Texas Instruments

MAX3232CPWRE4 - 3-5.5V RS-232 Transceiver | Texas Instruments

MPN: MAX3232CPWRE4 ✓ פעיל
3 V to 5.5 V Vdss 1 mA Id 16-pin TSSOP Package
כמות הזמנה מינימלית: 1 |

MAX3232CPWRE4 סקירה

The Texas Instruments MAX3232CPWRE4 is a dual-channel RS-232 line driver and receiver designed for 3 V to 5.5 V supply operation, with a 250 kbps data rate and ±15 kV ESD protection. The device is supplied in a 16-pin TSSOP package and supports both transmit and receive functions for industrial, embedded, and data-communication equipment.

An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the voltage levels used by RS-232 ports. The MAX3232 family integrates two drivers and two receivers, allowing a UART or other communications controller to connect to an RS-232 connector. The 3 V to 5.5 V operating range makes the device suitable for systems using either 3.3 V or 5 V logic supplies.

The MAX3232CPWRE4 provides a 250 kbps RS-232 line rate and ±15 kV ESD protection according to the manufacturer product page. These characteristics are important in equipment where a communications port may be exposed to electrostatic discharge from cables, connectors, or nearby personnel. The device is identified in distributor listings as a 2/2 full RS-232 transceiver in a 16-pin TSSOP package.

The MAX3232 family is intended for applications requiring bidirectional serial communication, including point-of-sale terminals, industrial control panels, test equipment, instrumentation, and embedded serial-port interfaces. Its dual-channel arrangement allows two transmit and two receive functions on one device, reducing the number of interface ICs required on a board.

The commercial MAX3232CPWRE4 ordering code uses the 16-terminal TSSOP format and is associated with the commercial temperature grade. The E suffix in the ordering code identifies the tube packaging format for the package code, while the R suffix identifies the standard commercial temperature range. Confirm the exact ordering information, package dimensions, electrical limits, and operating temperature limits against the current manufacturer datasheet and product page before releasing a production BOM.

For robust implementation, place the charge-pump capacitors and receiver or driver interface components close to the device and keep RS-232 traces away from sensitive analog and clock paths. The external charge-pump capacitors are part of the MAX3232 operating circuit, and their values and placement should follow the manufacturer datasheet layout guidance. This page combines manufacturer specifications, distributor identification, drop-in cross-references, and application-specific design guidance for engineers evaluating the MAX3232CPWRE4.

חלופות תחליף ישיר עבור MAX3232CPWRE4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX3232CPWRE4 (אותו גורם צורה וטביעת רגל) — שונים ב Package, RoHS Status, ESD Protection, Interface Standard, Product Type.

Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
RoHS Status: Compliant
השווה עם MAX3232CPWRE4 →
MaxLinear
RoHS Status: Compliant
ESD Protection: 15 kV
Interface Standard: Full RS-232

MAX3232IPWR

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232EIPWG4

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232CPWE4

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
2/2 RS-232 line transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbit/s · RS-232 · ±15 kV using the human-body model · 16-TSSOP, 0.173 in / 4.40 mm width

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

SP3232EBCY-L/TR

✅ Drop-In
MaxLinear
📦 16-pin TSSOP
2/2 RS-232 transceiver · 2 transmitter and 2 receiver channels · Full RS-232 · 250 kbps · 3 V to 5.5 V · 0°C to +70°C · 0.1 µF in 3.3 V operation · 15 kV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232CPWRE4 מפרטים

Product Type Dual RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
RS-232 Data Rate 250 kbps
ESD Protection ±15 kV
Channel Count 2 drivers and 2 receivers
מארז 16-pin TSSOP
Terminal Count 16
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Commercial
Maximum Supply Voltage 3.6 V
Transmit Delay 300 ns
זרם אספקה 1 mA
Interface Standard RS-232
סוג הרכבה Surface mount
סטטוס RoHS RoHS

מדריך תצורת פינים של MAX3232CPWRE4 rectangular

תצורת פינים עבור MAX3232CPWRE4 (מארזת rectangular). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת rectangular עבור MAX3232CPWRE4

אין נתוני פריסת פינים מפורטים עבור MAX3232CPWRE4.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX3232CPWRE4 מתאים עבור 6 יישוםs: Industrial Serial Control Panels, Point-of-Sale Terminals, Embedded UART-to-RS-232 Bridges, Test and Measurement Instruments, Instrumentation and Data Acquisition, Network and Communication Equipment.

🏭

Industrial Serial Control Panels

The MAX3232CPWRE4 fits industrial control-panel designs that need to connect a 3.3 V or 5 V controller to an RS-232 service port. Its two-driver, two-receiver arrangement supports bidirectional serial communication without requiring separate transceiver ICs. The 250 kbps data rate is suitable for configuration transfer, diagnostics, and supervisory commands, while ±15 kV ESD protection helps the external cable interface withstand electrostatic discharge. Designers should preserve the manufacturer-specified charge-pump capacitor layout and use the device within its documented 3 V to 5.5 V supply range.

🖥️

Point-of-Sale Terminals

Point-of-sale equipment often uses an RS-232 port for peripherals such as scales, printers, or customer displays. The MAX3232CPWRE4 provides two transmit and two receive channels in a compact 16-pin TSSOP package, helping conserve board area in compact terminal electronics. Its 3 V to 5.5 V operating range allows interface to common logic rails, and the 250 kbps rate is more than adequate for typical transaction and control traffic. Use a protected connector path and follow the datasheet ground and charge-pump capacitor recommendations.

🔧

Embedded UART-to-RS-232 Bridges

The MAX3232CPWRE4 is appropriate for embedded boards that expose an RS-232 port alongside a modern UART controller. It translates logic-level UART signals to RS-232 line levels and returns received data to the controller. The dual-channel implementation allows two independent communications paths, while the 3 V to 5.5 V range supports both 3.3 V and 5 V embedded designs. The 250 kbps maximum rate is suitable for many legacy peripheral protocols. For reliable operation, keep capacitor loops compact and route cable-side signals away from sensitive circuitry.

🔧

Test and Measurement Instruments

Laboratory and field-test instruments frequently require an RS-232 connection for legacy equipment control or data capture. The MAX3232CPWRE4 combines two RS-232 drivers and two receivers with a 250 kbps data rate in one 16-pin TSSOP device, simplifying the interface section of a multi-function instrument. ±15 kV ESD protection is valuable when the port connects to an external cable. The design must still account for the instrument's ground architecture, connector selection, and any isolation requirement; the MAX3232 itself does not provide galvanic isolation.

📺

Instrumentation and Data Acquisition

Data-acquisition equipment can use the MAX3232CPWRE4 to connect a controller or host to RS-232-compatible instruments. Its dual-channel architecture reduces the number of interface components compared with separate driver and receiver devices, while its 250 kbps rate supports many configuration and status-reporting links. Because instrumentation systems can have long cables and multiple grounded endpoints, use a suitable connector and cable arrangement and evaluate grounding carefully. The commercial temperature-grade designation should be reviewed against the intended environmental range.

🌐

Network and Communication Equipment

The MAX3232CPWRE4 can provide a legacy RS-232 service or configuration port on communication equipment that otherwise uses modern digital interfaces. Two transmit and two receive channels allow a single IC to support more than one serial function, depending on the board's channel allocation. The 3 V to 5.5 V supply range is compatible with common embedded logic levels, and the 250 kbps rate supports administrative traffic rather than high-throughput protocols. Place the IC and its charge-pump capacitors away from switching supplies and high-speed clock traces.

What is the MAX3232CPWRE4?
The MAX3232CPWRE4 is a Texas Instruments dual RS-232 line driver and receiver operating from 3 V to 5.5 V. According to the TI MAX3232 product page, it supports a 250 kbps RS-232 data rate and provides ±15 kV ESD protection. The device is packaged in a 16-pin TSSOP and is intended for systems requiring two transmit and two receive RS-232 functions.
What is the operating voltage of MAX3232CPWRE4?
The MAX3232CPWRE4 operates from 3 V to 5.5 V, as stated on the Texas Instruments MAX3232 product page. This range supports both 3.3 V and 5 V system rails. A distributor listing also identifies a maximum supply voltage of 3.6 V for the MAX3232CPWRE4, so the complete electrical limits should be confirmed in the manufacturer datasheet before final design sign-off.
What is the MAX3232CPWRE4 data rate?
The MAX3232CPWRE4 supports an RS-232 data rate of 250 kbps according to the TI MAX3232 product page. The same product information identifies the device as a 2/2 full RS-232 transceiver. Actual UART throughput depends on the host baud rate, framing, parity, flow control, cable characteristics, and signal-integrity conditions.
Does MAX3232CPWRE4 include ESD protection?
Yes. The Texas Instruments product page identifies ±15 kV ESD protection for the MAX3232 family, including the MAX3232CPWRE4 ordering code. This rating is useful for RS-232 ports connected to external cables, but board layout, connector placement, grounding, and system-level protection still determine the final ESD immunity of the complete equipment.
What package does MAX3232CPWRE4 use?
The MAX3232CPWRE4 uses a 16-pin TSSOP package with gull-wing leads and a rectangular package shape. The manufacturer datasheet is the authoritative source for dimensions, lead pitch, pin numbering, and recommended land pattern. The distributor description identifies the same 16-terminal TSSOP construction used by the MAX3232CPWRE4.
Where can I download the MAX3232CPWRE4 datasheet?
The MAX3232CPWRE4 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/max3232.pdf. The TI MAX3232 product page at https://www.ti.com/product/MAX3232 provides ordering information, parameter links, and additional product support. Use the datasheet for pin assignments, absolute maximum ratings, recommended operating conditions, charge-pump capacitor values, and layout guidance.
Where can I find the MAX3232CPWRE4 pinout?
The MAX3232CPWRE4 pinout is shown in the Texas Instruments MAX3232 datasheet, whose PDF link is https://www.ti.com/lit/ds/symlink/max3232.pdf. The exact MAX3232CPWRE4 pin names and numbered assignments should be transcribed from the manufacturer pin-description table because the verified listing confirms a 16-terminal TSSOP but does not reproduce every pin name.
Is MAX3232CPWRE4 suitable for industrial RS-232 equipment?
The MAX3232CPWRE4 is suitable for many industrial serial-interface designs because it provides 3 V to 5.5 V operation, 250 kbps RS-232 performance, and ±15 kV ESD protection. The commercial temperature designation means the exact temperature-range limits must be checked in the manufacturer datasheet. Industrial suitability also depends on enclosure design, grounding, isolation, and cable protection.
How do I design the power and ground connections for MAX3232CPWRE4?
Connect the MAX3232CPWRE4 supply to the system logic rail within its 3 V to 5.5 V operating range, and follow the manufacturer datasheet for bypass and charge-pump capacitor requirements. Keep the power loop compact, connect the device ground to the circuit ground plane, and route RS-232 traces away from high-speed digital and sensitive analog nodes.
What is the best drop-in replacement for MAX3232CPWRE4?
The MAX3232IPWR is identified as a pin-compatible MAX3232CPWRE4 alternative with consistent terminals, package, and principal performance characteristics. MAX3232E-family devices are also described by Texas Instruments as improved direct drop-in replacements for MAX3232 designs. Confirm the exact suffix, temperature grade, supply limits, and pin assignment before substitution.
Can MAX3232IPWR replace MAX3232CPWRE4?
Yes, MAX3232IPWR is a pin-compatible replacement candidate for MAX3232CPWRE4 according to the component comparison information for the MAX3232 family. Both devices use the 16-terminal TSSOP format, but designers should verify the operating-temperature grade, ordering suffix, and electrical limits against the manufacturer datasheet before approving the substitution.
What is the best MaxLinear equivalent for MAX3232CPWRE4?
SP3232EBCY-L/TR is listed as a functional-equivalent, pin-compatible option for the Texas Instruments MAX3232CPWR family in the MaxLinear cross-reference information. Because the verified data does not reproduce the full electrical comparison, validate supply voltage, ESD rating, driver and receiver count, package dimensions, and capacitor requirements against both manufacturers' datasheets before using it as a drop-in replacement.
MAX3232CPWRE4 versus MAX3232IPWR — which is better?
MAX3232IPWR is the closer documented replacement candidate because it is identified as having consistent terminals, packages, and functional performance characteristics. The MAX3232CPWRE4 and MAX3232IPWR both use the MAX3232 16-terminal TSSOP family format. Selection should still account for temperature grade, lifecycle requirements, and approved-vendor constraints.
When should I choose MAX3232CPWRE4 over an alternative?
Choose MAX3232CPWRE4 when the design requires the documented Texas Instruments MAX3232 3 V to 5.5 V RS-232 interface, 250 kbps operation, ±15 kV ESD protection, and a 16-pin TSSOP footprint. An alternative is preferable when it offers a needed qualification, improved feature set, better lifecycle position, or approved sourcing advantage. The footprint alone does not prove every electrical condition matches.
Where can I buy MAX3232CPWRE4 online?
Use the Request a Quote form on this page to request MAX3232CPWRE4 pricing, stock confirmation, and lead time from XAIPART. Current commercial terms should be requested at the time of inquiry because pricing and availability can change. The manufacturer product and datasheet links on this page support technical review before purchase.
What is the price of MAX3232CPWRE4?
Submit a MAX3232CPWRE4 request through the Request a Quote form on this page for current pricing, quantity breaks, stock, and lead time. The verified listings identify the part and its market channels but do not provide a qualifying quantity-break price table for the exact MPN, so no static price is stated here.
What is the lead time for MAX3232CPWRE4?
Request the current MAX3232CPWRE4 lead time, minimum order quantity, and stock status through the Request a Quote form on this page. The verified distributor snippets confirm distribution channels for the exact ordering code, but they do not state a fixed lead time or current inventory quantity.
Is MAX3232CPWRE4 in stock?
Current MAX3232CPWRE4 stock status should be confirmed through the Request a Quote form on this page. A distributor listing showing the part does not by itself establish present inventory or a guaranteed allocation. The form can return the latest quantity, packaging, and delivery information for the exact 16-pin TSSOP ordering code.
What are the key specifications engineers should know about MAX3232CPWRE4?
The key MAX3232CPWRE4 specifications are a 3 V to 5.5 V supply range, two RS-232 drivers, two receivers, a 250 kbps data rate, ±15 kV ESD protection, and a 16-pin TSSOP package. According to the Texas Instruments product page, the device combines these functions in one interface IC. The manufacturer datasheet should be used for complete pinout, limits, timing, and recommended external-component details.

נתוני עזר הנדסיים עבור MAX3232CPWRE4 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX3232CPWRE4 for a commercial-temperature RS-232 interface requiring two drivers, two receivers, 3 V to 5.5 V operation, 250 kbps data rate, and ±15 kV ESD protection in a 16-pin TSSOP footprint. MAX3232IPWR is a strong pin-compatible option when an industrial-temperature-grade alternative is desirable. MAX3232E is the appropriate family choice when TI identifies its improved MAX3232 functionality as beneficial for a new design. MAX3232CPWE4 provides the closest same-family ordering comparison with consistent terminals and package characteristics. SP3232EBCY-L/TR can provide a cross-manufacturer sourcing option because it is listed as functionally equivalent and pin compatible. Before final substitution, verify the exact pinout, supply limits, ESD rating, data rate, temperature range, external capacitor requirements, and lifecycle status in both manufacturers' datasheets.

השוואה עם חלופות

פרמטר מוצר זה MAX3232IPWR MAX3232E MAX3232CPWE4 SP3232EBCY-L/TR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments MaxLinear
Function 2/2 RS-232 transceiver 2/2 RS-232 transceiver Improved MAX3232 direct replacement 2/2 RS-232 transceiver Functional equivalent RS-232 transceiver
Pin Compatibility Reference device Consistent terminals and package Direct drop-in replacement Consistent terminals and package Pin compatible

מבדילים עיקריים

  • Documented direct replacement path within the MAX3232 family (לעומתMAX3232IPWR)
  • Improved family option for new designs (לעומתMAX3232E)
  • Cross-manufacturer sourcing option (לעומתSP3232EBCY-L/TR)
  • RS-232 performance and protection in a compact package (לעומתMAX3232CPWE4)

הערות תכנון

Place the MAX3232 charge-pump capacitors and required bypass capacitors close to their associated device pins, following the manufacturer datasheet schematic and layout example. Keep the high-current capacitor loops compact to reduce radiated and conducted noise. Route the RS-232 driver outputs directly toward the connector while keeping receive inputs away from switching nodes and noisy digital signals.

Do not treat the MAX3232 as an isolated RS-232 interface. The device provides logic-to-RS-232 level translation and ESD protection, but it does not provide galvanic isolation. If the connected equipment uses a different ground potential, use an appropriately rated isolation method and verify that the external cable and connector arrangement does not create an unsafe ground path.

Separate the cable-side RS-232 nets from sensitive analog, oscillator, and high-speed digital traces. Maintain a continuous ground reference and place interface protection at the connector boundary when additional surge or ESD protection is required. Confirm the final connector pinout and shield connection to avoid introducing ground loops into the completed equipment.

The verified MAX3232 family rating is 250 kbps, so the UART baud rate must be selected with normal start and stop-bit overhead in mind. Use the manufacturer timing limits to evaluate the complete data path, and avoid assuming that a nominal 250 kbps UART setting provides a full 250,000-byte-per-second application payload. For longer cables, consider signal-conditioning or isolation requirements.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified component listing identifies the MAX3232CPWRE4 as RoHS. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was found for the exact ordering code.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

max3232cpwr datasheet MAX3232CPWRE4 datasheet MAX3232CPWRE4 pinout MAX3232CPWRE4 datasheet pdf MAX3232CPWRE4 equivalent MAX3232CPWRE4 replacement MAX3232CPWRE4 vs MAX3232IPWR MAX3232CPWRE4 cross reference MAX3232CPWRE4 footprint MAX3232CPWRE4 price MAX3232CPWRE4 stock Texas Instruments MAX3232CPWRE4 MAX3232 3V RS-232 transceiver MAX3232 industrial serial interface

רכיבים ומונחים קשורים

Texas Instruments MAX3232CPWRE4 MAX3232IPWR MAX3232E MAX3232CPWE4 SP3232EBCY-L/TR MaxLinear RS-232 line driver line receiver transceiver UART 3.3 V logic 5 V logic 250 kbps 15 kV ESD protection charge-pump capacitor 16-pin TSSOP TSSOP family surface mount interface IC semiconductor RoHS commercial temperature grade
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר