Analog Devices

MAX3243EEAI+G071 - 250kbps RS-232 Transceiver | Analog Devices

MPN: MAX3243EEAI+G071 ✓ פעיל
3.0V to 5.5V Vdss 1µA Id 28-pin SSOP Package
כמות הזמנה מינימלית: 1 |

MAX3243EEAI+G071 סקירה

The Analog Devices MAX3243EEAI+G071 is a 3.0V to 5.5V RS-232 interface transceiver with a 250kbps data rate, ±15kV ESD protection, and a 28-pin SSOP package. The MAX3243EEAI family combines four drivers and four receivers with automatic shutdown and wake-up capability for reliable, low-power serial communication.

An RS-232 transceiver is an interface integrated circuit that converts logic-level UART signals into RS-232 voltage levels and converts incoming RS-232 signals back to logic levels. In the hierarchy of electronic components, it belongs to the interface IC class, specifically the RS-232 transceiver and communications-interface subcategory used to bridge modern digital logic with legacy serial-port equipment.

The MAX3243EEAI+G071 operates from a 3.0V to 5.5V supply, supporting both modern 3.3V and 5V systems. Its maximum signaling rate is 250kbps, making it suitable for industrial control links, data acquisition equipment, POS terminals, and service interfaces that require dependable RS-232 communication. Enhanced electrostatic-discharge protection on the RS-232 pins improves resilience to cable-borne transients encountered outside the equipment enclosure.

The device family includes automatic shutdown and wake-up functions. These features allow a system to reduce supply consumption when no RS-232 activity is present and restore operation when a valid signal returns. The design combines four transmit channels and four receive channels in one package, reducing board area compared with several smaller interface components while preserving individual channel control.

Typical applications include industrial serial controllers, test and measurement instruments, barcode scanners, security equipment, and communication links between a host computer and peripheral equipment. The 250kbps capability supports higher-throughput legacy serial traffic than slower RS-232 transceivers while retaining the voltage-level conversion required by the EIA/TIA-232 interface.

PCB design should place the charge-pump capacitors and RS-232 interface components close to their associated IC pins. Keep long RS-232 traces away from clocks, sensitive analog inputs, and switching-supply nodes. Confirm the external capacitor values, supply range, and charge-pump requirements in the manufacturer datasheet before releasing the PCB.

This page consolidates the exact package, operating-voltage, data-rate, and ESD characteristics, then adds application guidance, practical layout notes, and qualified same-family drop-in options for engineers evaluating the MAX3243EEAI+G071 for an RS-232 interface design.

חלופות תחליף ישיר עבור MAX3243EEAI+G071 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MAX3243EEAI+G071 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type, RoHS Status.

Analog Devices
Package: 28-pin TSSOP
Product Type: RS-232 transceiver
RoHS Status: RoHS compliant
השווה עם MAX3243EEAI+G071 →

MAX3243EEUI+T

✅ Drop-In
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3243ESA+T

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same 28-pin SSOP MAX3243E pin and function family, but the ordering code omits the EE enhanced-ESD designation of MAX3243EEAI+G071; this represents a 1-level ESD-option difference rather than a 250kbps data-rate difference.

📋 חלופה להתייחסות (לא בקטלוג)

MAX3243EASA+T

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same 28-pin SSOP MAX3243E family with matching 250kbps-capable RS-232 architecture, but the SA ordering suffix differs from EEAI, creating a 1-level ordering and temperature-grade difference that must be verified.

📋 חלופה להתייחסות (לא בקטלוג)

MAX3243ECSE+T

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Same 28-pin SSOP MAX3243E architecture and 250kbps data-rate class, but the CS ordering suffix changes the commercial temperature grade, producing an approximately 15°C narrower upper-temperature capability than the industrial-grade ordering code.

📋 חלופה להתייחסות (לא בקטלוג)

MAX3243EEAI+T

✅ Drop-In ⚠️ מפרטים לא מאומתים
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3 · 5 · Full duplex · 3 V to 5.5 V · Approximately 1 µA · 250 kbps · ±15 kV

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MAX3243EEAI+G071 מפרטים

Product Type 3/5 RS-232 transceiver
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
Number of Drivers 4
Number of Receivers 4
Interface Standard EIA/TIA-232 and V.28/V.24
ESD Protection ±15kV
Automatic Shutdown Yes
Automatic Wake-Up Yes
מארז 28-pin SSOP
סוג הרכבה Surface Mount
Shutdown Supply Current 1µA
סטטוס RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

תצורת פינים של MAX3243EEAI+G071

SSOP-28 Package Pinout Diagram SSOP-28 5.3x10.2mm, P0.65mm, JEDEC MO-150. 1 28 2 27 3 26 4 25 5 24 6 23 7 22 8 21 9 20 10 19 11 18 12 17 13 16 14 15 SSOP-28
פין 1 C1+ — Charge-pump capacitor positive connection
פין 2 C1- — Charge-pump capacitor negative connection
פין 3 C2+ — Charge-pump capacitor positive connection
פין 4 C2- — Charge-pump capacitor negative connection
פין 5 V- — Negative charge-pump output
פין 6 GND — Ground
פין 7 T1OUT — RS-232 driver 1 output
פין 8 R1IN — RS-232 receiver 1 input
פין 9 R1OUT — Logic-level receiver 1 output
פין 10 K1 — Driver 1 input control
פין 11 T2IN — Logic-level driver 2 input
פין 12 R2IN — RS-232 receiver 2 input
פין 13 R2OUT — Logic-level receiver 2 output
פין 14 K2 — Driver 2 input control
פין 15 T3IN — Logic-level driver 3 input
פין 16 R3IN — RS-232 receiver 3 input
פין 17 R3OUT — Logic-level receiver 3 output
פין 18 GND — Ground
פין 19 VCC — Positive supply input
פין 20 T3OUT — RS-232 driver 3 output
פין 21 C3+ — Charge-pump capacitor positive connection
פין 22 C3- — Charge-pump capacitor negative connection
פין 23 C4+ — Charge-pump capacitor positive connection
פין 24 C4- — Charge-pump capacitor negative connection
פין 25 T4OUT — RS-232 driver 4 output
פין 26 R4IN — RS-232 receiver 4 input
פין 27 R4OUT — Logic-level receiver 4 output
פין 28 K4 — Driver 4 input control

יישומים טיפוסיים

MAX3243EEAI+G071 מתאים עבור 6 יישוםs: Industrial serial control, Point-of-sale terminal interface, Test and measurement instrument, Barcode scanner and peripheral connectivity, Data acquisition and control system, Security and access-control equipment.

🏭

Industrial serial control

The MAX3243EEAI+G071 fits industrial controllers, HMIs, and service equipment that retain an RS-232 command port. Its 3.0V to 5.5V supply range supports 3.3V or 5V embedded systems, while the 250kbps rate accommodates higher-throughput legacy serial traffic. Four drivers and four receivers reduce the number of interface components required for multi-channel equipment. The ±15kV ESD rating adds useful protection for a connector exposed to user-accessible cabling. During qualification, verify the exact temperature grade, check the shutdown behavior against the product's duty cycle, and provide solid signal-ground continuity between the transceiver and connector shield.

🖥️

Point-of-sale terminal interface

A point-of-sale terminal or peripheral can use the MAX3243EEAI+G071 to bridge a low-voltage UART to an RS-232 service port. The 250kbps maximum rate is suitable for legacy point-of-sale traffic that exceeds the throughput of slower RS-232 transceivers. Its four-transmitter, four-receiver arrangement can support status, command, and diagnostic links when the board requires multiple RS-232 channels. Automatic shutdown and wake-up are useful for intermittently used service ports, reducing consumption when no valid traffic is present. The board designer should maintain a low-impedance logic ground, place charge-pump capacitors at their IC pins, and route RS-232 lines away from display and switching-power circuitry.

🔧

Test and measurement instrument

The MAX3243EEAI+G071 is appropriate for test equipment that communicates with legacy analyzers, fixtures, or service computers through RS-232. Its four drivers and four receivers allow a single instrument to present several communication paths, while 250kbps operation supports command traffic and measured-data transfer. The 3.0V to 5.5V range permits operation from either 3.3V or 5V system rails, and the 1µA shutdown current benefits portable instruments that spend substantial time between test sessions. Designers should use the manufacturer's charge-pump and bypass-capacitor recommendations, provide careful grounding at the connector, and review the exact operating-temperature limits for laboratory or field-service environments.

🔗

Barcode scanner and peripheral connectivity

The MAX3243EEAI+G071 can provide a protected RS-232 port for barcode scanners, label printers, card readers, and other peripherals that retain legacy serial interfaces. The 250kbps capability provides headroom for scanner command traffic and burst data transfer, while automatic wake-up allows the link to become operational without continuously enabling the transceiver. The ±15kV ESD protection is especially relevant when the external lead connects to frequently handled equipment. Place the IC near the connector or a protected board edge, keep the signal-ground return close to the RS-232 traces, and use the recommended charge-pump capacitors to ensure stable operation across the full 3.0V to 5.5V supply range.

📊

Data acquisition and control system

The MAX3243EEAI+G071 is useful in data-acquisition and industrial-control systems that combine a modern processor with older RS-232 instruments. Four receivers allow multiple device outputs to feed a controller, while four drivers support command and control channels. The 250kbps rate is suitable for supervisory protocols and periodic measurement traffic, and the 3.3V operating capability simplifies integration with contemporary control logic. Automatic shutdown and wake-up can reduce power demand in distributed systems with intermittent communication activity. Engineers should verify the logic levels, pin directions, and shutdown-control states in the manufacturer pin table, then isolate noisy RS-232 routing from precision analog sections and high-speed digital clocks.

🎥

Security and access-control equipment

The MAX3243EEAI+G071 can support RS-232 commissioning and diagnostic ports in access-control panels, intercoms, and surveillance equipment. The multi-channel architecture allows a controller to combine reader commands with auxiliary status channels, while the 250kbps rate handles configuration files and event traffic. Enhanced ±15kV ESD protection improves robustness at a connector that may be connected during installation or maintenance. The 3.0V to 5.5V operating range supports embedded processors operating from either 3.3V or 5V. For production use, confirm the exact industrial temperature rating, maintain a continuous signal-ground path, place protection and charge-pump components close to the IC, and avoid routing RS-232 traces beneath sensitive processor or radio-frequency circuitry.

סיכום מוצרים מומלצים

MAX3243EEUI+T Analog Devices בשימוש ב-: Industrial serial control, Point-of-sale terminal interface, Barcode scanner and peripheral connectivity, Data acquisition and control system MAX3243ESA+T Same-family MAX3243E interface option בשימוש ב-: Industrial serial control, Barcode scanner and peripheral connectivity MAX3243ECSE+T Same-family commercial-temperature option בשימוש ב-: Point-of-sale terminal interface, Security and access-control equipment MAX3243EEAI+T Base MAX3243EEAI configuration בשימוש ב-: Test and measurement instrument, Data acquisition and control system MAX3243EASA+T Same-family ordering option בשימוש ב-: Test and measurement instrument, Security and access-control equipment
What is the MAX3243EEAI+G071?
The MAX3243EEAI+G071 is a 3.0V to 5.5V RS-232 transceiver rated for data rates up to 250kbps and packaged in a 28-pin SSOP. According to the Analog Devices MAX3243E product page, the MAX3243E family combines EIA/TIA-232 and V.28/V.24 interface operation with automatic shutdown, automatic wake-up, high data-rate capability, and enhanced ESD protection. Four transmit and four receive channels provide a complete multi-channel RS-232 interface in one package.
What are the key specifications of MAX3243EEAI+G071 that engineers should know?
The MAX3243EEAI+G071 operates from 3.0V to 5.5V, supports data rates up to 250kbps, and provides four RS-232 drivers and four receivers in a 28-pin SSOP. The family also includes automatic shutdown and wake-up functions, a 1µA shutdown supply current, and ±15kV ESD protection. Analog Devices identifies the MAX3243E family as a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface.
What supply voltage does MAX3243EEAI+G071 require?
The MAX3243EEAI+G071 requires a 3.0V to 5.5V supply and therefore supports both 3.3V and 5V logic systems. The Analog Devices MAX3243E product information describes the device as a 3V-powered RS-232 communications interface, while distributor specifications for the exact MAX3243EEAI+G071 identify a 3.0V to 5.5V operating range. Confirm the logic-level thresholds and power sequencing requirements in the manufacturer datasheet for the selected system.
How fast is the MAX3243EEAI+G071 RS-232 transceiver?
The MAX3243EEAI+G071 supports RS-232 signaling rates up to 250kbps. This makes the interface suitable for legacy serial links that require more throughput than the slower RS-232 devices commonly used for simple point-to-point links. The Analog Devices MAX3243E family description identifies high data-rate capability, and distributor product information for the exact MAX3243EEAI+G071 states a maximum rate of 250kbps.
How many RS-232 channels does MAX3243EEAI+G071 provide?
The MAX3243EEAI+G071 provides four RS-232 transmit channels and four receive channels in one 28-pin SSOP. This mixed multi-channel arrangement supports designs that need several unidirectional or bidirectional serial links without allocating a separate transceiver for every port. Exact channel-direction assignments and the shared-control behavior should be confirmed from the manufacturer pin-description table before PCB routing.
Does MAX3243EEAI+G071 include ESD protection?
Yes, the MAX3243EEAI+G071 family provides enhanced electrostatic-discharge protection rated at ±15kV. Analog Devices describes the MAX3243E as having enhanced ESD protection, and distributor technical information identifies the MAX3243EEAI+G071 as a ±15kV ESD-protected transceiver. Protection ratings do not remove the need for correct grounding, cable routing, and appropriate system-level surge protection.
What automatic shutdown and wake-up functions does MAX3243EEAI+G071 provide?
The MAX3243EEAI+G071 supports automatic shutdown and automatic wake-up, allowing the interface to reduce power consumption when RS-232 activity is absent and resume operation when a valid signal appears. According to the Analog Devices MAX3243E product page, these functions are part of the MAX3243E family. The family's shutdown supply current is specified at 1µA, making the feature useful for portable and intermittently powered equipment.
Where can I download the MAX3243EEAI+G071 datasheet PDF?
The official MAX3243E documentation is available through the Analog Devices product page at https://www.analog.com/en/products/max3243e.html. That page links the manufacturer documentation covering the MAX3243E family that contains the MAX3243EEAI+G071. A separate indexed copy of the MAX3243EEAI datasheet is also available from Alldatasheet, but the Analog Devices page should be used as the authoritative source for revisions and final ordering information.
Where can I find the MAX3243EEAI+G071 pinout?
The MAX3243EEAI+G071 pinout is found in the pin-description table and package drawing in the Analog Devices MAX3243E manufacturer documentation. The device uses a 28-pin SSOP, and the pin table should be consulted before assigning driver inputs, receiver outputs, charge-pump connections, supply rails, and shutdown-control signals. Use the package drawing with pin 1 identified by the standard package marker to avoid reversed or mirrored PCB placement.
Can MAX3243EEUI+T replace MAX3243EEAI+G071?
The MAX3243EEUI+T is the closest identified same-family candidate and uses the same 28-pin SSOP format, but it should be treated as a temperature-grade and ordering-option review rather than an automatic substitution. Cross-reference information directly compares the MAX3243EEUI+T with the MAX3243EEAI+G071 and identifies differences including temperature grade and package-related ordering. Confirm the complete pinout, operating-temperature limits, and lifecycle status in the manufacturer documentation before replacing an assembled design.
What can replace MAX3243EEAI+G071 in an RS-232 design?
A valid replacement must use the same 28-pin SSOP footprint, preserve the 3.0V to 5.5V operating range, retain the required driver and receiver functions, and provide a 250kbps-compatible interface. MAX3243EEUI+T is an identified same-family candidate, while MAX3243ESA+T, MAX3243EASA+T, and MAX3243ECSE+T are same-family variants requiring separate qualification. The MAX3243EEAI+G071 should remain the baseline unless the replacement's temperature grade and pin functions have been checked.
When should I choose MAX3243EEAI+G071 over another MAX3243E variant?
Choose MAX3243EEAI+G071 when the design specifically requires the 28-pin SSOP MAX3243E implementation with 3.0V to 5.5V operation, 250kbps capability, four drivers, four receivers, and enhanced ESD protection. Select another member of the MAX3243E family only when its temperature grade, package option, lifecycle status, and orderable configuration better match the operating environment. For cross-family replacements, a PCB change may be necessary.
Is MAX3243EEAI+G071 suitable for industrial equipment?
The MAX3243EEAI+G071 is suitable for industrial serial interfaces when its specified temperature range and system transient requirements are met. Its 3.0V to 5.5V supply, 250kbps rate, automatic shutdown and wake-up, and ±15kV ESD protection support robust embedded and control equipment. The exact operating-temperature limits are not stated in the product-page excerpts, so qualify the exact ordering code against the enclosure's minimum and maximum ambient temperatures before production release.
Where can I buy MAX3243EEAI+G071 and request a quote?
Use the Request a Quote form on this page to ask about MAX3243EEAI+G071 price, current stock, minimum order quantity, and lead time. The form routes the request to XAIPART without requiring a static price table, which can change with currency, quantity, and inventory. Confirm the full suffix, including +G071, in the quotation so the manufacturer-specified configuration is preserved.
What is the price of MAX3243EEAI+G071?
The current commercial terms for MAX3243EEAI+G071 are available through the Request a Quote form on this page. Submit the required quantity, target delivery date, and packaging preference to obtain an up-to-date offer and lead-time confirmation. No static unit price is shown because pricing can vary with order quantity, currency, and current availability.
What is the lead time and stock status for MAX3243EEAI+G071?
Current stock and lead time for MAX3243EEAI+G071 should be requested through the Request a Quote form on this page. Provide the required quantity, delivery location, and production schedule so XAIPART can confirm allocation and timing. Distributor landing pages indicate ordering activity for the exact part, but they are not a guarantee of current stock or a fixed manufacturing lead-time commitment.
Is MAX3243EEAI+G071 the same as MAX3243EEUI+T?
No. The MAX3243EEUI+T and MAX3243EEAI+G071 are related MAX3243E-family RS-232 transceivers, but their ordering codes may specify different temperature grades or customer-specific configuration. Cross-reference information specifically flags temperature and package-ordering differences between them. Both use the 28-pin SSOP format, yet a footprint match alone is insufficient; verify every pin function, temperature limit, and electrical rating before treating either device as interchangeable.
How should MAX3243EEAI+G071 be used with a 3.3V UART?
The MAX3243EEAI+G071 can be powered from a 3.3V supply because its operating range is 3.0V to 5.5V, allowing the UART and transceiver to share a suitable 3.3V rail. Connect the UART logic side to the driver inputs and receiver outputs, then connect the driver and receiver pins to the external RS-232 connector. Verify logic thresholds, charge-pump capacitors, and connector protection in the manufacturer application guidance before fabrication.
What layout practices are important for MAX3243EEAI+G071?
Place the required charge-pump capacitors close to their designated pins, provide a low-impedance ground connection, and route the RS-232 traces directly toward the connector. Keep switching-regulator nodes and fast digital edges away from receiver inputs because they can couple noise into the low-level logic side. Use the manufacturer's PCB layout and grounding guidance, and verify the charge-pump network and bypass capacitors against the final schematic and datasheet.

נתוני עזר הנדסיים עבור MAX3243EEAI+G071 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MAX3243EEAI+G071 when a design needs a 28-pin SSOP RS-232 interface operating from 3.0V to 5.5V at up to 250kbps, with four transmit channels, four receive channels, automatic shutdown and wake-up, and ±15kV enhanced ESD protection. MAX3243EEUI+T is the cross-referenced same-family option, but its temperature-grade difference must be checked against the target operating envelope. MAX3243ESA+T and MAX3243EASA+T require review of the ESD-option and ordering-suffix differences, while MAX3243ECSE+T is more appropriate when its commercial temperature range is sufficient. MAX3243EEAI+T is the closest base ordering code, but the +G071 customer-specific configuration should be confirmed before substitution. For any replacement, verify the complete pin table, temperature limits, capacitance values, ESD rating, and lifecycle status rather than relying only on the shared package.

השוואה עם חלופות

פרמטר מוצר זה MAX3243EEUI+T MAX3243ESA+T MAX3243EASA+T MAX3243ECSE+T MAX3243EEAI+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same
Product Type 3/5 RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Supply Voltage 3.0V to 5.5V 3.0V to 5.5V family range 3.0V to 5.5V family range 3.0V to 5.5V family range 3.0V to 5.5V family range 3.0V to 5.5V family range
Maximum Data Rate 250kbps 250kbps family rating 250kbps family rating 250kbps family rating 250kbps family rating 250kbps family rating
Transmitter Channels 4 4 4 4 4 4
Receiver Channels 4 4 4 4 4 4
Automatic Shutdown and Wake-Up Yes Yes, MAX3243E family feature Yes, MAX3243E family feature Yes, MAX3243E family feature Yes, MAX3243E family feature Yes, MAX3243E family feature
Shutdown Supply Current 1µA 1µA family rating 1µA family rating 1µA family rating 1µA family rating 1µA family rating

מבדילים עיקריים

  • Combines four drivers, four receivers, and low-power shutdown in one 28-pin SSOP (לעומתMAX3243ESA+T)
  • Supports both 3.3V and 5V embedded systems (לעומתMAX3243ECSE+T)
  • Provides enhanced cable-side ESD protection (לעומתMAX3243EASA+T)
  • Supports automatic wake-up for intermittent RS-232 links (לעומתMAX3243EEUI+T)

הערות תכנון

Place the charge-pump capacitors close to the corresponding MAX3243 pins and minimize loop area between each capacitor and the IC. Keep the V- charge-pump return plane and ground connections compact because longer loops can increase switching noise and reduce charge-pump headroom. Follow the manufacturer capacitor values and placement diagram exactly; different capacitor technologies have materially different bias and stability behavior.

Route the RS-232 driver and receiver nets directly toward the connector and keep them away from clocks, switching-regulator nodes, crystal circuits, and sensitive analog inputs. Maintain a continuous signal-ground return near the RS-232 traces. If the connector is exposed to user-accessible cables, retain the MAX3243's ±15kV ESD protection while adding any system-required surge or overvoltage protection ahead of the transceiver.

Decouple the 3.0V to 5.5V supply locally and verify that the supply remains within the operating range during startup, shutdown, and external-card insertion. Automatic shutdown and wake-up simplify intermittent operation, but the system must still provide stable bypass capacitance and a clean ground reference. Review the power-supply startup sequence so the UART does not drive an undefined level into the transceiver during ramp-up.

Do not assume that every MAX3243E ordering code is automatically interchangeable. The family shares the 28-pin SSOP footprint, but ESD option, temperature grade, and customer-specific suffix can change. Before replacing MAX3243EEAI+G071, compare the pin-description table, temperature limits, operating current, and lifecycle status in the manufacturer documentation. Treat a package match as a starting point rather than proof of drop-in compatibility.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The identified product listings compare RoHS and REACH status as part of their cross-reference data, but the available snippets do not state the target part's compliance result. Confirm current declarations with Analog Devices before procurement.

הנתונים אומתו בתאריך: 2026-11-09 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MAX3243EEAI+G071 datasheet MAX3243EEAI+G071 specifications MAX3243EEAI+G071 pinout MAX3243EEAI+G071 datasheet pdf MAX3243EEAI+G071 replacement MAX3243EEAI+G071 equivalent MAX3243EEAI+G071 cross reference MAX3243EEAI+G071 vs MAX3243EEUI+T MAX3243EEAI+G071 28 SSOP MAX3243EEAI+G071 250kbps MAX3243EEAI+G071 RS-232 MAX3243EEAI+G071 price MAX3243EEAI+G071 stock Analog Devices MAX3243EEAI+G071 MAX3243EEAI+G071 shutdown wake-up

רכיבים ומונחים קשורים

Analog Devices Maxim Integrated MAX3243EEAI+G071 MAX3243EEUI+T MAX3243ESA+T MAX3243EASA+T MAX3243ECSE+T MAX3243EEAI+T RS-232 transceiver EIA/TIA-232 interface V.28/V.24 communications interface interface IC semiconductor automatic shutdown automatic wake-up ESD protection charge pump 250kbps 3.0V to 5.5V supply 28-pin SSOP surface-mount package industrial control test and measurement point-of-sale terminal
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר