Analog Devices

MAX311CWN+ - 8-Channel CMOS RF Video Multiplexer | Analog Devices

MPN: MAX311CWN+ ✓ פעיל
+4.5 V to +16.5 V Vdss 150 ohm Rds(on) 18-pin SOIC Package
כמות הזמנה מינימלית: 1 |

MAX311CWN+ סקירה

Analog Devices MAX311CWN+ is an 8-channel CMOS RF video multiplexer with a dual 4:1 configuration, 150 ohm on-resistance, and operation across positive and negative supply ranges of +4.5 V to +16.5 V and -16.5 V to -4.5 V. The device is packaged in an 18-pin SOIC for surface-mount PCB integration.

An RF video multiplexer is a semiconductor switch used to route multiple high-frequency or video signals through a shared signal path. Within the broader interface-IC hierarchy, the MAX311 belongs to the analog switch and multiplexer family, where CMOS switching elements control signal routing. Its dual 4:1 organization allows several sources to be selected toward downstream receiver, test, or signal-processing circuitry.

The MAX311CWN+ supports positive and negative supply rails, making it suitable for systems that require both polarities. Its specified 150 ohm on-resistance provides a defined impedance for routing calculations, while the eight-channel architecture consolidates multiple signal paths into one package. The 18-pin SOIC package supports conventional surface-mount assembly and is compatible with automated PCB manufacturing processes.

According to the Analog Devices MAX311 product page, the MAX311 is in production and is described as an 8-channel CMOS RF video multiplexer. Product documentation identifies the family as MAX311 with a data sheet revision of 0, but engineers should verify the complete pin description, control truth table, switching timing, bandwidth, channel capacitance, and absolute maximum ratings in the manufacturer data sheet before finalizing a design.

Typical uses include professional video routing, RF test equipment, video signal selection, broadcast and monitoring systems, and instrumentation that must choose among several RF or video inputs. The dual 4:1 structure can support paired routing or channel-selection functions when the system architecture requires two independent groups of four inputs.

The primary design consideration is signal integrity. Keep traces short, use a controlled-reference-ground layout, and account for the 150 ohm on-resistance when driving downstream inputs. Decoupling and protection requirements should follow the manufacturer application guidance because incorrect supply sequencing or signal overvoltage can damage a high-frequency analog switch.

This product page combines the manufacturer product identity, exact package and supply information, a confirmed direct replacement, practical routing guidance, and a structured comparison with less suitable interface alternatives. It supports faster component selection while preserving the checks needed for reliable RF and video circuit implementation.

חלופות תחליף ישיר עבור MAX311CWN+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX311CWN+ (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type, Signal Type.

Analog Devices
Package: 18-pin wide SOIC
Product Type: CMOS RF/Video Multiplexer
Signal Type: RF/Video
השווה עם MAX311CWN+ →

MAX311EWN+

✅ Drop-In
Analog Devices
📦 18-pin SOIC
Analog Devices · CMOS RF/Video Multiplexer · 8 channels · Multiplexer · CMOS · RF/Video · 18-pin wide SOIC · Surface Mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX311CWN+ מפרטים

Product Type 8-channel CMOS RF video multiplexer
Number of Channels 8 channels
Multiplexer Configuration Dual 4:1
On-Resistance 150 ohm
Positive Supply Voltage Range +4.5 V to +16.5 V
Negative Supply Voltage Range -16.5 V to -4.5 V
Signal Type RF and video
Switch Technology CMOS
מארז 18-pin SOIC
מספר פינים 18 pins
סוג הרכבה Surface mount
סטטוס מחזור חיים Production

מדריך תצורת פינים של MAX311CWN+ 18-pin soic

תצורת פינים עבור MAX311CWN+ (מארזת 18-pin soic). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 18-pin soic עבור MAX311CWN+

אין נתוני פריסת פינים מפורטים עבור MAX311CWN+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX311CWN+ מתאים עבור 6 יישוםs: Professional Video Signal Routing, RF Test Equipment Input Selection, Broadcast and Monitoring Systems, Video Signal Test Fixtures, RF and Video Patch Systems, Industrial Video Inspection Equipment.

📺

Professional Video Signal Routing

The MAX311CWN+ fits professional video routers because its 8-channel CMOS RF video multiplexer architecture can select among multiple inputs and consolidate routing into an 18-pin SOIC footprint. The dual 4:1 organization provides two groups of four channels for systems that route paired or related signals. Its 150 ohm on-resistance is the principal published impedance for signal-path analysis. The designer should compare its bandwidth, isolation, and switching time with the video format in use, then keep routed traces short and return to a continuous reference plane.

🔧

RF Test Equipment Input Selection

MAX311CWN+ is suitable for RF test equipment that must route several measured or stimulated signals through a shared input path. Its eight CMOS channels and dual 4:1 structure allow compact multiplexing, while operation on both positive and negative supply rails supports dual-polarity test architectures. The 150 ohm on-resistance must be included in the instrument-level impedance budget. Confirm channel capacitance, off-isolation, and bandwidth against the highest test frequency, and use controlled grounding to prevent the mux from becoming the dominant source of measurement error.

📡

Broadcast and Monitoring Systems

The MAX311CWN+ can support broadcast monitoring equipment that selects among several RF or video sources before downstream display, analysis, or recording stages. Eight channels in an 18-pin SOIC conserve board area compared with discrete routing networks, and the dual 4:1 arrangement can organize two signal groups. The design must preserve video bandwidth and minimize reflections around the 150 ohm switching element. Separate sensitive return paths from switching-control traces, use suitable bypass capacitance, and validate the complete channel with the longest cable and target termination in the test setup.

🧪

Video Signal Test Fixtures

MAX311CWN+ is appropriate for compact video test fixtures that expose several source channels to a common analysis path. The eight-channel CMOS device simplifies selection logic while the dual 4:1 organization supports structured pair selection. Its positive supply range of +4.5 V to +16.5 V and negative range of -16.5 V to -4.5 V allow integration with dual-polarity test circuitry. Validate insertion loss, channel-to-channel isolation, and switching time over the complete temperature range, and provide clean references and local bypass capacitance around the device.

🌐

RF and Video Patch Systems

The MAX311CWN+ can serve as the switching element in an RF and video patch system where several inputs must be selected for downstream instrumentation. Its 8-channel CMOS implementation supports compact routing, and the 150 ohm on-resistance provides a defined basis for signal-loss estimates. Because patch systems may contain longer cables and multiple impedance transitions, engineers should validate bandwidth, insertion loss, and return loss in the assembled board. Place the mux close to the controlled source or receiver, maintain a continuous ground reference, and avoid routing control signals beneath sensitive RF paths.

🏭

Industrial Video Inspection Equipment

MAX311CWN+ can support industrial inspection equipment that selects video or RF-compatible inputs for analysis, triggering, or monitoring. Eight channels in a standard 18-pin SOIC allow multiple sensors or reference signals to share a processing path without a large discrete relay network. The dual 4:1 arrangement can support paired sensor selection where machine vision systems need related channels. Validate operation across the system's full temperature range and electromagnetic environment, provide local supply decoupling, and keep high-impedance or sensitive analog nodes away from the switching-control and supply-return paths.

What is MAX311CWN+ and what does it do?
MAX311CWN+ is an 8-channel CMOS RF video multiplexer with a dual 4:1 configuration and 150 ohm on-resistance. According to the Analog Devices MAX311 product page, the MAX311 is a production device intended for routing RF and video signals. The 18-pin SOIC package makes it suitable for conventional surface-mount assemblies where several input channels must share limited routing resources.
What are the key specifications of MAX311CWN+ that engineers should know?
The principal MAX311CWN+ specifications are 8 multiplexed channels, a dual 4:1 arrangement, 150 ohm on-resistance, dual-polarity supply operation, and an 18-pin SOIC package. According to the Analog Devices MAX311 product page, the device is a CMOS RF video multiplexer. The positive operating range is +4.5 V to +16.5 V, while the negative operating range is -16.5 V to -4.5 V.
What is the supply voltage range of MAX311CWN+?
MAX311CWN+ operates with positive supplies from +4.5 V to +16.5 V and negative supplies from -16.5 V to -4.5 V. According to the Analog Devices MAX311 product page, the device supports dual-polarity operation for RF and video routing. Confirm both rail magnitudes, sequencing, and grounding against the manufacturer data sheet before constructing the power supply and bypass network.
Where can I download the MAX311CWN+ datasheet PDF?
Download the MAX311CWN+ documentation from the official Analog Devices MAX311 product page at https://www.analog.com/en/products/max311.html. The manufacturer identifies the MAX311 data sheet as revision 0. Use that document for the authoritative pin descriptions, control logic, absolute maximum ratings, electrical characteristics, and recommended application circuits rather than relying on a distributor summary.
Where is the MAX311CWN+ pinout located?
The MAX311CWN+ pinout is located in the pin-description section of the Analog Devices MAX311 data sheet linked from the official product page. The device uses an 18-pin SOIC package. Consult the manufacturer's pin table and package drawing when assigning control inputs, supply rails, grounds, and RF or video channels, because exposed-pad conventions do not apply to this standard SOIC outline.
What is the best drop-in replacement for MAX311CWN+?
MAX311EWN+ is the confirmed drop-in candidate for MAX311CWN+. A component comparison identifies both devices as 18-pin SOIC parts with consistent terminals, package characteristics, and principal functional specifications, allowing replacement without PCB modification. Confirm the exact control truth table and electrical limits in the applicable manufacturer documentation before treating the substitution as final.
Can MAX311EWN+ replace MAX311CWN+?
Yes, MAX311EWN+ can replace MAX311CWN+ without modifying the existing 18-pin SOIC layout. The component comparison states that the terminals and packages are consistent and that the main performance and functional characteristics are equivalent. Before production use, compare supply limits, control logic, insertion loss, bandwidth, switching time, and absolute maximum ratings against the requirements of the original circuit.
MAX311CWN+ vs MAX311EWN+ — which is the better replacement?
MAX311EWN+ is the better drop-in choice when an existing MAX311CWN+ design needs a direct replacement because both use the same 18-pin SOIC footprint and are described as functionally and terminally consistent. The distinction is the exact manufacturer ordering code, so engineers should verify the required suffix, marking, qualification status, and production sourcing requirements rather than choosing from function alone.
What is the difference between MAX311CWN+ and MAX312ESE?
MAX311CWN+ is an 8-channel dual 4:1 RF video multiplexer in an 18-pin SOIC, while MAX312ESE is a different MAX-series interface device whose package and pin count do not match. A common Maxim family does not establish drop-in compatibility. Use MAX311EWN+ when an 18-pin pin-to-pin substitute is required, and redesign or adapt the layout if MAX312ESE is otherwise preferred.
When should I choose MAX311CWN+ over MAX312ESE?
Choose MAX311CWN+ when the design specifically requires its 8-channel CMOS RF video multiplexer architecture, dual 4:1 organization, 150 ohm on-resistance, and 18-pin SOIC footprint. MAX312ESE is not a pin-compatible substitute because its package differs. The selection should therefore follow the required channel count, supply architecture, control interface, and existing PCB footprint rather than only the shared manufacturer.
Is MAX311CWN+ suitable for RF video routing equipment?
Yes, MAX311CWN+ is specifically identified as an 8-channel CMOS RF video multiplexer, making it appropriate for RF and video signal selection in routing and test equipment. Its 150 ohm on-resistance and dual 4:1 configuration are the principal published electrical and functional characteristics. Verify bandwidth, insertion loss, channel capacitance, and isolation against the actual video standard before releasing the design.
What can replace MAX311CWN+?
MAX311EWN+ can replace MAX311CWN+ because the comparison identifies an 18-pin SOIC package, consistent terminals, and matching functional characteristics. No additional cross-brand drop-in candidate was confirmed for the exact footprint and function. Therefore, use MAX311EWN+ as the direct replacement option and verify timing, supply, and signal-integrity requirements in the final schematic review.
Is MAX311CWN+ the same as MAX311EWN+?
MAX311CWN+ and MAX311EWN+ are electrically and mechanically positioned as direct alternatives in the same 18-pin SOIC family, but they are not the same ordering code. A published comparison states that their terminals and packages are consistent and that replacement does not require circuit modification. Engineering approval should still include a final review of the manufacturer data sheet and required procurement suffix.
Where can I buy MAX311CWN+ and check its price?
Use the Request a Quote form on this page to request MAX311CWN+ pricing, stock confirmation, lead time, and order quantities from XAIPART. Commercial availability can change by package suffix, production status, and order volume, so obtain a current quotation for the exact MAX311CWN+ marking rather than relying on a family-level starting price or an approximate market figure.
What is the lead time and stock status for MAX311CWN+?
Request the current MAX311CWN+ stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The Analog Devices product page identifies the MAX311 family as production, but that lifecycle statement does not guarantee immediate inventory for every package suffix or order quantity. A current quotation provides the appropriate transactional confirmation for the exact part.

נתוני עזר הנדסיים עבור MAX311CWN+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX311CWN+ when the design needs an 8-channel CMOS RF video multiplexer in an 18-pin SOIC, particularly when the architecture uses its dual 4:1 organization or positive and negative supply rails. Select MAX311EWN+ when a direct 18-pin SOIC replacement is required and the manufacturer documentation confirms that its control, timing, and electrical characteristics satisfy the design. MAX312ESE and MAX310EWN can be considered only for new architectures after a functional and footprint review because they do not provide a confirmed drop-in path for MAX311CWN+. For existing boards, MAX311EWN+ is the preferred alternate because the published comparison identifies consistent terminals and package characteristics. For new high-frequency or precision-routing designs, verify bandwidth, channel capacitance, insertion loss, isolation, and switching time from the manufacturer data sheet before committing to either ordering code.

השוואה עם חלופות

פרמטר מוצר זה MAX311EWN+
Manufacturer Analog Devices Analog Devices
Package 18-pin SOIC 18-pin SOIC - same
Product Type 8-channel CMOS RF video multiplexer 8-channel CMOS RF video multiplexer
Multiplexer Configuration Dual 4:1 Dual 4:1
Number of Channels 8 channels 8 channels
On-Resistance 150 ohm 150 ohm
Positive Supply Voltage Range +4.5 V to +16.5 V +4.5 V to +16.5 V
Negative Supply Voltage Range -16.5 V to -4.5 V -16.5 V to -4.5 V

מבדילים עיקריים

  • Confirmed pin-compatible replacement path (לעומתMAX311EWN+)
  • Dual-polarity RF and video routing (לעומתMAX312ESE)
  • Compact eight-channel multiplexing (לעומתMAX310EWN)

הערות תכנון

Use the specified 150 ohm on-resistance as the starting point for the signal-path impedance budget, but do not treat it as a complete loss model. Bandwidth, channel capacitance, insertion loss, and off-isolation are not established on this page and must be taken from the manufacturer data sheet. Keep RF and video routes short, avoid unnecessary stubs, and provide a continuous reference plane beneath the routed channels.

Place local bypass capacitors close to the positive and negative supply pins, and route both supply returns directly to the device ground reference. Keep switching-control traces away from sensitive video or RF paths to reduce coupling into the selected channel. The 18-pin SOIC outline supports conventional surface-mount assembly, but the final footprint should be checked against the manufacturer package drawing rather than inferred from the generic outline name.

Do not infer pin functions from another MAX-series device. MAX312ESE and MAX311CWN+ are related products but do not share a drop-in footprint, and the MAX311EWN+ comparison should still be checked against the required control truth table. Also avoid designing around a family-level starting price or approximate distributor listing; request the exact MAX311CWN+ order code and current commercial terms through the quote form.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The Analog Devices product page identifies MAX311 as a production device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established and remain unknown.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX311CWN+ datasheet MAX311CWN+ datasheet pdf MAX311CWN+ pinout MAX311CWN+ specifications MAX311CWN+ equivalent MAX311CWN+ replacement MAX311CWN+ drop-in replacement MAX311CWN+ price MAX311CWN+ stock Analog Devices MAX311CWN+ MAX311CWN+ vs MAX311EWN+ MAX311CWN+ 18 pin SOIC MAX311CWN+ RF video multiplexer

רכיבים ומונחים קשורים

Analog Devices Maxim Integrated MAX311CWN+ MAX311 MAX311EWN+ MAX312ESE MAX310EWN RF video multiplexer analog multiplexer interface IC analog switch CMOS dual 4:1 multiplexer 8-channel multiplexer 150 ohm on-resistance 18-pin SOIC surface-mount package RF routing video routing dual-polarity supply signal integrity channel selection test equipment broadcast monitoring
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר