Texas Instruments

MAX3243IDBR - 3.3V 5V 250kbps RS-232 Transceiver | Texas Instruments

部品番号: MAX3243IDBR ✓ 生産中
3.0 V to 5.5 V Vdss 28-pin SSOP (DB) Package
MOQ: 1 |

MAX3243IDBR 概要

The Texas Instruments MAX3243IDBR is a 3. to 5.5-V multichannel RS-232 line driver and receiver with 250 kbps data rate and ±15-kV ESD protection, housed in a 28-pin SSOP (DB) package. The device integrates three RS-232 drivers and five receivers, providing a compact interface for low-speed serial data, industrial-control links, and equipment communication.

An RS-232 transceiver is an interface IC that combines voltage-line drivers and receivers for serial communication using the RS-232 standard. It belongs to the broader categories of communication interface ICs, interface transceivers, and data-conversion semiconductors. The MAX3243IDBR is intended for systems that need multiple serial channels without allocating a separate driver or receiver for every line.

The 3.0-V to 5.5-V supply range supports both 3.3-V and 5-V system rails, while the 250-kbps signaling rate covers common control, configuration, and point-to-point communication links. The integrated ±15-kV human-body-model ESD protection improves tolerance to electrostatic discharge at externally accessible connector pins. The industrial temperature option is specified for operation from -40°C to +85°C.

The 28-pin SSOP package is useful for compact board layouts where a higher pin-count RS-232 interface is needed. Its pin arrangement must be matched against the manufacturer datasheet when assigning driver outputs, receiver inputs, supply, ground, and enable-related functions. The MAX3243 family also includes related product variants, so designers should verify the exact ordering code when using a substitute.

Typical applications include industrial serial adapters, programmable logic controllers, test equipment, barcode scanners, and embedded control boards. In a PLC or embedded controller, the three drivers can send commands to external modules while five receivers monitor incoming status lines. The 250-kbps rate is more appropriate for control and instrumentation traffic than for high-speed storage transfers.

For a new layout, place protection and bypass components close to the device and route exposed RS-232 traces away from sensitive analog and clock nodes. Confirm that the selected connector, cable, and ground strategy are appropriate for the intended RS-232 environment. This page combines the manufacturer specifications, package information, sourcing workflow, replacement guidance, and practical design considerations for faster component selection.

ドロップイン代替品: MAX3243IDBR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3243IDBR (同一形状・フットプリント) — 相違点: Package, Product Type, Supply Voltage Range.

Texas Instruments
Package: 28-pin SSOP
Product Type: Multichannel RS-232 line driver and receiver
Supply Voltage Range: 3 V to 5.5 V
比較対象 MAX3243IDBR →

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

MAX3243IDBR 仕様

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3.0 V to 5.5 V
Nominal Supply Voltage 3.3 V
データレート 250 kbps
Driver Count 3 drivers
Receiver Count 5 receivers
ESD Protection ±15 kV HBM
Technology RS-232 and CMOS
動作温度 -40°C to +85°C
パッケージ 28-pin SSOP (DB)
Package Dimensions 5.30 mm package width
実装タイプ Surface mount
Device Type Transceiver

MAX3243IDBR 5.30 mm package width ピン配置ガイド

MAX3243IDBR (5.30 mm package width パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3243IDBR の 5.30 mm package width パッケージピン配置図

詳細なピン配置データはありません: MAX3243IDBR.

詳細は データシート をご参照ください。

主な用途

MAX3243IDBR の用途: 6 件s: Industrial serial control interface, Programmable logic controller communication, Barcode scanner and test equipment, Embedded serial adapter, Security and access-control equipment, Instrumentation and measurement control.

🏭

Industrial serial control interface

The MAX3243IDBR fits industrial controllers that need several RS-232 command and status paths on a compact board. Its three drivers can send commands to external modules, while five receivers monitor equipment feedback, interlocks, and remote sensors. The 250-kbps maximum data rate is appropriate for supervisory control and configuration traffic rather than high-speed bulk transfer. Operation from -40°C to +85°C supports temperature-controlled industrial enclosures, and the 28-pin SSOP consolidates multiple interface functions into one package. Designers should account for RS-232 levels, connector exposure, grounding, and the possible need for external protection at cable entry.

⚡

Programmable logic controller communication

The MAX3243IDBR is appropriate for programmable logic controllers and remote I/O modules that exchange command and status information over RS-232. Three driver channels support outgoing commands to displays, programmers, or peripheral equipment, while five receiver channels support incoming state and alarm signals. The 250-kbps rate matches conventional controller update traffic, and the 3.0-V to 5.5-V supply range allows integration with 3.3-V logic systems or 5-V interface equipment. The compact SSOP-28 footprint helps preserve board area, although close connector placement and careful separation between RS-232 traces and sensitive control circuitry remain important.

🔧

Barcode scanner and test equipment

The MAX3243IDBR can connect barcode scanners, bench instruments, and configuration equipment to an embedded controller. The integrated three-driver and five-receiver arrangement allows one serial port to handle several command and handshake lines while conserving external transceiver count. A 250-kbps rate is well suited to short configuration packets, trigger signals, acknowledgments, and status reporting. Its ±15-kV HBM ESD rating adds useful protection for equipment with accessible ports, while the -40°C to +85°C range supports industrial test environments. Cable shielding and connector grounding should still be selected according to the installation and ESD-risk assessment.

🖥️

Embedded serial adapter

The MAX3243IDBR is useful in embedded serial adapters that expose legacy equipment connections to a controller or host processor. Three transmit channels can manage multiple outbound commands, and five receive channels can collect acknowledgments and status lines without requiring five separate receiver ICs. The 3.0-V to 5.5-V operating range supports embedded platforms operating at 3.3 V as well as legacy 5-V peripherals. At 250 kbps, the interface handles configuration and supervisory traffic efficiently. Designers should define the connector pinout, avoid ground-current paths through signal returns, and verify that the external cable length and connector type match the RS-232 application.

🎥

Security and access-control equipment

The MAX3243IDBR can serve as a multi-line RS-232 interface in access-control panels and security equipment that communicate with readers, credential devices, or configuration tools. Its three drivers support outbound commands, while five receivers allow several acknowledgment and status inputs to be monitored. The ±15-kV HBM ESD protection is valuable around user-accessible equipment, although installers still require proper enclosure and cable-control measures. The 250-kbps rate is sufficient for access-control commands, event reporting, and configuration exchanges. The -40°C to +85°C temperature specification supports deployment across controlled indoor or industrial locations where the enclosure does not maintain room temperature.

🔧

Instrumentation and measurement control

The MAX3243IDBR fits instrumentation systems that need several RS-232 control and monitoring lines alongside a host controller. Driver outputs can send commands to test fixtures, while multiple receiver inputs can collect ready, fault, limit, and acknowledgement signals. The 250-kbps signaling rate supports typical laboratory-control protocols and short diagnostic exchanges. Its 3.0-V to 5.5-V supply range provides flexibility between modern 3.3-V control logic and 5-V peripheral interfaces, and the 28-pin SSOP helps reduce board area. Layout should keep long RS-232 routes away from precision analog sections, with grounding and return-current paths planned at the connector and system levels.

What is the operating voltage of MAX3243IDBR?
The MAX3243IDBR operates from 3.0 V to 5.5 V, making it suitable for both 3.3-V and 5-V systems. According to the Texas Instruments MAX3243 product information, the device is a multichannel RS-232 line driver/receiver designed for low-speed serial communication. Its 250-kbps data rate and integrated driver-receiver functions are intended for control, instrumentation, and embedded equipment links.
What is the data rate of MAX3243IDBR?
The MAX3243IDBR supports a maximum data rate of 250 kbps. The Texas Instruments product page identifies the MAX3243 as a 3- to 5.5-V multichannel RS-232 transceiver with this signaling rate. That rate is appropriate for serial configuration links, industrial controllers, status monitoring, and other modest-speed equipment interfaces rather than high-bandwidth data-transfer applications.
How many RS-232 drivers and receivers does MAX3243IDBR contain?
The MAX3243IDBR integrates three RS-232 drivers and five receivers. The TI part-details description identifies it as a 3/5 multichannel transceiver, while the manufacturer product page confirms its multichannel RS-232 architecture. This 3/5 arrangement supports designs that need more incoming status or control signals than outgoing command lines.
What ESD protection does MAX3243IDBR provide?
The MAX3243IDBR provides ±15-kV human-body-model ESD protection. This protection is specified by Texas Instruments for the MAX3243 family and is intended to improve robustness on externally accessible RS-232 connections. Designers should still use appropriate cable routing, connector practices, and system-level grounding because device ESD ratings do not replace every external protection requirement.
Where can I download the MAX3243IDBR datasheet PDF?
The official MAX3243IDBR datasheet is available through the Texas Instruments product-part details page, which links the current MAX3243 datasheet in PDF and HTML formats. The distributor datasheet listing also provides a 16-page PDF for the exact MAX3243IDBR ordering code. Use the manufacturer PDF for final electrical characteristics, pin descriptions, and application guidance.
Where can I find the MAX3243IDBR pinout?
The MAX3243IDBR pinout is published in the Texas Instruments MAX3243 datasheet. The exact package is a 28-pin SSOP with the DB suffix. Use the pin-description table and package drawing to map the three driver inputs and outputs, five receiver inputs and outputs, supply, ground, and remaining functions before laying out or modifying a PCB.
Is MAX3243IDBR suitable for industrial control systems?
Yes, the MAX3243IDBR is suitable for many industrial-control and equipment-communication systems. Its specified operating temperature range of -40°C to +85°C supports industrial environments, while three drivers and five receivers cover common command and status-line requirements. The 250-kbps rate is appropriate for control traffic rather than high-speed data streaming.
What is the MAX3243IDBR package?
The MAX3243IDBR is supplied in a 28-pin SSOP package identified by the DB package code. Texas Instruments describes the package as a 5.30-mm SSOP. Because SSOP-28 packages have closely spaced leads and a large pin count, verify the land pattern against the manufacturer package drawing and the PCB footprint library before release.
Can MAX3221IPWR replace MAX3243IDBR?
No. The MAX3221IPWR is not a drop-in replacement for the MAX3243IDBR because the MAX3221 is a single-channel transceiver in a different package, while the MAX3243IDBR provides three drivers and five receivers in a 28-pin SSOP. The different channel count and footprint would require PCB and firmware changes, so it is only a functional option for suitable redesigned links.
What is the best drop-in replacement for MAX3243IDBR?
No verified drop-in replacement with the same 28-pin SSOP footprint and equivalent 3/5-channel RS-232 configuration was identified in the available cross-reference information. Before substituting any part, confirm pin-to-pin compatibility, supply range, driver and receiver count, data rate, ESD rating, temperature range, and enable behavior. Use the Request a Quote form on this page to ask about exact-MPN sourcing.
MAX3243IDBR vs MAX3221IPWR - which is better for RS-232 control?
The MAX3243IDBR is better when a design needs three RS-232 drivers and five receivers in one 28-pin SSOP device. The MAX3221IPWR is better for a new single-channel design because it uses fewer I/O resources and a smaller package. The MAX3221IPWR is not pin-compatible with the MAX3243IDBR and cannot directly replace it without a board redesign.
When should I choose MAX3243IDBR over a single-channel RS-232 transceiver?
Choose the MAX3243IDBR when the board must support several RS-232 command and status lines, especially when transmitter and receiver counts differ. A single-channel transceiver is simpler for point-to-point links with one driver and one receiver. The MAX3243IDBR provides more integrated channel capacity while maintaining a 250-kbps rate and a 3.0-V to 5.5-V supply range.
How much power does MAX3243IDBR consume?
The MAX3243IDBR includes an AutoShutdown feature and can reach approximately 1 µA supply current when no valid signal level is sensed, according to the device-family description. Exact operating current depends on supply voltage, channel activity, and the selected operating mode. Consult the Texas Instruments datasheet for the load-state current and enable configuration.
Where can I buy MAX3243IDBR online?
Use the Request a Quote form on this page to request MAX3243IDBR availability, current commercial terms, and lead time for the exact 28-pin SSOP ordering code. The Texas Instruments part-details page confirms the orderable MAX3243IDBR configuration, while distributor listings identify the same MPN. Stock and delivery timing can change, so request a quote for the current quantity and destination.
What are the key specifications of MAX3243IDBR that engineers should know?
The key MAX3243IDBR specifications are a 3.0-V to 5.5-V supply range, 250-kbps signaling rate, three drivers, five receivers, ±15-kV HBM ESD protection, and a -40°C to +85°C operating-temperature range. The device uses a 28-pin SSOP package. These parameters place it among multichannel RS-232 interface ICs for compact industrial and embedded-control equipment.

エンジニアリング参考データ: MAX3243IDBR — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

The MAX3243IDBR is the appropriate choice when a compact design requires three RS-232 drivers and five receivers with a 250-kbps maximum data rate. Its 3.0-V to 5.5-V supply range works with 3.3-V and 5-V systems, while ±15-kV HBM ESD protection improves robustness at accessible connector pins. The -40°C to +85°C range also suits industrial equipment. A single-channel transceiver such as the MAX3221IPWR is simpler for point-to-point links but cannot replace the MAX3243IDBR on the same PCB because its channel count and package differ. Before selecting another multichannel part, verify pin-to-pin mapping, receiver and driver counts, shutdown behavior, data rate, ESD rating, and temperature coverage. If the exact ordering code is difficult to source, use the Request a Quote form and specify quantity, packaging, and target delivery requirements.

設計ノート

Use the Texas Instruments MAX3243 datasheet package drawing to create the SSOP-28 land pattern, including pin-1 orientation and exposed copper recommendations. Keep the footprint geometry synchronized with the assembly-house PCB library, and avoid placing tall components over the narrow lead rows where they could interfere with paste printing or inspection.

Route RS-232 driver outputs as short, controlled traces to the connector and keep them separated from receiver inputs where practical. Maintain a continuous ground reference near the interface route, and avoid sharing narrow return-current paths with sensitive analog or switching circuitry. This reduces susceptibility to common-mode noise and ground bounce.

Do not substitute a single-channel RS-232 transceiver for the MAX3243IDBR without redesigning the PCB and verifying the system protocol. The target provides three drivers and five receivers in a 28-pin SSOP, so channel count, pin mapping, enable behavior, and package dimensions must all match before a part is considered a true drop-in replacement.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The MAX3243IDBR is an industrial-temperature interface IC, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status was stated in the available manufacturer and distributor information.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3243IDBR datasheet MAX3243IDBR pinout MAX3243IDBR datasheet pdf MAX3243IDBR equivalent MAX3243IDBR replacement MAX3243IDBR cross reference MAX3243IDBR footprint MAX3243IDBR SSOP-28 MAX3243IDBR price MAX3243IDBR stock Texas Instruments MAX3243IDBR MAX3243IDBR 250kbps RS-232 MAX3243IDBR vs MAX3221IPWR MAX3243IDBR industrial application circuit

関連部品&用語

Texas Instruments MAX3243IDBR MAX3243 MAX3221IPWR RS-232 transceiver line driver line receiver interface IC communication interface multichannel transceiver CMOS 250 kbps 3.0 V to 5.5 V ±15 kV HBM ESD protection AutoShutdown SSOP-28 DB package surface mount industrial control programmable logic controller barcode scanner test equipment RS-232 standard
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示