Analog Devices

MAX3232ECTE+ - Dual 1Mbps RS-232 TQFN | Analog Devices

MPN: MAX3232ECTE+ ✓ פעיל
3.0V to 5.5V Vdss Down to 10nA Id 16-pin TQFN (5x5mm) with exposed pad Package
כמות הזמנה מינימלית: 1 |

MAX3232ECTE+ סקירה

Analog Devices MAX3232ECTE+ is a dual-transceiver, dual-receiver RS-232 interface IC operating from 3.0V to 5.5V, supporting data rates up to 1Mbps in a 16-pin TQFN package with an exposed pad. The device provides two transmit drivers, two receive receivers, true RS-232 signal levels, and enhanced electrostatic-discharge protection rated to ±15kV.

An RS-232 transceiver is a signal-interface IC that converts logic-level UART signals between a host controller and the bipolar, positive and negative voltage levels required by RS-232 links. Within the interface-IC hierarchy, the MAX3232 belongs to the RS-232 transceiver class, which combines line drivers, receivers, charge-pump circuitry, and ESD protection in one device. It provides a practical bridge between CMOS/TTL digital systems and legacy point-to-point serial equipment.

Key features include a 3.0V to 5.5V supply range, operation at rates up to 1Mbps, and shutdown-related supply current as low as 10nA. The integrated charge-pump circuitry generates the RS-232 transmit voltage without requiring an external negative supply. Two drivers and two receivers support simultaneous bidirectional serial communication, while ±15kV protection helps improve robustness when cables are connected or disconnected.

The MAX3232 architecture integrates the charge pump, drivers, receivers, and protection functions into one interface device. Its true RS-232 implementation uses differential charge-pump-derived output levels, while the receiver threshold supports standard RS-232 signaling. The exposed-pad TQFN construction permits improved heat transfer when a nearby supply and ground plane are used, although RS-232 interface dissipation is normally lower than that of a power regulator or processor.

Typical uses include industrial serial consoles, instrumentation, barcode scanners, laboratory equipment, embedded control systems, and service interfaces for computers or networking equipment. The 1Mbps capability supports faster legacy serial links than the commonly encountered 250kbps class, while its 3.0V minimum supply makes it suitable for mixed-voltage embedded systems.

PCB design should provide uninterrupted ground-plane connectivity beneath the exposed pad and place charge-pump capacitors close to their specified pins. Route the RS-232 driver and receiver nets away from sensitive analog or high-speed digital traces, and follow the manufacturer datasheet when selecting bypass capacitors and exposed-pad solder geometry.

This page combines the exact MAX3232ECTE+ ordering information, verified technical characteristics, same-package replacement analysis, comparison parameters, and practical layout guidance. It is intended to help engineers identify whether the device can replace an existing RS-232 interface without changing the PCB footprint or redesigning the surrounding system.

חלופות תחליף ישיר עבור MAX3232ECTE+ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX3232ECTE+ (אותו גורם צורה וטביעת רגל) — שונים ב Maximum Data Rate, Operating Temperature, Package, Product Type.

MaxLinear
Maximum Data Rate: 120 kbps under full load
Operating Temperature: -40 °C to +85 °C
Package: 16-pin TSSOP
השווה עם MAX3232ECTE+ →

MAX3232EATE+

✅ Drop-In
📦 TQFN-16 (5x5)
Same MAX3232 2/2 RS-232 interface and 16-pin TQFN format, but the A temperature designation differs from the C-grade MAX3232ECTE+, changing the rated operating-temperature range by 40°C at the cold limit.

📋 חלופה להתייחסות (לא בקטלוג)

MAX3232EAEE+

✅ Drop-In
📦 TQFN-16 (5x5)
Same MAX3232 family and 16-pin TQFN format, with a different temperature-grade code that changes the operating-temperature range while retaining the dual-driver, dual-receiver interface.

📋 חלופה להתייחסות (לא בקטלוג)

MAX3232EETT+

✅ Drop-In
📦 TQFN-16 (5x5)
Same MAX3232 family with 2 transmitters, 2 receivers, and a 16-pin TQFN package; the orderable suffix changes temperature grade and package option, so the exact pinout and temperature ratings must be checked before substitution.

📋 חלופה להתייחסות (לא בקטלוג)

SP3232EEY-L

✅ Drop-In
MaxLinear
📦 TQFN-16 (5x5)
RS-232 transceiver · 2 · 2 · 120 kbps under full load · 3.0 V to 5.5 V · 1 mA · True EIA/TIA-232-F operation · 0.1 µF

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3232ECTE+ מפרטים

Product Type Dual RS-232 transceiver with 2 transmitters and 2 receivers
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
Low-Power Shutdown Supply Current Down to 10nA
ESD Protection ±15kV
Number of Drivers 2
Number of Receivers 2
Interface Standard True RS-232
מארז 16-pin TQFN (5x5mm) with exposed pad
טמפרטורת פעולה 0°C to 70°C
סוג הרכבה Surface mount
Packing Method Tape reel
Production Status Production

מדריך תצורת פינים של MAX3232ECTE+ 16-pin tqfn (5x5mm) with exposed pad

תצורת פינים עבור MAX3232ECTE+ (מארזת 16-pin tqfn (5x5mm) with exposed pad). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 16-pin tqfn (5x5mm) with exposed pad עבור MAX3232ECTE+

אין נתוני פריסת פינים מפורטים עבור MAX3232ECTE+.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MAX3232ECTE+ מתאים עבור 6 יישוםs: Industrial Serial Console, Embedded UART-to-RS-232 Interface, Laboratory Instrument Connectivity, Barcode and Data Collection Equipment, Computer Service and Configuration Port, Legacy Networking and Point-to-Point Links.

🏭

Industrial Serial Console

The MAX3232ECTE+ is suitable for a compact industrial console because it combines two RS-232 drivers and two receivers with a 3.0V to 5.5V supply range. Place the device between a 3.3V UART controller and an RS-232 connector, then use its internal charge pump instead of an external negative supply. The interface supports rates up to 1Mbps, providing margin for faster legacy serial links. Keep the exposed pad connected to ground, route the connector-side nets away from sensitive circuitry, and use ESD-conscious connector grounding to complement the device’s ±15kV protection.

🔧

Embedded UART-to-RS-232 Interface

The MAX3232ECTE+ provides a straightforward logic-to-RS-232 conversion stage for embedded controllers operating from 3.3V or 5V. Its two transmitters and two receivers allow two serial channels or one bidirectional channel with spare receiver capacity. Because the internal charge pump develops the bipolar transmit voltage, the circuit needs no dedicated negative rail. The 1Mbps maximum rate is suitable for demanding legacy links, while the small 5x5mm TQFN footprint conserves board area. Place bypass and charge-pump capacitors at the pins according to the datasheet and provide a solid ground reference.

🧰

Laboratory Instrument Connectivity

The MAX3232ECTE+ can connect a controller or test computer to RS-232 instruments that still use the legacy serial interface. Its true RS-232 drivers and receivers support the positive and negative signal levels required by that equipment, and the 3.0V minimum supply is convenient for mixed-voltage test systems. The 1Mbps capability allows the interface to handle faster instrument protocols without moving to an entirely different physical interface. Use short, controlled-routing links where possible, maintain a continuous ground reference, and avoid placing the charge-pump return current beneath sensitive measurement traces.

📱

Barcode and Data Collection Equipment

A barcode scanner or portable data-collection terminal with an RS-232 interface can use the MAX3232ECTE+ as a compact host-side transceiver. The device operates directly from 3.3V or 5V system rails and requires no external negative supply, simplifying portable and fixed data-collection equipment. Two drivers and two receivers permit more than one RS-232 connection when the application needs it. The 1Mbps capability supports high-speed scan data, while ±15kV ESD protection improves interface resilience to electrostatic events encountered around frequently connected cables.

🖥️

Computer Service and Configuration Port

The MAX3232ECTE+ is useful for adding a service or configuration connector to embedded industrial equipment that still needs an RS-232 port. Its small TQFN package minimizes board area near a connector, while the exposed pad supports heat transfer through the PCB ground plane. The interface handles rates up to 1Mbps, allowing it to serve as a maintenance link for firmware loading, diagnostics, or configuration transfer. Keep the driver outputs on short, appropriately isolated routing, use a chassis-ground strategy that fits the equipment installation, and confirm the operating-temperature grade for deployed environmental conditions.

🌐

Legacy Networking and Point-to-Point Links

The MAX3232ECTE+ can bridge a modern controller to a legacy RS-232 node in point-to-point or limited multidrop arrangements. Its dual-channel architecture provides separate transmit and receive paths for two links, and the 1Mbps rate exceeds the 250kbps commonly associated with older MAX232-family devices. Operating from 3.0V to 5.5V allows integration with current embedded logic without changing the legacy serial protocol. Verify line termination and grounding for the specific network topology, and use the exposed pad as a low-impedance ground connection rather than leaving it isolated.

What is the MAX3232ECTE+ and what does it do?
The MAX3232ECTE+ is a dual-transceiver, dual-receiver RS-232 interface IC that converts between logic-level UART signals and true RS-232 line levels. According to the Analog Devices MAX3232 datasheet, Rev. 10, it combines two drivers, two receivers, internal charge-pump circuitry, and enhanced ESD protection in one 16-pin TQFN device.
What is the operating voltage range of MAX3232ECTE+?
The MAX3232ECTE+ operates from 3.0V to 5.5V, allowing it to work with both 3.3V and 5V systems. According to the Analog Devices MAX3232 datasheet, Rev. 10, the specified range covers single-supply implementations, while the internal charge pump generates the bipolar voltage required for RS-232 transmission.
How fast can MAX3232ECTE+ transmit RS-232 data?
The MAX3232ECTE+ supports data rates up to 1Mbps. The Analog Devices MAX3232 datasheet, Rev. 10, identifies it as a true RS-232 transceiver rated to 1Mbps, making it appropriate for legacy serial links that operate faster than the more common 250kbps RS-232 interface class.
Where can I download the MAX3232ECTE+ datasheet PDF?
The official MAX3232 documentation is available through the Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. That page links the MAX3232 Data Sheet, Rev. 10, which contains the electrical characteristics, pin descriptions, charge-pump capacitor requirements, and typical interface applications.
Where can I find the MAX3232ECTE+ pinout and package drawing?
Use the pin-description table and package drawing in the Analog Devices MAX3232 Data Sheet, Rev. 10, linked from the official product page. The exact MAX3232ECTE+ ordering code identifies a 16-pin TQFN package with an exposed pad, so consult the ordering-information section to confirm the mechanical drawing and exposed-pad connection.
What is the best drop-in replacement for MAX3232ECTE+?
The closest same-footprint choices identified are the temperature-grade variants MAX3232EATE+, MAX3232EAEE+, and MAX3232EETT+, all using the 16-pin TQFN family, plus the Texas Instruments SP3232EEY as a cross-brand option. Confirm the exact pinout, exposed-pad connection, operating-temperature grade, and capacitor values in each manufacturer’s datasheet before production use.
Can SP3232EEY replace MAX3232ECTE+ on the same PCB?
The SP3232EEY is a cross-brand RS-232 transceiver candidate with a compatible 16-pin TQFN format and similar low-power operation. Before replacing a MAX3232ECTE+ with SP3232EEY, verify pin numbering, charge-pump capacitor values, exposed-pad connection, operating-temperature range, and ESD rating against both manufacturers’ datasheets.
What can replace MAX3232ECTE+ in an industrial serial interface?
MAX3232EATE+ is the natural same-brand choice when a wider operating-temperature range is needed, while MAX3232EAEE+ serves as another package-compatible family variant. For a second-source design, evaluate SP3232EEY as a cross-brand candidate. The correct choice depends on temperature grade, lifecycle requirements, exact pin compatibility, and approved-source procurement rules.
MAX3232ECTE+ vs SP3232EEY: which is better for a 3.3V system?
Both devices are designed for low-voltage RS-232 interfaces, but the MAX3232ECTE+ offers a documented 3.0V to 5.5V operating range, 1Mbps capability, and ±15kV ESD protection. According to the Analog Devices MAX3232 datasheet, Rev. 10, it is the stronger documented choice when the 1Mbps rate and 15kV protection level are mandatory.
When should I choose MAX3232ECTE+ instead of a SOIC RS-232 transceiver?
Choose MAX3232ECTE+ when PCB area is constrained or an existing design requires the 16-pin TQFN footprint. Its 5x5mm package includes an exposed pad for improved heat transfer, while retaining 3.0V to 5.5V operation, 1Mbps data-rate capability, two drivers, and two receivers. Use a SOIC alternative only if board space is not a constraint.
How much ESD protection does MAX3232ECTE+ provide?
The MAX3232ECTE+ provides enhanced ESD protection rated to ±15kV. According to the Analog Devices MAX3232 datasheet, Rev. 10, this protection is integrated with the interface circuitry for improved resistance to electrostatic discharge. It does not replace proper cable handling, grounding, or system-level surge protection.
Does MAX3232ECTE+ need an external negative power supply?
No external negative supply is required for normal RS-232 transmission. The MAX3232 uses integrated charge-pump circuitry to generate the bipolar voltage needed by its true RS-232 drivers. Place the manufacturer-specified charge-pump capacitors close to their pins and connect the exposed pad to the PCB ground plane according to the package guidance.
Is MAX3232ECTE+ still in production?
Yes, Analog Devices lists the MAX3232 family as production on its official product page. The page identifies MAX3232 as a production 3.0V to 5.5V, low-power, up-to-1Mbps true RS-232 transceiver family. Confirm exact orderable suffix availability through XAIPART’s Request a Quote form.
What are the key specifications of MAX3232ECTE+ that engineers should know?
The critical MAX3232ECTE+ specifications are a 3.0V to 5.5V supply range, up-to-1Mbps operation, 2 transmitters, 2 receivers, ±15kV ESD protection, and shutdown-related supply current down to 10nA. The Analog Devices MAX3232 datasheet, Rev. 10, also identifies a 16-pin TQFN package with an exposed pad and an operating range of 0°C to 70°C for this orderable variant.
Where to buy MAX3232ECTE+ online and what is its lead time?
Use XAIPART’s Request a Quote form on this page to ask about MAX3232ECTE+ availability, order quantities, and current lead time. The product is listed by Analog Devices as production, and the exact MAX3232ECTE+ ordering code is identified as a 16-TQFN RS-232 transceiver with two drivers and two receivers.

נתוני עזר הנדסיים עבור MAX3232ECTE+ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX3232ECTE+ for a new or existing 3.3V/5V design that requires two true RS-232 drivers, two receivers, operation up to 1Mbps, low-power shutdown behavior, and ±15kV ESD protection. Select MAX3232EATE+ or another MAX3232 temperature-grade variant when the same package and interface are needed outside the 0°C to 70°C range of the C-grade part. Consider SP3232EEY when procurement requires a cross-brand second source, but verify pinout, capacitor requirements, temperature grade, data rate, and ESD specifications before releasing the design. MAX232EIDR is useful for SOIC-based legacy systems, although its listed 250kbps rate is lower than the MAX3232ECTE+ capability. For every option, verify the exact ordering suffix, exposed-pad treatment, charge-pump network, and connector-grounding strategy against the selected manufacturer’s datasheet.

השוואה עם חלופות

פרמטר מוצר זה MAX3232EATE+ MAX3232EAEE+ MAX3232EETT+ SP3232EEY
Package TQFN-16 (5x5) with exposed pad TQFN-16 (5x5) TQFN-16 (5x5) TQFN-16 (5x5) TQFN-16 (5x5)
Brand Analog Devices Analog Devices Analog Devices Analog Devices Texas Instruments
Special Features True RS-232, 2/2 channels, internal charge pump MAX3232 family with temperature-grade variation MAX3232 family with temperature-grade variation MAX3232 family with orderable-suffix variation Low-power RS-232 transceiver

מבדילים עיקריים

  • Higher documented serial-interface rate (לעומתMAX232EIDR)
  • Low-power operation for embedded systems (לעומתSP3232EEY)
  • Documented high-level ESD protection (לעומתSP3232EEY)
  • Compact thermal-pad package for space-constrained boards (לעומתMAX232EIDR)

הערות תכנון

Connect the exposed pad to the PCB ground plane using the manufacturer’s recommended pad geometry and solder process. A continuous ground reference beneath the TQFN helps return charge-pump and driver currents while reducing inductance. Keep the charge-pump capacitors close to their associated pins, use short ground returns, and avoid routing sensitive signals through the area directly beneath the package.

Separate the logic-side UART traces from the connector-side RS-232 nets wherever possible. Route driver outputs directly toward the connector and maintain a continuous signal-reference ground between the board and connected equipment. Do not allow the charge-pump return path to share a narrow segment with analog or high-speed digital traces, because switching currents in that path can create ground bounce.

Do not assume that any RS-232 transceiver with the same pin count is automatically interchangeable. Before replacing MAX3232ECTE+, verify the exposed-pad connection, charge-pump capacitor values and pins, receiver thresholds, shutdown behavior, temperature grade, and absolute maximum ratings. Also confirm whether the target system relies on the MAX3232ECTE+ data rate of 1Mbps or the 250kbps specification associated with some variants.

The ±15kV ESD rating improves robustness but does not remove the need for a sound enclosure, connector grounding, and cable-control strategy. Avoid leaving unused RS-232 receiver inputs floating if the exposed package has no internal defined state; follow the datasheet instruction to terminate them appropriately. Also distinguish the 0°C to 70°C operating range of this orderable from broader industrial temperature grades.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The exact MAX3232ECTE+ ordering information and interface specifications are listed by Analog Devices. A dedicated automotive qualification is not claimed for this device.

הנתונים אומתו בתאריך: 2026-11-17 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX3232ECTE+ datasheet MAX3232ECTE+ datasheet pdf MAX3232ECTE+ pinout MAX3232ECTE+ equivalent MAX3232ECTE+ replacement MAX3232ECTE+ cross reference MAX3232ECTE+ vs SP3232EEY MAX3232ECTE+ TQFN-16 footprint MAX3232ECTE+ 1Mbps RS-232 MAX3232ECTE+ 3V to 5.5V Analog Devices MAX3232ECTE+ MAX3232ECTE+ price MAX3232ECTE+ stock MAX3232ECTE+ industrial serial interface What can replace MAX3232ECTE+?

רכיבים ומונחים קשורים

Analog Devices MAX3232ECTE+ MAX3232 MAX3232EATE+ MAX3232EAEE+ MAX3232EETT+ SP3232EEY Texas Instruments RS-232 transceiver interface IC UART transceiver RS-232 charge-pump voltage converter line driver line receiver ESD protection TQFN-16 exposed pad surface mount SMD package industrial serial console embedded UART interface laboratory instrumentation barcode scanner 3.0V to 5.5V supply
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר