M2GL050-FG896I - 56K LE Industrial IGLOO2 FPGA | Microchip
MPN: M2GL050-FG896I ✓ פעילM2GL050-FG896I סקירה
An FPGA is a programmable semiconductor whose digital logic is defined after fabrication through a configuration bitstream. Within the semiconductor hierarchy, the M2GL050-FG896I belongs to the low-density IGLOO2 FPGA family. Compared with a fixed-function programmable logic device, an FPGA can implement combinational logic, sequential logic, interfaces, and parallel processing functions in one reconfigurable device. The M2GL050 is intended for general-purpose functions such as bridging, I/O expansion, conversion, system management, and secure connectivity.
The principal design strengths of the M2GL050-FG896I are its 56,340 logic elements, 377 I/O positions, and 896-ball package. The large I/O count supports designs that connect multiple external buses or peripherals without requiring several support devices. The low-density IGLOO2 architecture provides a practical balance between programmable logic capacity and board complexity, while on-chip flash allows the configuration to be retained without continuously operating an external configuration memory device.
The device belongs to the IGLOO2 low-density FPGA generation and is identified by the manufacturer as being in production. Its 1.2 V core operates from a low-voltage digital supply, while the industrial-grade ordering code supports designs intended for industrial environments. The 896-BGA package also demands careful PCB layout because its dense ball array requires via-in-pad or via-under-bump construction and controlled escape routing to achieve useful board-level performance.
Typical applications include industrial protocol bridging, parallel data acquisition, sensor and actuator interfacing, embedded control, system-management logic, and secure connectivity. The 377 I/O positions are especially useful when a design must connect legacy parallel logic to a more compact control structure. The IGLOO2 family also supports reprogrammable hardware that can adapt to different protocols, interface revisions, or field-updatable configurations.
For a new board, follow the Microchip IGLOO2 package, power, decoupling, configuration, and high-speed layout guidance exactly. Treat the BGA escape strategy and clean supply distribution as first-order layout constraints rather than late PCB refinements. Firmware and bitstream integration should also follow the device programming and validation requirements documented for the selected IGLOO2 device.
This product page combines the exact orderable MPN, package identity, logic-cell count, I/O count, lifecycle indication, comparison options, and application-focused design guidance. It also distinguishes true same-footprint alternatives from related IGLOO2 devices that use different packages and therefore require PCB redesign before they can replace the M2GL050-FG896I.
חלופות תחליף ישיר עבור M2GL050-FG896I — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם M2GL050-FG896I (אותו גורם צורה וטביעת רגל) — שונים ב Device Type, Configuration Memory, Package.
M2GL050-FG896
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←M2GL050-FG896I דירוגים מרביים ומאפיינים חשמליים
| Device Type | Low-density IGLOO2 FPGA |
| Logic Elements | 56,340 logic elements |
| User I/O | 377 I/O |
| Core Voltage | 1.2 V |
| מארז | 896-ball BGA |
| Total Terminals | 896 terminals |
| Temperature Grade | Industrial |
| סוג הרכבה | Surface mount |
| Terminal Form | Ball |
| Package Shape | Square |
| Programmable Technology | Flash FPGA |
| Configuration Memory | On-chip flash configuration |
| Product Status | In production |
| Logic Families Supported | Combinational and sequential digital logic |
מדריך תצורת פינים של M2GL050-FG896I square
תצורת פינים עבור M2GL050-FG896I (מארזת square). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור M2GL050-FG896I.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
M2GL050-FG896I מתאים עבור 6 יישוםs: Industrial Protocol Bridging, Parallel Data Acquisition, Sensor and Actuator Interfacing, Embedded System Control, Secure Connectivity and Authentication, Programmable Logic Consolidation.
Industrial Protocol Bridging
The M2GL050-FG896I is suited to industrial protocol bridging because its 377 user I/O positions can support multiple parallel interfaces while 56,340 logic elements provide space for protocol conversion and control state machines. The device can bridge legacy peripheral buses to a more compact FPGA-based controller without requiring a separate large PLD for every converter. The 1.2 V core minimizes digital supply demand, although the 896-ball BGA requires a multilayer PCB with carefully planned power, ground, and signal-escape routing.
מומלץ
Parallel Data Acquisition
For parallel data-acquisition systems, the M2GL050-FG896I provides 377 I/O positions for connecting wide sensor, counter, or instrument buses. Its 56,340 logic elements can support sampling control, trigger logic, filtering, buffering, and packing of acquired data into a serial interface. The industrial-temperature ordering code supports designs intended for industrial operating conditions. Engineers should verify acquisition timing and I/O standards against the IGLOO2 datasheet and design the BGA escape layer for the required signal bandwidth.
מומלץ
Sensor and Actuator Interfacing
The 377 user I/O positions allow the M2GL050-FG896I to consolidate multiple digital sensors, switches, encoders, and actuator controls into one programmable logic device. With 56,340 logic elements, it can implement conditioning, debouncing, state management, fault detection, and timing functions around those external signals. The flash FPGA architecture supports configuration retention and field updates, while the industrial-grade designation is relevant to equipment operating beyond benign laboratory conditions.
מומלץ
Embedded System Control
The M2GL050-FG896I can act as a dedicated system-control FPGA alongside a host processor, implementing boot sequencing, watchdog behavior, interrupt aggregation, peripheral arbitration, and power-state management. Its 56,340 logic elements provide substantial configurable control capacity, while 377 I/O positions simplify connections among processors, memory interfaces, and discrete peripherals. The 1.2 V core reduces core-rail complexity, but system power sequencing, configuration startup, and BGA decoupling must be designed together.
מומלץ
Secure Connectivity and Authentication
Microchip identifies secure connectivity as an intended use for the IGLOO2 low-density family, and the M2GL050-FG896I provides 56,340 logic elements for protocol engines, message formatting, key-handling control logic, and authenticated data paths. Its 377 I/O positions can accommodate external communication devices and status interfaces. The part's flash-based configuration supports a stable field-updatable design, although security assurance depends on the complete implementation, key lifecycle, and correctly protected programming and configuration workflow.
מומלץ
Programmable Logic Consolidation
The M2GL050-FG896I can consolidate several small programmable-logic functions into one device, including glue logic, state machines, bus arbitration, protocol conversion, and I/O expansion. Consolidating those functions benefits from 56,340 logic elements and 377 user I/O in a single 896-ball package. It can simplify firmware partitioning and reduce separate support-device count, but migration requires checking every ball assignment and configuration dependency. For functional replacement, the M2GL050-FG896 offers a closely related ordering option.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור M2GL050-FG896I — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | M2GL050-FG896 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 896-BGA | 896-BGA |
| Device Family | IGLOO2 low-density FPGA | IGLOO2 low-density FPGA |
| Logic Elements | 56,340 | 56,340 |
| User I/O | 377 | 377 |
| Core Voltage | 1.2 V | 1.2 V |
| Temperature Grade | Industrial | Non-industrial suffix; exact limits require confirmation |
| Programmable Technology | Flash FPGA | Flash FPGA |
| Configuration Support | On-chip flash configuration | On-chip flash configuration |
מבדילים עיקריים
- High-density programmable connectivity in one device (לעומתM2GL050-FG896)
- Large logic implementation capacity (לעומתM2GL050-FG896)
- Extensive I/O availability (לעומתM2GL050-FG896)
- Single-device consolidation of control functions (לעומתM2GL050-FG896)
הערות תכנון
Design the 896-ball BGA escape layer before placing the functional logic. Use the manufacturer's package drawing and recommended via arrangement, then route high-speed, clock, configuration, and sensitive I/O nets with controlled length and impedance. The dense package offers 377 user I/O, but that connectivity is useful only if power, ground, and signal escapes do not compromise each other. Validate the complete stack-up, via-in-pad process, solder-mask definition, and assembly capability before release.
Partition the 1.2 V core rail and other supply requirements according to Microchip's IGLOO2 power architecture. Place required decoupling capacitance at the relevant package balls, maintain a low-impedance distribution plane, and isolate noisy return paths from configuration and sensitive interfaces. Check simultaneous switching activity and core current in the datasheet power-estimation guidance before choosing regulator capacity, because a low core voltage does not eliminate board-level supply integrity requirements.
Do not treat related M2GL050 devices as interchangeable without reviewing the complete ordering suffix, temperature grade, package drawing, pin table, and configuration documentation. A device with the same family name or logic-element count can differ in I/O implementation, supply requirements, or package details. For M2GL050-FG896I, use Microchip datasheet DS00004750 and the exact package documentation as the authority for the PCB and programming design.
Keep configuration signals, clock inputs, and high-fanout routing away from noisy switching nodes, and follow the manufacturer's guidance for clock and I/O standards. Use the 377 available I/O strategically: assign the most timing-sensitive interfaces according to bank and performance constraints rather than by placement convenience. Review unused balls, dedicated configuration pins, and power balls directly from the manufacturer pin-description table instead of inferring them from the commercial package outline.
מידע על תאימות
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were included in the product information. The I suffix identifies an industrial temperature grade, but it does not by itself establish automotive qualification.
