LPC43S67JBD208E - 204MHz Dual-Core MCU 1MB | NXP
MPN: LPC43S67JBD208E ✓ פעילLPC43S67JBD208E סקירה
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The LPC43S67 belongs to the Arm Cortex-M embedded-control hierarchy and combines a 32-bit Cortex-M4 main core with an Arm Cortex-M0 subsystem for managing peripherals. This architecture supports deterministic control alongside more capable general-purpose processing without requiring multiple discrete processors.
Key features include up to 1 MB of program flash, 154 kB of SRAM, 16 kB of EEPROM, Ethernet, two high-speed USB interfaces, LCD support, an AES engine, a quad SPI Flash Interface, advanced SCTimer/PWM peripherals, and Serial General Purpose I/O. The 208-LQFP package exposes the extensive mixed-signal, communications, timer, and general-purpose I/O resources required by industrial equipment.
The dual-core organization allows the Cortex-M4 core to execute control and application software while the Cortex-M0 subsystem handles peripheral tasks. Ethernet, dual high-speed USB, LCD, AES, and configurable timer resources make the device suitable for connected industrial controllers, human-machine interfaces, data acquisition systems, and embedded gateways. The 3.3 V operating specification aligns the device with conventional industrial and consumer logic systems.
Typical applications include factory automation controllers, building automation panels, networked data-acquisition equipment, motor-control systems, and instrumented human-machine interfaces. Designers should use the manufacturer pin-description table when assigning all 208 package pins and should preserve the recommended power, clock, reset, and decoupling layout to maintain reliable operation in demanding embedded environments.
This product page combines the LPC43S67JBD208E architecture, memory configuration, package information, drop-in-family assessment, application guidance, and design considerations to help engineers evaluate the device beyond a basic distributor parameter listing.
חלופות תחליף ישיר עבור LPC43S67JBD208E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם LPC43S67JBD208E (אותו גורם צורה וטביעת רגל) — שונים ב LCD Support, Package, Product Type.
LPC43S67JBD208
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
LPC4357JBD208E
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←LPC4357JBD208E
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←LPC43S67JBD208E-Q1
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
LPC43S67JBD208E דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M4/M0 |
| Architecture | 32-bit RISC |
| Core Configuration | Dual-core |
| Maximum CPU Frequency | 204 MHz |
| Internal Flash Memory | 1 MB (1M x 8) |
| On-Chip SRAM | 154 kB |
| EEPROM Memory | 16 kB |
| Operating Voltage | 3.3 V |
| Ethernet Interface | Yes |
| High-Speed USB Interfaces | 2 |
| LCD Support | Yes |
| AES Engine | Yes |
| SPI Flash Interface | Quad SPI Flash Interface (SPIFI) |
| Timer and PWM Resources | SCTimer/PWM |
| General-Purpose I/O | Serial General Purpose I/O |
| מארז | 208-pin LQFP (28 mm x 28 mm) |
| Package Type | Tray |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של LPC43S67JBD208E tray
תצורת פינים עבור LPC43S67JBD208E (מארזת tray). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור LPC43S67JBD208E.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
LPC43S67JBD208E מתאים עבור 6 יישוםs: Industrial Automation Controller, Human-Machine Interface, Motor Control and Power Conversion, Connected Data Acquisition, Building Automation Gateway, Secure Embedded Gateway.
Industrial Automation Controller
The LPC43S67JBD208E fits factory controllers that combine deterministic machine control with network management. Its Arm Cortex-M4 main core can execute application and motion-control logic at up to 204 MHz, while the Cortex-M0 subsystem manages suitable peripheral tasks. Ethernet supports network communication, while SCTimer/PWM and serial GPIO resources support sensors and actuators. The 208-pin LQFP provides the mixed-signal and digital I/O capacity required by complex industrial equipment. Designers should partition time-critical tasks between the processing elements, isolate analog traces, and follow the manufacturer power and decoupling layout.
מומלץ
Human-Machine Interface
The LPC43S67JBD208E is suitable for graphical human-machine interfaces because its 204 MHz Cortex-M4 core provides substantial application-processing capacity and the device includes LCD support. Ethernet can connect the panel to a supervisory controller, while two high-speed USB interfaces support service connections or peripherals. Up to 1 MB of flash accommodates interface code, graphics resources, and configuration data, while 154 kB of SRAM supports active screen and input processing. The 208-pin LQFP also offers the I/O needed for displays, touch controls, and communication interfaces. Layout work should separate display and touch signals from Ethernet and USB routing.
מומלץ
Motor Control and Power Conversion
The LPC43S67JBD208E can serve as the supervisory controller in a motor-drive or power-conversion system. The 204 MHz Cortex-M4 core handles control algorithms, SCTimer/PWM resources generate precisely timed outputs, and serial GPIO supports encoder, status, and interlock signaling. Its 154 kB of SRAM allows more demanding control state to remain on-chip, while Ethernet provides supervisory connectivity without blocking the real-time control path. The MCU does not directly replace a power stage; it coordinates gate drivers, measurements, and protection. Firmware must define safe states for startup, fault, and emergency shutdown conditions.
מומלץ
Connected Data Acquisition
The LPC43S67JBD208E supports connected data-acquisition equipment that must process multiple sensor streams and transfer results over a shared network. The Cortex-M4 core handles acquisition, filtering, and protocol processing at up to 204 MHz, while 1 MB of flash and 154 kB of SRAM provide embedded storage and working memory. Ethernet and two high-speed USB interfaces allow the instrument to serve as a network node or connect to a host computer. Serial GPIO supports digital sensors and isolated control signals. A practical design should use separate grounding and filtering strategies for sensitive sensor channels and keep high-speed data routes away from analog inputs.
מומלץ
Building Automation Gateway
The LPC43S67JBD208E is appropriate for a building gateway coordinating sensors, HVAC equipment, lighting controls, and remote communications. Ethernet supports management traffic, USB provides local configuration or storage access, and the Cortex-M4/Cortex-M0 combination can divide protocol handling from peripheral servicing. The 1 MB flash capacity accommodates network stacks and application firmware, while AES support can assist with protected communications. Its extensive GPIO supports discrete sensors, relay outputs, and status indicators. Designers should allocate pins only after reviewing the complete electrical and alternate-function tables, and implement power-fail handling so communications and critical outputs transition predictably.
מומלץ
Secure Embedded Gateway
The LPC43S67JBD208E can act as a secure embedded gateway for local sensors, service ports, and enterprise networks. Its AES engine supports cryptographic workloads, Ethernet handles network connectivity, and the two high-speed USB interfaces allow local service or storage devices to remain separate from the main communication path. The 204 MHz Cortex-M4 core can manage protocol stacks, while the Cortex-M0 subsystem handles suitable peripheral work. With 1 MB flash and 154 kB SRAM, the device offers a capable platform for gateway firmware. Security engineering must still define key storage, secure boot, update procedures, and boundary isolation rather than relying on the AES block alone.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור LPC43S67JBD208E — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | LPC43S67JBD208 | LPC4357JBD208E | LPC4357JBD208 | LPC43S67JBD208E-Q1 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 208-LQFP (28x28) | 208-LQFP (28x28) | 208-LQFP (28x28) | 208-LQFP (28x28) | 208-LQFP (28x28) |
| Processor Core | Arm Cortex-M4/M0 | Arm Cortex-M4/M0 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4/M0 |
| Ordering Suffix | E | No E suffix | E | No E suffix | E-Q1 |
מבדילים עיקריים
- Integrated dual-core processing (לעומתLPC4357JBD208E)
- High-speed USB interface count (לעומתLPC4357JBD208E)
- Integrated connectivity and security resources (לעומתLPC4357JBD208)
- Memory capacity for embedded workloads (לעומתLPC43S67JBD208E-Q1)
הערות תכנון
Use the manufacturer power-supply and decoupling requirements for every supply domain. Place bypass capacitors close to the relevant pins and preserve the recommended ground return paths. Because the 208-pin LQFP exposes many I/O and communication functions, do not consolidate all supply connections into a narrow neck or long trace. Validate startup sequencing, power rails, and I/O tolerances against the exact LPC43S67JBD208E electrical characteristics before fabrication.
Route Ethernet, USB, clock, and other high-speed interfaces as controlled-impedance or otherwise properly terminated networks according to the manufacturer guidance. Keep switching interfaces away from sensitive analog inputs and place analog ground and signal returns deliberately rather than relying on automatic plane partitioning. Review the full alternate-function table because moving a pin between digital, analog, and communication functions can change the optimal layout even when the LQFP footprint remains unchanged.
Do not treat a shared LQFP outline as proof that every LPC43-family device is a drop-in replacement. Boot configuration, clock sources, Ethernet PHY integration, USB routing, peripheral instance numbers, memory organization, and package pin multiplexing must be compared against the original design. Remove the current MCU only after a complete pin, timing, firmware, and brownout behavior review confirms compatibility with the proposed alternative.
Assign external memories, flash devices, and high-speed communication partners according to the published interface timing and board-construction guidance. The quad SPI Flash Interface and high-speed USB connections require short, well-controlled routes, suitable return paths, and unobstructed reference planes. Account for signal loading and branch stubs in the schematic review rather than relying on automatic autorouting to produce a production-ready high-speed layout.
מידע על תאימות
Compliance attributes are not stated on the available product landing page. Confirm the exact ordering suffix and environmental declarations in the manufacturer datasheet or product documentation before qualification.