Microchip Technology

MCP3302T-BI/ST - 13-Bit Dual SAR ADC | Microchip

MPN: MCP3302T-BI/ST ✓ פעיל
14-TSSOP Package
כמות הזמנה מינימלית: 1 |

MCP3302T-BI/ST סקירה

The Microchip Technology MCP3302T-BI/ST is a 13-bit, two-channel successive-approximation analog-to-digital converter with four analog input options and differential input capability, housed in a 14-pin TSSOP package. It uses the industry-standard SPI serial interface and is designed for low-power, compact data-acquisition systems.

An analog-to-digital converter, or ADC, converts continuously varying analog voltages into numerical values that a microcontroller or other digital controller can process. The MCP3302 belongs to the ADC and data-acquisition hierarchy, where its SAR architecture repeatedly compares the input voltage with a generated reference level. Differential inputs support measurement of voltage differences, while the low-power architecture is useful in battery-powered instrumentation and remote sensing systems.

The MCP3302T-BI/ST provides 13-bit resolution, two conversion channels, and selectable single-ended or differential operation. Its 14-pin TSSOP package supports compact PCB layouts while exposing four analog inputs through the device's multiplexed input architecture. The SPI interface simplifies connection to microcontrollers and reduces the number of signal lines required for transferring converted results.

Because this converter uses SAR conversion, it is suited to applications that need direct, deterministic digitizing of slowly changing or sampled analog signals. The MCP3302 family is positioned for remote data acquisition, battery-powered systems, industrial measurement, and embedded control rather than high-speed waveform capture. Its multiplexing architecture allows several analog sources to share a compact converter footprint.

Typical applications include sensing potentiometer positions, monitoring thermistor or resistive sensor networks, acquiring pressure or flow transducer signals, reading differential sensor outputs, and digitizing control inputs in embedded systems. Differential measurement can improve rejection of common-mode noise when the sensor output is centered around a biased reference voltage.

Designers should follow the manufacturer pin-description table when assigning analog, reference, ground, and SPI connections. Reference and analog decoupling should be placed close to the corresponding pins, and the analog return path should remain separated from noisy digital switching paths. Validate the complete input range, reference voltage, sample timing, and channel-selection sequence against the system acquisition requirements.

This page combines the manufacturer product description, verified distributor listings, package details, replacement guidance, comparison parameters, and practical PCB design considerations to support faster component selection and implementation.

חלופות תחליף ישיר עבור MCP3302T-BI/ST — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MCP3302T-BI/ST (אותו גורם צורה וטביעת רגל) — שונים ב Conversion Architecture, Digital Interface, Input Type.

Microchip Technology
Conversion Architecture: Successive-approximation (SAR)
Digital Interface: SPI serial interface
Input Type: Fully differential

MCP3302T-I/ST

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-TSSOP
0-bit resolution change, 0-channel change, and 0-pin change; ordering-code qualification and temperature details differ

📋 חלופה להתייחסות (לא בקטלוג)

MCP3302-I/ST

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-TSSOP
0-bit resolution change, 0-channel change, and 0-pin change; ordering-code qualification and temperature details differ

📋 חלופה להתייחסות (לא בקטלוג)

MCP3302T-BI/ST דירוגים מרביים ומאפיינים חשמליים

ADC Resolution 13 bit
Number of Conversion Channels 2 channels
Analog Input Configuration 2 or 4 inputs
Conversion Architecture Successive-approximation register (SAR)
Input Type Single-ended and differential inputs
Digital Interface SPI
Package Type 14-TSSOP
מספר פינים 14 pins
סוג הרכבה Surface mount
Power Consumption Low-power operation
Differential Input Supported
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

מדריך תצורת פינים של MCP3302T-BI/ST 14-tssop

תצורת פינים עבור MCP3302T-BI/ST (מארזת 14-tssop). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 14-tssop עבור MCP3302T-BI/ST

אין נתוני פריסת פינים מפורטים עבור MCP3302T-BI/ST.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MCP3302T-BI/ST מתאים עבור 6 יישוםs: Remote Environmental Sensing, Battery-Powered Instrumentation, Industrial Pressure and Flow Measurement, Precision Potentiometer and Resistive Sensing, Embedded Control and Data Logging, Audio and Communication Interface Monitoring.

🧩

Remote Environmental Sensing

The MCP3302T-BI/ST fits remote environmental monitoring when several slowly changing sensor outputs must be digitized through a compact, low-power interface. Its two SAR channels and two or four analog input options allow resistive sensors, thermistors, and similar transducers to share the converter. Differential operation is particularly useful when a sensor is biased around a common reference and ground-coupled noise could affect the result. The 13-bit resolution provides a practical balance between measurement granularity and power consumption. The SPI interface also suits low-power microcontrollers that can power the converter only during scheduled acquisitions. Place the reference and analog bypass capacitors close to the device, route sensor inputs away from digital clock lines, and verify acquisition timing against the sensor settling behavior.

⚡

Battery-Powered Instrumentation

The MCP3302T-BI/ST is appropriate for portable instruments because the Microchip MCP3302 family combines a 13-bit SAR converter with low-power operation in a compact 14-pin TSSOP package. Two conversion channels and selectable single-ended or differential inputs allow a device to measure more than one sensor without adding a second ADC. Differential readings can reduce the effect of common-mode disturbance in field wiring, provided the source impedance and input network are balanced. The SPI serial interface minimizes the number of interconnects to the controlling microcontroller. Power budgeting should include the converter, reference, pull networks, and sensor interfaces because the total demand determines battery life. Use the manufacturer recommended capacitor values and validate input settling before each conversion.

🏭

Industrial Pressure and Flow Measurement

The MCP3302T-BI/ST can digitize pressure, flow, and level transducer outputs in industrial monitoring equipment. Its differential input support is useful when the transducer produces a signal centered on a biased reference rather than a signal referenced directly to ground. With 13-bit resolution and a two-channel SAR architecture, the device can acquire paired or multiplexed measurements while occupying only a 14-pin TSSOP footprint. The SPI interface connects cleanly to industrial embedded controllers, while the SAR architecture fits process variables that change more slowly than high-frequency waveform data. Care is required around long cable runs: place an input filter near the converter, use a stable reference, and keep return currents out of the sensitive input path. Verify the analog input limits and acquisition interval before enabling continuous sampling.

🔧

Precision Potentiometer and Resistive Sensing

The MCP3302T-BI/ST is well suited to potentiometer position sensing and resistive bridges in compact control panels. Its multiplexed two or four input arrangement permits several resistive elements to share one converter, while the 13-bit result supports position resolution without requiring a high-speed ADC. The SPI output can be read directly by a system controller for calibration, limit detection, or display processing. For best measurement stability, the divider should use a defined excitation and reference arrangement, and its settling time should be allowed before conversion. Place the input resistor network close to the analog pins and maintain a continuous ground reference. Differential operation may be used when the sensing network is arranged around a midpoint reference, helping preserve useful signal range and reduce shared disturbance.

🖥️

Embedded Control and Data Logging

The MCP3302T-BI/ST supports embedded control systems that periodically log analog process variables through a microcontroller. The two conversion channels can represent separate sensor groups, and the four-input configuration adds multiplexing flexibility. The 13-bit SAR converter provides deterministic conversion behavior for supervisory data such as temperature, voltage, position, and status. Its SPI interface reduces the connection count compared with a parallel ADC and allows the controller to manage chip selection and data transfer. In data-logging equipment, separate analog and digital grounding practices help prevent converter references from shifting with switching activity. Place analog and digital return currents in their intended paths, bypass the supply close to the device, and specify a logging interval that satisfies both sensor settling requirements and power-consumption targets.

🌐

Audio and Communication Interface Monitoring

The MCP3302T-BI/ST can monitor slow analog control or bias levels in communication and audio interface systems when high-rate waveform sampling is not required. Its differential input capability can capture small changes around a biased signal while the 13-bit resolution provides useful control-resolution detail. The SAR conversion process and SPI interface also fit embedded monitoring loops that periodically check supply, gain-control, or sensor-node conditions. Designers should avoid using this converter as a direct replacement for a high-bandwidth audio ADC; its intended role is supervisory or slow-signal acquisition. Keep sensitive input traces short, maintain a low-impedance reference, and isolate the converter from switching regulators and fast digital edges. Confirm the device's operating limits and acquisition timing in the manufacturer datasheet.

What are the key specifications of MCP3302T-BI/ST that engineers should know?
The MCP3302T-BI/ST is a 13-bit, two-channel SAR analog-to-digital converter with two or four analog inputs, single-ended and differential input capability, an SPI interface, and a 14-pin TSSOP package. According to the Microchip Technology MCP3302 product page, the converter combines full differential inputs with low-power operation for battery-powered systems and remote data acquisition.
What type of ADC is the MCP3302T-BI/ST?
The MCP3302T-BI/ST is a 13-bit successive-approximation-register analog-to-digital converter. Its SAR architecture supports two conversion channels and single-ended or differential measurements. The Microchip Technology MCP3302 family description identifies an industry-standard SPI serial interface and low-power operation suitable for battery-powered and remote data-acquisition equipment.
Where can I download the MCP3302T-BI/ST datasheet PDF?
The official MCP3302 datasheet is available through the Microchip Technology MCP3302 product page at https://www.microchip.com/en-us/product/MCP3302. Use the document link on that page for the complete electrical characteristics, pin descriptions, interface timing, and typical application diagrams for the MCP3302 family.
Where can I find the MCP3302T-BI/ST pinout?
The MCP3302T-BI/ST pinout is shown in the Microchip Technology MCP3302 datasheet, where the 14-pin TSSOP connection diagram identifies the analog inputs, reference pins, supply pins, ground pins, and SPI signals. Use the pin-description table when assigning PCB tracks because the T ordering code indicates the 14-pin TSSOP package.
How many bits and channels does the MCP3302T-BI/ST have?
The MCP3302T-BI/ST provides 13-bit resolution and two conversion channels. The verified product listing describes it as a 13-bit ADC with two channels, two or four input options, SAR conversion, and a 14-TSSOP package. This combination supports compact multichannel instrumentation without requiring a separate converter for every analog source.
Does the MCP3302T-BI/ST support differential input measurement?
Yes. The MCP3302T-BI/ST supports differential as well as single-ended analog inputs. Microchip describes the MCP3302 family as having full differential inputs, while the distributor product listing identifies differential input capability. Differential operation is useful for measuring a sensor output relative to a biased reference and reducing sensitivity to shared ground noise.
What interface connects the MCP3302T-BI/ST to a microcontroller?
The MCP3302T-BI/ST uses an SPI serial interface. The Microchip Technology product page identifies SPI as the industry-standard interface for the MCP3302 family. This interface transfers conversion commands and results over a compact signal set and is suitable for embedded controllers with compatible SPI peripherals.
Where can I buy MCP3302T-BI/ST online?
Use the Request a Quote form on this page to request MCP3302T-BI/ST availability, commercial terms, and current lead time. The manufacturer product page and verified distributor search results confirm that this exact 13-bit, 14-TSSOP ordering code is commercially available. Request a quote for the quantity and packaging configuration required for your production build.
What is the price of MCP3302T-BI/ST?
Current commercial terms for MCP3302T-BI/ST are generated through the Request a Quote form on this page. The quote should reflect your required quantity, packaging, delivery location, and target schedule. This avoids publishing a stale price figure while still allowing procurement to obtain a binding offer for the exact ordering code.
What is the lead time for MCP3302T-BI/ST?
Request the current MCP3302T-BI/ST lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package shipment configuration, and current inventory status. Include your production schedule and required delivery date so procurement can confirm the most useful availability response.
Is MCP3302T-BI/ST in stock?
Availability for MCP3302T-BI/ST should be confirmed through the Request a Quote form on this page. The verified distributor results identify the exact part as offered for ordering, but live stock can change quickly. Submit the required quantity and packaging preference to receive a current availability and lead-time response.
MCP3302T-BI/ST vs MCP3302T-I/ST - which is better for an industrial design?
Choose MCP3302T-BI/ST when the acquisition system requires its industrial-oriented ordering configuration; choose MCP3302T-I/ST when the standard -I ordering code matches the required qualification and temperature arrangement. Both use the 13-bit, two-channel MCP3302 architecture and the same 14-pin TSSOP footprint. Confirm the ordering-code temperature limits in the Microchip datasheet before production release.
What is the difference between MCP3302T-BI/ST and MCP3302-I/ST?
Both devices belong to the 13-bit, two-channel MCP3302 family and use a 14-pin TSSOP package. The functional conversion resolution, channel count, differential-input capability, and SPI interface remain the same, so their key difference is the ordering-code qualification and temperature details rather than conversion architecture. Confirm those details against the manufacturer ordering information for the required production environment.
When should I choose MCP3302T-BI/ST over another 13-bit ADC?
Choose MCP3302T-BI/ST when the design needs two SAR conversion channels, single-ended or differential measurement, four multiplexed input options, SPI communication, and a compact 14-pin TSSOP footprint. It is particularly suitable for low-power remote acquisition and embedded sensing. Select another ADC when the application requires a different package, higher conversion rate, greater channel count, or a non-SPI interface.
Is MCP3302T-BI/ST suitable for battery-powered data acquisition?
Yes, MCP3302T-BI/ST is suitable for battery-powered and remote data-acquisition systems when its configured operating range meets the application requirements. The Microchip Technology MCP3302 product page identifies low-power consumption and a compact package as core benefits. Validate supply voltage, quiescent behavior, and conversion timing against the battery budget using the manufacturer datasheet.
What can replace MCP3302T-BI/ST, and is there a verified cross-brand equivalent?
The closest same-family replacements are MCP3302T-I/ST and MCP3302-I/ST because each retains the 13-bit, two-channel SAR converter in the same 14-pin TSSOP package. Their ordering-code qualification and temperature details should be checked before substitution. A verified pin-compatible cross-brand replacement was not identified, so do not assume that another manufacturer's ADC can replace this device without a complete pin, interface, timing, and performance review.

נתוני עזר הנדסיים עבור MCP3302T-BI/ST — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MCP3302T-BI/ST for compact, low-power systems that need a 13-bit, two-channel SAR ADC with single-ended or differential inputs, two or four analog input options, and an SPI interface. It is a practical fit for remote sensing, battery-operated instruments, industrial process monitoring, and embedded data logging. Choose MCP3302T-I/ST when the standard -I ordering configuration satisfies the required temperature and qualification conditions while retaining the same conversion performance and 14-pin TSSOP footprint. Choose MCP3302-I/ST for the non-T family ordering configuration after checking its qualification details against the system requirements. Because both alternatives preserve resolution, channel count, architecture, and package, ordering-code qualification is the decisive factor. Select a different ADC when the design needs a higher sample rate, greater channel count, another package, or a non-SPI interface.

השוואה עם חלופות

פרמטר מוצר זה MCP3302T-I/ST MCP3302-I/ST
Package 14-TSSOP 14-TSSOP 14-TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology
ADC Resolution 13 bit 13 bit 13 bit
Conversion Channels 2 channels 2 channels 2 channels
Analog Input Options 2 or 4 inputs 2 or 4 inputs 2 or 4 inputs
Conversion Architecture SAR SAR SAR
Input Configuration Single-ended and differential inputs Single-ended and differential inputs Single-ended and differential inputs
Digital Interface SPI SPI SPI
Power Class Low-power operation Low-power operation Low-power operation

מבדילים עיקריים

  • Two-channel conversion in a compact TSSOP footprint (לעומתMCP3302T-I/ST)
  • Four-input multiplexing with differential support (לעומתMCP3302-I/ST)
  • Industry-standard SPI interface (לעומתMCP3302T-I/ST)

הערות תכנון

Place the input bypass capacitor, reference bypass capacitor, and supply decoupling capacitor close to their corresponding MCP3302T-BI/ST pins. Keep analog input traces short and route them away from SPI clock, chip-select, and switching-supply nodes. Use the manufacturer pin-description and layout guidance to preserve a low-impedance analog return path and minimize coupling into the differential measurement.

Verify that each source impedance satisfies the MCP3302 acquisition requirements before selecting the sampling interval. Allow adequate settling time after changing channels or enabling the converter, especially for high-impedance sensors. Differential inputs should use a balanced source network so common-mode disturbance is rejected rather than converted into an apparent signal difference.

Do not substitute an ADC based only on resolution and channel count. The replacement must also preserve the 14-pin TSSOP pinout, analog input arrangement, reference requirements, SPI mode and timing, supply levels, and acquisition sequence. Confirm that the MCP3302 ordering-code temperature and qualification requirements fit the target environment before releasing a replacement to production.

Calculate the complete acquisition-path power budget, including the ADC, reference source, pull networks, interface controller, and sensors. In a battery-powered system, use the conversion interval and power-saving strategy to control average consumption. Confirm that reference startup, supply ramp, and conversion readiness satisfy the controller's acquisition sequence.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 qualification statement was identified for the exact ordering code. AEC-Q100 is not applicable because this product is an analog-to-digital converter rather than an automotive-qualified device.

חיפושים קשורים

MCP3302T-BI/ST datasheet MCP3302T-BI/ST pinout MCP3302T-BI/ST datasheet pdf MCP3302T-BI/ST specifications MCP3302T-BI/ST equivalent MCP3302T-BI/ST replacement MCP3302T-BI/ST cross reference MCP3302T-BI/ST vs MCP3302T-I/ST MCP3302T-BI/ST 14-TSSOP MCP3302T-BI/ST application circuit Microchip MCP3302T-BI/ST MCP3302T-BI/ST price MCP3302T-BI/ST stock

רכיבים ומונחים קשורים

Microchip Technology MCP3302T-BI/ST MCP3302T-I/ST MCP3302-I/ST Analog-to-digital converter ADC successive-approximation register SAR 13-bit resolution two-channel ADC differential input single-ended input SPI interface 14-TSSOP TSSOP package family surface-mount package SMD low-power data acquisition battery-powered instrumentation remote sensing industrial process monitoring embedded control multiplexed analog input reference voltage common-mode rejection
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר