Analog Devices

MAX314CUE+ - Quad 10Ω SPST CMOS Switch | Analog Devices

MPN: MAX314CUE+ ✓ פעיל
4.5V to 30V Vdss 2.5nA at +85°C Id 10Ω maximum Rds(on) 16-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

MAX314CUE+ סקירה

The Analog Devices MAX314CUE+ is a quad, normally open SPST CMOS analog switch with a maximum on-resistance of 10Ω, 1.5Ω on-resistance matching between channels, and bidirectional signal conduction. The device operates from 4.5V to 30V and is packaged in a 16-pin TSSOP. Its four independent switches support low-power consumption, low leakage, and bidirectional analog routing.

A CMOS analog switch is a semiconductor-controlled routing device that connects or isolates circuit nodes under digital control. The MAX314 family belongs to the analog-switch hierarchy, which includes multiplexers, selectors, and SPST switch arrays. Unlike a mechanical relay, an analog switch changes state electronically with no moving parts, making it suitable for compact instrumentation, signal-routing, and test systems.

The MAX314 provides four single-pole, single-throw channels, a maximum on-resistance of 10Ω, and channel-to-channel matching of 1.5Ω. Because the switches conduct equally well in either direction, one package can route positive, negative, or bipolar signals. Leakage is specified at 2.5nA at +85°C, helping preserve signal integrity when a switch is off and high-impedance loads are connected.

The four channels operate independently, allowing simultaneous control of separate signal paths. Matching of 1.5Ω minimizes gain or attenuation differences caused by unequal switch resistance, while the 10Ω maximum on-resistance supports common low-level analog signals. The CMOS implementation also provides low power consumption, although supply current and switching timing should be checked against the operating conditions in the manufacturer datasheet.

Typical uses include signal isolation between instrumentation channels, routing between a sensor and a measurement circuit, and selecting inputs in test and measurement equipment. The device can also serve in industrial control systems where an external controller must connect a source to an analog processing chain without changing the baseband voltage.

For PCB design, keep control traces away from sensitive analog routes and provide a stable ground reference to all package pins. Confirm the absolute maximum voltage, input logic levels, charge injection, off leakage, and switching-time limits before applying the device to high-voltage or high-speed signals.

This page combines the MAX314 family electrical characteristics, pin-compatible alternatives, application guidance, comparison parameters, and practical PCB considerations in a format designed for rapid component selection and design review.

חלופות תחליף ישיר עבור MAX314CUE+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX314CUE+ (אותו גורם צורה וטביעת רגל) — שונים ב Dual-Supply Operating Range, On-Resistance, On-Resistance Matching Between Channels, Switch Configuration.

Analog Devices
Dual-Supply Operating Range: -4.5 V to -20 V and +4.5 V to +20 V
On-Resistance: 10 ohms maximum
On-Resistance Matching Between Channels: 1.5 ohms maximum
השווה עם MAX314CUE+ →

MAX314EUE+

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 16-pin TSSOP
Same MAX314 family, 10Ω maximum on-resistance, and four SPST channels; suffix-specific temperature and ordering ratings require confirmation

📋 חלופה להתייחסות (לא בקטלוג)

MAX313CUE+

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 16-pin TSSOP
4 channels · 4 x SPST normally open · 10 ohms maximum · 6.5 ohms · 1.5 ohms maximum · 2 ohms maximum over specified signal range · 4.5 V to 30 V · -4.5 V to -20 V and +4.5 V to +20 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX313EUE+

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 16-pin TSSOP
Same 16-pin TSSOP quad-SPST format; MAX313 and MAX314 on-resistance, leakage, and supply limits differ by up to 20%

📋 חלופה להתייחסות (לא בקטלוג)

MAX312CUE+

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 16-pin TSSOP
Same quad-SPST TSSOP architecture; MAX312-family electrical ratings differ from the MAX314 by approximately 30%

📋 חלופה להתייחסות (לא בקטלוג)

MAX313LEUE+T

✅ Drop-In
📦 16-pin TSSOP
Same 16-pin TSSOP quad-SPST package; MAX313-family on-resistance and control characteristics differ from MAX314 by up to 20%

📋 חלופה להתייחסות (לא בקטלוג)

MAX314CUE+ דירוגים מרביים ומאפיינים חשמליים

Number of Channels 4 channels
Switch Configuration 1:1 SPST
Signal Conductivity Bidirectional
On-Resistance 10Ω maximum
On-Resistance Matching Between Channels 1.5Ω
Supply Voltage Range 4.5V to 30V
Dual-Supply Operating Range ±4.5V to ±20V
Off Leakage Current 2.5nA at +85°C
Technology CMOS
מספר פינים 16 pins
מארז 16-pin TSSOP
סוג הרכבה Surface mount
ESD Tolerance Greater than 2000V per method 3015.7
Power Consumption Low power consumption
סטטוס RoHS Compliant
REACH Status Compliant

מדריך תצורת פינים של MAX314CUE+ 16-pin tssop

תצורת פינים עבור MAX314CUE+ (מארזת 16-pin tssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin tssop עבור MAX314CUE+

אין נתוני פריסת פינים מפורטים עבור MAX314CUE+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX314CUE+ מתאים עבור 6 יישוםs: Sensor Signal Routing, Test and Measurement Equipment, Industrial Control Signal Isolation, Battery-Powered Instrumentation, Data Acquisition Multiplexing, Analog Signal Fan-Out.

🧩

Sensor Signal Routing

The MAX314CUE+ is suitable for routing a sensor output to a measurement amplifier while limiting the number of interconnects in the analog path. Each of its four SPST channels can connect or isolate a signal bidirectionally, and the 10Ω maximum on-resistance is manageable when the selected amplifier input presents a substantially higher impedance. The 2.5nA leakage rating at +85°C also limits loading of high-impedance sensor nodes. Designers should calculate the source impedance, injected offset, and settling behavior before using the switch at the input of precision conversion circuitry.

🔧

Test and Measurement Equipment

The MAX314CUE+ can route instrument signals between a source, an input terminal, and a test fixture without using moving relays. Four independent SPST channels provide flexibility for signal isolation, while the 1.5Ω channel-to-channel matching helps maintain similar insertion loss among measured paths. The low 2.5nA leakage at +85°C is valuable when the fixture includes high-impedance probes. Because the device is intended for 4.5V-to-30V operation, the fixture must keep every switched node within the absolute maximum voltage range specified by the manufacturer.

🏭

Industrial Control Signal Isolation

The MAX314CUE+ can isolate individual analog control or monitoring signals in an industrial control assembly. Bidirectional SPST operation allows the same routing arrangement whether the switch is used to connect a controller output to an actuator interface or a sensor signal back to a controller input. Its low power consumption is useful in distributed systems, while the 16-pin TSSOP package supports compact board layouts. Firmware and hardware designers should confirm logic thresholds, switch timing, transient limits, and isolation behavior under the applicable industrial operating conditions.

🔋

Battery-Powered Instrumentation

The MAX314CUE+ fits compact, low-power instrumentation because it combines four analog channels with low power consumption and an electrical rating of 4.5V to 30V. Operating from a single 5V rail simplifies portable equipment, while its bidirectional switches can support both input selection and output routing. The principal design trade-off is the 10Ω maximum on-resistance, which can create a divider with a low-impedance downstream input. Use a high-impedance receiving stage or buffer when insertion resistance would otherwise degrade signal accuracy.

📊

Data Acquisition Multiplexing

The MAX314CUE+ can perform front-end channel selection in a small data-acquisition system using four independently controlled SPST paths. Its 1.5Ω on-resistance matching reduces channel-dependent variation, and low leakage helps prevent unloaded inputs from shifting when the switch is open. The device should be placed close to the multiplexed source to minimize parasitic capacitance and pickup. For high-speed acquisition, evaluate charge injection, switching time, input capacitance, and settling time from the MAX314 datasheet before selecting the sampling interval.

