MAX3232ECTE+ - Dual 1Mbps RS-232 TQFN | Analog Devices
MPN: MAX3232ECTE+ ✓ AktifMAX3232ECTE+ Ringkasan
An RS-232 transceiver is a signal-interface IC that converts logic-level UART signals between a host controller and the bipolar, positive and negative voltage levels required by RS-232 links. Within the interface-IC hierarchy, the MAX3232 belongs to the RS-232 transceiver class, which combines line drivers, receivers, charge-pump circuitry, and ESD protection in one device. It provides a practical bridge between CMOS/TTL digital systems and legacy point-to-point serial equipment.
Key features include a 3.0V to 5.5V supply range, operation at rates up to 1Mbps, and shutdown-related supply current as low as 10nA. The integrated charge-pump circuitry generates the RS-232 transmit voltage without requiring an external negative supply. Two drivers and two receivers support simultaneous bidirectional serial communication, while ±15kV protection helps improve robustness when cables are connected or disconnected.
The MAX3232 architecture integrates the charge pump, drivers, receivers, and protection functions into one interface device. Its true RS-232 implementation uses differential charge-pump-derived output levels, while the receiver threshold supports standard RS-232 signaling. The exposed-pad TQFN construction permits improved heat transfer when a nearby supply and ground plane are used, although RS-232 interface dissipation is normally lower than that of a power regulator or processor.
Typical uses include industrial serial consoles, instrumentation, barcode scanners, laboratory equipment, embedded control systems, and service interfaces for computers or networking equipment. The 1Mbps capability supports faster legacy serial links than the commonly encountered 250kbps class, while its 3.0V minimum supply makes it suitable for mixed-voltage embedded systems.
PCB design should provide uninterrupted ground-plane connectivity beneath the exposed pad and place charge-pump capacitors close to their specified pins. Route the RS-232 driver and receiver nets away from sensitive analog or high-speed digital traces, and follow the manufacturer datasheet when selecting bypass capacitors and exposed-pad solder geometry.
This page combines the exact MAX3232ECTE+ ordering information, verified technical characteristics, same-package replacement analysis, comparison parameters, and practical layout guidance. It is intended to help engineers identify whether the device can replace an existing RS-232 interface without changing the PCB footprint or redesigning the surrounding system.
Pilihan pengganti yang segera untuk MAX3232ECTE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MAX3232ECTE+ (sama faktor bentuk dan kaki) — berbeza dalam Maximum Data Rate, Operating Temperature, Package, Product Type.
MAX3232EATE+
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX3232EAEE+
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX3232EETT+
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
SP3232EEY-L
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MAX3232ECTE+ Spesifikasi
| Product Type | Dual RS-232 transceiver with 2 transmitters and 2 receivers |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| Low-Power Shutdown Supply Current | Down to 10nA |
| ESD Protection | ±15kV |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Interface Standard | True RS-232 |
| Kemasan | 16-pin TQFN (5x5mm) with exposed pad |
| Suhu Operasi | 0°C to 70°C |
| Jenis Pemasangan | Surface mount |
| Packing Method | Tape reel |
| Production Status | Production |
Panduan Konfigurasi Pin MAX3232ECTE+ 16-pin tqfn (5x5mm) with exposed pad
Konfigurasi pin untuk MAX3232ECTE+ (16-pin tqfn (5x5mm) with exposed pad pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MAX3232ECTE+.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX3232ECTE+ patut untuk 6 aplikasis: Industrial Serial Console, Embedded UART-to-RS-232 Interface, Laboratory Instrument Connectivity, Barcode and Data Collection Equipment, Computer Service and Configuration Port, Legacy Networking and Point-to-Point Links.
Industrial Serial Console
The MAX3232ECTE+ is suitable for a compact industrial console because it combines two RS-232 drivers and two receivers with a 3.0V to 5.5V supply range. Place the device between a 3.3V UART controller and an RS-232 connector, then use its internal charge pump instead of an external negative supply. The interface supports rates up to 1Mbps, providing margin for faster legacy serial links. Keep the exposed pad connected to ground, route the connector-side nets away from sensitive circuitry, and use ESD-conscious connector grounding to complement the device’s ±15kV protection.
Disebarkan
Embedded UART-to-RS-232 Interface
The MAX3232ECTE+ provides a straightforward logic-to-RS-232 conversion stage for embedded controllers operating from 3.3V or 5V. Its two transmitters and two receivers allow two serial channels or one bidirectional channel with spare receiver capacity. Because the internal charge pump develops the bipolar transmit voltage, the circuit needs no dedicated negative rail. The 1Mbps maximum rate is suitable for demanding legacy links, while the small 5x5mm TQFN footprint conserves board area. Place bypass and charge-pump capacitors at the pins according to the datasheet and provide a solid ground reference.
Disebarkan
Laboratory Instrument Connectivity
The MAX3232ECTE+ can connect a controller or test computer to RS-232 instruments that still use the legacy serial interface. Its true RS-232 drivers and receivers support the positive and negative signal levels required by that equipment, and the 3.0V minimum supply is convenient for mixed-voltage test systems. The 1Mbps capability allows the interface to handle faster instrument protocols without moving to an entirely different physical interface. Use short, controlled-routing links where possible, maintain a continuous ground reference, and avoid placing the charge-pump return current beneath sensitive measurement traces.
Disebarkan
Barcode and Data Collection Equipment
A barcode scanner or portable data-collection terminal with an RS-232 interface can use the MAX3232ECTE+ as a compact host-side transceiver. The device operates directly from 3.3V or 5V system rails and requires no external negative supply, simplifying portable and fixed data-collection equipment. Two drivers and two receivers permit more than one RS-232 connection when the application needs it. The 1Mbps capability supports high-speed scan data, while ±15kV ESD protection improves interface resilience to electrostatic events encountered around frequently connected cables.
Disebarkan
Computer Service and Configuration Port
The MAX3232ECTE+ is useful for adding a service or configuration connector to embedded industrial equipment that still needs an RS-232 port. Its small TQFN package minimizes board area near a connector, while the exposed pad supports heat transfer through the PCB ground plane. The interface handles rates up to 1Mbps, allowing it to serve as a maintenance link for firmware loading, diagnostics, or configuration transfer. Keep the driver outputs on short, appropriately isolated routing, use a chassis-ground strategy that fits the equipment installation, and confirm the operating-temperature grade for deployed environmental conditions.
Disebarkan
Legacy Networking and Point-to-Point Links
The MAX3232ECTE+ can bridge a modern controller to a legacy RS-232 node in point-to-point or limited multidrop arrangements. Its dual-channel architecture provides separate transmit and receive paths for two links, and the 1Mbps rate exceeds the 250kbps commonly associated with older MAX232-family devices. Operating from 3.0V to 5.5V allows integration with current embedded logic without changing the legacy serial protocol. Verify line termination and grounding for the specific network topology, and use the exposed pad as a low-impedance ground connection rather than leaving it isolated.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MAX3232ECTE+ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX3232EATE+ | MAX3232EAEE+ | MAX3232EETT+ | SP3232EEY |
|---|---|---|---|---|---|
| Package | TQFN-16 (5x5) with exposed pad | TQFN-16 (5x5) | TQFN-16 (5x5) | TQFN-16 (5x5) | TQFN-16 (5x5) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Special Features | True RS-232, 2/2 channels, internal charge pump | MAX3232 family with temperature-grade variation | MAX3232 family with temperature-grade variation | MAX3232 family with orderable-suffix variation | Low-power RS-232 transceiver |
Penyeberangsung Jelas
- Higher documented serial-interface rate (vsMAX232EIDR)
- Low-power operation for embedded systems (vsSP3232EEY)
- Documented high-level ESD protection (vsSP3232EEY)
- Compact thermal-pad package for space-constrained boards (vsMAX232EIDR)
Catatan Desain
Connect the exposed pad to the PCB ground plane using the manufacturer’s recommended pad geometry and solder process. A continuous ground reference beneath the TQFN helps return charge-pump and driver currents while reducing inductance. Keep the charge-pump capacitors close to their associated pins, use short ground returns, and avoid routing sensitive signals through the area directly beneath the package.
Separate the logic-side UART traces from the connector-side RS-232 nets wherever possible. Route driver outputs directly toward the connector and maintain a continuous signal-reference ground between the board and connected equipment. Do not allow the charge-pump return path to share a narrow segment with analog or high-speed digital traces, because switching currents in that path can create ground bounce.
Do not assume that any RS-232 transceiver with the same pin count is automatically interchangeable. Before replacing MAX3232ECTE+, verify the exposed-pad connection, charge-pump capacitor values and pins, receiver thresholds, shutdown behavior, temperature grade, and absolute maximum ratings. Also confirm whether the target system relies on the MAX3232ECTE+ data rate of 1Mbps or the 250kbps specification associated with some variants.
The ±15kV ESD rating improves robustness but does not remove the need for a sound enclosure, connector grounding, and cable-control strategy. Avoid leaving unused RS-232 receiver inputs floating if the exposed package has no internal defined state; follow the datasheet instruction to terminate them appropriately. Also distinguish the 0°C to 70°C operating range of this orderable from broader industrial temperature grades.
Maklumat Kesediaan
The exact MAX3232ECTE+ ordering information and interface specifications are listed by Analog Devices. A dedicated automotive qualification is not claimed for this device.