NXP Semiconductors

LPC43S67JBD208E - 204MHz Dual-Core MCU 1MB | NXP

料号: LPC43S67JBD208E ✓ 量产中
3.3 V Vdss 208-pin LQFP (28 mm x 28 mm) Package 204 MHz Speed 1 MB (1M x 8) Memory
最小起订量: 1 |

LPC43S67JBD208E 概述

The NXP Semiconductors LPC43S67JBD208E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller operating up to 204 MHz, with 1 MB of flash and 154 kB of on-chip SRAM in a 208-pin LQFP package. It is designed for high-performance embedded systems that need concurrent real-time control and higher-level application processing.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The LPC43S67 belongs to the Arm Cortex-M embedded-control hierarchy and combines a 32-bit Cortex-M4 main core with an Arm Cortex-M0 subsystem for managing peripherals. This architecture supports deterministic control alongside more capable general-purpose processing without requiring multiple discrete processors.

Key features include up to 1 MB of program flash, 154 kB of SRAM, 16 kB of EEPROM, Ethernet, two high-speed USB interfaces, LCD support, an AES engine, a quad SPI Flash Interface, advanced SCTimer/PWM peripherals, and Serial General Purpose I/O. The 208-LQFP package exposes the extensive mixed-signal, communications, timer, and general-purpose I/O resources required by industrial equipment.

The dual-core organization allows the Cortex-M4 core to execute control and application software while the Cortex-M0 subsystem handles peripheral tasks. Ethernet, dual high-speed USB, LCD, AES, and configurable timer resources make the device suitable for connected industrial controllers, human-machine interfaces, data acquisition systems, and embedded gateways. The 3.3 V operating specification aligns the device with conventional industrial and consumer logic systems.

Typical applications include factory automation controllers, building automation panels, networked data-acquisition equipment, motor-control systems, and instrumented human-machine interfaces. Designers should use the manufacturer pin-description table when assigning all 208 package pins and should preserve the recommended power, clock, reset, and decoupling layout to maintain reliable operation in demanding embedded environments.

This product page combines the LPC43S67JBD208E architecture, memory configuration, package information, drop-in-family assessment, application guidance, and design considerations to help engineers evaluate the device beyond a basic distributor parameter listing.

直接替换替代料: LPC43S67JBD208E ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LPC43S67JBD208E (相同外形与封装尺寸) ——差异在于 LCD Support, Package, Product Type.

NXP Semiconductors
LCD Support: Supported
Package: 208-pin LQFP
Product Type: 32-bit Arm Cortex-M4/M0 microcontroller
对比 LPC43S67JBD208E →

LPC43S67JBD208

✅ 直接替换 ⚠️ 规格未核验
📦 208-LQFP (28x28)
Same LPC43S67 family and 208-LQFP outline; ordering suffix differs, so temperature range and order-code attributes must be confirmed against the manufacturer datasheet.

📋 参考替代料(不在目录中)

LPC4357JBD208E

✅ 直接替换
NXP Semiconductors
📦 208-LQFP (28x28)
32-bit Arm Cortex-M4/M0 microcontroller · Arm Cortex-M4 · Arm Cortex-M0 · 1 MB · 136 kB · 16 kB · 3.3 V · 208-pin LQFP

联系询价

查看数据手册 →

LPC4357JBD208E

✅ 直接替换 ⚠️ 规格未核验
NXP Semiconductors
📦 208-LQFP (28x28)
32-bit Arm Cortex-M4/M0 microcontroller · Arm Cortex-M4 · Arm Cortex-M0 · 1 MB · 136 kB · 16 kB · 3.3 V · 208-pin LQFP

联系询价

查看数据手册 →

LPC43S67JBD208E-Q1

✅ 直接替换 ⚠️ 规格未核验
📦 208-LQFP (28x28)
Same LPC43S67JBD208E base device and package, with an automotive-ordering suffix intended for a different qualification profile; exact electrical limits require datasheet confirmation.

📋 参考替代料(不在目录中)

LPC43S67JBD208E 最大额定值与电气特性

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M4/M0
Architecture 32-bit RISC
Core Configuration Dual-core
Maximum CPU Frequency 204 MHz
Internal Flash Memory 1 MB (1M x 8)
On-Chip SRAM 154 kB
EEPROM Memory 16 kB
Operating Voltage 3.3 V
Ethernet Interface Yes
High-Speed USB Interfaces 2
LCD Support Yes
AES Engine Yes
SPI Flash Interface Quad SPI Flash Interface (SPIFI)
Timer and PWM Resources SCTimer/PWM
General-Purpose I/O Serial General Purpose I/O
封装 208-pin LQFP (28 mm x 28 mm)
Package Type Tray
安装类型 Surface mount

LPC43S67JBD208E tray 引脚配置指南

LPC43S67JBD208E(tray 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

LPC43S67JBD208E 的 tray 封装引脚图

暂无详细引脚数据: LPC43S67JBD208E.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LPC43S67JBD208E 适用于 6 应用s: Industrial Automation Controller, Human-Machine Interface, Motor Control and Power Conversion, Connected Data Acquisition, Building Automation Gateway, Secure Embedded Gateway.

🏭

Industrial Automation Controller

The LPC43S67JBD208E fits factory controllers that combine deterministic machine control with network management. Its Arm Cortex-M4 main core can execute application and motion-control logic at up to 204 MHz, while the Cortex-M0 subsystem manages suitable peripheral tasks. Ethernet supports network communication, while SCTimer/PWM and serial GPIO resources support sensors and actuators. The 208-pin LQFP provides the mixed-signal and digital I/O capacity required by complex industrial equipment. Designers should partition time-critical tasks between the processing elements, isolate analog traces, and follow the manufacturer power and decoupling layout.

📺

Human-Machine Interface

The LPC43S67JBD208E is suitable for graphical human-machine interfaces because its 204 MHz Cortex-M4 core provides substantial application-processing capacity and the device includes LCD support. Ethernet can connect the panel to a supervisory controller, while two high-speed USB interfaces support service connections or peripherals. Up to 1 MB of flash accommodates interface code, graphics resources, and configuration data, while 154 kB of SRAM supports active screen and input processing. The 208-pin LQFP also offers the I/O needed for displays, touch controls, and communication interfaces. Layout work should separate display and touch signals from Ethernet and USB routing.

⚡

Motor Control and Power Conversion

The LPC43S67JBD208E can serve as the supervisory controller in a motor-drive or power-conversion system. The 204 MHz Cortex-M4 core handles control algorithms, SCTimer/PWM resources generate precisely timed outputs, and serial GPIO supports encoder, status, and interlock signaling. Its 154 kB of SRAM allows more demanding control state to remain on-chip, while Ethernet provides supervisory connectivity without blocking the real-time control path. The MCU does not directly replace a power stage; it coordinates gate drivers, measurements, and protection. Firmware must define safe states for startup, fault, and emergency shutdown conditions.

🌐

Connected Data Acquisition

The LPC43S67JBD208E supports connected data-acquisition equipment that must process multiple sensor streams and transfer results over a shared network. The Cortex-M4 core handles acquisition, filtering, and protocol processing at up to 204 MHz, while 1 MB of flash and 154 kB of SRAM provide embedded storage and working memory. Ethernet and two high-speed USB interfaces allow the instrument to serve as a network node or connect to a host computer. Serial GPIO supports digital sensors and isolated control signals. A practical design should use separate grounding and filtering strategies for sensitive sensor channels and keep high-speed data routes away from analog inputs.

🧩

Building Automation Gateway

The LPC43S67JBD208E is appropriate for a building gateway coordinating sensors, HVAC equipment, lighting controls, and remote communications. Ethernet supports management traffic, USB provides local configuration or storage access, and the Cortex-M4/Cortex-M0 combination can divide protocol handling from peripheral servicing. The 1 MB flash capacity accommodates network stacks and application firmware, while AES support can assist with protected communications. Its extensive GPIO supports discrete sensors, relay outputs, and status indicators. Designers should allocate pins only after reviewing the complete electrical and alternate-function tables, and implement power-fail handling so communications and critical outputs transition predictably.

🔒

Secure Embedded Gateway

The LPC43S67JBD208E can act as a secure embedded gateway for local sensors, service ports, and enterprise networks. Its AES engine supports cryptographic workloads, Ethernet handles network connectivity, and the two high-speed USB interfaces allow local service or storage devices to remain separate from the main communication path. The 204 MHz Cortex-M4 core can manage protocol stacks, while the Cortex-M0 subsystem handles suitable peripheral work. With 1 MB flash and 154 kB SRAM, the device offers a capable platform for gateway firmware. Security engineering must still define key storage, secure boot, update procedures, and boundary isolation rather than relying on the AES block alone.

What are the key specifications of LPC43S67JBD208E that engineers should know?
The LPC43S67JBD208E is a 204 MHz, 32-bit dual-core Arm Cortex-M4/M0 microcontroller with 1 MB of flash, 154 kB of SRAM, and 16 kB of EEPROM in a 208-pin LQFP package. NXP identifies Ethernet, two high-speed USB interfaces, LCD support, AES, quad SPIFI, and advanced timer and serial I/O resources. These parameters place it in the high-performance embedded-control class rather than a basic general-purpose MCU.
Where can I download the LPC43S67JBD208E datasheet PDF?
The official LPC43S67JBD208 product information and datasheet are available from the NXP product page at https://www.nxp.com/part/LPC43S67JBD208. Use the manufacturer documentation for the complete electrical characteristics, memory map, peripheral descriptions, package dimensions, and the authoritative 208-pin connection table. The LPC43S67JBD208E ordering suffix identifies the specific leaded package configuration.
Where can I find the LPC43S67JBD208E pinout?
The LPC43S67JBD208E pinout is documented in the pin-description table in the NXP LPC43S67JBD208 datasheet. The device uses a 208-pin LQFP package measuring 28 mm by 28 mm. Because the complete numbered pin list is not reproduced on the product landing page, use the manufacturer package drawing and connection table when assigning power, ground, clock, communications, analog, and general-purpose I/O functions.
What is the LPC43S67JBD208E processor architecture?
The LPC43S67JBD208E combines an Arm Cortex-M4 core with an Arm Cortex-M0 subsystem in a 32-bit RISC architecture. According to the NXP product information, the Cortex-M0 subsystem can manage peripherals while the Cortex-M4 core performs higher-level processing. The device operates up to 204 MHz and supports as much as 1 MB of internal flash plus 154 kB of on-chip SRAM.
How much memory does the LPC43S67JBD208E have?
The LPC43S67JBD208E provides up to 1 MB of internal flash, 154 kB of on-chip SRAM, and 16 kB of EEPROM. NXP describes the flash as 1M by 8 bits. This combination supports embedded firmware, protocol stacks, graphics or interface data, and concurrent tasks across the Cortex-M4 and Cortex-M0 processing elements.
What communications interfaces are available on LPC43S67JBD208E?
The LPC43S67JBD208E includes Ethernet, two high-speed USB interfaces, and a quad SPI Flash Interface. NXP also identifies Serial General Purpose I/O and advanced configurable peripherals. This interface mix supports network-connected industrial controllers, USB-connected peripherals, high-speed storage interfaces, and real-time embedded control systems.
Is LPC43S67JBD208E suitable for industrial automation and motor control?
Yes, the LPC43S67JBD208E is suitable for demanding embedded-control applications because it combines 204 MHz Cortex-M4 processing, a Cortex-M0 peripheral subsystem, SCTimer/PWM resources, serial GPIO, Ethernet, and USB. These resources support machine controllers, data-acquisition nodes, and motor-control architectures, subject to the electrical limits and peripheral configuration specified in the NXP datasheet.
LPC43S67JBD208E vs LPC4357JBD208E: which is better for a new design?
Choose LPC43S67JBD208E when the Cortex-M4 plus Cortex-M0 subsystem, Ethernet, two high-speed USB ports, LCD support, AES, and quad SPIFI combination matches the application. LPC4357JBD208E belongs to the closely related NXP LPC43 family and uses the same 208-pin LQFP format, but its specific peripheral mix and memory configuration must be checked in the datasheet. The final choice depends on required controllers, memory, security functions, and validation.
When should I choose LPC43S67JBD208E over LPC43S67JBD208?
Choose the E-suffixed LPC43S67JBD208E when the exact ordering configuration shown for the 208-pin LQFP tray is the one required by the BOM and manufacturer ordering information. Choose LPC43S67JBD208 when its documented temperature, packaging, or ordering attributes better fit the product. Confirm suffix decoding, electrical ratings, and assembly requirements directly against the manufacturer documentation before releasing a PCB.
What is the best drop-in replacement for LPC43S67JBD208E?
No universally verified cross-manufacturer drop-in replacement has been established for the LPC43S67JBD208E. The closest engineering candidates are same-family NXP devices in the 208-pin LQFP format, including LPC43S67JBD208 and LPC4357JBD208E, but software, peripherals, memory, clocking, and electrical differences still require review. A replacement is suitable only after its complete pin and peripheral mapping matches the existing PCB and firmware.
Can LPC4357JBD208E replace LPC43S67JBD208E without PCB changes?
LPC4357JBD208E can be evaluated as a same-package NXP-family replacement because both are listed in the 208-pin LQFP format, but physical package equality alone does not guarantee drop-in compatibility. Review all power pins, clock inputs, Ethernet and USB routing, analog functions, boot behavior, peripheral assignments, and software device configuration. The existing firmware should also be revalidated before production use.
Where can I buy LPC43S67JBD208E online?
Use the Request a Quote form on this page to request LPC43S67JBD208E availability, current lead time, and order handling through XAIPART. The manufacturer ordering code is LPC43S67JBD208E in a 208-pin LQFP tray configuration. The request should include your required quantity, target delivery date, and approved-source or inspection requirements so the commercial response matches the production plan.
What is the current price of LPC43S67JBD208E?
The current commercial price for LPC43S67JBD208E should be requested through the Request a Quote form on this page. The structured listing records the exact MPN and its latest known unit-price reference, but live pricing depends on quantity, supply position, and order terms. Include quantity breaks, target date, and required packaging details in the request for an actionable quotation.
What is the lead time and stock status for LPC43S67JBD208E?
Request the current stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The LPC43S67JBD208E is identified as an NXP 208-pin LQFP tray-ordering configuration, and the manufacturer product page remains the primary source for ordering availability. Avoid treating marketplace availability messages as a guaranteed allocation for a production build.
Is LPC43S67JBD208E still active?
The LPC43S67JBD208 remains an active NXP product family, and the manufacturer maintains a dedicated product-information page for LPC43S67JBD208. Lifecycle status can vary by exact package, temperature grade, or ordering suffix, so procurement should periodically confirm the LPC43S67JBD208E status through the Request a Quote form and NXP documentation before committing to long-term production.
What design considerations matter for a PCB using LPC43S67JBD208E?
A robust LPC43S67JBD208E layout follows the manufacturer pin, power, clock, reset, and decoupling guidance. Place power bypass components close to their associated supply pins, provide clean clock routing, keep high-speed Ethernet and USB interfaces away from sensitive analog nodes, and reserve correct programming and boot connections. Because the device has 208 pins and extensive mixed-signal peripherals, complete pin assignment and power-domain review are essential before layout release.

工程参考数据: LPC43S67JBD208E ——对比、设计指导和合规信息。

选型指南

Select LPC43S67JBD208E when the design benefits from 204 MHz Arm Cortex-M4 processing, a Cortex-M0 subsystem, 1 MB flash, 154 kB SRAM, Ethernet, two high-speed USB interfaces, LCD support, AES, and quad SPI Flash connectivity in a 208-pin LQFP. LPC43S67JBD208 is the logical ordering-code alternative when its documented grade and suffix attributes fit the design better. Consider LPC4357JBD208E or LPC4357JBD208 when a same-brand, same-package Cortex-M4 solution is sufficient and its peripheral mix aligns more closely with the board. None of these choices should be treated as automatic replacements: compare power pins, clocks, boot straps, communications routing, analog functions, and device drivers. No verified cross-manufacturer drop-in part was established, so a cross-brand redesign should be approached as a full hardware and firmware migration rather than a footprint substitution.

与替代料对比

参数 本产品 LPC43S67JBD208 LPC4357JBD208E LPC4357JBD208 LPC43S67JBD208E-Q1
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 208-LQFP (28x28) 208-LQFP (28x28) 208-LQFP (28x28) 208-LQFP (28x28) 208-LQFP (28x28)
Processor Core Arm Cortex-M4/M0 Arm Cortex-M4/M0 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4/M0
Ordering Suffix E No E suffix E No E suffix E-Q1

关键差异点

  • Integrated dual-core processing (对比 LPC4357JBD208E)
  • High-speed USB interface count (对比 LPC4357JBD208E)
  • Integrated connectivity and security resources (对比 LPC4357JBD208)
  • Memory capacity for embedded workloads (对比 LPC43S67JBD208E-Q1)

设计说明

Use the manufacturer power-supply and decoupling requirements for every supply domain. Place bypass capacitors close to the relevant pins and preserve the recommended ground return paths. Because the 208-pin LQFP exposes many I/O and communication functions, do not consolidate all supply connections into a narrow neck or long trace. Validate startup sequencing, power rails, and I/O tolerances against the exact LPC43S67JBD208E electrical characteristics before fabrication.

Route Ethernet, USB, clock, and other high-speed interfaces as controlled-impedance or otherwise properly terminated networks according to the manufacturer guidance. Keep switching interfaces away from sensitive analog inputs and place analog ground and signal returns deliberately rather than relying on automatic plane partitioning. Review the full alternate-function table because moving a pin between digital, analog, and communication functions can change the optimal layout even when the LQFP footprint remains unchanged.

Do not treat a shared LQFP outline as proof that every LPC43-family device is a drop-in replacement. Boot configuration, clock sources, Ethernet PHY integration, USB routing, peripheral instance numbers, memory organization, and package pin multiplexing must be compared against the original design. Remove the current MCU only after a complete pin, timing, firmware, and brownout behavior review confirms compatibility with the proposed alternative.

Assign external memories, flash devices, and high-speed communication partners according to the published interface timing and board-construction guidance. The quad SPI Flash Interface and high-speed USB connections require short, well-controlled routes, suitable return paths, and unobstructed reference planes. Account for signal loading and branch stubs in the schematic review rather than relying on automatic autorouting to produce a production-ready high-speed layout.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance attributes are not stated on the available product landing page. Confirm the exact ordering suffix and environmental declarations in the manufacturer datasheet or product documentation before qualification.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

LPC43S67JBD208E datasheet LPC43S67JBD208E pinout LPC43S67JBD208E datasheet pdf LPC43S67JBD208E price LPC43S67JBD208E stock LPC43S67JBD208E equivalent LPC43S67JBD208E replacement LPC43S67JBD208E footprint NXP LPC43S67JBD208E LPC43S67JBD208 208-LQFP LPC43S67JBD208E vs LPC4357JBD208E LPC43S67JBD208E Cortex-M4 M0 LPC43S67JBD208E Ethernet USB LPC43S67JBD208E industrial controller what can replace LPC43S67JBD208E

相关元器件 & 术语

NXP Semiconductors LPC43S67JBD208E LPC43S67JBD208 LPC4357JBD208E LPC4357JBD208 LPC43S67JBD208E-Q1 Arm Cortex-M4 Arm Cortex-M0 microcontroller MCU embedded controller 32-bit RISC semiconductor 1 MB flash 154 kB SRAM 16 kB EEPROM Ethernet high-speed USB LCD controller AES engine SPIFI SCTimer/PWM Serial General Purpose I/O 208-LQFP LQFP package
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情