MC145483SD - 13-Bit PCM Codec-Filter | NXP Semiconductors
MPN: MC145483SD ✗ סוף ייצורMC145483SD סקירה
A PCM codec-filter is an interface IC that converts analog audio signals into digital PCM data and converts digital PCM data back into an analog audio signal. In the broader electronics hierarchy, the MC145483SD belongs to the audio codec class within interface ICs and supports systems built around digital audio transmission, storage, or signal processing. The 2s-complement format provides a standardized signed digital representation for processor input and output.
The defining feature of the MC145483SD is its 13-bit resolution. Its matched ADC and DAC paths provide a compact one-channel conversion solution for equipment requiring an integrated PCM audio interface. The 20-pin SSOP package also makes the device suitable for leaded-surface-mount assembly rather than through-hole insertion. Because the available product information does not state the complete electrical limits, engineers should use the manufacturer pin-description table and electrical-characteristics tables before finalizing a new design.
The MC145483SD is associated with the Motorola MC145483 codec-filter family and is listed by NXP Semiconductors as a PCM codec/filter with a 13-bit resolution. Its integrated 1-ADC/1-DAC arrangement reduces the number of separate conversion components required in a single-channel audio path. It also places the PCM conversion and filtering functions close together, which can simplify signal routing in compact voice, communications, and embedded audio systems.
Typical applications include digital voice processing, communications equipment, audio interface modules, and embedded systems that exchange one-channel PCM audio with a digital processor. The part can be paired with a host controller that supports the required PCM timing and data format. In such systems, the analog input and output paths are filtered by the codec-filter while the digital side exchanges 13-bit 2s-complement samples.
A critical design consideration is verifying the analog supply, digital supply, clocking, and control-signal requirements against the manufacturer datasheet before layout is released. PCB designers should preserve the recommended decoupling and analog grounding arrangement and route timing-sensitive digital signals away from sensitive audio traces. Component substitutions should not be assumed to be drop-in replacements unless package, pinout, clocking, data format, and electrical limits have been independently verified.
This product page combines the identified device attributes, package information, sourcing references, engineering application guidance, and a conservative replacement assessment. It is intended to help engineers distinguish verified facts from parameters that still require confirmation from the original manufacturer documentation.
חלופות תחליף ישיר עבור MC145483SD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMC145483SD דירוגים מרביים ומאפיינים חשמליים
| Product Type | PCM codec-filter |
| ADC/DAC Configuration | 1 ADC / 1 DAC |
| רזולוציה | 13 bits |
| Data Format | 2s complement |
| Package Type | 20-pin SSOP |
| Terminal Count | 20 terminals |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| סגנון הרכבה | Surface mount |
| Temperature Grade | Industrial |
מדריך תצורת פינים של MC145483SD rectangular
תצורת פינים עבור MC145483SD (מארזת rectangular). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור MC145483SD.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC145483SD מתאים עבור 6 יישוםs: Digital Voice Processing, Communications Audio Interface, Industrial Audio Control Module, Audio Test and Measurement Equipment, Embedded Audio Data Acquisition, Audio Codec Evaluation and Legacy Maintenance.
Digital Voice Processing
The MC145483SD fits a single-channel digital voice path because it combines one ADC, one DAC, and filtering functions in one 13-bit PCM codec-filter. A host processor can exchange 2s-complement PCM samples with the codec while the analog side handles microphone-level or line-level audio. The 20-pin SSOP package limits board area, but clocking, sample rate, analog levels, and supply requirements must be confirmed from the manufacturer documentation before the circuit is finalized.
מומלץ
Communications Audio Interface
MC145483SD can serve as the analog-to-digital and digital-to-analog boundary in a communications module that handles one PCM voice channel. Its 13-bit conversion resolution and integrated filtering reduce the number of separate codec functions required near a digital communications processor. The design must preserve the required PCM timing, data framing, and 2s-complement format, while analog layout should minimize coupling between the input and output sections.
מומלץ
Industrial Audio Control Module
The industrial temperature grade associated with MC145483SD makes it relevant to compact industrial audio modules that exchange one channel of PCM data with embedded control electronics. Its combined ADC, DAC, and filter functions can simplify signal conditioning around a processor-based control system. Actual environmental suitability depends on confirming the full operating-temperature limits and assessing vibration, temperature gradients, grounding, and enclosure requirements at the system level.
מומלץ
Audio Test and Measurement Equipment
MC145483SD can be used in a compact single-channel test fixture where a processor needs to inject or capture a digital PCM audio stream. The integrated one-channel ADC and DAC reduce the conversion-chain complexity compared with separate devices, while the 13-bit format provides a defined sample representation. Calibration, full-scale analog levels, clock accuracy, and acceptable distortion must be evaluated before using the codec for precision measurement.
מומלץ
Embedded Audio Data Acquisition
MC145483SD is suitable for a small embedded acquisition or playback system that requires one analog audio channel and a host-side PCM data path. Its 13-bit ADC and DAC provide matched conversion functions in one 20-pin SSOP, reducing component count around the processor. Engineers should verify supported sampling rates, clock generation, input impedance, output loading, and bypass requirements before committing to the legacy interface architecture.
מומלץ
Audio Codec Evaluation and Legacy Maintenance
MC145483SD is particularly relevant to maintenance and evaluation platforms built around the original MC145483 codec-filter design. Its defined 13-bit resolution, one ADC, one DAC, 2s-complement format, and 20-pin SSOP package make it useful for reproducing an existing signal path or troubleshooting legacy hardware. For a new platform, compare the device against current audio codecs and use the manufacturer pin table to create a verified equivalent footprint if redesign is permitted.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC145483SD — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 20-pin SSOP |
| Brand | NXP Semiconductors |
| Product Type | PCM codec-filter |
| Resolution | 13 bits |
| ADC/DAC Configuration | 1 ADC / 1 DAC |
| — | 2s complement |
| Temperature Grade | Industrial |
| Mounting Type | Surface mount |
| Terminal Form | Gull wing |
| Terminal Count | 20 terminals |
מבדילים עיקריים
- Integrated single-channel conversion and filtering (לעומתMC145423DT)
- Defined 2s-complement PCM representation (לעומתMC145170DT2)
- Single-package analog input and output functions (לעומתDiscrete ADC and DAC implementation)
הערות תכנון
Assign every terminal from the manufacturer pin-description table before schematic capture and PCB layout. The MC145483SD is a mixed-signal device, so keep analog input and output return paths short, place required bypass capacitors close to their designated supply pins, and avoid routing clock or digital data traces beneath sensitive analog nodes. Because no verified pin map is reproduced on this page, the original diagram must remain the controlling layout reference.
Treat the PCM clock and data connections as timing-sensitive interfaces. Route clock and data together as a controlled group, use a continuous reference plane where possible, and keep switching-node or high-current traces away from the analog input and output region. Confirm the host processor's required data setup, hold time, PCM framing, and clock polarity against the manufacturer timing information before finalizing the interface.
Do not treat a same-family part as a drop-in substitute without checking package drawings, pin functions, supply rails, clocking, sampling rate, and digital data format. In particular, the MC145423DT and MC145170DT2 are useful comparison references but are not verified SSOP pin-to-pin replacements for the MC145483SD. Also verify that the complete operating-temperature range matches the equipment's internal ambient and enclosure temperatures.
Preserve the recommended analog and digital grounding arrangement when translating the manufacturer's application circuit to a multilayer PCB. Separate noisy digital return paths from the codec's analog reference, keep external filter or bypass components close to their associated pins, and provide adequate copper around the SSOP leads for repeatable assembly. The package's gull-wing geometry also requires proper lead-length and solder-joint controls.
מידע על תאימות
A cross-reference comparison page refers to RoHS and REACH attributes, but no definitive compliance values for MC145483SD were established. AEC-Q100, lead-free, halogen-free, and conflict-minerals status also remain unconfirmed.