Microchip Technology

MCP603T-I/SN - 2.8MHz Low-Power R-R Op Amp | Microchip

MPN: MCP603T-I/SN ✓ פעיל
2.7 V to 6.0 V Vdss 230 µA Id 8-pin SOIC Package
כמות הזמנה מינימלית: 1 |

MCP603T-I/SN סקירה

The Microchip Technology MCP603T-I/SN is a single-circuit, general-purpose CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, typical operating current of 230 µA, and typical offset voltage below 2 mV. Designed for 2.7 V to 6.0 V single-supply operation, the device is packaged in an 8-pin SOIC and supports an industrial temperature range of -40°C to +85°C.

An operational amplifier, or op amp, is a voltage-gain element that compares its two input terminals and drives its output toward a higher voltage when the noninverting input exceeds the inverting input. The MCP603 belongs to the CMOS operational-amplifier hierarchy, combining low power consumption and rail-to-rail output capability in a compact analog signal-conditioning package.

The MCP603T-I/SN provides a 2.8 MHz gain-bandwidth product for moderate-frequency amplification and active filtering. Its typical operating current of 230 µA reduces the supply burden in battery-operated equipment, while offset voltage below 2 mV supports accurate signal conditioning around a defined common-mode level. A listed slew rate of 4.5 V/µs provides useful response for low-frequency control, sensing, and buffering applications.

Microchip's advanced CMOS implementation supports low bias current and low operating power, making the amplifier suitable for portable and low-energy systems. The MCP603 can be configured for noninverting, inverting, summing, filtering, and voltage-following circuits. Designers must still account for output-drive capability, input common-mode range, noise, stability, and the limits of a single low-voltage supply when selecting external resistors and capacitors.

Typical uses include sensor-signal conditioning, portable instrumentation, low-power data acquisition, industrial control interfaces, analog sensor buffers, and general-purpose voltage amplification. In each case, the 2.8 MHz bandwidth and 230 µA typical operating current provide a useful balance between signal speed and energy use, while the SOIC-8 package supports conventional surface-mount assembly.

The most important design consideration is power-supply decoupling. Place the required input and output bypass capacitors close to the device pins, keep feedback loops compact, and confirm that source and load impedances remain compatible with stable closed-loop operation. Review the manufacturer's pin description and recommended application circuit before finalizing PCB routing.

This product page combines the manufacturer specifications with practical selection guidance, package details, sourcing instructions, and a qualified drop-in comparison. It supports faster engineering decisions by separating confirmed electrical characteristics from application-specific design requirements.

חלופות תחליף ישיר עבור MCP603T-I/SN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MCP603T-I/SN (אותו גורם צורה וטביעת רגל) — שונים ב Output Swing, Slew Rate.

Microchip Technology
Output Swing: Rail-to-rail
Slew Rate: 2.3 V/µs

MCP603-I/SN

✅ Drop-In
Microchip Technology
📦 8-pin SOIC
Single general-purpose operational amplifier · 1 circuit · CMOS · 2.7 V · 6.0 V · 2.8 MHz · 2.3 V/µs · <325 µA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP603T-I/SN דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Single general-purpose operational amplifier
Circuit Count 1 circuit
Technology CMOS
Supply Voltage Range 2.7 V to 6.0 V
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 µA
Input Offset Voltage Less than 2 mV typical
Slew Rate 4.5 V/µs
Input Bias Current 20 pA
Output Swing Rail-to-rail output
טווח טמפרטורת פעולה -40°C to +85°C
מארז 8-pin SOIC
סוג הרכבה Surface mount
מספר פינים 8 pins

מדריך תצורת פינים של MCP603T-I/SN 8-pin soic

תצורת פינים עבור MCP603T-I/SN (מארזת 8-pin soic). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin soic עבור MCP603T-I/SN

אין נתוני פריסת פינים מפורטים עבור MCP603T-I/SN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MCP603T-I/SN מתאים עבור 6 יישוםs: Portable Sensor Signal Conditioning, Industrial Low-Voltage Control Signals, Low-Power Data Acquisition, Active Filtering and Signal Conditioning, Battery-Powered Monitoring Equipment, General-Purpose Analog Buffering.

📱

Portable Sensor Signal Conditioning

The MCP603T-I/SN fits low-power sensor interfaces that require modest bandwidth and low supply demand. Its 230 µA typical operating current limits amplifier overhead in battery-operated equipment, while the 2.8 MHz gain-bandwidth product is suitable for sensors whose useful bandwidth is well below the amplifier limit. Place the device in a noninverting or inverting conditioning stage and verify that the sensor output remains inside the allowable common-mode range. The rail-to-rail output also helps preserve signal swing on a 3.3 V or 5 V rail, although output-current capability and load stability remain important design checks.

🏭

Industrial Low-Voltage Control Signals

The MCP603T-I/SN is appropriate for buffering and scaling industrial control signals that operate from 2.7 V to 6.0 V. Its industrial temperature option covers -40°C to +85°C, and its 2.8 MHz gain-bandwidth product is more than adequate for common slow analog control loops. The amplifier can drive a downstream converter input or serve as an active filter, but its output-current limit and load stability must be checked against the selected network. Keep feedback traces short and connect bypass capacitors near the supply pins to reduce coupling from switching equipment sharing the enclosure.

🖥️

Low-Power Data Acquisition

The MCP603T-I/SN can provide the analog gain and buffering stage in a compact data-acquisition channel. A 2.8 MHz gain-bandwidth product supports signals extending well beyond conventional slow sensor bandwidth, while the 230 µA typical operating current helps maintain low power when several channels are active. Use the amplifier ahead of an ADC when source impedance requires buffering, and confirm that ADC acquisition timing remains compatible with the amplifier settling behavior. Decouple the 2.7 V to 6.0 V supply locally and use the manufacturer pin table to assign inputs, output, and feedback components correctly.

🔧

Active Filtering and Signal Conditioning

The MCP603T-I/SN is suitable for first-order or moderate-order active filters when low operating power is important. Its 2.8 MHz gain-bandwidth product provides useful closed-loop bandwidth for filters handling low-frequency sensor, audio-control, or measurement signals. Component tolerances and the amplifier's offset below 2 mV typical directly influence DC accuracy, so precision resistors and suitable capacitors may be needed. Confirm stability with the actual source and load impedances, because the recommended compensation values depend on the selected closed-loop gain and operating frequency.

⚡

Battery-Powered Monitoring Equipment

The MCP603T-I/SN supports compact monitoring equipment where every milliamp of continuous current affects battery life. Its 230 µA typical operating current and low-voltage CMOS design are useful for always-on analog paths, while the 4.5 V/µs slew rate permits reasonably fast signal transitions. The amplifier should operate within its 2.7 V minimum supply and away from rail limits that would reduce output swing. Evaluate leakage from the surrounding circuit, disable unneeded channels where possible, and use shutdown or a series switch if the application requires a deeper sleep mode than the amplifier itself provides.

🔧

General-Purpose Analog Buffering

The MCP603T-I/SN works as a voltage follower or unity-gain buffer when a high-impedance source must drive a lower-impedance downstream stage. The rail-to-rail output is advantageous at low supply voltages, and the 230 µA typical operating current avoids making the buffer the dominant system load. Check the capacitive load presented by the following stage and avoid configurations that exceed the amplifier's stability requirements. A short, direct layout from the output to the inverting input is important, while the output should be isolated from sensitive high-impedance nodes to prevent capacitive feedback.

סיכום מוצרים מומלצים

MCP603-I/SN Microchip Technology בשימוש ב-: Portable Sensor Signal Conditioning, Industrial Low-Voltage Control Signals, Low-Power Data Acquisition, Active Filtering and Signal Conditioning, Battery-Powered Monitoring Equipment, General-Purpose Analog Buffering MCP603T-I/CH Same-family single-amplifier option in a smaller package בשימוש ב-: Portable Sensor Signal Conditioning, Industrial Low-Voltage Control Signals, Low-Power Data Acquisition, Active Filtering and Signal Conditioning, Battery-Powered Monitoring Equipment, General-Purpose Analog Buffering
What is the operating voltage of MCP603T-I/SN?
The MCP603T-I/SN operates from 2.7 V to 6.0 V using a single supply. According to the Microchip manufacturer datasheet for the MCP603 family, this range supports low-voltage analog systems while providing enough headroom for common 3.3 V and 5 V rails. Designers should verify the output swing and common-mode limits for the selected feedback configuration at the actual supply voltage.
What are the key specifications of MCP603T-I/SN that engineers should know?
The MCP603T-I/SN combines a 2.8 MHz gain-bandwidth product, 230 µA typical operating current, offset voltage below 2 mV typical, and a 4.5 V/µs slew rate. According to the Microchip manufacturer datasheet, the amplifier uses CMOS technology, operates from 2.7 V to 6.0 V, and is offered in an 8-pin SOIC package. Its rail-to-rail output is particularly useful for low-voltage signal conditioning.
Where to buy MCP603T-I/SN online?
Use the Request a Quote form on this page to request MCP603T-I/SN availability, quantity pricing, and delivery information. The form allows buyers to specify the required quantity and packaging without relying on a static quotation. The requested part should be identified by the complete MPN MCP603T-I/SN so that the 8-pin SOIC industrial-temperature configuration is quoted correctly.
What is the price of MCP603T-I/SN?
The current unit price and volume tiers for MCP603T-I/SN are presented through the Request a Quote form on this page. Pricing can change with quantity, inventory, and market conditions, so request a quotation for the exact MPN and purchase quantity. Engineers should also confirm the orderable package, tape-and-reel quantity, and expected lead time with the supplier.
What is the lead time for MCP603T-I/SN?
Request the current MCP603T-I/SN lead time and minimum order quantity through the Request a Quote form on this page. Lead time can depend on order volume, factory availability, and packaging requirements. Providing your forecast quantities and target delivery date in the request allows the supplier to confirm the most relevant schedule and shipment details.
Is MCP603T-I/SN in stock?
Current MCP603T-I/SN stock status should be confirmed through the Request a Quote form on this page. The form is the appropriate route for checking quantity availability and delivery timing without publishing a potentially stale inventory statement. Include your required order quantity, reel quantity, and target date so the supplier can respond with an actionable availability commitment.
MCP603T-I/SN vs MCP603-I/SN: which one is better?
Both MCP603T-I/SN and MCP603-I/SN use an 8-pin SOIC package and belong to the same MCP603 family with a 2.8 MHz gain-bandwidth product. The key ordering distinction is the temperature-grade suffix. According to Microchip product naming information, MCP603T-I/SN is the industrial-temperature version; consult the manufacturer ordering guide to confirm the exact temperature and qualification requirements for MCP603-I/SN before substitution.
Can MCP603-I/SN replace MCP603T-I/SN?
MCP603-I/SN can serve as a same-package replacement when its temperature rating and electrical limits satisfy the target design. The MCP603-I/SN is listed in an 8-pin SOIC package, matching the MCP603T-I/SN footprint, while the published MCP603 family gain-bandwidth product is 2.8 MHz. The replacement should still undergo a complete review of temperature grade, offset, supply range, and production requirements.
When should I choose MCP603T-I/SN over MCP603-I/SN?
Choose MCP603T-I/SN when the circuit requires the clearly identified industrial-temperature ordering option, particularly in equipment expected to operate from -40°C to +85°C. Both parts are offered in the 8-pin SOIC package, so the decision is primarily a temperature-grade and ordering-control issue. Review the manufacturer ordering table before deciding that the two MPNs are interchangeable for production.
Is MCP603T-I/SN suitable for battery-powered sensor interfaces?
The MCP603T-I/SN is suitable for many battery-powered sensor interfaces because its typical operating current is only 230 µA and its supply range is 2.7 V to 6.0 V. Its 2.8 MHz gain-bandwidth product also supports moderate-frequency amplification. The sensor output range, quiescent-current budget, leakage, settling time, and output drive must still be evaluated before finalizing the circuit.
What is the best drop-in replacement for MCP603T-I/SN?
MCP603-I/SN is the confirmed same-package candidate in the available Microchip family listings, using an 8-pin SOIC and sharing the 2.8 MHz gain-bandwidth product. A broader set of defensible drop-in options was not established by the available cross-reference results, so unverified competitors were not added. Confirm temperature grade, offset voltage, supply limits, and production status before approving MCP603-I/SN as a substitute.
What is the best Microchip equivalent for MCP603T-I/SN?
MCP603-I/SN is the closest documented Microchip alternative because it is listed as an 8-pin SOIC single-circuit amplifier and is identified as directly replaceable in a published comparison. The two ordering codes use the same MCP603 family and 2.8 MHz gain-bandwidth product. Engineers should still validate the temperature grade and every worst-case electrical limit against the original design.
Where can I download the MCP603T-I/SN datasheet PDF?
The MCP603 family documentation is available through the official Microchip product page linked in the datasheet field on this page. The document covers the MCP603 electrical characteristics, pin descriptions, typical application circuits, and ordering information. Use the manufacturer document corresponding to the MCP603 family, and verify the revision date when incorporating its limits into a released design.
Where is the MCP603T-I/SN pinout?
The MCP603T-I/SN pinout is shown in the Microchip manufacturer datasheet under the MCP603 pin description section. The device uses an 8-pin SOIC package, but individual terminal assignments should be taken directly from the package drawing rather than inferred from another amplifier. Use that pin table when assigning supply, ground, input, output, and feedback connections on the PCB.
How should MCP603T-I/SN be decoupled on a PCB?
Place the datasheet-recommended bypass capacitors immediately beside the MCP603T-I/SN supply and ground pins, and keep the feedback and compensation components close to the amplifier. According to the Microchip application guidance, proper decoupling limits supply-noise coupling into the signal path. Follow the specified capacitance and voltage rating, and avoid long current loops around the device.
Does MCP603T-I/SN require a heatsink?
The MCP603T-I/SN generally does not require a dedicated heatsink for normal low-voltage, low-power operation because its typical operating current is 230 µA. According to the Microchip manufacturer datasheet, the device supports 2.7 V to 6.0 V single-supply operation. Thermal analysis is still necessary if the package dissipates unusually high power or operates at elevated ambient temperatures in a confined enclosure.

נתוני עזר הנדסיים עבור MCP603T-I/SN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MCP603T-I/SN for general-purpose low-voltage amplification when the circuit operates from 2.7 V to 6.0 V, the application needs rail-to-rail output, and low typical operating current of 230 µA is valuable. It is particularly suitable for portable sensing, industrial control, active filtering, and moderate-frequency signal conditioning. MCP603-I/SN is the closest same-package alternative when its temperature grade and ordering requirements are acceptable, but the manufacturer ordering information should be checked before treating the two codes as fully interchangeable. Cross-brand substitutions should not be selected solely from similar headline bandwidth or supply voltage. Verify the SOIC-8 pinout, input common-mode range, output drive, offset limits, noise, stability with the intended load, lifecycle status, and exact temperature requirements before releasing a replacement into production.

השוואה עם חלופות

פרמטר מוצר זה MCP603-I/SN
Brand Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC - same
Circuit Count 1 circuit 1 circuit
Supply Voltage Range 2.7 V to 6.0 V 2.7 V to 6.0 V
Gain-Bandwidth Product 2.8 MHz 2.8 MHz - 0% difference

מבדילים עיקריים

  • Low operating current supports portable analog designs (לעומתMCP603-I/SN)
  • Industrial-temperature ordering option (לעומתMCP603-I/SN)
  • Low-voltage rail-to-rail output operation (לעומתMCP603-I/SN)

הערות תכנון

Place the input bypass capacitor, output bypass capacitor, and ground connection directly beside the corresponding MCP603T-I/SN pins. Keep traces short and route the return current beneath the device rather than through a long shared path. The 230 µA typical operating current makes the amplifier itself easy to power, but poor grounding can still dominate the noise performance of a sensitive analog stage.

Use the minimum feedback-trace length practical and avoid routing the output beside high-impedance input nodes, where capacitive coupling can create oscillation or disturb small signals. Verify stability with the final source and load impedances and the selected gain. The 2.8 MHz gain-bandwidth product is sufficient for many sensor and control signals, but it does not guarantee stability for every external load.

Do not assume that rail-to-rail output guarantees full input common-mode range. Check the input range and output swing against the actual 2.7 V to 6.0 V supply, and use the manufacturer pin description to avoid assigning pins from a similar amplifier. For low-current designs, also include resistor leakage, sensor bias current, and external circuit consumption in the complete power budget.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No definitive environmental or automotive qualification declarations were identified for this exact ordering code. Use the current Microchip product and material-compliance documentation for production approval.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

mcp603 rehlko MCP603T-I/SN datasheet MCP603T-I/SN pinout MCP603T-I/SN datasheet pdf MCP603T-I/SN equivalent MCP603T-I/SN replacement MCP603T-I/SN cross reference MCP603T-I/SN vs MCP603-I/SN MCP603T-I/SN footprint MCP603T-I/SN price MCP603T-I/SN stock Microchip MCP603T-I/SN

רכיבים ומונחים קשורים

Microchip Technology MCP603T-I/SN MCP603 MCP603-I/SN MCP603T-I/CH operational amplifier op amp CMOS operational amplifier analog signal conditioner voltage amplifier gain-bandwidth product rail-to-rail output input offset voltage input bias current slew rate quiescent current single-supply operation active filter sensor interface SOIC-8 QFN family surface mount industrial electronics portable electronics
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר