MAX3232CPWRE4 - 3-5.5V RS-232 Transceiver | Texas Instruments
MPN: MAX3232CPWRE4 ✓ Hoạt độngMAX3232CPWRE4 Tóm tắt
An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the voltage levels used by RS-232 ports. The MAX3232 family integrates two drivers and two receivers, allowing a UART or other communications controller to connect to an RS-232 connector. The 3 V to 5.5 V operating range makes the device suitable for systems using either 3.3 V or 5 V logic supplies.
The MAX3232CPWRE4 provides a 250 kbps RS-232 line rate and ±15 kV ESD protection according to the manufacturer product page. These characteristics are important in equipment where a communications port may be exposed to electrostatic discharge from cables, connectors, or nearby personnel. The device is identified in distributor listings as a 2/2 full RS-232 transceiver in a 16-pin TSSOP package.
The MAX3232 family is intended for applications requiring bidirectional serial communication, including point-of-sale terminals, industrial control panels, test equipment, instrumentation, and embedded serial-port interfaces. Its dual-channel arrangement allows two transmit and two receive functions on one device, reducing the number of interface ICs required on a board.
The commercial MAX3232CPWRE4 ordering code uses the 16-terminal TSSOP format and is associated with the commercial temperature grade. The E suffix in the ordering code identifies the tube packaging format for the package code, while the R suffix identifies the standard commercial temperature range. Confirm the exact ordering information, package dimensions, electrical limits, and operating temperature limits against the current manufacturer datasheet and product page before releasing a production BOM.
For robust implementation, place the charge-pump capacitors and receiver or driver interface components close to the device and keep RS-232 traces away from sensitive analog and clock paths. The external charge-pump capacitors are part of the MAX3232 operating circuit, and their values and placement should follow the manufacturer datasheet layout guidance. This page combines manufacturer specifications, distributor identification, drop-in cross-references, and application-specific design guidance for engineers evaluating the MAX3232CPWRE4.
Bộ thay thế dễ dàng lắp đặt cho MAX3232CPWRE4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3232CPWRE4 (cùng hình factor và footprint) — khác nhau ở Package, RoHS Status, ESD Protection, Interface Standard, Product Type.
MAX3232IPWR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232EIPWG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232CPWE4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SP3232EBCY-L/TR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232CPWRE4 Thông số kỹ thuật
| Product Type | Dual RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| RS-232 Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| Channel Count | 2 drivers and 2 receivers |
| Hộp | 16-pin TSSOP |
| Terminal Count | 16 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| Maximum Supply Voltage | 3.6 V |
| Transmit Delay | 300 ns |
| Điện áp cung cấp | 1 mA |
| Interface Standard | RS-232 |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | RoHS |
Hướng dẫn cấu hình chân MAX3232CPWRE4 rectangular
Cấu hình chân cho MAX3232CPWRE4 (rectangular gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3232CPWRE4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3232CPWRE4 phù hợp cho 6 Áp dụngs: Industrial Serial Control Panels, Point-of-Sale Terminals, Embedded UART-to-RS-232 Bridges, Test and Measurement Instruments, Instrumentation and Data Acquisition, Network and Communication Equipment.
Industrial Serial Control Panels
The MAX3232CPWRE4 fits industrial control-panel designs that need to connect a 3.3 V or 5 V controller to an RS-232 service port. Its two-driver, two-receiver arrangement supports bidirectional serial communication without requiring separate transceiver ICs. The 250 kbps data rate is suitable for configuration transfer, diagnostics, and supervisory commands, while ±15 kV ESD protection helps the external cable interface withstand electrostatic discharge. Designers should preserve the manufacturer-specified charge-pump capacitor layout and use the device within its documented 3 V to 5.5 V supply range.
Được đề xuất
Point-of-Sale Terminals
Point-of-sale equipment often uses an RS-232 port for peripherals such as scales, printers, or customer displays. The MAX3232CPWRE4 provides two transmit and two receive channels in a compact 16-pin TSSOP package, helping conserve board area in compact terminal electronics. Its 3 V to 5.5 V operating range allows interface to common logic rails, and the 250 kbps rate is more than adequate for typical transaction and control traffic. Use a protected connector path and follow the datasheet ground and charge-pump capacitor recommendations.
Được đề xuất
Embedded UART-to-RS-232 Bridges
The MAX3232CPWRE4 is appropriate for embedded boards that expose an RS-232 port alongside a modern UART controller. It translates logic-level UART signals to RS-232 line levels and returns received data to the controller. The dual-channel implementation allows two independent communications paths, while the 3 V to 5.5 V range supports both 3.3 V and 5 V embedded designs. The 250 kbps maximum rate is suitable for many legacy peripheral protocols. For reliable operation, keep capacitor loops compact and route cable-side signals away from sensitive circuitry.
Được đề xuất
Test and Measurement Instruments
Laboratory and field-test instruments frequently require an RS-232 connection for legacy equipment control or data capture. The MAX3232CPWRE4 combines two RS-232 drivers and two receivers with a 250 kbps data rate in one 16-pin TSSOP device, simplifying the interface section of a multi-function instrument. ±15 kV ESD protection is valuable when the port connects to an external cable. The design must still account for the instrument's ground architecture, connector selection, and any isolation requirement; the MAX3232 itself does not provide galvanic isolation.
Được đề xuất
Instrumentation and Data Acquisition
Data-acquisition equipment can use the MAX3232CPWRE4 to connect a controller or host to RS-232-compatible instruments. Its dual-channel architecture reduces the number of interface components compared with separate driver and receiver devices, while its 250 kbps rate supports many configuration and status-reporting links. Because instrumentation systems can have long cables and multiple grounded endpoints, use a suitable connector and cable arrangement and evaluate grounding carefully. The commercial temperature-grade designation should be reviewed against the intended environmental range.
Được đề xuất
Network and Communication Equipment
The MAX3232CPWRE4 can provide a legacy RS-232 service or configuration port on communication equipment that otherwise uses modern digital interfaces. Two transmit and two receive channels allow a single IC to support more than one serial function, depending on the board's channel allocation. The 3 V to 5.5 V supply range is compatible with common embedded logic levels, and the 250 kbps rate supports administrative traffic rather than high-throughput protocols. Place the IC and its charge-pump capacitors away from switching supplies and high-speed clock traces.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3232CPWRE4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3232IPWR | MAX3232E | MAX3232CPWE4 | SP3232EBCY-L/TR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | MaxLinear |
| Function | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | Improved MAX3232 direct replacement | 2/2 RS-232 transceiver | Functional equivalent RS-232 transceiver |
| Pin Compatibility | Reference device | Consistent terminals and package | Direct drop-in replacement | Consistent terminals and package | Pin compatible |
Bảo phân biệt quan trọng
- Documented direct replacement path within the MAX3232 family (vsMAX3232IPWR)
- Improved family option for new designs (vsMAX3232E)
- Cross-manufacturer sourcing option (vsSP3232EBCY-L/TR)
- RS-232 performance and protection in a compact package (vsMAX3232CPWE4)
Ghi chú thiết kế
Place the MAX3232 charge-pump capacitors and required bypass capacitors close to their associated device pins, following the manufacturer datasheet schematic and layout example. Keep the high-current capacitor loops compact to reduce radiated and conducted noise. Route the RS-232 driver outputs directly toward the connector while keeping receive inputs away from switching nodes and noisy digital signals.
Do not treat the MAX3232 as an isolated RS-232 interface. The device provides logic-to-RS-232 level translation and ESD protection, but it does not provide galvanic isolation. If the connected equipment uses a different ground potential, use an appropriately rated isolation method and verify that the external cable and connector arrangement does not create an unsafe ground path.
Separate the cable-side RS-232 nets from sensitive analog, oscillator, and high-speed digital traces. Maintain a continuous ground reference and place interface protection at the connector boundary when additional surge or ESD protection is required. Confirm the final connector pinout and shield connection to avoid introducing ground loops into the completed equipment.
The verified MAX3232 family rating is 250 kbps, so the UART baud rate must be selected with normal start and stop-bit overhead in mind. Use the manufacturer timing limits to evaluate the complete data path, and avoid assuming that a nominal 250 kbps UART setting provides a full 250,000-byte-per-second application payload. For longer cables, consider signal-conditioning or isolation requirements.
Thông tin tuân thủ
The verified component listing identifies the MAX3232CPWRE4 as RoHS. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was found for the exact ordering code.