Analog Devices

MAX232ESE+T - 120kbps RS-232 Transceiver | Analog Devices

MPN: MAX232ESE+T ✓ פעיל
4.5 V to 5.5 V Vdss 16-pin SOIC Package
כמות הזמנה מינימלית: 1 |

MAX232ESE+T סקירה

The Analog Devices MAX232ESE+T is a +5 V-powered, two-driver and two-receiver RS-232 transceiver packaged in a 16-pin SOIC. It supports data rates up to 120 kbps and implements EIA/TIA-232E and V.28/V.24-compatible communications interfaces. Its integrated capacitive voltage generator produces the bipolar RS-232 voltage levels required by the driver outputs from a single 5 V supply, avoiding a separate negative power rail.

An RS-232 transceiver is an interface IC that combines a transmitter and receiver in one package. A line driver converts logic-level signals into differential, bipolar RS-232 signals, while a line receiver converts bipolar signals back into logic levels. The MAX232ESE+T belongs to the broader RS-232 interface transceiver category, where EIA/TIA-232E, V.28, and V.24 define the electrical behavior and communication characteristics of the interface.

The device includes two transmit channels and two receive channels in a 16-pin SOIC. According to the manufacturer product page, the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. This makes the part suitable for legacy serial ports, industrial equipment, service interfaces, and embedded systems that retain an RS-232 connection.

The MAX232ESE+T combines a +5 V supply with on-chip charge-pump circuitry for the negative driver voltage. This integration allows the interface to operate without a separate negative supply, while the capacitive charge pump adds only a small number of external charge-pump capacitors. The E designation denotes the enhanced MAX232 family, while the suffix identifies the package, temperature option, and lead-free tape-and-reel shipping configuration.

Typical uses include RS-232 links between industrial controllers and service equipment, configuration ports on network appliances, legacy printer and instrument interfaces, and diagnostic connections on embedded systems. Designers should treat the RS-232 driver outputs as not tolerant of the negative voltages found on telephone lines, and they should provide the charge-pump and interface capacitors specified by the manufacturer.

For PCB layout, place the charge-pump capacitors and VCC bypass capacitor close to their associated device pins, and route each driver output directly to its RS-232 connector. Keep logic-side traces away from the higher-voltage driver outputs to reduce capacitive coupling and data errors, especially when long connector cables are attached.

This product page combines the manufacturer’s device description, distributor package identification, lifecycle information, replacement analysis, and practical RS-232 layout guidance. It is intended to help engineers verify electrical fit, package compatibility, sourcing requirements, and board-level implementation before committing a MAX232ESE+T to a new or existing design.

חלופות תחליף ישיר עבור MAX232ESE+T — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX232ESE+T (אותו גורם צורה וטביעת רגל) — שונים ב Product Type, Operating Temperature Range, Interface Standard, Package, Supply Voltage.

Analog Devices
Product Type: RS-232 transceiver
Package: 16-pin wide SOIC
Supply Voltage: +5 V
השווה עם MAX232ESE+T →
Analog Devices
Product Type: RS-232 transceiver
Operating Temperature Range: -40°C to +125°C
Supply Voltage: +5 V
השווה עם MAX232ESE+T →
Maxim Integrated
Product Type: RS-232 transceiver
השווה עם MAX232ESE+T →
Analog Devices
Product Type: 2/2 full RS-232 transceiver
Operating Temperature Range: -40°C to +125°C
Interface Standard: RS-232
השווה עם MAX232ESE+T →
Analog Devices
Operating Temperature Range: 0 °C to +70 °C (commercial C-grade)
Package: 16-pin Narrow SOIC (SOIC-N-16)
השווה עם MAX232ESE+T →
Texas Instruments
Product Type: Dual RS-232 driver/receiver transceiver
Operating Temperature Range: 0 °C to 70 °C
Interface Standard: EIA-232 / V.28
השווה עם MAX232ESE+T →
Texas Instruments
Operating Temperature Range: 0 C to +70 C
Supply Voltage: 5 V
השווה עם MAX232ESE+T →
Maxim Integrated
Product Type: Dual RS-232 line driver and receiver transceiver
Interface Standard: EIA/TIA-232E
השווה עם MAX232ESE+T →
Texas Instruments
Operating Temperature Range: -40°C to +85°C
Interface Standard: TIA/EIA-232-F
השווה עם MAX232ESE+T →

MAX232EESE

✅ Drop-In
📦 16-SOIC
Same 120 kbps MAX232E-family class and 16-pin SOIC footprint; temperature-grade and lifecycle suffix differences must be confirmed.

📋 חלופה להתייחסות (לא בקטלוג)

MAX232EIDWG4

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 line-driver and receiver transceiver · 2 · 2 · 2 transmit and 2 receive channels · RS-232 / EIA-232 · 5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232ECDWRG4

✅ Drop-In
Texas Instruments
📦 16-SOIC
2 drivers · 2 receivers · RS-232 transceiver · 120 kbit/s · 5 V · 1.0 uF each · -30 V to +30 V · IEC 61000-4-2

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232CSE+T

✅ Drop-In
Analog Devices
📦 16-SOIC
RS-232 Line Driver/Receiver (Transceiver) · 2 · 2 · RS-232 (EIA/TIA-232E, V.28/V.24) · 4.5 V to 5.5 V (single +5V supply) · 120 kb/s · ±7.5 V minimum (typical ±9 V) into 3 kΩ load · ±30 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX202ECWE+T

✅ Drop-In
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 · 2 · Full duplex · 120 kbps · +5 V · ±15 kV human body model · EIA/TIA-232E and CCITT V.28

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX232ESE+T מפרטים

Product Type RS-232 transceiver interface IC
Driver and Receiver Configuration 2 drivers and 2 receivers
מתח אספקה 4.5 V to 5.5 V
Maximum Data Rate 120 kbps
Interface Standard EIA/TIA-232E and CCITT V.28
Supported Voltage Interface V.28 and V.24
Negative Rail Generation On-chip capacitive voltage generator
מספר פינים 16 pins
מארז 16-pin SOIC
סוג הרכבה Surface mount
Lead-Free Status Lead-free ordering suffix
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

מדריך תצורת פינים של MAX232ESE+T 16-pin soic

תצורת פינים עבור MAX232ESE+T (מארזת 16-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin soic עבור MAX232ESE+T

אין נתוני פריסת פינים מפורטים עבור MAX232ESE+T.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX232ESE+T מתאים עבור 6 יישוםs: Industrial Controller Serial Port, Network Equipment Configuration Port, Test and Measurement Instrument, Legacy Printer Interface, Embedded System Debug Interface, Serial Port Expansion.

🏭

Industrial Controller Serial Port

The MAX232ESE+T is suitable for adding a legacy RS-232 service port to an industrial controller that operates from a 4.5 V to 5.5 V supply. Its two-driver and two-receiver arrangement supports bidirectional communication on one interface, while the manufacturer-rated 120 kbps rate is appropriate for configuration tools, diagnostic software, and supervisory equipment. The integrated charge-pump architecture generates the negative RS-232 voltage without requiring a separate negative rail, simplifying the power architecture. PCB implementation should preserve short charge-pump capacitor connections and isolate the bipolar driver traces from sensitive logic and sensor signals.

🌐

Network Equipment Configuration Port

The MAX232ESE+T provides a conventional RS-232 connection for configuring or servicing network equipment from a legacy terminal or service laptop. Two full RS-232 channels allow command and status traffic when the host equipment uses separate transmit and receive paths. The MAX232ESE+T supports rates up to 120 kbps, which is sufficient for configuration menus, diagnostic logs, and boot-loader interfaces. Its 16-pin SOIC package simplifies rework and footprint reuse, while the +5 V operation permits implementation alongside modern digital control logic. Connector-side surge and signal-conditioning requirements should be handled separately from the IC interface.

🔧

Test and Measurement Instrument

The MAX232ESE+T can bridge a modern instrument controller to equipment that exposes an RS-232 command or measurement port. At the maximum 120 kbps supported by the MAX232E family, the interface is well suited to short control protocols, instrument identification queries, and transfer of moderate-sized configuration or measurement blocks. The integrated charge pump means the test equipment does not need to generate a negative RS-232 supply. Designers should use the manufacturer-recommended charge-pump and bypass capacitors and keep the connector interface physically separated from sensitive analog measurement circuitry to minimize coupling.

🖥️

Legacy Printer Interface

The MAX232ESE+T can provide the electrical interface between a controller and a legacy RS-232 printer or terminal. Two drivers and two receivers permit full-duplex command and status communication, and the 120 kbps capability is more than adequate for printer control and receipt-data transfer. Because the device operates from a +5 V supply and creates the required negative voltage internally, it is particularly useful for embedded controller boards that no longer provide a negative rail. The PCB should route each channel to the correct connector signal, and protection components should be selected for the actual cable environment and grounding arrangement.

🧩

Embedded System Debug Interface

The MAX232ESE+T is appropriate for a manufacturing or field-debug interface on an embedded control system. The 120 kbps interface can carry bootloader messages, diagnostic logs, firmware status, and configuration data without requiring a separate negative supply. Its 16-pin SOIC package supports compact board layouts and straightforward assembly, while the two-channel arrangement can support either one complete RS-232 port plus auxiliary signals or split communication paths. Firmware should match the serial baud rate, framing, parity, and handshake behavior to the physical connection, and production software should avoid relying on undocumented driver-enable timing.

🔌

Serial Port Expansion

The MAX232ESE+T can expand a system that already uses a UART but requires a standards-compliant RS-232 electrical interface. Connecting the UART logic signals to the MAX232 drivers and receivers creates a robust port for peripherals, service tools, or upstream control equipment. The 120 kbps operating rate supports conventional asynchronous serial communications, and the integrated charge pump reduces the power-supply complexity relative to discrete driver-receiver implementations using external negative supplies. Correct implementation requires the specified external capacitors, suitable ground references, and deliberate separation between logic-side and connector-side traces.

What is the MAX232ESE+T?
The MAX232ESE+T is a +5 V-powered RS-232 transceiver with two drivers and two receivers in a 16-pin SOIC package. According to the Analog Devices MAX232E product page, it supports RS-232 data rates up to 120 kbps and uses an on-chip capacitive voltage generator to create the bipolar voltage required by the driver outputs from a single positive supply.
What are the key specifications of MAX232ESE+T that engineers should know?
The MAX232ESE+T combines two RS-232 drivers, two receivers, a 4.5 V to 5.5 V operating range, and a maximum data rate of 120 kbps in a 16-pin SOIC. The Analog Devices product page states that the MAX232E family complies with EIA/TIA-232E and CCITT V.28 specifications when loaded, while its charge-pump architecture eliminates the need for a separate negative supply rail.
Where can I download the MAX232ESE+T datasheet PDF?
The official MAX232E documentation is available from the Analog Devices product page at https://www.analog.com/en/products/max232e.html. Use the manufacturer’s datasheet and package drawings to confirm the complete pin assignment, external capacitor requirements, absolute maximum ratings, and recommended operating conditions before finalizing the PCB layout or schematic.
Where can I find the MAX232ESE+T pinout?
The MAX232ESE+T pinout is shown in the pin-description and package-drawing sections of the official MAX232E manufacturer documentation. The device uses a 16-pin SOIC and includes supply, ground, charge-pump capacitor, driver-output, receiver-input, and driver-enable connections. Assign PCB tracks directly from that pin-description table rather than inferring functions from connector or logic-side signal names.
Is MAX232ESE+T suitable for industrial equipment?
The MAX232ESE+T is suitable for equipment that requires a standard 120 kbps RS-232 interface and operates from a 4.5 V to 5.5 V supply. Its EIA/TIA-232E and V.28 compatibility supports established industrial communication links, although the specific operating-temperature grade and regulatory requirements should be checked against the product ordering information and the finished equipment’s environmental specification.
Does MAX232ESE+T need a negative power supply?
No. The MAX232ESE+T generates the negative RS-232 voltage internally with its capacitive voltage generator and charge-pump capacitors. According to the manufacturer’s MAX232E product description, this architecture is intended for applications where negative ±12 V supplies are not available, allowing the interface to operate from the device’s +5 V supply.
Where to buy MAX232ESE+T online?
Use the “Request a Quote” form on this page to request MAX232ESE+T availability, current pricing, and lead time for the exact 16-pin SOIC ordering configuration. The form is the appropriate route for checking stock and obtaining a purchase quotation without relying on an unverified listing price or assuming that another package or temperature variant is interchangeable.
What is the price of MAX232ESE+T?
The current price for MAX232ESE+T should be requested through the “Request a Quote” form on this page. The form preserves the exact MPN and ordering suffix so the quotation corresponds to the required 16-pin SOIC device rather than a related MAX232, MAX202, or SP3232 family member with different specifications or lifecycle terms.
What is the lead time for MAX232ESE+T?
Request the current lead time through the “Request a Quote” form on this page. Lead time can vary with the exact package suffix, order quantity, manufacturing status, and inventory position, so confirm the production quantity and target delivery date in the quotation response rather than relying on a generic listing statement.
Is MAX232ESE+T in stock?
Current MAX232ESE+T stock should be confirmed through the “Request a Quote” form on this page. Submit the required quantity and, if relevant, the assembly schedule so the supplier can check the exact MPN and suffix rather than a broader MAX232E family listing.
What is the best drop-in replacement for MAX232ESE+T?
The closest drop-in choices depend on temperature grade, package marking, and lifecycle requirements. MAX232EESE, MAX232EIDWG4, MAX232ECDWRG4, and MAX232CSE+T appear in the cited MAX232 cross-reference and comparison material as package-related candidates, but each ordering code must be checked for its exact pinout, temperature range, and qualification before it is approved as a drop-in replacement.
Can MAX232EESE replace MAX232ESE+T?
MAX232EESE is a 16-pin SOIC MAX232-family device and is a candidate for replacement, but a drop-in claim must also confirm matching enable-pin behavior, temperature grade, and lifecycle status. The cited DigiKey result identifies MAX232EESE as a 2/2 full-RS-232 transceiver in a 16-pin SOIC, supporting package compatibility, while the exact suffix differences remain subject to manufacturer ordering documentation.
MAX232ESE+T vs MAX232EIDWG4 - which is better for an industrial design?
Choose MAX232EIDWG4 only if its manufacturer ordering code confirms the required industrial temperature range and the same 16-pin SOIC footprint. Both parts belong to the enhanced MAX232E interface family, but their suffix codes can distinguish temperature grade, package marking, and lifecycle status. For an existing MAX232ESE+T PCB, verify the complete pin and parameter comparison before changing the bill of materials.
When should I choose MAX232ESE+T over MAX202ECWE+T?
Choose MAX232ESE+T when the design specifically requires the enhanced MAX232E feature set and verified 120 kbps operation. MAX202ECWE+T may serve as a related +5 V RS-232 transceiver candidate, but its exact receiver, driver, timing, temperature, and package characteristics must be confirmed from its datasheet. The decision should follow a complete electrical comparison rather than package similarity alone.
Is SP3232EEN-L the same as MAX232ESE+T?
SP3232EEN-L is not automatically identical to MAX232ESE+T even though both are 16-pin RS-232 transceiver candidates. The cited comparison identifies it as a competing interface family, but differences in data rate, driver and receiver thresholds, supply range, fault behavior, temperature grade, and active-low enable handling must be reviewed before it can be treated as a drop-in substitute.

נתוני עזר הנדסיים עבור MAX232ESE+T — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX232ESE+T when a new or existing design requires a +5 V, 120 kbps RS-232 interface with two drivers and two receivers in a 16-pin SOIC. Its integrated charge-pump architecture is particularly useful when the board has no negative supply rail. MAX232EESE, MAX232EIDWG4, MAX232ECDWRG4, and MAX232CSE+T are appropriate package-family alternatives when their suffix-specific temperature grade, qualification, marking, and lifecycle status match the product requirements. Consider MAX202ECWE+T only when its complete electrical characteristics satisfy the interface design; although it uses a similar +5 V RS-232 topology, it belongs to a different family and is not selected solely because the package matches. For every alternative, verify enable polarity, receiver thresholds, driver levels, external capacitor values, operating temperature, and the exact manufacturer ordering code before approving a drop-in substitution.

השוואה עם חלופות

פרמטר מוצר זה MAX232EESE MAX232EIDWG4 MAX232ECDWRG4 MAX232CSE+T MAX202ECWE+T
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver MAX232E RS-232 transceiver MAX232E RS-232 transceiver MAX232 RS-232 transceiver MAX202 RS-232 transceiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Number of Pins 16 pins 16 pins 16 pins 16 pins 16 pins 16 pins
Negative Voltage Generation Integrated capacitive voltage generator Integrated capacitive voltage generator Integrated capacitive voltage generator Integrated capacitive voltage generator Integrated capacitive voltage generator Integrated capacitive voltage generator
Ordering Suffix ESE+T lead-free tape-and-reel configuration ESE without +T EIDWG4 ECDWRG4 CSE+T ECWE+T

מבדילים עיקריים

  • Single-supply RS-232 operation (לעומתMAX202ECWE+T)
  • Full-duplex channel count in a 16-pin SOIC (לעומתMAX232EESE)
  • Established 120 kbps MAX232E positioning (לעומתMAX232CSE+T)
  • Package-compatible consolidation (לעומתMAX232EIDWG4)

הערות תכנון

Place the external charge-pump capacitors and the VCC bypass capacitor directly beside their associated MAX232ESE+T pins. Keep the charge-pump current loop compact, use a short ground return, and connect the bypass capacitor to the same quiet ground reference used by the device. This minimizes switching transients at the supply pins and helps preserve command integrity when the RS-232 line is active.

Separate logic-side UART traces from RS-232 connector-side driver outputs. Avoid routing driver outputs parallel to clocks, ADC inputs, or sensitive analog signals, and avoid routing beneath long connector or protection components. Where the cable interface is exposed to substantial electrostatic discharge, add a protection strategy that is compatible with the connector and ground architecture rather than relying on the transceiver alone.

Do not treat the MAX232E driver outputs as telephone-line or ±12 V tolerant. Confirm enable polarity, supply voltage, baud rate, framing, and connector signal assignments against the manufacturer datasheet before fabrication. Also verify the exact ESE and +T ordering suffix because related MAX232 and MAX202 variants can share a 16-pin SOIC outline while differing in temperature grade, qualification, or lifecycle status.

Decouple VCC at the device rather than relying on a distant regulator capacitor. The MAX232ESE+T operates from a 4.5 V to 5.5 V supply, and its charge-pump circuitry requires the external capacitors specified by the manufacturer. Keep the charge-pump capacitor loop short and provide an adequate local ground path so switching activity does not disturb nearby digital or analog circuitry.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Yes
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The +T ordering suffix identifies the lead-free tape-and-reel configuration. RoHS, REACH, halogen-free, and conflict-minerals status were not confirmed from the cited manufacturer pages.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX232ESE+T datasheet MAX232ESE+T pinout MAX232ESE+T datasheet pdf MAX232ESE+T equivalent MAX232ESE+T replacement MAX232ESE+T cross reference MAX232ESE+T vs MAX232EIDWG4 MAX232ESE+T footprint MAX232ESE+T price MAX232ESE+T stock Analog Devices MAX232ESE+T MAX232E 120kbps RS-232 MAX232ESE+T 16-SOIC MAX232ESE+T industrial serial port

רכיבים ומונחים קשורים

Analog Devices MAX232ESE+T MAX232E MAX232EESE MAX232EIDWG4 MAX232ECDWRG4 MAX232CSE+T MAX202ECWE+T RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor EIA/TIA-232E CCITT V.28 V.24 120 kbps +5 V power supply capacitive voltage generator 16-pin SOIC surface mount RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר