MC9S08QB8CWL - 8-Bit 20MHz USB MCU, 8KB Flash | NXP
MPN: MC9S08QB8CWL ✗ סוף ייצורMC9S08QB8CWL סקירה
A microcontroller is the central programmable component of an embedded system, combining a CPU core, memory, timers, serial interfaces, and digital I/O on one integrated circuit. The S08 family uses an 8-bit CISC architecture intended for straightforward control logic. Compared with larger 32-bit Cortex-M devices, the MC9S08QB8CWL concentrates basic USB connectivity, timing resources, and general-purpose I/O in a modest 28-pin package while consuming substantially less program memory.
Key device characteristics include 8 KB of Flash for firmware storage, 512 bytes of RAM, a 20 MHz clock capability, 24 I/O lines, and up to 20 GPIO functions according to the NXP product information. The integrated USB device controller reduces the need for a separate USB interface IC, although firmware, transceiver integration, and power-supply requirements still need to be checked against the complete datasheet before a USB design is released.
The S08 architecture also provides multiple timers for periodic measurement, motor control, timing events, or debouncing. Its 2.5 V and 3.3 V operating options fit legacy industrial peripherals, USB-connected test equipment, compact control panels, and accessory controllers where board area and power consumption are more important than high-performance arithmetic. The 28-pin SOIC package is also easier to hand-assemble and inspect than fine-pitch land-grid-array devices.
When laying out a new board, treat USB signal integrity as a dedicated design task. Route D+ and D+ as a short, continuous, impedance-controlled pair, place the required series termination close to the controller, and follow the manufacturer reference layout for decoupling and grounding. Confirm the exact USB clock and transceiver requirements in the MC9S08QB8 datasheet before finalizing the schematic and PCB stack-up.
NXP lists the MC9S08QB8CWL as End of Life. New production designs should therefore account for future sourcing risk and consider an actively supported MCU with a defined migration path. For an existing design, preserve the SOIC footprint, verify every peripheral, port, interrupt vector, and voltage requirement, and validate replacement firmware before production quantities are released.
This page combines lifecycle status, memory and interface specifications, drop-in migration options, package details, and practical replacement guidance into one engineering-focused reference for maintaining or redesigning MC9S08QB8CWL-based equipment.
חלופות תחליף ישיר עבור MC9S08QB8CWL — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MC9S08QB8CWL (אותו גורם צורה וטביעת רגל) — שונים ב Core Architecture, Package, RAM, Maximum CPU Frequency, RoHS Status.
MC9S08QG8CWL
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC9S08QH8CWL
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC9S08QE8CWL
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MC9S08QF8CWL
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC9S08QL8CWL
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MC9S08QB8CWL דירוגים מרביים ומאפיינים חשמליים
| Manufacturer | NXP Semiconductors |
| Product Type | 8-bit microcontroller with integrated USB device controller |
| Core Architecture | S08, 8-bit CISC |
| תדר שעון מקסימלי | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 512 bytes |
| Supply Voltage Options | 2.5 V or 3.3 V |
| מארז | 28-pin SOIC |
| סוג הרכבה | Surface mount |
| USB Interface | Integrated USB device controller |
| I/O Lines | 24 |
| General-Purpose I/O | Up to 20 GPIO |
| Timer Resources | Multiple timers |
| Microcontroller Width | 8-bit |
| סטטוס מחזור חיים | End of Life |
מדריך תצורת פינים של MC9S08QB8CWL 28-pin soic
תצורת פינים עבור MC9S08QB8CWL (מארזת 28-pin soic). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MC9S08QB8CWL.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MC9S08QB8CWL מתאים עבור 6 יישוםs: USB Peripheral Controller, Industrial Data-Acquisition Module, Control Panel and HMI Backplane, USB Connected Test Accessory, Low-Cost Sensor Gateway, Appliance and Accessory Controller.
USB Peripheral Controller
The MC9S08QB8CWL fits compact USB peripheral designs because it combines an 8-bit S08 core with an integrated USB device controller in a 28-pin SOIC package. Its 8 KB of Flash is suitable for enumeration code, command handling, status reporting, and configuration storage, while 512 bytes of RAM supports short protocol buffers and control state. A practical design uses the device as the USB target while a timer or serial interface handles local control functions. The 20 MHz maximum clock provides margin for protocol servicing, but actual USB throughput depends on the endpoint configuration and firmware. Keep the USB data routing compact and validate the required pull-up, termination, clock, and decoupling arrangements against the manufacturer reference design before release.
מומלץ
Industrial Data-Acquisition Module
For a compact acquisition module, the MC9S08QB8CWL can coordinate sensors, digital status inputs, and a host connection while its 24 I/O lines handle discrete monitoring functions. The 8-bit S08 core is appropriate for scaling or formatting moderate volumes of sensor data rather than intensive signal analysis. Multiple timers can establish acquisition intervals, sample timing, watchdog activity, and communication timeouts. Operate the device from 2.5 V or 3.3 V according to the selected peripheral interface levels, and use the 20 MHz clock only when the timing budget requires it. Because the device is End of Life, production equipment should isolate any new expansion behind a documented interface or plan a controller upgrade that preserves the existing external connector and field-bus behavior.
מומלץ
Control Panel and HMI Backplane
The MC9S08QB8CWL can serve as the low-power controller behind a simple control panel, keypad reader, status display, or relay-control board. Its 20 GPIO-capable functions, multiple timers, and 8-bit processing core are adequate for button scanning, indicator control, debouncing, and sequencing. The 512 bytes of RAM favors event-driven firmware that does not retain large display frames or history buffers. Use timers for debounce intervals and periodic display updates instead of blocking delays, which improves responsiveness and lowers overall energy use. The 28-pin SOIC footprint remains practical for hand assembly and repair, but a complete replacement assessment must verify LCD or LED driver requirements, port multiplexing, and any communications peripherals beyond the integrated USB device controller.
מומלץ
USB Connected Test Accessory
A programmable test accessory is a natural application for the MC9S08QB8CWL because USB connectivity, multiple timers, and a general-purpose I/O complement are combined in one controller. The firmware can implement a simple command interpreter, collect switch or sensor states, generate timing signals, and report results to a host computer. The 8 KB Flash limit favors compact command tables and configuration structures rather than storing large test vectors. Keep timing-critical functions on dedicated timers and avoid heavy processing inside USB interrupt service routines. The 20 MHz clock capability allows efficient event handling at this memory level. Before cloning the accessory, reproduce the original USB enumeration sequence, verify pull-up states during reset, and confirm that the replacement candidate preserves every port assignment used by external test points.
מומלץ
Low-Cost Sensor Gateway
The MC9S08QB8CWL can act as a small sensor gateway when the design needs local digital I/O, periodic sampling, and a host-facing USB link rather than high-bandwidth analog processing. Use its multiple timers for sampling intervals and communication timing, and use the 24 I/O lines for discrete sensors, interrupt inputs, and status outputs. The 8-bit architecture keeps firmware and memory requirements modest for compact energy-budgeted products. Since the part is End of Life, new gateway designs should evaluate the availability of the MCU, USB transceiver requirements, and field-upgrade strategy together. A migration to another S08 device is easiest when the PCB is unchanged, but the USB descriptors, timing behavior, and peripheral assignments must be validated under worst-case load conditions.
מומלץ
Appliance and Accessory Controller
Home appliances, printers, laboratory accessories, and communication equipment often need a compact controller that manages a few outputs, senses switch states, and exposes service data to a host. The MC9S08QB8CWL supplies the core processing, 8 KB of program storage, 512 bytes of RAM, multiple timers, and an integrated USB device controller for that role. Its 2.5 V or 3.3 V operation supports both legacy and modern peripheral voltage levels, while the 28-pin SOIC simplifies rework. Design the firmware around interrupt-driven events and timer-based scheduling rather than intensive polling. When sustaining an existing appliance, check the original power-cycling behavior, boot timing, USB descriptors, and brownout margins; these characteristics can differ between same-family candidates even when the land pattern remains unchanged.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MC9S08QB8CWL — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MC9S08QG8CWL | MC9S08QH8CWL | MC9S08QE8CWL | MC9S08QF8CWL | MC9S08QL8CWL |
|---|---|---|---|---|---|---|
| Manufacturer | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 28-pin SOIC | 28-pin SOIC - same footprint class | 28-pin SOIC - same footprint class | 28-pin SOIC - same footprint class | 28-pin SOIC - same footprint class | 28-pin SOIC - same footprint class |
| Core Architecture | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC |
מבדילים עיקריים
- Integrated USB device controller in a compact 8-bit MCU (לעומתMC9S08QE8CWL)
- Higher documented clock capability than the assumed migration band (לעומתMC9S08QH8CWL)
- Documented 8 KB Flash configuration (לעומתMC9S08QF8CWL)
הערות תכנון
Follow the manufacturer reference layout for the USB data pair, series termination, clock components, and decoupling. Route D+ and D- together without stubs or plane transitions, and provide a continuous return path beneath the pair. Because the device also supports legacy 2.5 V and 3.3 V system levels, keep USB and processor-side return currents tightly coupled and separate noisy switching-current paths from the interface area.
Size the supply from the worst-case operating state rather than the nominal 20 MHz clock rate. Include the MCU's active current, timer activity, USB load, external pull-up current, and every I/O load connected to the 3.3 V or 2.5 V rail. Use the datasheet current-versus-frequency and operating-mode graphs, and check regulator headroom at the highest specified temperature to avoid brownout resets during USB enumeration.
Do not approve a migration from the footprint alone. Compare power pins, ground connections, clock pins, reset behavior, USB data pins, port multiplexing, interrupt vectors, and timer channels between the original and candidate datasheets. Preserve the original firmware tool and boot configuration, then test reset, enumeration, brownout recovery, and every external I/O under worst-case loading before releasing replacement quantities.
מידע על תאימות
NXP identifies the MC9S08QB8CWL as End of Life. Detailed RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification statements were not established from the available manufacturer and distributor information.