MC145483EN - 13-Bit PCM Audio Codec | Freescale | SSOP-20
MPN: MC145483EN ✗ סוף ייצורMC145483EN סקירה
A PCM codec-filter is an interface IC that converts analog audio signals into digital PCM samples and reconstructs analog signals from digital PCM data. Its place in the broader signal-chain hierarchy is codec-filter → audio interface IC → interface integrated circuit → semiconductor. The MC145483EN is intended for compact telephony, voice-processing, and embedded audio designs where a single conversion channel and 13-bit resolution provide an economical balance between fidelity and implementation complexity.
The principal features of the MC145483EN include a 13-bit conversion resolution, one ADC channel, one DAC channel, 3 V operation, and a 20-pin SSOP package. The manufacturer describes the device as a MU-law-capable PCM codec-filter, while the family documentation identifies a linear PCM conversion format and 2s-complement data representation. These characteristics make the part appropriate for basic voice-band acquisition and playback rather than high-resolution multichannel audio.
The MC145483EN integrates the digital conversion interface and filtering functions needed to move one audio channel between analog circuitry and a PCM processor. Digital data is transferred through the codec's PCM interface, while the analog side interfaces with external line or voice-band circuitry. Exact clocking, timing, input bandwidth, output loading, and codec-control details should be taken from the pin-description and timing tables in the manufacturer datasheet before the device is placed in a new design.
Typical uses include one-channel voice terminals, telecommunications interfaces, industrial voice-capture modules, and embedded audio subsystems with modest resolution requirements. It can also support low-cost PCM test equipment when the system needs only one ADC path, one DAC path, and 13-bit data. For stereo or multichannel systems, several codec channels or a higher-channel-count codec would be required.
Designers should verify the exact SSOP-20 footprint, exposed-pad arrangement, power pins, analog signal levels, and control timing against the manufacturer pinout before layout. Decoupling should follow the datasheet's recommended network and be placed close to the supply pins. Analog and digital return paths should be arranged to minimize codec clock and PCM data coupling into the analog input and output stages.
This page consolidates the verified codec specifications, package information, sourcing data, related family options, and practical implementation guidance. It is intended to help engineers quickly determine whether the MC145483EN's one-channel, 13-bit, 3 V PCM architecture matches a voice or basic audio design before beginning detailed schematic and PCB work.
חלופות תחליף ישיר עבור MC145483EN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMC145483EN מפרטים
| Product Type | PCM codec-filter |
| Manufacturer | Freescale Semiconductor |
| Conversion Resolution | 13 bits |
| ADC Channels | 1 channel |
| DAC Channels | 1 channel |
| מתח אספקה | 3 V |
| Digital Data Format | 2s-complement PCM |
| Encoding Capability | MU-law |
| Signal Channel Count | 1 channel |
| מארז | 20-pin SSOP |
| סוג הרכבה | Surface-mount |
| Process Technology | CMOS |
מדריך תצורת פינים של MC145483EN 20-pin ssop
תצורת פינים עבור MC145483EN (מארזת 20-pin ssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MC145483EN.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC145483EN מתאים עבור 6 יישוםs: Single-Channel Voice Terminal, Telecommunications PCM Interface, Industrial Voice Monitoring, Basic Audio Playback Module, Embedded Voice Sensor Interface, PCM Signal Test Equipment.
Single-Channel Voice Terminal
The MC145483EN fits a basic voice terminal that must capture one analog voice signal and return one analog playback path. Its 13-bit ADC and DAC provide conversion for one channel, while the PCM interface supports digital transfer to a speech processor or communications controller. Using a 3 V codec-filter reduces the number of separate conversion functions required in a compact voice design. The principal trade-off is that only one channel is supported, so stereo or simultaneous multi-channel speech paths would require additional conversion circuitry. Analog input range, supported clocking, and timing must be matched to the voice-band source and system controller before schematic approval.
מומלץ
Telecommunications PCM Interface
The MC145483EN is appropriate for a telecommunications interface that moves one PCM voice channel between an analog line circuit and digital channel equipment. Its 13-bit conversion resolution and MU-law capability align with compact voice-processing systems, while the one ADC and one DAC cover both directions of signal conversion. The 20-pin SSOP package also supports space-constrained line-card designs. Integration does not remove the need for line conditioning, gain control, isolation, and clock-signal integrity. Confirm the manufacturer timing tables and analog signal limits against the host telecom equipment so the PCM format and control sequence remain consistent.
מומלץ
Industrial Voice Monitoring
The MC145483EN can serve as the conversion element in a one-channel industrial voice-monitoring module. A microphone preamplifier feeds the analog input, and the codec produces 13-bit PCM samples for a digital controller, logger, or communications link. The single-channel structure matches a single monitoring point and keeps the analog and digital conversion paths compact. Noise performance and usable bandwidth must be evaluated for the acoustic environment because 13-bit resolution is intended for voice-class conversion rather than high-fidelity recording. Keep the codec clock away from the microphone input and use the recommended supply-decoupling arrangement to reduce coupled noise.
מומלץ
Basic Audio Playback Module
The MC145483EN is suitable for a basic one-channel playback module in which digital PCM audio is converted into one analog output. Its 13-bit DAC can support voice prompts, status tones, and low-complexity embedded audio, while the shared codec package keeps the external signal chain straightforward. This use is most appropriate when the application does not require stereo channels, extended frequency response, or high-resolution audio. The analog output level must be conditioned for the downstream amplifier, and the PCM source must supply data in the device's expected format. Supply and ground layout should isolate the analog return from digital switching activity.
מומלץ
Embedded Voice Sensor Interface
The MC145483EN can provide the PCM conversion stage in an embedded voice-sensor interface. A conditioning amplifier can deliver one analog sensor signal to the codec, while the 13-bit digital output is processed by a microcontroller or communications module. The one-channel architecture is efficient for a single acoustic or vibration pickup and avoids unnecessary conversion channels. System designers must verify that the input bandwidth, sampling interface, and dynamic range satisfy the sensor signal. Place the analog input path away from processor clocks and high-current digital returns, and use a quiet reference and decoupling arrangement to maximize useful signal fidelity.
מומלץ
PCM Signal Test Equipment
The MC145483EN is applicable in compact PCM signal test equipment that needs to inject or capture one digital audio stream. The DAC path can generate a test PCM sequence, while the ADC path can return a sampled result for comparison. Its 13-bit resolution provides a defined conversion level for functional validation of voice codecs and interface controllers. Test accuracy remains dependent on the external clock, analog source, and measurement instrument. Use controlled stimulus levels to avoid clipping, and follow the manufacturer's timing requirements when configuring frame and bit clocks. The same device can support a loopback-oriented fixture when system timing is correctly arranged.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC145483EN — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 20-pin SSOP |
| Brand | Freescale Semiconductor |
| Product Type | PCM codec-filter |
| Conversion Resolution | 13 bits |
| ADC Channels | 1 channel |
| DAC Channels | 1 channel |
| Supply Voltage | 3 V |
| Digital Data Format | 2s-complement PCM |
| Encoding Capability | MU-law |
| Process Technology | CMOS |
מבדילים עיקריים
- Single-channel PCM conversion in a compact package (לעומתMC145483DT)
- Integrated voice-oriented conversion functions (לעומתMC145483DT)
- Purpose-built PCM codec-filter architecture (לעומתMC145483DT)
הערות תכנון
Place the input and output bypass capacitors close to their associated power pins and route analog signal traces away from frame-clock and bit-clock traces. The 20-pin SSOP footprint should be checked against the package drawing for lead pitch, pin orientation, and exposed-pad requirements. Because the MC145483EN contains both analog conversion paths and digital PCM interfaces, a clear separation between analog and digital return paths reduces coupling into the voice-band signal.
Treat the PCM clock, frame clock, and data lines as a coordinated timing group. Route them over a continuous reference plane when practical, avoid unnecessary stubs, and keep switching-node and digital clock sources away from the microphone or line input. Verify setup and hold timing using the manufacturer timing tables, especially when the host processor and codec operate from separate supply domains.
Do not substitute a related MC145483 family orderable solely because it uses a 20-pin package. Compare the package drawing, pin names, analog levels, control interface, and timing characteristics to confirm mechanical and electrical compatibility. For a production redesign, preserve the exact MC145483EN footprint and pin assignments unless the manufacturer explicitly confirms a drop-in relationship.
מידע על תאימות
The verified product records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact MC145483EN ordering code. AEC-Q100 is not applicable because this is an audio codec-filter rather than an automotive-qualified device.