Analog Devices

LT1280ACN - Dual RS-232 Transceiver, 5V, 18-DIP | Analog Devices

MPN: LT1280ACN ✓ פעיל
5 V Vdss 18-pin PDIP Package
כמות הזמנה מינימלית: 1 |

LT1280ACN סקירה

The Analog Devices LT1280ACN is a dual RS-232 driver/receiver pair with an integrated charge pump, designed to operate from a single 5 V supply. The device provides two transmit channels and two receive channels in an 18-pin PDIP package and is identified as a commercial-grade component. It uses 0.1 uF external charge-pump capacitors and is specified to consume 40 mW of power. The LT1280A family also supports operation up to 120 kbaud according to the manufacturer product information.

An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage levels used by RS-232 serial links. It sits between a host, controller, or data-processing system and an external serial port. The dual-driver and dual-receiver arrangement allows one LT1280ACN to support a full-duplex connection with two data paths, while the integrated charge pump generates the bipolar RS-232 voltage levels required by the interface standard from a single low-voltage supply.

The LT1280ACN is positioned for low-power, low-to-moderate-speed serial communication systems. Its 5 V supply operation, 120 kbaud capability, and low 40 mW power consumption make it suitable for industrial control equipment, instrumentation, computer peripherals, and embedded systems that use RS-232 links. The integral charge-pump design reduces the external support circuitry required for RS-232 level generation, while the 18-pin PDIP package supports conventional through-hole board assembly.

The rugged bipolar design provides operating fault tolerance and ESD protection according to the manufacturer datasheet description. These characteristics are particularly useful in industrial and equipment-facing environments where an RS-232 connector may be exposed to ESD events, wiring transients, or accidental short circuits. Designers should still provide appropriate system-level protection and correctly route the transceiver signals for reliable operation.

When selecting the LT1280ACN, confirm the 18-pin PDIP footprint, single 5 V supply requirement, external capacitor values, and the required data rate against the system interface. The commercial temperature grade and through-hole package make it appropriate for equipment designs that prioritize a conventional RS-232 transceiver with low power consumption and integrated charge-pump functionality.

This product summary combines the manufacturer device description, package information, and distributor technical listings for engineering selection. For a new design, use the manufacturer datasheet for absolute maximum ratings, electrical characteristics, timing information, pin functions, capacitor recommendations, and application details before finalizing the PCB layout.

חלופות תחליף ישיר עבור LT1280ACN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

LT1280AIN#PBF

✅ Drop-In
📦 PDIP-18
Documented as functionally consistent with the same 18-pin PDIP terminal arrangement; the LT1280AIN listing identifies 4.5 V operation and 250 kbps, while the LT1280ACN family description identifies 5 V operation and up to 120 kbaud.

📋 חלופה להתייחסות (לא בקטלוג)

LT1280AIN

✅ Drop-In
📦 PDIP-18
Same dual 5 V RS-232 family and PDIP-18 format; ordering suffix and production status differ, while the comparison listing identifies 250 kbps against the family description of up to 120 kbaud.

📋 חלופה להתייחסות (לא בקטלוג)

LT1280ACN#PBF

✅ Drop-In
📦 PDIP-18
Same 18-pin PDIP full-duplex RS-232 configuration and listed 250 kbps performance; the #PBF ordering code differs from the base MPN and requires confirmation of current lifecycle and finish designation.

📋 חלופה להתייחסות (לא בקטלוג)

LT1280ACN

✅ Drop-In
Analog Devices
📦 PDIP-18
Dual RS-232 driver/receiver pair · 2 · 2 · 5 V · 120 kbaud · 40 mW · 0.1 uF · Yes

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LT1280ACN מפרטים

Product Type Dual RS-232 driver/receiver pair
Number of Drivers 2
Number of Receivers 2
מתח אספקה 5 V
קצב נתונים 120 kbaud
Power Consumption 40 mW
External Charge-Pump Capacitor 0.1 uF
Integrated Charge Pump Yes
Temperature Grade Commercial
Package Type 18-pin PDIP
סוג הרכבה Through-hole
Number of Terminals 18
Package Code DIP
Package Shape Rectangular
ESD Protection Integrated
Operating Fault Tolerance Rugged bipolar design

מדריך תצורת פינים של LT1280ACN rectangular

תצורת פינים עבור LT1280ACN (מארזת rectangular). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת rectangular עבור LT1280ACN

אין נתוני פריסת פינים מפורטים עבור LT1280ACN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LT1280ACN מתאים עבור 6 יישוםs: Industrial Control Equipment, Test and Measurement Instrumentation, Computer Peripherals and Legacy Ports, Embedded Serial Communication, Telecommunications and Network Support Equipment, Security and Access-Control Systems.

🏭

Industrial Control Equipment

The LT1280ACN suits RS-232 service ports on industrial controllers, configuration tools, and remote I/O equipment. Its two drivers and two receivers support bidirectional serial communication from a single 5 V supply, while the integrated charge pump avoids a separate bipolar supply. Operation up to 120 kbaud is appropriate for supervisory links and legacy factory equipment. The 40 mW specified consumption is useful in compact panels, and the 18-pin PDIP supports conventional through-hole assembly.

🔧

Test and Measurement Instrumentation

The LT1280ACN can provide the legacy RS-232 connection used by programmable instruments, bench equipment, and data-acquisition products. The integrated charge pump and 0.1 uF capacitors simplify the level-shifting section, leaving more board area for measurement circuitry. Two drivers and two receivers provide useful full-duplex channel flexibility. Its 120 kbaud family capability suits control and status traffic, while low 40 mW power consumption benefits portable or multi-instrument bench systems.

🖥️

Computer Peripherals and Legacy Ports

The LT1280ACN is appropriate for legacy serial ports in printers, scanners, industrial peripherals, and embedded accessories that still communicate through RS-232. A single 5 V rail simplifies system power design, and the integral charge pump produces the required bipolar signal levels internally. The dual-channel arrangement permits multiple serial paths on one board. Its commercial grade and PDIP-18 format are best matched to equipment designed for through-hole assembly and moderate data rates up to 120 kbaud.

🧩

Embedded Serial Communication

The LT1280ACN can bridge a 5 V embedded controller to an RS-232 device when the system retains a legacy serial interface. Using two transmitters and two receivers allows separate command and status paths, while the integrated charge pump reduces external voltage-generation circuitry. The 40 mW specified power use is valuable in embedded equipment with constrained thermal budgets. Designers should check logic thresholds, timing, and cable capacitance against the manufacturer datasheet for the intended baud rate.

🌐

Telecommunications and Network Support Equipment

The LT1280ACN can support maintenance, console, or equipment-control ports in telecommunications and network-support equipment that still uses RS-232. The 5 V supply requirement integrates easily with conventional telecommunications boards, and the fault-tolerant bipolar construction plus ESD protection add robustness around external connectors. The 120 kbaud family rate suits administrative and control links rather than high-speed data transfer. The PDIP-18 outline is especially convenient for legacy boards designed around through-hole interfaces.

🎥

Security and Access-Control Systems

The LT1280ACN can be used in access-control panels, alarm controllers, and security equipment with an RS-232 configuration or programming interface. Its integrated ESD protection and operating fault tolerance are useful at connector-facing circuits exposed to user wiring. Two transmit and two receive channels provide flexibility for combining configuration and status connections. Low 40 mW power consumption helps compact panels, while the commercial temperature grade should be checked against the installation environment before deployment.

What is the LT1280ACN?
The LT1280ACN is a dual RS-232 driver/receiver transceiver from Analog Devices with an integrated charge pump. It operates from a single 5 V supply, includes two drivers and two receivers, and uses external 0.1 uF capacitors. The device is packaged in an 18-pin PDIP and is listed as a commercial-grade component. According to the manufacturer datasheet, the integral charge pump generates the required RS-232 voltage levels from the single supply.
What is the operating voltage of the LT1280ACN?
The LT1280ACN operates from a single 5 V supply. The manufacturer describes the LT1280A and LT1281A as low-power 5 V RS-232 dual driver/receiver circuits with an integral charge pump. This single-supply architecture lets the IC generate the bipolar voltage levels required by RS-232 without a separate negative supply. Refer to the manufacturer datasheet for the exact supply-current limits and operating conditions before finalizing the power design.
How fast is the LT1280ACN RS-232 transceiver?
The LT1280ACN family supports operation up to 120 kbaud according to the Analog Devices product page. That rate is suitable for many RS-232 control, diagnostic, and instrumentation links. The manufacturer datasheet should be used to check driver and receiver timing, slew behavior, and loading requirements for the selected cable and baud rate. The 120 kbaud figure is a family-level capability description, not a substitute for the complete timing specifications.
What package does the LT1280ACN use?
The LT1280ACN uses an 18-pin PDIP package with through-hole mounting. Distributor and comparison listings identify the part as an 18-DIP commercial-grade component. Because the 18-pin PDIP outline is not included in the package-diagram library used for this listing, the page uses the default package graphic rather than displaying an inaccurate pin drawing. Use the manufacturer datasheet for the exact pin numbering and physical dimensions.
Where can I download the LT1280ACN datasheet PDF?
The official LT1280A datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/12801afa.pdf. The document covers the LT1280A and LT1281A RS-232 driver/receiver family, including the integral charge pump, external capacitor arrangement, electrical characteristics, and application information. The product page at https://www.analog.com/en/products/lt1280a.html provides the related documentation and ordering information.
Where can I find the LT1280ACN pinout?
Use the pin-description table and package drawing in the official Analog Devices LT1280A datasheet for the authoritative LT1280ACN pinout. The public product information confirms that the device is an 18-pin PDIP RS-232 transceiver, while the page’s pin diagram is set to the default package graphic because the library does not contain an exact 18-pin PDIP drawing. Do not infer connections from the driver and receiver channel counts alone.
What external capacitors does the LT1280ACN require?
The LT1280ACN uses only 0.1 uF external capacitors for its charge-pump function. This is stated in the Analog Devices product description for the LT1280A family and distinguishes the part from RS-232 transceivers that require larger charge-pump capacitors. Place the capacitors close to their designated pins, follow the manufacturer’s recommended layout, and select dielectric and voltage ratings appropriate for the actual circuit conditions.
How much power does the LT1280ACN consume?
The LT1280ACN consumes 40 mW according to the manufacturer’s product description for the LT1280A family. The device combines two drivers and two receivers with an internal charge pump while operating from one 5 V rail. Actual board-level consumption can vary with output loading, baud rate, and external-capacitor conditions, so use the datasheet test conditions when comparing the specified 40 mW figure with a complete design’s power budget.
What is the best drop-in replacement for the LT1280ACN?
The LT1280AIN#PBF is the closest documented same-manufacturer alternative because it is also an 18-pin PDIP dual RS-232 transceiver with the same 5 V, 0.1 uF-capacitor implementation and 250 kbps data-rate listing. The LT1280ACN#PBF is another documented 18-pin PDIP ordering variant with matching functional specifications. Confirm lifecycle, temperature grade, and production status in the manufacturer product table before treating either option as a production replacement.
Can LT1280AIN replace LT1280ACN?
Yes, the LT1280AIN can be considered a drop-in candidate because comparison data identifies matching PDIP 18-pin packages, consistent terminal arrangements, and equivalent key electrical characteristics. The documented comparison lists 4.5 V operation and 250 kbps performance for the comparison context, while the LT1280ACN family page identifies 5 V operation and operation up to 120 kbaud. Verify the exact limit values, grade, and datasheet before production substitution.
Is the LT1280ACN the same as LT1280ACN#PBF?
The LT1280ACN#PBF is the lead-free, RoHS-compliant ordering designation associated with the LT1280ACN’s 18-pin PDIP dual RS-232 transceiver configuration. Comparison listings describe both devices as full-duplex, 250 kbps, 18-pin PDIP parts. The suffix can indicate ordering, finish, or packaging distinctions, so use the manufacturer’s product-selection table to confirm whether the base and #PBF ordering codes are currently active and production equivalents.
When should I choose the LT1280ACN over another RS-232 transceiver?
Choose the LT1280ACN when a through-hole, 18-pin RS-232 design needs two transmit and two receive channels, single 5 V operation, low specified power consumption of 40 mW, and only 0.1 uF charge-pump capacitors. It is especially useful in industrial and instrumentation equipment where a rugged bipolar implementation and integrated ESD protection are priorities. For surface-mount production, lower-cost alternatives, or designs requiring a different data rate, compare the complete electrical and packaging specifications before selecting.
Is the LT1280ACN suitable for industrial control and instrumentation?
The LT1280ACN is suitable for industrial control and instrumentation interfaces that use RS-232 at up to 120 kbaud. Its commercial temperature grade, through-hole 18-pin PDIP package, low 40 mW power consumption, integrated charge pump, fault-tolerant bipolar design, and ESD protection align well with equipment-oriented serial ports. For deployment across severe temperature ranges or unusually long cables, verify operating-temperature limits, cable capacitance, and protection requirements in the datasheet.
Where can I buy the LT1280ACN and check current lead time?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and applicable quantity breaks for the LT1280ACN. The product is listed as a production LT1280A-family device, but current commercial availability can change with demand and regional inventory. Provide the exact 18-pin PDIP ordering code and required quantity so the quote can reflect the correct part configuration.
What are the key specifications engineers should know about the LT1280ACN?
The key LT1280ACN specifications are single 5 V operation, two RS-232 drivers, two receivers, an integrated charge pump, 0.1 uF external capacitors, 40 mW power consumption, operation up to 120 kbaud, commercial temperature grade, and an 18-pin PDIP package. The manufacturer also describes a rugged bipolar design with operating fault tolerance and ESD protection. These characteristics define its suitability for low-power, conventional through-hole RS-232 equipment.

נתוני עזר הנדסיים עבור LT1280ACN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LT1280ACN for a conventional through-hole RS-232 design that needs two transmit and two receive channels, one 5 V supply, and low specified power consumption. Its 18-pin PDIP package, 0.1 uF charge-pump capacitors, and operation up to 120 kbaud suit industrial controllers, test equipment, embedded accessories, and legacy peripherals. Select LT1280AIN or LT1280AIN#PBF when its documented ordering status is preferable after checking the exact electrical limits. Select LT1280ACN#PBF when that lead-free ordering designation is required and the manufacturer confirms it as the production option. No cross-brand drop-in equivalent was established from the available cross-reference results, so a different manufacturer should not be assumed to be pin-compatible without a separate footprint and electrical verification.

השוואה עם חלופות

פרמטר מוצר זה LT1280AIN#PBF LT1280AIN LT1280ACN#PBF LT1280ACN
Package 18-pin PDIP 18-pin PDIP 18-pin PDIP 18-pin PDIP 18-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Device Type Dual RS-232 driver/receiver Dual RS-232 driver/receiver Dual RS-232 driver/receiver Dual RS-232 driver/receiver Dual RS-232 driver/receiver
Number of Drivers 2 2 2 2 2
Number of Receivers 2 2 2 2 2
Supply Voltage 5 V 5 V 5 V 5 V 5 V
Data Rate Up to 120 kbaud 250 kbps listed in comparison data 250 kbps listed in comparison data 250 kbps listed in comparison data 250 kbps listed in comparison data
External Charge-Pump Capacitor 0.1 uF 0.1 uF 0.1 uF 0.1 uF 0.1 uF
Power Consumption 40 mW 40 mW for LT1280A family 40 mW for LT1280A family 40 mW for LT1280A family 40 mW for LT1280A family

מבדילים עיקריים

  • Low-power operation with a complete dual-channel interface (לעומתLT1780CN#PBF)
  • Small external charge-pump capacitor requirement (לעומתLT1280AIN#PBF)
  • Single-supply integrated charge pump (לעומתLT1280ACN#PBF)

הערות תכנון

Place the 0.1 uF charge-pump capacitors directly beside their associated LT1280ACN pins and keep the traces short. Follow the capacitor polarity and connection arrangement shown in the manufacturer datasheet. Because this is an 18-pin PDIP, maintain adequate spacing between adjacent signal pins and route the RS-232 driver outputs directly toward the connector while keeping receive inputs away from noisy driver traces.

Do not treat the 40 mW family description as a complete board-power calculation; actual consumption depends on operating conditions and loading. Likewise, use the authoritative datasheet limits rather than mixing the product-page 120 kbaud description with comparison-site 250 kbps values. Confirm supply tolerance, logic thresholds, driver output limits, receiver thresholds, and timing against the exact production ordering code before releasing a new design.

Keep the RS-232 driver traces away from sensitive receive and logic traces to reduce crosstalk. Connect the ground reference near the transceiver and provide a low-impedance return path for the interface. Although the device includes ESD protection, the datasheet does not remove the need for suitable system-level protection when the connector is exposed to severe transients or long outdoor cables.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The #PBF ordering suffix appears in distributor and comparison records, but no explicit compliance statement was available for the base LT1280ACN. AEC-Q100 is not applicable to this commercial RS-232 interface IC.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LT1280ACN datasheet LT1280ACN datasheet pdf LT1280ACN pinout LT1280ACN specifications LT1280ACN equivalent LT1280ACN replacement LT1280ACN cross reference LT1280ACN vs LT1280AIN LT1280ACN PDIP-18 footprint LT1280ACN 5V RS232 transceiver LT1280ACN price LT1280ACN stock Analog Devices LT1280ACN LT1280ACN industrial RS232 application

רכיבים ומונחים קשורים

Analog Devices Linear Technology LT1280ACN LT1280ACN#PBF LT1280AIN LT1280AIN#PBF LT1280A RS-232 transceiver dual driver/receiver line transceiver interface IC integrated charge pump 5 V power supply 120 kbaud 250 kbps 40 mW power consumption 0.1 uF capacitor ESD protection fault-tolerant bipolar design PDIP-18 DIP package family through-hole mounting industrial control equipment test and measurement instrumentation
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר