MCP3302T-BI/ST - 13-Bit Dual SAR ADC | Microchip
MPN: MCP3302T-BI/ST ✓ Hoạt độngMCP3302T-BI/ST Tóm tắt
An analog-to-digital converter, or ADC, converts continuously varying analog voltages into numerical values that a microcontroller or other digital controller can process. The MCP3302 belongs to the ADC and data-acquisition hierarchy, where its SAR architecture repeatedly compares the input voltage with a generated reference level. Differential inputs support measurement of voltage differences, while the low-power architecture is useful in battery-powered instrumentation and remote sensing systems.
The MCP3302T-BI/ST provides 13-bit resolution, two conversion channels, and selectable single-ended or differential operation. Its 14-pin TSSOP package supports compact PCB layouts while exposing four analog inputs through the device's multiplexed input architecture. The SPI interface simplifies connection to microcontrollers and reduces the number of signal lines required for transferring converted results.
Because this converter uses SAR conversion, it is suited to applications that need direct, deterministic digitizing of slowly changing or sampled analog signals. The MCP3302 family is positioned for remote data acquisition, battery-powered systems, industrial measurement, and embedded control rather than high-speed waveform capture. Its multiplexing architecture allows several analog sources to share a compact converter footprint.
Typical applications include sensing potentiometer positions, monitoring thermistor or resistive sensor networks, acquiring pressure or flow transducer signals, reading differential sensor outputs, and digitizing control inputs in embedded systems. Differential measurement can improve rejection of common-mode noise when the sensor output is centered around a biased reference voltage.
Designers should follow the manufacturer pin-description table when assigning analog, reference, ground, and SPI connections. Reference and analog decoupling should be placed close to the corresponding pins, and the analog return path should remain separated from noisy digital switching paths. Validate the complete input range, reference voltage, sample timing, and channel-selection sequence against the system acquisition requirements.
This page combines the manufacturer product description, verified distributor listings, package details, replacement guidance, comparison parameters, and practical PCB design considerations to support faster component selection and implementation.
Bộ thay thế dễ dàng lắp đặt cho MCP3302T-BI/ST — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP3302T-BI/ST (cùng hình factor và footprint) — khác nhau ở Conversion Architecture, Digital Interface, Input Type.
MCP3302T-I/ST
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCP3302-I/ST
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCP3302T-BI/ST Tỷ lệ tối đa & tính chất điện
| ADC Resolution | 13 bit |
| Number of Conversion Channels | 2 channels |
| Analog Input Configuration | 2 or 4 inputs |
| Conversion Architecture | Successive-approximation register (SAR) |
| Input Type | Single-ended and differential inputs |
| Digital Interface | SPI |
| Package Type | 14-TSSOP |
| Số chân | 14 pins |
| Kiểu lắp đặt | Surface mount |
| Power Consumption | Low-power operation |
| Differential Input | Supported |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân MCP3302T-BI/ST 14-tssop
Cấu hình chân cho MCP3302T-BI/ST (14-tssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho MCP3302T-BI/ST.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MCP3302T-BI/ST phù hợp cho 6 Áp dụngs: Remote Environmental Sensing, Battery-Powered Instrumentation, Industrial Pressure and Flow Measurement, Precision Potentiometer and Resistive Sensing, Embedded Control and Data Logging, Audio and Communication Interface Monitoring.
Remote Environmental Sensing
The MCP3302T-BI/ST fits remote environmental monitoring when several slowly changing sensor outputs must be digitized through a compact, low-power interface. Its two SAR channels and two or four analog input options allow resistive sensors, thermistors, and similar transducers to share the converter. Differential operation is particularly useful when a sensor is biased around a common reference and ground-coupled noise could affect the result. The 13-bit resolution provides a practical balance between measurement granularity and power consumption. The SPI interface also suits low-power microcontrollers that can power the converter only during scheduled acquisitions. Place the reference and analog bypass capacitors close to the device, route sensor inputs away from digital clock lines, and verify acquisition timing against the sensor settling behavior.
Được đề xuất
Battery-Powered Instrumentation
The MCP3302T-BI/ST is appropriate for portable instruments because the Microchip MCP3302 family combines a 13-bit SAR converter with low-power operation in a compact 14-pin TSSOP package. Two conversion channels and selectable single-ended or differential inputs allow a device to measure more than one sensor without adding a second ADC. Differential readings can reduce the effect of common-mode disturbance in field wiring, provided the source impedance and input network are balanced. The SPI serial interface minimizes the number of interconnects to the controlling microcontroller. Power budgeting should include the converter, reference, pull networks, and sensor interfaces because the total demand determines battery life. Use the manufacturer recommended capacitor values and validate input settling before each conversion.
Được đề xuất
Industrial Pressure and Flow Measurement
The MCP3302T-BI/ST can digitize pressure, flow, and level transducer outputs in industrial monitoring equipment. Its differential input support is useful when the transducer produces a signal centered on a biased reference rather than a signal referenced directly to ground. With 13-bit resolution and a two-channel SAR architecture, the device can acquire paired or multiplexed measurements while occupying only a 14-pin TSSOP footprint. The SPI interface connects cleanly to industrial embedded controllers, while the SAR architecture fits process variables that change more slowly than high-frequency waveform data. Care is required around long cable runs: place an input filter near the converter, use a stable reference, and keep return currents out of the sensitive input path. Verify the analog input limits and acquisition interval before enabling continuous sampling.
Được đề xuất
Precision Potentiometer and Resistive Sensing
The MCP3302T-BI/ST is well suited to potentiometer position sensing and resistive bridges in compact control panels. Its multiplexed two or four input arrangement permits several resistive elements to share one converter, while the 13-bit result supports position resolution without requiring a high-speed ADC. The SPI output can be read directly by a system controller for calibration, limit detection, or display processing. For best measurement stability, the divider should use a defined excitation and reference arrangement, and its settling time should be allowed before conversion. Place the input resistor network close to the analog pins and maintain a continuous ground reference. Differential operation may be used when the sensing network is arranged around a midpoint reference, helping preserve useful signal range and reduce shared disturbance.
Được đề xuất
Embedded Control and Data Logging
The MCP3302T-BI/ST supports embedded control systems that periodically log analog process variables through a microcontroller. The two conversion channels can represent separate sensor groups, and the four-input configuration adds multiplexing flexibility. The 13-bit SAR converter provides deterministic conversion behavior for supervisory data such as temperature, voltage, position, and status. Its SPI interface reduces the connection count compared with a parallel ADC and allows the controller to manage chip selection and data transfer. In data-logging equipment, separate analog and digital grounding practices help prevent converter references from shifting with switching activity. Place analog and digital return currents in their intended paths, bypass the supply close to the device, and specify a logging interval that satisfies both sensor settling requirements and power-consumption targets.
Được đề xuất
Audio and Communication Interface Monitoring
The MCP3302T-BI/ST can monitor slow analog control or bias levels in communication and audio interface systems when high-rate waveform sampling is not required. Its differential input capability can capture small changes around a biased signal while the 13-bit resolution provides useful control-resolution detail. The SAR conversion process and SPI interface also fit embedded monitoring loops that periodically check supply, gain-control, or sensor-node conditions. Designers should avoid using this converter as a direct replacement for a high-bandwidth audio ADC; its intended role is supervisory or slow-signal acquisition. Keep sensitive input traces short, maintain a low-impedance reference, and isolate the converter from switching regulators and fast digital edges. Confirm the device's operating limits and acquisition timing in the manufacturer datasheet.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MCP3302T-BI/ST — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MCP3302T-I/ST | MCP3302-I/ST |
|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Resolution | 13 bit | 13 bit | 13 bit |
| Conversion Channels | 2 channels | 2 channels | 2 channels |
| Analog Input Options | 2 or 4 inputs | 2 or 4 inputs | 2 or 4 inputs |
| Conversion Architecture | SAR | SAR | SAR |
| Input Configuration | Single-ended and differential inputs | Single-ended and differential inputs | Single-ended and differential inputs |
| Digital Interface | SPI | SPI | SPI |
| Power Class | Low-power operation | Low-power operation | Low-power operation |
Bảo phân biệt quan trọng
- Two-channel conversion in a compact TSSOP footprint (vsMCP3302T-I/ST)
- Four-input multiplexing with differential support (vsMCP3302-I/ST)
- Industry-standard SPI interface (vsMCP3302T-I/ST)
Ghi chú thiết kế
Place the input bypass capacitor, reference bypass capacitor, and supply decoupling capacitor close to their corresponding MCP3302T-BI/ST pins. Keep analog input traces short and route them away from SPI clock, chip-select, and switching-supply nodes. Use the manufacturer pin-description and layout guidance to preserve a low-impedance analog return path and minimize coupling into the differential measurement.
Verify that each source impedance satisfies the MCP3302 acquisition requirements before selecting the sampling interval. Allow adequate settling time after changing channels or enabling the converter, especially for high-impedance sensors. Differential inputs should use a balanced source network so common-mode disturbance is rejected rather than converted into an apparent signal difference.
Do not substitute an ADC based only on resolution and channel count. The replacement must also preserve the 14-pin TSSOP pinout, analog input arrangement, reference requirements, SPI mode and timing, supply levels, and acquisition sequence. Confirm that the MCP3302 ordering-code temperature and qualification requirements fit the target environment before releasing a replacement to production.
Calculate the complete acquisition-path power budget, including the ADC, reference source, pull networks, interface controller, and sensors. In a battery-powered system, use the conversion interval and power-saving strategy to control average consumption. Confirm that reference startup, supply ramp, and conversion readiness satisfy the controller's acquisition sequence.
Thông tin tuân thủ
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 qualification statement was identified for the exact ordering code. AEC-Q100 is not applicable because this product is an analog-to-digital converter rather than an automotive-qualified device.