitch. The distributor specification identifies the package as 64-LQFP (10x10), and the manufacturer-related listing describes it as a 64-pin LFQFP package. Use the manufacturer package drawing and pin-description table for the exact lead numbering, exposed thermal-pad arrangement, and PCB land pattern.
Where can I download the LPC2114FBD64 datasheet PDF?
The official LPC2114FBD64 product information is available on the NXP part page at https://www.nxp.com/part/LPC2114FBD64. The verified listing also includes an LPC2114 single-chip microcontroller datasheet link and an indexed PDF copy through a datasheet archive. For design approval, use the NXP document corresponding to the exact LPC2114FBD64 ordering code and confirm its revision before release.
Where can I find the LPC2114FBD64 pinout?
The LPC2114FBD64 pinout is published in the manufacturer datasheet under the LQFP64 pin configuration and pin-description table. The device uses a 64-lead surface-mount package, so pin assignments should be transferred directly from the manufacturer drawing rather than inferred from a generic 64-pin diagram. The product page is https://www.nxp.com/part/LPC2114FBD64, and the package drawing should also be used to establish the PCB orientation and lead numbering.
Where can I buy LPC2114FBD64 online and what is its price?
Use the Request a Quote form on this page to request current LPC2114FBD64 pricing, stock, and lead time for your quantity and packaging requirements. The manufacturer product page confirms the exact device, and distributor listings identify the 64-LQFP package and core technical characteristics. A commercial request allows the configuration, quantity, date, and delivery terms to be confirmed without relying on a static price.
How much lead time is available for LPC2114FBD64?
Request the current LPC2114FBD64 lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on the exact suffix, factory stock, order volume, and delivery destination. The manufacturer lists the device as a product with dedicated ordering information, while distributor search results include both active inventory indications and an out-of-stock result, confirming that current availability should be checked for the requested quantity.
Is LPC2114FBD64 currently available?
Current LPC2114FBD64 availability should be confirmed through the Request a Quote form on this page for the required quantity. One verified distributor result is marked out of stock, while another distributor listing indicates that it can ship today for the identified LPC2114FBD64/01,15 ordering variant. Because LPC2114FBD64 can include different speed and temperature suffixes, confirm that the quoted manufacturer code matches the exact device required by the design.
LPC2114FBD64 vs LPC2114FBD64/01,15 - which version should I choose?
Choose LPC2114FBD64/01,15 when the design specifically requires that ordering code or its documented 60 MHz operating condition. The manufacturer and distributor listings identify LPC2114FBD64 as a 60 MHz ARM7 LPC2100 device and list LPC2114FBD64/01,15 with the same 128 KB flash and 64-LQFP package. The suffix also carries operating-temperature and speed-grade information, so compare the complete ordering table before treating one version as interchangeable.
When should I choose LPC2114FBD64 over a faster ARM Cortex-M MCU?
Choose LPC2114FBD64 when maintaining an existing ARM7TDMI-S design, using its established 64-LQFP footprint, or relying on the LPC2100 peripheral set is more important than adopting a newer architecture. The device provides a 60 MHz Arm7TDMI-S core, 128 KB flash, 16 KB SRAM, and a 10-bit ADC. A newer Cortex-M MCU may offer different performance, tooling, and peripherals, but its pinout, memory map, software, and board layout may differ substantially.
Is LPC2114FBD64 suitable for industrial control applications?
The LPC2114FBD64 is suitable for many industrial control designs that fit its 1.8 V to 1.95 V core-voltage range, -40 °C to +85 °C operating range, 60 MHz processing capability, and integrated analog and timing resources. Its 46 programmable I/O pins support digital interfaces, while the 10-bit ADC can handle sensor inputs. Final suitability depends on the required isolation, environmental qualification, communication protocol, and safety margins.
What can replace LPC2114FBD64?
The closest documented drop-in choices are NXP LPC2114 variants using the same 64-LQFP footprint, including LPC2114FBD64/00 and LPC2114FBD64/01,15. These options differ in speed or temperature ordering information, so their exact electrical limits must be checked before substitution. No verified cross-brand, pin-to-pin 64-LQFP replacement was identified in the available cross-reference results, and a Cortex-M alternative should be treated as a redesign rather than a drop-in replacement.
Can an NXP equivalent replace LPC2114FBD64 without PCB changes?
An LPC2114-family ordering variant may replace LPC2114FBD64 without changing the PCB when the manufacturer confirms identical lead assignments, supply requirements, memory size, and timing limits. The verified results identify LPC2114FBD64/00 and LPC2114FBD64/01,15 as related 64-LQFP devices. However, the suffix can change clock, temperature, or qualification limits, so verify the complete ordering information and perform firmware timing checks before approving the substitution.

נתוני עזר הנדסיים עבור LPC2114FBD64 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LPC2114FBD64 for a design that specifically calls for the 60 MHz Arm7TDMI-S core, 128 KB embedded flash, 16 KB SRAM, 10-bit ADC, and 64-LQFP footprint. LPC2114FBD64/01,15 is a practical related ordering option when that suffix matches the required speed and temperature grade. LPC2114FBD64/00 and LPC2114FBD64/01 can also share the footprint, but their suffix-specific operating limits must be confirmed before substitution. No verified cross-brand pin-to-pin replacement was identified, so changing to another MCU vendor generally requires firmware, peripheral, and PCB verification rather than a simple component swap.

השוואה עם חלופות

פרמטר מוצר זה LPC2114FBD64/00 LPC2114FBD64/01 LPC2114FBD64/01,15 LPC2114FBD64/01,15 LPC2114FBD64/01
Package 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Core Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S Arm7TDMI-S
Maximum Clock Frequency 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
Flash Memory 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
SRAM 16 KB 16 KB 16 KB 16 KB 16 KB 16 KB
ADC Resolution 10 bit 10 bit 10 bit 10 bit 10 bit 10 bit
Programmable I/O Pins 46 pins 46 pins 46 pins 46 pins 46 pins 46 pins

מבדילים עיקריים

  • Integrated flash and SRAM in the same 64-LQFP controller (לעומתLPC2114FBD64/01,15)
  • 60 MHz Arm7TDMI-S processing with Thumb-mode support (לעומתLPC2114FBD64/01)
  • Integrated 10-bit ADC and PWM resources (לעומתLPC2114FBD64/00)

הערות תכנון

Use the manufacturer LQFP64 land pattern and pin-1 orientation when placing the LPC2114FBD64. Keep the 1.8 V to 1.95 V core supply and its decoupling network close to the supply pins, with short return paths to the ground plane. The 0.50 mm terminal pitch requires careful solder-paste and inspection control. Confirm whether the package includes an exposed thermal pad before defining copper and assembly clearance.

Plan the power tree so that the MCU core voltage remains within the manufacturer’s 1.8 V to 1.95 V range under startup, sleep, and maximum-clock operating states. Place bulk capacitance near the regulator output and local high-frequency decoupling beside the MCU supply pins. Validate startup current, peripheral rail sequencing, and clock-dependent current in the complete system rather than relying only on nominal core current.

Route oscillator and programming signals away from switching nodes and high-current return paths. The Arm7TDMI-S device depends on accurate clocking for stable timing, so keep crystal or oscillator traces short and ground-guarded where practical. Provide unobstructed access to the serial programming signals and avoid routing high-speed or noisy analog-adjacent traces beneath sensitive clock and reference circuitry.

Do not treat a similarly named LPC2114 suffix as automatically interchangeable without checking the ordering table. Speed-grade, temperature-range, qualification, and lead-finish codes can differ even when flash size and package remain unchanged. For firmware compatibility, also review startup code, linker memory regions, peripheral availability, interrupt vectors, and clock initialization when moving between LPC2114 ordering variants.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit compliance declarations were included in the manufacturer or distributor product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the exact ordering code and current manufacturer documentation.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LPC2114FBD64 datasheet LPC2114FBD64 datasheet pdf LPC2114FBD64 pinout LPC2114FBD64 specifications NXP LPC2114FBD64 LPC2114FBD64 60MHz ARM7 LPC2114FBD64 128KB flash LPC2114FBD64 LQFP64 LPC2114FBD64 equivalent LPC2114FBD64 replacement LPC2114FBD64 price LPC2114FBD64 stock LPC2114FBD64 industrial control LPC2114FBD64 vs LPC2114FBD64/01,15

רכיבים ומונחים קשורים

NXP Semiconductors LPC2114FBD64 LPC2114FBD64/00 LPC2114FBD64/01 LPC2114FBD64/01,15 LPC2100 Arm7TDMI-S ARM7 microcontroller single-chip microcontroller embedded control 128 KB flash 16 KB SRAM 10-bit ADC 60 MHz PWM ISP IAP Thumb mode LQFP64 surface mount industrial control data acquisition communication equipment
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר