MAX3243EEAI+G071 - 250kbps RS-232 Transceiver | Analog Devices
部品番号: MAX3243EEAI+G071 ✓ 生産中MAX3243EEAI+G071 概要
An RS-232 transceiver is an interface integrated circuit that converts logic-level UART signals into RS-232 voltage levels and converts incoming RS-232 signals back to logic levels. In the hierarchy of electronic components, it belongs to the interface IC class, specifically the RS-232 transceiver and communications-interface subcategory used to bridge modern digital logic with legacy serial-port equipment.
The MAX3243EEAI+G071 operates from a 3.0V to 5.5V supply, supporting both modern 3.3V and 5V systems. Its maximum signaling rate is 250kbps, making it suitable for industrial control links, data acquisition equipment, POS terminals, and service interfaces that require dependable RS-232 communication. Enhanced electrostatic-discharge protection on the RS-232 pins improves resilience to cable-borne transients encountered outside the equipment enclosure.
The device family includes automatic shutdown and wake-up functions. These features allow a system to reduce supply consumption when no RS-232 activity is present and restore operation when a valid signal returns. The design combines four transmit channels and four receive channels in one package, reducing board area compared with several smaller interface components while preserving individual channel control.
Typical applications include industrial serial controllers, test and measurement instruments, barcode scanners, security equipment, and communication links between a host computer and peripheral equipment. The 250kbps capability supports higher-throughput legacy serial traffic than slower RS-232 transceivers while retaining the voltage-level conversion required by the EIA/TIA-232 interface.
PCB design should place the charge-pump capacitors and RS-232 interface components close to their associated IC pins. Keep long RS-232 traces away from clocks, sensitive analog inputs, and switching-supply nodes. Confirm the external capacitor values, supply range, and charge-pump requirements in the manufacturer datasheet before releasing the PCB.
This page consolidates the exact package, operating-voltage, data-rate, and ESD characteristics, then adds application guidance, practical layout notes, and qualified same-family drop-in options for engineers evaluating the MAX3243EEAI+G071 for an RS-232 interface design.
ドロップイン代替品: MAX3243EEAI+G071 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3243EEAI+G071 (同一形状・フットプリント) — 相違点: Package, Product Type, RoHS Status.
MAX3243EEUI+T
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX3243ESA+T
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MAX3243EASA+T
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MAX3243ECSE+T
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MAX3243EEAI+T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX3243EEAI+G071 仕様
| Product Type | 3/5 RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| Number of Drivers | 4 |
| Number of Receivers | 4 |
| Interface Standard | EIA/TIA-232 and V.28/V.24 |
| ESD Protection | ±15kV |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| パッケージ | 28-pin SSOP |
| 実装タイプ | Surface Mount |
| Shutdown Supply Current | 1µA |
| RoHS ステータス | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
MAX3243EEAI+G071 ピン構成
| ピン 1 | C1+ — Charge-pump capacitor positive connection |
| ピン 2 | C1- — Charge-pump capacitor negative connection |
| ピン 3 | C2+ — Charge-pump capacitor positive connection |
| ピン 4 | C2- — Charge-pump capacitor negative connection |
| ピン 5 | V- — Negative charge-pump output |
| ピン 6 | GND — Ground |
| ピン 7 | T1OUT — RS-232 driver 1 output |
| ピン 8 | R1IN — RS-232 receiver 1 input |
| ピン 9 | R1OUT — Logic-level receiver 1 output |
| ピン 10 | K1 — Driver 1 input control |
| ピン 11 | T2IN — Logic-level driver 2 input |
| ピン 12 | R2IN — RS-232 receiver 2 input |
| ピン 13 | R2OUT — Logic-level receiver 2 output |
| ピン 14 | K2 — Driver 2 input control |
| ピン 15 | T3IN — Logic-level driver 3 input |
| ピン 16 | R3IN — RS-232 receiver 3 input |
| ピン 17 | R3OUT — Logic-level receiver 3 output |
| ピン 18 | GND — Ground |
| ピン 19 | VCC — Positive supply input |
| ピン 20 | T3OUT — RS-232 driver 3 output |
| ピン 21 | C3+ — Charge-pump capacitor positive connection |
| ピン 22 | C3- — Charge-pump capacitor negative connection |
| ピン 23 | C4+ — Charge-pump capacitor positive connection |
| ピン 24 | C4- — Charge-pump capacitor negative connection |
| ピン 25 | T4OUT — RS-232 driver 4 output |
| ピン 26 | R4IN — RS-232 receiver 4 input |
| ピン 27 | R4OUT — Logic-level receiver 4 output |
| ピン 28 | K4 — Driver 4 input control |
主な用途
MAX3243EEAI+G071 の用途: 6 件s: Industrial serial control, Point-of-sale terminal interface, Test and measurement instrument, Barcode scanner and peripheral connectivity, Data acquisition and control system, Security and access-control equipment.
Industrial serial control
The MAX3243EEAI+G071 fits industrial controllers, HMIs, and service equipment that retain an RS-232 command port. Its 3.0V to 5.5V supply range supports 3.3V or 5V embedded systems, while the 250kbps rate accommodates higher-throughput legacy serial traffic. Four drivers and four receivers reduce the number of interface components required for multi-channel equipment. The ±15kV ESD rating adds useful protection for a connector exposed to user-accessible cabling. During qualification, verify the exact temperature grade, check the shutdown behavior against the product's duty cycle, and provide solid signal-ground continuity between the transceiver and connector shield.
おすすめ
Point-of-sale terminal interface
A point-of-sale terminal or peripheral can use the MAX3243EEAI+G071 to bridge a low-voltage UART to an RS-232 service port. The 250kbps maximum rate is suitable for legacy point-of-sale traffic that exceeds the throughput of slower RS-232 transceivers. Its four-transmitter, four-receiver arrangement can support status, command, and diagnostic links when the board requires multiple RS-232 channels. Automatic shutdown and wake-up are useful for intermittently used service ports, reducing consumption when no valid traffic is present. The board designer should maintain a low-impedance logic ground, place charge-pump capacitors at their IC pins, and route RS-232 lines away from display and switching-power circuitry.
おすすめ
Test and measurement instrument
The MAX3243EEAI+G071 is appropriate for test equipment that communicates with legacy analyzers, fixtures, or service computers through RS-232. Its four drivers and four receivers allow a single instrument to present several communication paths, while 250kbps operation supports command traffic and measured-data transfer. The 3.0V to 5.5V range permits operation from either 3.3V or 5V system rails, and the 1µA shutdown current benefits portable instruments that spend substantial time between test sessions. Designers should use the manufacturer's charge-pump and bypass-capacitor recommendations, provide careful grounding at the connector, and review the exact operating-temperature limits for laboratory or field-service environments.
おすすめ
Barcode scanner and peripheral connectivity
The MAX3243EEAI+G071 can provide a protected RS-232 port for barcode scanners, label printers, card readers, and other peripherals that retain legacy serial interfaces. The 250kbps capability provides headroom for scanner command traffic and burst data transfer, while automatic wake-up allows the link to become operational without continuously enabling the transceiver. The ±15kV ESD protection is especially relevant when the external lead connects to frequently handled equipment. Place the IC near the connector or a protected board edge, keep the signal-ground return close to the RS-232 traces, and use the recommended charge-pump capacitors to ensure stable operation across the full 3.0V to 5.5V supply range.
おすすめ
Data acquisition and control system
The MAX3243EEAI+G071 is useful in data-acquisition and industrial-control systems that combine a modern processor with older RS-232 instruments. Four receivers allow multiple device outputs to feed a controller, while four drivers support command and control channels. The 250kbps rate is suitable for supervisory protocols and periodic measurement traffic, and the 3.3V operating capability simplifies integration with contemporary control logic. Automatic shutdown and wake-up can reduce power demand in distributed systems with intermittent communication activity. Engineers should verify the logic levels, pin directions, and shutdown-control states in the manufacturer pin table, then isolate noisy RS-232 routing from precision analog sections and high-speed digital clocks.
おすすめ
Security and access-control equipment
The MAX3243EEAI+G071 can support RS-232 commissioning and diagnostic ports in access-control panels, intercoms, and surveillance equipment. The multi-channel architecture allows a controller to combine reader commands with auxiliary status channels, while the 250kbps rate handles configuration files and event traffic. Enhanced ±15kV ESD protection improves robustness at a connector that may be connected during installation or maintenance. The 3.0V to 5.5V operating range supports embedded processors operating from either 3.3V or 5V. For production use, confirm the exact industrial temperature rating, maintain a continuous signal-ground path, place protection and charge-pump components close to the IC, and avoid routing RS-232 traces beneath sensitive processor or radio-frequency circuitry.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3243EEAI+G071 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3243EEUI+T | MAX3243ESA+T | MAX3243EASA+T | MAX3243ECSE+T | MAX3243EEAI+T |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-pin SSOP | 28-pin SSOP - same | 28-pin SSOP - same | 28-pin SSOP - same | 28-pin SSOP - same | 28-pin SSOP - same |
| Product Type | 3/5 RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Supply Voltage | 3.0V to 5.5V | 3.0V to 5.5V family range | 3.0V to 5.5V family range | 3.0V to 5.5V family range | 3.0V to 5.5V family range | 3.0V to 5.5V family range |
| Maximum Data Rate | 250kbps | 250kbps family rating | 250kbps family rating | 250kbps family rating | 250kbps family rating | 250kbps family rating |
| Transmitter Channels | 4 | 4 | 4 | 4 | 4 | 4 |
| Receiver Channels | 4 | 4 | 4 | 4 | 4 | 4 |
| Automatic Shutdown and Wake-Up | Yes | Yes, MAX3243E family feature | Yes, MAX3243E family feature | Yes, MAX3243E family feature | Yes, MAX3243E family feature | Yes, MAX3243E family feature |
| Shutdown Supply Current | 1µA | 1µA family rating | 1µA family rating | 1µA family rating | 1µA family rating | 1µA family rating |
主な差別化要因
- Combines four drivers, four receivers, and low-power shutdown in one 28-pin SSOP (vs MAX3243ESA+T)
- Supports both 3.3V and 5V embedded systems (vs MAX3243ECSE+T)
- Provides enhanced cable-side ESD protection (vs MAX3243EASA+T)
- Supports automatic wake-up for intermittent RS-232 links (vs MAX3243EEUI+T)
設計ノート
Place the charge-pump capacitors close to the corresponding MAX3243 pins and minimize loop area between each capacitor and the IC. Keep the V- charge-pump return plane and ground connections compact because longer loops can increase switching noise and reduce charge-pump headroom. Follow the manufacturer capacitor values and placement diagram exactly; different capacitor technologies have materially different bias and stability behavior.
Route the RS-232 driver and receiver nets directly toward the connector and keep them away from clocks, switching-regulator nodes, crystal circuits, and sensitive analog inputs. Maintain a continuous signal-ground return near the RS-232 traces. If the connector is exposed to user-accessible cables, retain the MAX3243's ±15kV ESD protection while adding any system-required surge or overvoltage protection ahead of the transceiver.
Decouple the 3.0V to 5.5V supply locally and verify that the supply remains within the operating range during startup, shutdown, and external-card insertion. Automatic shutdown and wake-up simplify intermittent operation, but the system must still provide stable bypass capacitance and a clean ground reference. Review the power-supply startup sequence so the UART does not drive an undefined level into the transceiver during ramp-up.
Do not assume that every MAX3243E ordering code is automatically interchangeable. The family shares the 28-pin SSOP footprint, but ESD option, temperature grade, and customer-specific suffix can change. Before replacing MAX3243EEAI+G071, compare the pin-description table, temperature limits, operating current, and lifecycle status in the manufacturer documentation. Treat a package match as a starting point rather than proof of drop-in compatibility.
コンプライアンス情報
The identified product listings compare RoHS and REACH status as part of their cross-reference data, but the available snippets do not state the target part's compliance result. Confirm current declarations with Analog Devices before procurement.