MAX3243IDBR - 3.3V 5V 250kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3243IDBR ✓ פעילMAX3243IDBR סקירה
An RS-232 transceiver is an interface IC that combines voltage-line drivers and receivers for serial communication using the RS-232 standard. It belongs to the broader categories of communication interface ICs, interface transceivers, and data-conversion semiconductors. The MAX3243IDBR is intended for systems that need multiple serial channels without allocating a separate driver or receiver for every line.
The 3.0-V to 5.5-V supply range supports both 3.3-V and 5-V system rails, while the 250-kbps signaling rate covers common control, configuration, and point-to-point communication links. The integrated ±15-kV human-body-model ESD protection improves tolerance to electrostatic discharge at externally accessible connector pins. The industrial temperature option is specified for operation from -40°C to +85°C.
The 28-pin SSOP package is useful for compact board layouts where a higher pin-count RS-232 interface is needed. Its pin arrangement must be matched against the manufacturer datasheet when assigning driver outputs, receiver inputs, supply, ground, and enable-related functions. The MAX3243 family also includes related product variants, so designers should verify the exact ordering code when using a substitute.
Typical applications include industrial serial adapters, programmable logic controllers, test equipment, barcode scanners, and embedded control boards. In a PLC or embedded controller, the three drivers can send commands to external modules while five receivers monitor incoming status lines. The 250-kbps rate is more appropriate for control and instrumentation traffic than for high-speed storage transfers.
For a new layout, place protection and bypass components close to the device and route exposed RS-232 traces away from sensitive analog and clock nodes. Confirm that the selected connector, cable, and ground strategy are appropriate for the intended RS-232 environment. This page combines the manufacturer specifications, package information, sourcing workflow, replacement guidance, and practical design considerations for faster component selection.
חלופות תחליף ישיר עבור MAX3243IDBR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MAX3243IDBR (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type, Supply Voltage Range.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMAX3243IDBR מפרטים
| Product Type | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Nominal Supply Voltage | 3.3 V |
| קצב נתונים | 250 kbps |
| Driver Count | 3 drivers |
| Receiver Count | 5 receivers |
| ESD Protection | ±15 kV HBM |
| Technology | RS-232 and CMOS |
| טמפרטורת פעולה | -40°C to +85°C |
| מארז | 28-pin SSOP (DB) |
| Package Dimensions | 5.30 mm package width |
| סוג הרכבה | Surface mount |
| Device Type | Transceiver |
מדריך תצורת פינים של MAX3243IDBR 5.30 mm package width
תצורת פינים עבור MAX3243IDBR (מארזת 5.30 mm package width). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MAX3243IDBR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MAX3243IDBR מתאים עבור 6 יישוםs: Industrial serial control interface, Programmable logic controller communication, Barcode scanner and test equipment, Embedded serial adapter, Security and access-control equipment, Instrumentation and measurement control.
Industrial serial control interface
The MAX3243IDBR fits industrial controllers that need several RS-232 command and status paths on a compact board. Its three drivers can send commands to external modules, while five receivers monitor equipment feedback, interlocks, and remote sensors. The 250-kbps maximum data rate is appropriate for supervisory control and configuration traffic rather than high-speed bulk transfer. Operation from -40°C to +85°C supports temperature-controlled industrial enclosures, and the 28-pin SSOP consolidates multiple interface functions into one package. Designers should account for RS-232 levels, connector exposure, grounding, and the possible need for external protection at cable entry.
מומלץ
Programmable logic controller communication
The MAX3243IDBR is appropriate for programmable logic controllers and remote I/O modules that exchange command and status information over RS-232. Three driver channels support outgoing commands to displays, programmers, or peripheral equipment, while five receiver channels support incoming state and alarm signals. The 250-kbps rate matches conventional controller update traffic, and the 3.0-V to 5.5-V supply range allows integration with 3.3-V logic systems or 5-V interface equipment. The compact SSOP-28 footprint helps preserve board area, although close connector placement and careful separation between RS-232 traces and sensitive control circuitry remain important.
מומלץ
Barcode scanner and test equipment
The MAX3243IDBR can connect barcode scanners, bench instruments, and configuration equipment to an embedded controller. The integrated three-driver and five-receiver arrangement allows one serial port to handle several command and handshake lines while conserving external transceiver count. A 250-kbps rate is well suited to short configuration packets, trigger signals, acknowledgments, and status reporting. Its ±15-kV HBM ESD rating adds useful protection for equipment with accessible ports, while the -40°C to +85°C range supports industrial test environments. Cable shielding and connector grounding should still be selected according to the installation and ESD-risk assessment.
מומלץ
Embedded serial adapter
The MAX3243IDBR is useful in embedded serial adapters that expose legacy equipment connections to a controller or host processor. Three transmit channels can manage multiple outbound commands, and five receive channels can collect acknowledgments and status lines without requiring five separate receiver ICs. The 3.0-V to 5.5-V operating range supports embedded platforms operating at 3.3 V as well as legacy 5-V peripherals. At 250 kbps, the interface handles configuration and supervisory traffic efficiently. Designers should define the connector pinout, avoid ground-current paths through signal returns, and verify that the external cable length and connector type match the RS-232 application.
מומלץ
Security and access-control equipment
The MAX3243IDBR can serve as a multi-line RS-232 interface in access-control panels and security equipment that communicate with readers, credential devices, or configuration tools. Its three drivers support outbound commands, while five receivers allow several acknowledgment and status inputs to be monitored. The ±15-kV HBM ESD protection is valuable around user-accessible equipment, although installers still require proper enclosure and cable-control measures. The 250-kbps rate is sufficient for access-control commands, event reporting, and configuration exchanges. The -40°C to +85°C temperature specification supports deployment across controlled indoor or industrial locations where the enclosure does not maintain room temperature.
מומלץ
Instrumentation and measurement control
The MAX3243IDBR fits instrumentation systems that need several RS-232 control and monitoring lines alongside a host controller. Driver outputs can send commands to test fixtures, while multiple receiver inputs can collect ready, fault, limit, and acknowledgement signals. The 250-kbps signaling rate supports typical laboratory-control protocols and short diagnostic exchanges. Its 3.0-V to 5.5-V supply range provides flexibility between modern 3.3-V control logic and 5-V peripheral interfaces, and the 28-pin SSOP helps reduce board area. Layout should keep long RS-232 routes away from precision analog sections, with grounding and return-current paths planned at the connector and system levels.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MAX3243IDBR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
הערות תכנון
Use the Texas Instruments MAX3243 datasheet package drawing to create the SSOP-28 land pattern, including pin-1 orientation and exposed copper recommendations. Keep the footprint geometry synchronized with the assembly-house PCB library, and avoid placing tall components over the narrow lead rows where they could interfere with paste printing or inspection.
Route RS-232 driver outputs as short, controlled traces to the connector and keep them separated from receiver inputs where practical. Maintain a continuous ground reference near the interface route, and avoid sharing narrow return-current paths with sensitive analog or switching circuitry. This reduces susceptibility to common-mode noise and ground bounce.
Do not substitute a single-channel RS-232 transceiver for the MAX3243IDBR without redesigning the PCB and verifying the system protocol. The target provides three drivers and five receivers in a 28-pin SSOP, so channel count, pin mapping, enable behavior, and package dimensions must all match before a part is considered a true drop-in replacement.
מידע על תאימות
The MAX3243IDBR is an industrial-temperature interface IC, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status was stated in the available manufacturer and distributor information.