LT1280ACN - Dual RS-232 Transceiver, 5V, 18-DIP | Analog Devices
MPN: LT1280ACN ✓ AktifLT1280ACN Ringkasan
An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage levels used by RS-232 serial links. It sits between a host, controller, or data-processing system and an external serial port. The dual-driver and dual-receiver arrangement allows one LT1280ACN to support a full-duplex connection with two data paths, while the integrated charge pump generates the bipolar RS-232 voltage levels required by the interface standard from a single low-voltage supply.
The LT1280ACN is positioned for low-power, low-to-moderate-speed serial communication systems. Its 5 V supply operation, 120 kbaud capability, and low 40 mW power consumption make it suitable for industrial control equipment, instrumentation, computer peripherals, and embedded systems that use RS-232 links. The integral charge-pump design reduces the external support circuitry required for RS-232 level generation, while the 18-pin PDIP package supports conventional through-hole board assembly.
The rugged bipolar design provides operating fault tolerance and ESD protection according to the manufacturer datasheet description. These characteristics are particularly useful in industrial and equipment-facing environments where an RS-232 connector may be exposed to ESD events, wiring transients, or accidental short circuits. Designers should still provide appropriate system-level protection and correctly route the transceiver signals for reliable operation.
When selecting the LT1280ACN, confirm the 18-pin PDIP footprint, single 5 V supply requirement, external capacitor values, and the required data rate against the system interface. The commercial temperature grade and through-hole package make it appropriate for equipment designs that prioritize a conventional RS-232 transceiver with low power consumption and integrated charge-pump functionality.
This product summary combines the manufacturer device description, package information, and distributor technical listings for engineering selection. For a new design, use the manufacturer datasheet for absolute maximum ratings, electrical characteristics, timing information, pin functions, capacitor recommendations, and application details before finalizing the PCB layout.
Alternatif penggantian untuk LT1280ACN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
LT1280AIN#PBF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LT1280AIN
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LT1280ACN#PBF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LT1280ACN
✅ Drop-InKontak untuk harga
Lihat Datasheet →LT1280ACN Spesifikasi
| Product Type | Dual RS-232 driver/receiver pair |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Tegangan Pemuat | 5 V |
| Laju Data | 120 kbaud |
| Power Consumption | 40 mW |
| External Charge-Pump Capacitor | 0.1 uF |
| Integrated Charge Pump | Yes |
| Temperature Grade | Commercial |
| Package Type | 18-pin PDIP |
| Tipe Mounting | Through-hole |
| Number of Terminals | 18 |
| Package Code | DIP |
| Package Shape | Rectangular |
| ESD Protection | Integrated |
| Operating Fault Tolerance | Rugged bipolar design |
LT1280ACN rectangular Diamant Konfigurasi Panduan
Konfigurasi pin untuk LT1280ACN (rectangular pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk LT1280ACN.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LT1280ACN cocok untuk 6 aplikasis: Industrial Control Equipment, Test and Measurement Instrumentation, Computer Peripherals and Legacy Ports, Embedded Serial Communication, Telecommunications and Network Support Equipment, Security and Access-Control Systems.
Industrial Control Equipment
The LT1280ACN suits RS-232 service ports on industrial controllers, configuration tools, and remote I/O equipment. Its two drivers and two receivers support bidirectional serial communication from a single 5 V supply, while the integrated charge pump avoids a separate bipolar supply. Operation up to 120 kbaud is appropriate for supervisory links and legacy factory equipment. The 40 mW specified consumption is useful in compact panels, and the 18-pin PDIP supports conventional through-hole assembly.
Direkomendasikan
Test and Measurement Instrumentation
The LT1280ACN can provide the legacy RS-232 connection used by programmable instruments, bench equipment, and data-acquisition products. The integrated charge pump and 0.1 uF capacitors simplify the level-shifting section, leaving more board area for measurement circuitry. Two drivers and two receivers provide useful full-duplex channel flexibility. Its 120 kbaud family capability suits control and status traffic, while low 40 mW power consumption benefits portable or multi-instrument bench systems.
Direkomendasikan
Computer Peripherals and Legacy Ports
The LT1280ACN is appropriate for legacy serial ports in printers, scanners, industrial peripherals, and embedded accessories that still communicate through RS-232. A single 5 V rail simplifies system power design, and the integral charge pump produces the required bipolar signal levels internally. The dual-channel arrangement permits multiple serial paths on one board. Its commercial grade and PDIP-18 format are best matched to equipment designed for through-hole assembly and moderate data rates up to 120 kbaud.
Direkomendasikan
Embedded Serial Communication
The LT1280ACN can bridge a 5 V embedded controller to an RS-232 device when the system retains a legacy serial interface. Using two transmitters and two receivers allows separate command and status paths, while the integrated charge pump reduces external voltage-generation circuitry. The 40 mW specified power use is valuable in embedded equipment with constrained thermal budgets. Designers should check logic thresholds, timing, and cable capacitance against the manufacturer datasheet for the intended baud rate.
Direkomendasikan
Telecommunications and Network Support Equipment
The LT1280ACN can support maintenance, console, or equipment-control ports in telecommunications and network-support equipment that still uses RS-232. The 5 V supply requirement integrates easily with conventional telecommunications boards, and the fault-tolerant bipolar construction plus ESD protection add robustness around external connectors. The 120 kbaud family rate suits administrative and control links rather than high-speed data transfer. The PDIP-18 outline is especially convenient for legacy boards designed around through-hole interfaces.
Direkomendasikan
Security and Access-Control Systems
The LT1280ACN can be used in access-control panels, alarm controllers, and security equipment with an RS-232 configuration or programming interface. Its integrated ESD protection and operating fault tolerance are useful at connector-facing circuits exposed to user wiring. Two transmit and two receive channels provide flexibility for combining configuration and status connections. Low 40 mW power consumption helps compact panels, while the commercial temperature grade should be checked against the installation environment before deployment.
Direkomendasikan
Data referensi engineering untuk LT1280ACN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LT1280AIN#PBF | LT1280AIN | LT1280ACN#PBF | LT1280ACN |
|---|---|---|---|---|---|
| Package | 18-pin PDIP | 18-pin PDIP | 18-pin PDIP | 18-pin PDIP | 18-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Device Type | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver |
| Number of Drivers | 2 | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Data Rate | Up to 120 kbaud | 250 kbps listed in comparison data | 250 kbps listed in comparison data | 250 kbps listed in comparison data | 250 kbps listed in comparison data |
| External Charge-Pump Capacitor | 0.1 uF | 0.1 uF | 0.1 uF | 0.1 uF | 0.1 uF |
| Power Consumption | 40 mW | 40 mW for LT1280A family | 40 mW for LT1280A family | 40 mW for LT1280A family | 40 mW for LT1280A family |
Diferensiator Kunci
- Low-power operation with a complete dual-channel interface (vsLT1780CN#PBF)
- Small external charge-pump capacitor requirement (vsLT1280AIN#PBF)
- Single-supply integrated charge pump (vsLT1280ACN#PBF)
Catatan Desain
Place the 0.1 uF charge-pump capacitors directly beside their associated LT1280ACN pins and keep the traces short. Follow the capacitor polarity and connection arrangement shown in the manufacturer datasheet. Because this is an 18-pin PDIP, maintain adequate spacing between adjacent signal pins and route the RS-232 driver outputs directly toward the connector while keeping receive inputs away from noisy driver traces.
Do not treat the 40 mW family description as a complete board-power calculation; actual consumption depends on operating conditions and loading. Likewise, use the authoritative datasheet limits rather than mixing the product-page 120 kbaud description with comparison-site 250 kbps values. Confirm supply tolerance, logic thresholds, driver output limits, receiver thresholds, and timing against the exact production ordering code before releasing a new design.
Keep the RS-232 driver traces away from sensitive receive and logic traces to reduce crosstalk. Connect the ground reference near the transceiver and provide a low-impedance return path for the interface. Although the device includes ESD protection, the datasheet does not remove the need for suitable system-level protection when the connector is exposed to severe transients or long outdoor cables.
Informasi Konformitas
The #PBF ordering suffix appears in distributor and comparison records, but no explicit compliance statement was available for the base LT1280ACN. AEC-Q100 is not applicable to this commercial RS-232 interface IC.