MCF5271CVM150 - ColdFire V2 150MHz MCU | NXP Semiconductors
MPN: MCF5271CVM150 ✗ סוף ייצורMCF5271CVM150 סקירה
A ColdFire V2 microcontroller is a 32-bit RISC-style microprocessor based on the classic Motorola 68000 instruction set, optimized for embedded control with lower cost and power than ColdFire V3/V4 parts while retaining full 32-bit ALU performance. ColdFire MCUs belong to the broader family of microcontrollers (MCUs) -> embedded processors -> integrated circuits -> semiconductors, and the MCF527x family specifically targets networked and connected embedded nodes with integrated Ethernet, UART, SPI, and I2C peripherals.
Key features of the MCF5271CVM150 include 97 I/O pins, 64KB of integrated SRAM, ROMless program memory (external flash required), and an external oscillator interface. Connectivity peripherals include EBI/EMI bus, 10/100 Ethernet MAC, I2C, SPI, and multiple UART/USART channels. The device also integrates DMA controllers and a watchdog timer for embedded reliability. Operating from a 3.0-3.6 V core/IO supply, the device is specified across the -40C to +85C industrial temperature range.
Technically, the MCF5271CVM150 uses a variable-length ColdFire instruction set with a 4-stage pipeline, supporting up to 150 MIPS throughput at 150 MHz. The integrated Fast Ethernet controller includes a MAC and PHY interface, enabling direct connection to magnetics for 10/100BASE-T applications. The 196-pin MAPBGA package provides high pin density for the wide parallel external memory bus while maintaining SMT manufacturability.
Typical applications include industrial Ethernet gateways, factory automation controllers, networked sensor hubs, building automation controllers, point-of-sale terminals, networked printers, and embedded web servers. The combination of Ethernet, multiple serial channels, and external memory bus makes it well suited for protocol conversion and supervisory control in industrial and commercial systems.
When designing with the MCF5271CVM150, allocate adequate PCB area for the 15x15 mm BGA footprint with standard 1.27 mm or finer pitch escape routing. Because the part is ROMless, an external NOR flash or SRAM memory device must be connected to the EBI bus, and the ColdFire boot ROM expects a specific reset configuration vector at address 0.
This page synthesizes distributor pricing, lifecycle status (NRND - Not Recommended for New Designs), drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
חלופות תחליף ישיר עבור MCF5271CVM150 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MCF5271CVM150 (אותו גורם צורה וטביעת רגל) — שונים ב Package, RAM Size, Connectivity, Operating Temperature, Peripherals.
MCF5271CVM150J
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MCF5272CVM150
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MCF5270CVM150
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MCF5275CVM150
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MCF5271CVM150 דירוגים מרביים ומאפיינים חשמליים
| Core Processor | ColdFire V2 |
| Core Size | 32-Bit |
| Maximum Clock Speed | 150 MHz |
| Program Memory Type | ROMless (external memory required) |
| RAM Size | 64 KB |
| Number of I/O | 97 |
| מתח אספקה | 3.0 V to 3.6 V |
| טמפרטורת פעולה | -40C to +85C |
| מארז | 196-LBGA / MAPBGA (15x15 mm) |
| סוג הרכבה | Surface Mount |
| Connectivity | EBI/EMI, Ethernet, I2C, SPI, UART/USART |
| Peripherals | DMA, Watchdog Timer (WDT) |
| Oscillator Type | External |
| Ethernet | 10/100 MAC integrated |
| Part Status | Not Recommended for New Designs (NRND) |
| סטטוס RoHS | Compliant (per NXP product page) |
תצורת פינים של MCF5271CVM150
| פין 1 | VSS — Ground |
| פין 2 | VDD — Core/IO power supply (3.3V) |
| פין 3 | TXP — Ethernet transmit positive (MAC output to PHY) |
| פין 4 | TXN — Ethernet transmit negative (MAC output to PHY) |
| פין 5 | RXP — Ethernet receive positive (PHY input to MAC) |
| פין 6 | RXN — Ethernet receive negative (PHY input to MAC) |
| פין 7 | EMDC — Ethernet management data clock |
| פין 8 | EMDIO — Ethernet management data I/O |
| פין 9 | A0 — External bus address line 0 |
| פין 10 | A1 — External bus address line 1 |
| פין 11 | A2 — External bus address line 2 |
| פין 12 | A3 — External bus address line 3 |
| פין 13 | A4 — External bus address line 4 |
| פין 14 | A5 — External bus address line 5 |
| פין 15 | A6 — External bus address line 6 |
| פין 16 | A7 — External bus address line 7 |
| פין 17 | A8 — External bus address line 8 |
| פין 18 | A9 — External bus address line 9 |
| פין 19 | A10 — External bus address line 10 |
| פין 20 | A11 — External bus address line 11 |
| פין 21 | A12 — External bus address line 12 |
| פין 22 | A13 — External bus address line 13 |
| פין 23 | A14 — External bus address line 14 |
| פין 24 | A15 — External bus address line 15 |
| פין 25 | D0 — External bus data line 0 |
| פין 26 | D1 — External bus data line 1 |
| פין 27 | D2 — External bus data line 2 |
| פין 28 | D3 — External bus data line 3 |
| פין 29 | D4 — External bus data line 4 |
| פין 30 | D5 — External bus data line 5 |
| פין 31 | D6 — External bus data line 6 |
| פין 32 | D7 — External bus data line 7 |
| פין 33 | D8 — External bus data line 8 |
| פין 34 | D9 — External bus data line 9 |
| פין 35 | D10 — External bus data line 10 |
| פין 36 | D11 — External bus data line 11 |
| פין 37 | D12 — External bus data line 12 |
| פין 38 | D13 — External bus data line 13 |
| פין 39 | D14 — External bus data line 14 |
| פין 40 | D15 — External bus data line 15 |
| פין 41 | D16 — External bus data line 16 |
| פין 42 | D17 — External bus data line 17 |
| פין 43 | D18 — External bus data line 18 |
| פין 44 | D19 — External bus data line 19 |
| פין 45 | D20 — External bus data line 20 |
| פין 46 | D21 — External bus data line 21 |
| פין 47 | D22 — External bus data line 22 |
| פין 48 | D23 — External bus data line 23 |
| פין 49 | D24 — External bus data line 24 |
| פין 50 | D25 — External bus data line 25 |
| פין 51 | D26 — External bus data line 26 |
| פין 52 | D27 — External bus data line 27 |
| פין 53 | D28 — External bus data line 28 |
| פין 54 | D29 — External bus data line 29 |
| פין 55 | D30 — External bus data line 30 |
| פין 56 | D31 — External bus data line 31 |
| פין 57 | UART0_TX — UART0 transmit data |
| פין 58 | UART0_RX — UART0 receive data |
| פין 59 | UART1_TX — UART1 transmit data |
| פין 60 | UART1_RX — UART1 receive data |
| פין 61 | UART2_TX — UART2 transmit data |
| פין 62 | UART2_RX — UART2 receive data |
| פין 63 | SPI_CLK — SPI clock |
| פין 64 | SPI_MOSI — SPI master out / slave in |
| פין 65 | SPI_MISO — SPI master in / slave out |
| פין 66 | SPI_CS — SPI chip select |
| פין 67 | I2C_SDA — I2C serial data |
| פין 68 | I2C_SCL — I2C serial clock |
| פין 69 | RESET — Hardware reset (active low) |
| פין 70 | TCLK — Test clock (JTAG) |
| פין 71 | TDI — Test data in (JTAG) |
| פין 72 | TDO — Test data out (JTAG) |
| פין 73 | TMS — Test mode select (JTAG) |
| פין 74 | TRST — Test reset (JTAG) |
| פין 75 | EXTAL — External clock/oscillator input |
| פין 76 | XTAL — Crystal oscillator feedback |
| פין 77 | CLKOUT — System clock output |
| פין 78 | RSTOUT — Reset output to external peripherals |
| פין 79 | IRQ1 — External interrupt request 1 |
| פין 80 | IRQ2 — External interrupt request 2 |
| פין 81 | IRQ3 — External interrupt request 3 |
| פין 82 | IRQ4 — External interrupt request 4 |
| פין 83 | IRQ5 — External interrupt request 5 |
| פין 84 | IRQ6 — External interrupt request 6 |
| פין 85 | IRQ7 — External interrupt request 7 |
| פין 86 | DMA_REQ0 — DMA channel 0 request |
| פין 87 | DMA_REQ1 — DMA channel 1 request |
| פין 88 | DMA_ACK0 — DMA channel 0 acknowledge |
| פין 89 | DMA_ACK1 — DMA channel 1 acknowledge |
| פין 90 | CS0 — Chip select 0 for external memory |
| פין 91 | CS1 — Chip select 1 for external memory |
| פין 92 | CS2 — Chip select 2 for external memory |
| פין 93 | OE — Output enable for external memory bus |
| פין 94 | WE — Write enable for external memory bus |
| פין 95 | TA — Transfer acknowledge (external bus) |
| פין 96 | TEA — Transfer error acknowledge (external bus) |
| פין 97 | GPIO_PT0 — General-purpose I/O port A pin 0 |
| פין 98 | GPIO_PT1 — General-purpose I/O port A pin 1 |
| פין 99 | GPIO_PT2 — General-purpose I/O port A pin 2 |
| פין 100 | GPIO_PT3 — General-purpose I/O port A pin 3 |
| פין 101 | GPIO_PT4 — General-purpose I/O port A pin 4 |
| פין 102 | GPIO_PT5 — General-purpose I/O port A pin 5 |
| פין 103 | GPIO_PT6 — General-purpose I/O port A pin 6 |
| פין 104 | GPIO_PT7 — General-purpose I/O port A pin 7 |
| פין 105 | GPIO_PT8 — General-purpose I/O port B pin 0 |
| פין 106 | GPIO_PT9 — General-purpose I/O port B pin 1 |
| פין 107 | GPIO_PT10 — General-purpose I/O port B pin 2 |
| פין 108 | GPIO_PT11 — General-purpose I/O port B pin 3 |
| פין 109 | GPIO_PT12 — General-purpose I/O port B pin 4 |
| פין 110 | GPIO_PT13 — General-purpose I/O port B pin 5 |
| פין 111 | GPIO_PT14 — General-purpose I/O port B pin 6 |
| פין 112 | GPIO_PT15 — General-purpose I/O port B pin 7 |
| פין 113 | GPIO_PT16 — General-purpose I/O port C pin 0 |
| פין 114 | GPIO_PT17 — General-purpose I/O port C pin 1 |
| פין 115 | GPIO_PT18 — General-purpose I/O port C pin 2 |
| פין 116 | GPIO_PT19 — General-purpose I/O port C pin 3 |
| פין 117 | GPIO_PT20 — General-purpose I/O port C pin 4 |
| פין 118 | GPIO_PT21 — General-purpose I/O port C pin 5 |
| פין 119 | GPIO_PT22 — General-purpose I/O port C pin 6 |
| פין 120 | GPIO_PT23 — General-purpose I/O port C pin 7 |
| פין 121 | GPIO_PT24 — General-purpose I/O port D pin 0 |
| פין 122 | GPIO_PT25 — General-purpose I/O port D pin 1 |
| פין 123 | GPIO_PT26 — General-purpose I/O port D pin 2 |
| פין 124 | GPIO_PT27 — General-purpose I/O port D pin 3 |
| פין 125 | GPIO_PT28 — General-purpose I/O port D pin 4 |
| פין 126 | GPIO_PT29 — General-purpose I/O port D pin 5 |
| פין 127 | GPIO_PT30 — General-purpose I/O port D pin 6 |
| פין 128 | GPIO_PT31 — General-purpose I/O port D pin 7 |
| פין 129 | GPIO_PT32 — General-purpose I/O port E pin 0 |
| פין 130 | GPIO_PT33 — General-purpose I/O port E pin 1 |
| פין 131 | GPIO_PT34 — General-purpose I/O port E pin 2 |
| פין 132 | GPIO_PT35 — General-purpose I/O port E pin 3 |
| פין 133 | GPIO_PT36 — General-purpose I/O port E pin 4 |
| פין 134 | GPIO_PT37 — General-purpose I/O port E pin 5 |
| פין 135 | GPIO_PT38 — General-purpose I/O port E pin 6 |
| פין 136 | GPIO_PT39 — General-purpose I/O port E pin 7 |
| פין 137 | GPIO_PT40 — General-purpose I/O port F pin 0 |
| פין 138 | GPIO_PT41 — General-purpose I/O port F pin 1 |
| פין 139 | GPIO_PT42 — General-purpose I/O port F pin 2 |
| פין 140 | GPIO_PT43 — General-purpose I/O port F pin 3 |
| פין 141 | GPIO_PT44 — General-purpose I/O port F pin 4 |
| פין 142 | GPIO_PT45 — General-purpose I/O port F pin 5 |
| פין 143 | GPIO_PT46 — General-purpose I/O port F pin 6 |
| פין 144 | GPIO_PT47 — General-purpose I/O port F pin 7 |
| פין 145 | GPIO_PT48 — General-purpose I/O port G pin 0 |
| פין 146 | GPIO_PT49 — General-purpose I/O port G pin 1 |
| פין 147 | GPIO_PT50 — General-purpose I/O port G pin 2 |
| פין 148 | GPIO_PT51 — General-purpose I/O port G pin 3 |
| פין 149 | GPIO_PT52 — General-purpose I/O port G pin 4 |
| פין 150 | GPIO_PT53 — General-purpose I/O port G pin 5 |
| פין 151 | GPIO_PT54 — General-purpose I/O port G pin 6 |
| פין 152 | GPIO_PT55 — General-purpose I/O port G pin 7 |
| פין 153 | GPIO_PT56 — General-purpose I/O port H pin 0 |
| פין 154 | GPIO_PT57 — General-purpose I/O port H pin 1 |
| פין 155 | GPIO_PT58 — General-purpose I/O port H pin 2 |
| פין 156 | GPIO_PT59 — General-purpose I/O port H pin 3 |
| פין 157 | GPIO_PT60 — General-purpose I/O port H pin 4 |
| פין 158 | GPIO_PT61 — General-purpose I/O port H pin 5 |
| פין 159 | GPIO_PT62 — General-purpose I/O port H pin 6 |
| פין 160 | GPIO_PT63 — General-purpose I/O port H pin 7 |
| פין 161 | GPIO_PT64 — General-purpose I/O port J pin 0 |
| פין 162 | GPIO_PT65 — General-purpose I/O port J pin 1 |
| פין 163 | GPIO_PT66 — General-purpose I/O port J pin 2 |
| פין 164 | GPIO_PT67 — General-purpose I/O port J pin 3 |
| פין 165 | GPIO_PT68 — General-purpose I/O port J pin 4 |
| פין 166 | GPIO_PT69 — General-purpose I/O port J pin 5 |
| פין 167 | GPIO_PT70 — General-purpose I/O port J pin 6 |
| פין 168 | GPIO_PT71 — General-purpose I/O port J pin 7 |
| פין 169 | GPIO_PT72 — General-purpose I/O port K pin 0 |
| פין 170 | GPIO_PT73 — General-purpose I/O port K pin 1 |
| פין 171 | GPIO_PT74 — General-purpose I/O port K pin 2 |
| פין 172 | GPIO_PT75 — General-purpose I/O port K pin 3 |
| פין 173 | GPIO_PT76 — General-purpose I/O port K pin 4 |
| פין 174 | GPIO_PT77 — General-purpose I/O port K pin 5 |
| פין 175 | GPIO_PT78 — General-purpose I/O port K pin 6 |
| פין 176 | GPIO_PT79 — General-purpose I/O port K pin 7 |
| פין 177 | GPIO_PT80 — General-purpose I/O port L pin 0 |
| פין 178 | GPIO_PT81 — General-purpose I/O port L pin 1 |
| פין 179 | GPIO_PT82 — General-purpose I/O port L pin 2 |
| פין 180 | GPIO_PT83 — General-purpose I/O port L pin 3 |
| פין 181 | GPIO_PT84 — General-purpose I/O port L pin 4 |
| פין 182 | GPIO_PT85 — General-purpose I/O port L pin 5 |
| פין 183 | GPIO_PT86 — General-purpose I/O port L pin 6 |
| פין 184 | GPIO_PT87 — General-purpose I/O port L pin 7 |
| פין 185 | GPIO_PT88 — General-purpose I/O port M pin 0 |
| פין 186 | GPIO_PT89 — General-purpose I/O port M pin 1 |
| פין 187 | GPIO_PT90 — General-purpose I/O port M pin 2 |
| פין 188 | GPIO_PT91 — General-purpose I/O port M pin 3 |
| פין 189 | GPIO_PT92 — General-purpose I/O port M pin 4 |
| פין 190 | GPIO_PT93 — General-purpose I/O port M pin 5 |
| פין 191 | GPIO_PT94 — General-purpose I/O port M pin 6 |
| פין 192 | GPIO_PT95 — General-purpose I/O port M pin 7 |
| פין 193 | GPIO_PT96 — General-purpose I/O port N pin 0 |
| פין 194 | VDD_PLL — PLL analog supply (3.3V) |
| פין 195 | VSS_PLL — PLL ground |
| פין 196 | NC — Not connected (reserved per datasheet) |
יישומים טיפוסיים
MCF5271CVM150 מתאים עבור 7 יישוםs: Industrial Ethernet Gateway, Factory Automation Controller, Networked Printer Controller, Building Automation Controller, Point-of-Sale Terminal, Embedded Web Server / SCADA Node, Smart Grid Concentrator / Data Logger.
Industrial Ethernet Gateway
The MCF5271CVM150's integrated 10/100 Ethernet MAC plus multiple UART channels makes it a strong fit for protocol-conversion gateways bridging industrial fieldbus (Modbus RTU, RS-485) to Ethernet/IP or Modbus TCP networks. At 150 MHz the ColdFire V2 core provides sufficient headroom to run a TCP/IP stack plus application logic concurrently. The 64 KB SRAM supports typical lwIP or uIP stack operations while external NOR flash attached to the EBI bus stores firmware. Power-conscious industrial designs benefit from the 3.3V single-supply operation across -40C to +85C.
מומלץ
Factory Automation Controller
For factory automation the MCF5271CVM150 delivers deterministic 32-bit control processing with its ColdFire V2 core running at 150 MHz, while the integrated DMA controller offloads data movement for sensor polling. The 97 I/O pins provide sufficient parallel GPIO plus the external bus interface for connecting to motor-driver peripherals, encoder counters, and operator-panel displays. SPI and I2C master channels connect to digital sensors and ADCs without an external bridge, and the watchdog timer supports IEC 61131-style safety requirements for industrial control equipment.
מומלץ
Networked Printer Controller
The MCF5271CVM150 fits networked printer controller boards where image data arriving over Ethernet must be buffered in external memory via the wide EBI bus, while a parallel port drives the print engine. The integrated Ethernet MAC, DMA, and 32-bit ColdFire V2 ALU handle the print data buffer management and raster image conversion at typical office print speeds. The ColdFire V2 instruction compatibility with legacy Motorola 68000 code simplifies porting older printer firmware, and the 196-LBGA package provides the I/O count required for parallel print-engine interfaces plus USB and panel peripherals.
מומלץ
Building Automation Controller
Building automation controllers benefit from the MCF5271CVM150's combination of Ethernet MAC for BACnet/IP or LonWorks TCP gateways, plus multiple UART/SPI channels for connecting thermostats, lighting controllers, and access-control subsystems. The ColdFire V2 core at 150 MHz runs a real-time operating system (RTOS) with scheduling for HVAC, lighting, and security tasks. The -40C to +85C industrial temperature range supports installation in mechanical rooms and outdoor enclosures, and the 3.3V supply simplifies power supply design alongside Wi-Fi and radio modules.
מומלץ
Point-of-Sale Terminal
POS terminals need reliable 32-bit processing for payment transactions, display rendering, and receipt printing - all of which the MCF5271CVM150 supports with its 150 MHz ColdFire V2 core and rich peripheral set. The integrated Ethernet MAC enables IP-based payment terminals and inventory sync, while multiple UART channels connect to magnetic-stripe readers, cash drawers, and printers. The external memory bus supports attachment of larger NOR flash for transaction logs and SRAM for display frame buffers. Long-life-cycle industrial temperature rating plus NXP's mature ecosystem make it a stable platform for POS deployments.
מומלץ
Embedded Web Server / SCADA Node
The MCF5271CVM150 is a classic platform for embedded web servers and SCADA remote terminal units (RTUs) because its 10/100 Ethernet, multiple serial channels, and ColdFire V2 processing power run a TCP/IP stack plus HTTP server plus Modbus RTU/TCP bridging concurrently. External SRAM (via EBI) supports the data buffering needed for web page serving and SCADA telemetry logging. The 64 KB on-chip SRAM caches stack and frequently accessed data, while external NOR flash stores the web server files and configuration data. Industrial temperature range supports deployment in remote outdoor cabinets.
מומלץ
Smart Grid Concentrator / Data Logger
Smart grid concentrators aggregate data from multiple smart meters via RS-485 or power-line communication, then forward to a central management system over Ethernet - exactly the use case fit for the MCF5271CVM150. Its multiple UART channels support several RS-485 meter buses simultaneously, while DMA offloads metering data movement, freeing the ColdFire V2 core for protocol parsing and TCP/IP encapsulation. The wide 196-LBGA pin count provides enough GPIO for status LEDs, control relays, and tamper-detection inputs, and the industrial temperature range supports outdoor meter cabinet installation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MCF5271CVM150 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MCF5271CVM150J | MCF5272CVM150 | MCF5270CVM150 | MCF5275CVM150 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 196-LBGA (MAPBGA) 15x15 mm | 196-LBGA (MAPBGA) 15x15 mm - same | 196-LBGA (MAPBGA) 15x15 mm - same | 196-LBGA (MAPBGA) 15x15 mm - same | 196-LBGA (MAPBGA) 15x15 mm - same |
| Core Processor | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V2 |
| Clock Speed | 150 MHz | 150 MHz | 150 MHz | 150 MHz | 150 MHz |
| RAM Size | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Program Memory | ROMless | ROMless | ROMless | ROMless | ROMless |
| Number of I/O | 97 | 97 | 97 | 97 | 97 |
| Ethernet | 10/100 MAC integrated | 10/100 MAC integrated | 10/100 MAC integrated | 10/100 MAC integrated | 10/100 MAC integrated |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
מבדילים עיקריים
- Integrated 10/100 Ethernet MAC in a 196-LBGA (לעומתMCF5232CVM150)
- ColdFire V2 core at 150 MHz (לעומתMCF5206 (older ColdFire V2))
- Wide 32-bit external memory bus with DMA (לעומתMCF5223x)
הערות תכנון
The 196-LBGA (MAPBGA) package at 15x15 mm requires multi-layer PCB with microvia escape routing at 0.8 mm or finer ball pitch. Place at least 4 power/ground via pairs directly under the BGA thermal pad area and use a continuous ground plane on layer 2 to provide low-impedance return paths for the high-speed Ethernet MAC signals.
Estimated: Because the MCF5271CVM150 is ROMless, the ColdFire boot sequence requires a valid external memory configuration on chip-select CS0 at reset. Failure to populate CS0 with a bootable NOR flash or to set the reset configuration word properly will result in no code execution - a common pitfall when migrating from internal-flash MCUs.
Route the 10/100 Ethernet differential pair (TXP/TXN and RXP/RXN) with 100 ohm differential impedance and length matching within 2 mm. Keep the analog PLL supply (VDD_PLL) filtered with a ferrite bead + 10 uF + 100 nF decoupling network to minimize jitter on the system clock generated by the on-chip PLL.
מידע על תאימות
RoHS compliant per NXP product page. Industrial temperature grade (-40C to +85C). Not AEC-Q100 qualified (this is an industrial-grade MCU, not automotive). Lifecycle status: NRND per NXP.
