MAX311CWN+ - 8-Channel CMOS RF Video Multiplexer | Analog Devices
部品番号: MAX311CWN+ ✓ 生産中MAX311CWN+ 概要
An RF video multiplexer is a semiconductor switch used to route multiple high-frequency or video signals through a shared signal path. Within the broader interface-IC hierarchy, the MAX311 belongs to the analog switch and multiplexer family, where CMOS switching elements control signal routing. Its dual 4:1 organization allows several sources to be selected toward downstream receiver, test, or signal-processing circuitry.
The MAX311CWN+ supports positive and negative supply rails, making it suitable for systems that require both polarities. Its specified 150 ohm on-resistance provides a defined impedance for routing calculations, while the eight-channel architecture consolidates multiple signal paths into one package. The 18-pin SOIC package supports conventional surface-mount assembly and is compatible with automated PCB manufacturing processes.
According to the Analog Devices MAX311 product page, the MAX311 is in production and is described as an 8-channel CMOS RF video multiplexer. Product documentation identifies the family as MAX311 with a data sheet revision of 0, but engineers should verify the complete pin description, control truth table, switching timing, bandwidth, channel capacitance, and absolute maximum ratings in the manufacturer data sheet before finalizing a design.
Typical uses include professional video routing, RF test equipment, video signal selection, broadcast and monitoring systems, and instrumentation that must choose among several RF or video inputs. The dual 4:1 structure can support paired routing or channel-selection functions when the system architecture requires two independent groups of four inputs.
The primary design consideration is signal integrity. Keep traces short, use a controlled-reference-ground layout, and account for the 150 ohm on-resistance when driving downstream inputs. Decoupling and protection requirements should follow the manufacturer application guidance because incorrect supply sequencing or signal overvoltage can damage a high-frequency analog switch.
This product page combines the manufacturer product identity, exact package and supply information, a confirmed direct replacement, practical routing guidance, and a structured comparison with less suitable interface alternatives. It supports faster component selection while preserving the checks needed for reliable RF and video circuit implementation.
ドロップイン代替品: MAX311CWN+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX311CWN+ (同一形状・フットプリント) — 相違点: Package, Product Type, Signal Type.
MAX311EWN+
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX311CWN+ 仕様
| Product Type | 8-channel CMOS RF video multiplexer |
| Number of Channels | 8 channels |
| Multiplexer Configuration | Dual 4:1 |
| On-Resistance | 150 ohm |
| Positive Supply Voltage Range | +4.5 V to +16.5 V |
| Negative Supply Voltage Range | -16.5 V to -4.5 V |
| Signal Type | RF and video |
| Switch Technology | CMOS |
| パッケージ | 18-pin SOIC |
| ピン数 | 18 pins |
| 実装タイプ | Surface mount |
| ライフサイクル状態 | Production |
MAX311CWN+ 18-pin soic ピン配置ガイド
MAX311CWN+ (18-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX311CWN+.
詳細は データシート をご参照ください。
主な用途
MAX311CWN+ の用途: 6 件s: Professional Video Signal Routing, RF Test Equipment Input Selection, Broadcast and Monitoring Systems, Video Signal Test Fixtures, RF and Video Patch Systems, Industrial Video Inspection Equipment.
Professional Video Signal Routing
The MAX311CWN+ fits professional video routers because its 8-channel CMOS RF video multiplexer architecture can select among multiple inputs and consolidate routing into an 18-pin SOIC footprint. The dual 4:1 organization provides two groups of four channels for systems that route paired or related signals. Its 150 ohm on-resistance is the principal published impedance for signal-path analysis. The designer should compare its bandwidth, isolation, and switching time with the video format in use, then keep routed traces short and return to a continuous reference plane.
おすすめ
RF Test Equipment Input Selection
MAX311CWN+ is suitable for RF test equipment that must route several measured or stimulated signals through a shared input path. Its eight CMOS channels and dual 4:1 structure allow compact multiplexing, while operation on both positive and negative supply rails supports dual-polarity test architectures. The 150 ohm on-resistance must be included in the instrument-level impedance budget. Confirm channel capacitance, off-isolation, and bandwidth against the highest test frequency, and use controlled grounding to prevent the mux from becoming the dominant source of measurement error.
おすすめ
Broadcast and Monitoring Systems
The MAX311CWN+ can support broadcast monitoring equipment that selects among several RF or video sources before downstream display, analysis, or recording stages. Eight channels in an 18-pin SOIC conserve board area compared with discrete routing networks, and the dual 4:1 arrangement can organize two signal groups. The design must preserve video bandwidth and minimize reflections around the 150 ohm switching element. Separate sensitive return paths from switching-control traces, use suitable bypass capacitance, and validate the complete channel with the longest cable and target termination in the test setup.
おすすめ
Video Signal Test Fixtures
MAX311CWN+ is appropriate for compact video test fixtures that expose several source channels to a common analysis path. The eight-channel CMOS device simplifies selection logic while the dual 4:1 organization supports structured pair selection. Its positive supply range of +4.5 V to +16.5 V and negative range of -16.5 V to -4.5 V allow integration with dual-polarity test circuitry. Validate insertion loss, channel-to-channel isolation, and switching time over the complete temperature range, and provide clean references and local bypass capacitance around the device.
おすすめ
RF and Video Patch Systems
The MAX311CWN+ can serve as the switching element in an RF and video patch system where several inputs must be selected for downstream instrumentation. Its 8-channel CMOS implementation supports compact routing, and the 150 ohm on-resistance provides a defined basis for signal-loss estimates. Because patch systems may contain longer cables and multiple impedance transitions, engineers should validate bandwidth, insertion loss, and return loss in the assembled board. Place the mux close to the controlled source or receiver, maintain a continuous ground reference, and avoid routing control signals beneath sensitive RF paths.
おすすめ
Industrial Video Inspection Equipment
MAX311CWN+ can support industrial inspection equipment that selects video or RF-compatible inputs for analysis, triggering, or monitoring. Eight channels in a standard 18-pin SOIC allow multiple sensors or reference signals to share a processing path without a large discrete relay network. The dual 4:1 arrangement can support paired sensor selection where machine vision systems need related channels. Validate operation across the system's full temperature range and electromagnetic environment, provide local supply decoupling, and keep high-impedance or sensitive analog nodes away from the switching-control and supply-return paths.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX311CWN+ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX311EWN+ |
|---|---|---|
| Manufacturer | Analog Devices | Analog Devices |
| Package | 18-pin SOIC | 18-pin SOIC - same |
| Product Type | 8-channel CMOS RF video multiplexer | 8-channel CMOS RF video multiplexer |
| Multiplexer Configuration | Dual 4:1 | Dual 4:1 |
| Number of Channels | 8 channels | 8 channels |
| On-Resistance | 150 ohm | 150 ohm |
| Positive Supply Voltage Range | +4.5 V to +16.5 V | +4.5 V to +16.5 V |
| Negative Supply Voltage Range | -16.5 V to -4.5 V | -16.5 V to -4.5 V |
主な差別化要因
- Confirmed pin-compatible replacement path (vs MAX311EWN+)
- Dual-polarity RF and video routing (vs MAX312ESE)
- Compact eight-channel multiplexing (vs MAX310EWN)
設計ノート
Use the specified 150 ohm on-resistance as the starting point for the signal-path impedance budget, but do not treat it as a complete loss model. Bandwidth, channel capacitance, insertion loss, and off-isolation are not established on this page and must be taken from the manufacturer data sheet. Keep RF and video routes short, avoid unnecessary stubs, and provide a continuous reference plane beneath the routed channels.
Place local bypass capacitors close to the positive and negative supply pins, and route both supply returns directly to the device ground reference. Keep switching-control traces away from sensitive video or RF paths to reduce coupling into the selected channel. The 18-pin SOIC outline supports conventional surface-mount assembly, but the final footprint should be checked against the manufacturer package drawing rather than inferred from the generic outline name.
Do not infer pin functions from another MAX-series device. MAX312ESE and MAX311CWN+ are related products but do not share a drop-in footprint, and the MAX311EWN+ comparison should still be checked against the required control truth table. Also avoid designing around a family-level starting price or approximate distributor listing; request the exact MAX311CWN+ order code and current commercial terms through the quote form.
コンプライアンス情報
The Analog Devices product page identifies MAX311 as a production device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established and remain unknown.