🌐

Analog Signal Fan-Out

The MAX314CUE+ can distribute a low-level analog signal through separate switched paths when the receiving circuits present sufficiently high impedance. Because the channels are electrically independent, each path can be enabled at a different time without mechanically disturbing the source. On-resistance matching of 1.5Ω supports similar signal attenuation across channels. The design must account for simultaneous switching transients, control-signal settling, and the cumulative effect of leakage into nearby high-impedance nodes, particularly at elevated temperatures.

סיכום מוצרים מומלצים

MAX314EUE+ Same-family quad analog switch for alternate ordering code בשימוש ב-: Sensor Signal Routing, Test and Measurement Equipment, Battery-Powered Instrumentation, Analog Signal Fan-Out MAX313CUE+ Analog Devices בשימוש ב-: Sensor Signal Routing, Battery-Powered Instrumentation MAX313LEUE+T Related quad SPST switching option בשימוש ב-: Test and Measurement Equipment, Analog Signal Fan-Out MAX312CUE+ Related quad SPST signal-isolation switch בשימוש ב-: Industrial Control Signal Isolation, Data Acquisition Multiplexing MAX313EUE+ Related same-package routing option בשימוש ב-: Industrial Control Signal Isolation, Data Acquisition Multiplexing
What is the MAX314CUE+ and what does it do?
The MAX314CUE+ is a quad SPST CMOS analog switch that independently connects or isolates four analog signal paths. Each switch conducts bidirectionally and has a maximum on-resistance of 10Ω. According to the Analog Devices MAX314 datasheet, the device supports 4.5V to 30V single-supply operation or dual-supply operation from ±4.5V to ±20V. It is packaged in a 16-pin TSSOP and is intended for compact signal-routing and isolation systems.
What are the key specifications of MAX314CUE+ that engineers should know?
The key MAX314CUE+ specifications are four independent SPST channels, 10Ω maximum on-resistance, 1.5Ω on-resistance matching between channels, and bidirectional operation. The Analog Devices MAX314 datasheet also identifies 2.5nA leakage at +85°C and an operating range of 4.5V to 30V. The 16-pin TSSOP package makes the device suitable for compact analog and test equipment, while low power consumption supports battery-powered or distributed instrumentation.
Where can I download the MAX314CUE+ datasheet PDF?
The authoritative MAX314 documentation is available on the Analog Devices MAX314 product page, which links to the MAX314 data sheet, Rev. 2. Use that manufacturer document to verify the pinout, absolute maximum ratings, logic thresholds, switching characteristics, and recommended operating conditions. The product page is https://www.analog.com/en/products/MAX314.html. It also provides part variants, sample ordering information, and related technical resources for the MAX312, MAX313, and MAX314 families.
Where can I find the MAX314CUE+ pinout?
The MAX314CUE+ pinout is found in the pin-description table and package drawing in the Analog Devices MAX314 datasheet, Rev. 2. The component uses a 16-pin TSSOP package with four SPST switch channels and their control inputs. Before assigning PCB nets, verify every signal, common, and control pin against the ordering-information table because package variants in the MAX312, MAX313, and MAX314 families can differ in control logic and electrical details.
What is the on-resistance and leakage of MAX314CUE+?
The MAX314CUE+ has a maximum on-resistance of 10Ω and a channel-to-channel on-resistance matching specification of 1.5Ω. According to the Analog Devices MAX314 datasheet, Rev. 2, its off-state leakage is 2.5nA at +85°C. The low matching figure helps minimize variation between routed channels, while the low leakage helps preserve the amplitude of signals connected to high-impedance analog nodes.
Can MAX314CUE+ switch signals in both directions?
Yes, the MAX314CUE+ switches conduct equally well in either direction. Its four SPST channels therefore work with positive, negative, or bipolar signals within the permitted supply and absolute-maximum limits. The Analog Devices MAX314 datasheet identifies the device as a CMOS analog switch with 4.5V to 30V operating capability. Bidirectional operation allows one package to route a source into either an input or output amplifier without changing the switch topology.
Where to buy MAX314CUE+ online and what is its price?
The MAX314CUE+ can be requested through the Request a Quote form on this XAIPART product page, where the exact suffix, quantity, and current commercial terms can be confirmed. The page does not present a static price because commercial terms may change with quantity and supply conditions. Submit the required quantity and target date with the request to obtain current pricing, availability, and lead-time information for the 16-pin TSSOP device.
What is the lead time for MAX314CUE+?
The current lead time for MAX314CUE+ should be confirmed through the Request a Quote form on this XAIPART page. Lead time can vary with order quantity, component availability, and the exact MAX314 package suffix. Include your required quantity, production schedule, and approved vendor list in the request. Analog Devices lists the MAX314 family in production, making it appropriate to request a supply quotation directly for the MAX314CUE+ ordering code.
Is MAX314CUE+ currently in stock?
Current MAX314CUE+ stock should be requested through the Request a Quote form on this XAIPART page because availability is quote-dependent and can change by quantity. The Analog Devices MAX314 product page identifies the family as production and provides the supported order variants. Include the required quantity and target delivery date so the current supply position can be confirmed for the exact MAX314CUE+ suffix.
MAX314CUE+ vs MAX314EUE+ - which is better for a new design?
MAX314CUE+ and MAX314EUE+ belong to the same MAX314 family and use the same 16-pin TSSOP format, but their suffix-specific ordering and operating details must be checked in the product-selection table. The MAX314CUE+ is identified as a 4.5V-to-30V quad SPST CMOS switch with 10Ω maximum on-resistance. Use MAX314EUE+ only after confirming its exact supply range, temperature grade, control logic, and lifecycle terms against the manufacturer datasheet.
What is the difference between MAX314CUE+ and MAX313LEUE+T?
MAX314CUE+ and MAX313LEUE+T are related Maxim quad analog-switch families, but they are not automatically interchangeable for every application. According to the comparison information for these parts, MAX313LEUE+T and MAX314CUE+T differ in family-specific electrical and ordering characteristics. Both use a 16-pin TSSOP presentation, but engineers should verify switch logic, supply range, temperature grade, leakage, and absolute maximum ratings before substituting one for the other.
When should I choose MAX314CUE+ over another quad analog switch?
Choose MAX314CUE+ when the design needs four independent, bidirectional SPST channels, a maximum on-resistance of 10Ω, and operation across a 4.5V-to-30V supply range in a 16-pin TSSOP. Its 1.5Ω channel matching is useful when similar attenuation across multiple paths is important. Select another family member only when a different control function, temperature grade, electrical rating, or package variant provides a documented advantage for the target circuit.
Is MAX314CUE+ suitable for sensor signal routing?
Yes, MAX314CUE+ is suitable for low-level sensor signal routing when the selected channel impedance and leakage are acceptable. Its 10Ω maximum on-resistance adds series path resistance, while 2.5nA leakage at +85°C limits the current drawn through a high-impedance sensor node. According to the Analog Devices MAX314 datasheet, Rev. 2, the switches are bidirectional, so the same routing arrangement can support source selection or signal isolation.
What can replace MAX314CUE+ on the same PCB?
The closest documented drop-in candidates are the MAX312, MAX313, and MAX314 family variants that use the same 16-pin TSSOP configuration. MAX314EUE+, MAX313LEUE+T, MAX312CUE+, MAX313CUE+, and MAX313EUE+ provide package-compatible options for review. No independent cross-brand part was established as pin-compatible from the available cross-reference information, so verify control logic, supply range, on-resistance, leakage, temperature grade, and absolute maximum ratings before substitution.
Is MAX314EUE+ the same as MAX314CUE+?
MAX314EUE+ and MAX314CUE+ are MAX314-family order variants rather than automatically identical parts. Both are presented in 16-pin TSSOP packaging and share the family architecture of four bidirectional SPST switches, but suffix codes can identify different temperature grades, electrical grades, or regional ordering options. According to the Analog Devices MAX314 product-selection table, compare the exact suffix ratings and operating conditions before treating either part as a drop-in replacement.
What is the best Analog Devices equivalent for MAX314CUE+?
Analog Devices MAX314-family variants provide the most direct equivalent family because they share the four-channel CMOS SPST architecture and 16-pin TSSOP format. MAX314EUE+ is the closest same-family candidate, while MAX312CUE+, MAX313CUE+, MAX313EUE+, and MAX313LEUE+T may offer compatible package alternatives. Their control functions and ratings differ, so the replacement is valid only after checking the manufacturer pin descriptions, logic levels, supply range, temperature range, and absolute maximum ratings.

נתוני עזר הנדסיים עבור MAX314CUE+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX314CUE+ for a compact four-channel analog-routing design that requires bidirectional SPST operation, 10Ω maximum on-resistance, and operation from 4.5V to 30V. Its 1.5Ω channel matching is valuable when multiple paths should exhibit similar attenuation. Select MAX314EUE+ when that exact suffix offers the required temperature grade or ordering configuration. Consider MAX313CUE+, MAX313EUE+, or MAX313LEUE+T when their MAX313-specific control and electrical characteristics better match the system, but verify every pin and rating before substitution. MAX312CUE+ is a lower-closeness package-compatible option and should be used only after checking its supply range, switching behavior, leakage, and logic levels. No cross-brand replacement is established here because the available cross-reference search did not verify a pin-compatible part in the 16-pin TSSOP package.

השוואה עם חלופות

פרמטר מוצר זה MAX314EUE+ MAX313CUE+ MAX313EUE+ MAX312CUE+ MAX313LEUE+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Number of Channels 4 4 4 4 4 4
Switch Configuration SPST SPST SPST SPST SPST SPST
Technology CMOS CMOS CMOS CMOS CMOS CMOS

מבדילים עיקריים

  • Four independently controlled analog channels in one package (לעומתMAX313LEUE+T)
  • Low maximum on-resistance for the MAX314 family (לעומתMAX313LEUE+T)
  • Improved channel-to-channel resistance matching (לעומתMAX312CUE+)
  • Bidirectional conduction in a compact TSSOP package (לעומתMAX313CUE+)

הערות תכנון

Treat the 10Ω maximum on-resistance as part of the signal path, not as an isolated component rating. When the switch drives a lower-impedance load, calculate the voltage-divider ratio formed by the switch resistance and the load. Use a receiving stage with substantially higher input impedance when insertion resistance would affect gain. The 1.5Ω channel matching helps limit path-to-path variation, but amplifier offset, capacitor charging, and leakage must also be included in the error budget.

Place the MAX314CUE+ close to the connector, sensor, or amplifier input that it routes. Keep switched-node traces short to reduce parasitic capacitance and susceptibility to induced noise, while separating the digital control traces from high-impedance analog nets. Provide a low-impedance ground plane and connect the package ground reference according to the manufacturer pin description. Review exposed or adjacent supply pins for adequate decoupling where the selected board architecture requires it.

Do not infer that every MAX312, MAX313, or MAX314 suffix is interchangeable. Verify the control polarity, input logic thresholds, supply range, temperature grade, absolute maximum voltages, on-resistance, leakage, and timing for the exact alternate part. Bidirectional operation does not permit signals outside the device ratings, and the 2.5nA leakage figure applies at the stated temperature and measurement conditions. Check the product-selection table before approving a substitution.

מידע על תאימות

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS and REACH compliance are identified for MAX314CUE+ through component comparison information. AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status are not established for this part.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX314CUE+ datasheet MAX314CUE+ pinout MAX314CUE+ datasheet pdf MAX314CUE+ equivalent MAX314CUE+ replacement MAX314CUE+ cross reference MAX314CUE+ vs MAX314EUE+ MAX314CUE+ price MAX314CUE+ stock Analog Devices MAX314CUE+ MAX314CUE+ application circuit MAX314 10Ω quad SPST switch

רכיבים ומונחים קשורים

Analog Devices MAX314CUE+ MAX314EUE+ MAX313CUE+ MAX313EUE+ MAX312CUE+ MAX313LEUE+T CMOS analog switch SPST switch quad analog switch analog switch IC signal routing interface IC semiconductor on-resistance on-resistance matching off leakage current bidirectional conduction 16-pin TSSOP TSSOP package family surface-mount package signal isolation test and measurement sensor signal routing ESD tolerance
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר