Microchip Technology

MCP606T-I/OT - 155kHz Micropower Op Amp | Microchip

MPN: MCP606T-I/OT ✓ פעיל
2.5 V to 6.0 V Vdss 18.7 µA Id SOT-23-5 Package
כמות הזמנה מינימלית: 1 |

MCP606T-I/OT סקירה

Microchip Technology MCP606T-I/OT is a single-circuit, unity-gain-stable CMOS operational amplifier with a 155 kHz gain-bandwidth product, 18.7 µA typical operating current, and rail-to-rail output swing in a SOT-23-5 package. Its 2.5 V to 6.0 V supply range supports low-voltage, low-power analog systems.

An operational amplifier, or op amp, is a high-gain differential-input amplifier used to amplify voltage differences. In the broader semiconductor hierarchy, an op amp belongs to the amplifier IC and analog signal-conditioning categories. It forms the core of sensor interfaces, transimpedance stages, active filters, buffers, and precision control loops that require accurate signal amplification.

The MCP606 combines a maximum input offset voltage of 250 µV, a maximum input bias current of 80 pA at +85 °C, and a typical operating current of 18.7 µA. Its unity-gain stability permits direct use as a voltage follower without a compensation network. Rail-to-rail output operation improves usable output range, although the input common-mode range must still be checked against the application requirements.

Microchip's advanced CMOS process supports low bias current, high open-loop gain, low power consumption, and rail-to-rail output swing in a compact package. The 155 kHz gain-bandwidth product is adequate for low-frequency precision signal paths, sensor conditioning, and portable instrumentation, but it makes the device unsuitable for high-speed video or wide-band communications applications.

Typical uses include battery-powered sensor interfaces, portable measurement systems, industrial monitoring, low-current filtering, and general-purpose analog signal conditioning. The low 25 µA-class operating demand is particularly useful when battery life is more important than bandwidth, while the 250 µV maximum offset supports precision-oriented signal chains when errors are calibrated or otherwise controlled.

Design the input network to avoid excessive parasitic capacitance, especially when long traces or high-impedance sources are involved. Check output-current capability, input common-mode limits, output swing, noise behavior, and stability requirements under the intended supply voltage. Decoupling should follow the manufacturer datasheet recommendations and be placed close to the supply pins.

This product page combines manufacturer specifications, verified listing details, application guidance, and same-family drop-in alternatives. It also identifies where engineers must compare electrical limits and package details before approving a substitute for production use.

חלופות תחליף ישיר עבור MCP606T-I/OT — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

MCP606-I/OT

✅ Drop-In
📦 SOT-23-5
Same 155 kHz bandwidth, 18.7 µA typical current, and 250 µV maximum offset; orderable grade marking differs

📋 חלופה להתייחסות (לא בקטלוג)

MCP606T-I/OTVAO

✅ Drop-In
📦 SOT-23-5
Same 155 kHz bandwidth, 250 µV maximum offset, and 2.5 V minimum supply; orderable qualification suffix differs

📋 חלופה להתייחסות (לא בקטלוג)

MCP609T-I/OT

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 SOT-23-5
Gain-bandwidth product is 300 kHz versus 155 kHz, approximately 94% higher; operating current also differs

📋 חלופה להתייחסות (לא בקטלוג)

MCP607T-I/OT

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 SOT-23-5
Gain-bandwidth product is 110 kHz versus 155 kHz, approximately 29% lower; lower operating current

📋 חלופה להתייחסות (לא בקטלוג)

MCP606T-I/OT דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Supply Voltage Range 2.5 V to 6.0 V
Gain-Bandwidth Product 155 kHz
Typical Operating Current 18.7 µA
זרם מנוחה 25 µA
Maximum Input Offset Voltage 250 µV
Maximum Input Bias Current 80 pA at +85 °C
Unity-Gain Stability Yes
Output Swing Rail-to-rail
מארז SOT-23-5
סוג הרכבה Surface mount
Process Technology Advanced CMOS

מדריך תצורת פינים של MCP606T-I/OT sot-23-5

תצורת פינים עבור MCP606T-I/OT (מארזת sot-23-5). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת sot-23-5 עבור MCP606T-I/OT

אין נתוני פריסת פינים מפורטים עבור MCP606T-I/OT.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MCP606T-I/OT מתאים עבור 6 יישוםs: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Process Monitoring, Precision Active Filtering, Low-Power Voltage Buffer, Audio and Communication Interface.

🧩

Battery-Powered Sensor Conditioning

The MCP606T-I/OT fits low-power sensor interfaces because its 2.5 V minimum supply and 18.7 µA typical operating current limit the energy required from a compact battery. The 80 pA maximum input bias current at +85 °C is especially useful with high-impedance sensors, where amplifier input leakage could otherwise create a significant measurement error. The device can buffer the sensor output or amplify a small differential signal in a unity-gain-stable configuration. Its rail-to-rail output also helps use much of the available supply range.

💊

Portable Medical Monitoring

MCP606T-I/OT can serve as a low-power front-end amplifier in portable monitoring equipment where every microamp of supply current affects battery life. Its 18.7 µA typical operating current, 250 µV maximum offset, and 80 pA maximum input bias current provide a useful combination for precision sensor interfaces. The unity-gain-stable topology supports direct buffering, while the 155 kHz gain-bandwidth product is appropriate for slow physiological or diagnostic signals rather than wideband waveforms.

🏭

Industrial Process Monitoring

The MCP606T-I/OT is appropriate for low-frequency industrial process monitoring when the measured signal requires amplification but not high-speed bandwidth. A 155 kHz gain-bandwidth product provides useful loop gain for many slow control and measurement loops, while low bias current accommodates high-impedance sensors and resistive dividers. Operating from 2.5 V to 6.0 V supports compact acquisition hardware. Designers should still verify the input common-mode range, output swing, noise, and output-current capability for each industrial input range.

🔧

Precision Active Filtering

MCP606T-I/OT can implement first-order or modest-bandwidth active filters in low-power instrumentation. Its unity-gain stability supports non-inverting amplifier and buffer stages, while the 155 kHz gain-bandwidth product provides headroom above the frequency range of many precision and audio-band measurement filters. The low typical operating current of 18.7 µA helps preserve battery life. Stable passive-component selection and careful grounding are required because the amplifier's bandwidth and offset errors directly influence filter accuracy.

⚡

Low-Power Voltage Buffer

MCP606T-I/OT is useful as a unity-gain voltage buffer when a source must drive a higher-impedance downstream stage. Unity-gain stability removes the need for a compensation capacitor in the basic follower circuit, and the rail-to-rail output helps preserve signal headroom. Its 250 µV maximum offset is suitable for many general-purpose buffering tasks, while the 18.7 µA typical operating current supports portable equipment. Confirm that the source, load, and output capacitive loading remain within the device's operating limits.

🎧

Audio and Communication Interface

MCP606T-I/OT can handle low-frequency audio and communication interface signals where the emphasis is on low power, low offset, and rail-to-rail output rather than wide bandwidth. Its 155 kHz gain-bandwidth product is adequate for many microphone preamplifier, line-level buffer, and control-signal stages, but not for high-bandwidth audio or RF modulation paths. The low 18.7 µA typical operating current is advantageous in portable audio equipment. Input bias noise, source impedance, and output-loading calculations remain necessary for high-impedance audio sources.

סיכום מוצרים מומלצים

MCP606-I/OT Same-family low-power sensor amplifier בשימוש ב-: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Process Monitoring, Low-Power Voltage Buffer, Audio and Communication Interface MCP607T-I/OT Lower-bandwidth micropower family option בשימוש ב-: Battery-Powered Sensor Conditioning, Precision Active Filtering, Audio and Communication Interface MCP606T-I/OTVAO Same-family alternative with different orderable suffix בשימוש ב-: Portable Medical Monitoring, Precision Active Filtering MCP609T-I/OT Higher-bandwidth option for faster loops בשימוש ב-: Industrial Process Monitoring, Low-Power Voltage Buffer
What are the key specifications of MCP606T-I/OT that engineers should know?
The MCP606T-I/OT is a 2.5 V to 6.0 V, single-supply CMOS op amp with a 155 kHz gain-bandwidth product, 18.7 µA typical operating current, 250 µV maximum input offset voltage, and rail-to-rail output swing. According to the Microchip MCP606 product page, the device is unity-gain stable and operates from a single supply. It is packaged in SOT-23-5 and is intended for low-power, high-input-impedance analog signal conditioning.
Where can I download the MCP606T-I/OT datasheet PDF?
The MCP606T-I/OT datasheet can be accessed through the Microchip MCP606 product page at https://www.microchip.com/en-us/product/MCP606. The family documentation describes a 2.5 V to 6.0 V micropower CMOS op amp with a 155 kHz gain-bandwidth product and 18.7 µA typical operating current. Use the manufacturer's datasheet for the authoritative pin description, electrical limits, test conditions, and application circuit.
Where is the pinout for the MCP606T-I/OT SOT-23-5 package?
Use the pin-description table and package drawing in the Microchip MCP606 family datasheet to assign PCB connections for the MCP606T-I/OT. The device is a five-pin SOT-23-5 operational amplifier, so the drawing should show the standard surface-mount package orientation and all five terminal assignments. Do not infer pin functions from a generic SOT-23-5 drawing because amplifier pin arrangements can differ between families.
Is MCP606T-I/OT suitable for battery-powered sensor interfaces?
Yes, MCP606T-I/OT is well suited to battery-powered sensor interfaces because its supply range begins at 2.5 V and its typical operating current is 18.7 µA. According to the Microchip MCP606 product page, low bias current and high open-loop gain support high-impedance source conditioning. Its rail-to-rail output improves signal range, while unity-gain stability allows direct voltage-follower use.
Can MCP606T-I/OT be used as a voltage follower?
Yes, MCP606T-I/OT can be used as a voltage follower because it is unity-gain stable. The Microchip MCP606 product page identifies unity-gain operation as a supported feature, allowing the output to follow the non-inverting input without an external compensation capacitor. Check the input common-mode range and output swing at the selected supply voltage before closing the feedback loop.
What is the input bias current of MCP606T-I/OT?
The maximum input bias current of MCP606T-I/OT is 80 pA at +85 °C. This very low bias current is important when the amplifier senses nanoampere-scale source currents or works with high-impedance sensors, where input leakage can otherwise create a larger error than the signal itself. The Microchip MCP606 family documentation identifies low input bias current as a core feature of the device.
What is the difference between MCP606T-I/OT and MCP606-I/OT?
MCP606T-I/OT and MCP606-I/OT are variants of the same Microchip MCP606 amplifier family, with the listed operating specifications centered on 155 kHz gain-bandwidth product, 18.7 µA typical operating current, and 250 µV maximum offset voltage. Their orderable qualification and temperature-grade markings differ, so procurement should confirm the exact grade required by the application. The MCP606T-I/OT retains the SOT-23-5 footprint.
MCP606T-I/OT vs MCP607T-I/OT - which is better for a precision low-frequency circuit?
Choose MCP606T-I/OT when 155 kHz of gain-bandwidth product is useful, while MCP607T-I/OT trades bandwidth for lower power. MCP606 is the better match for applications needing more loop gain or signal bandwidth at low frequency. Both belong to the same Microchip micropower CMOS family and use the SOT-23-5 footprint, but their exact input, output, and power limits should be compared against the circuit requirements.
When should I choose MCP606T-I/OT over MCP609T-I/OT?
Choose MCP606T-I/OT when a 155 kHz gain-bandwidth product and 18.7 µA typical operating current provide a better balance between response and power. MCP609T-I/OT is the higher-bandwidth member of the same family and is preferable when loop gain or signal speed matters more. For slow precision measurements, MCP606 may also be easier to stabilize, provided both devices meet the required noise, offset, and output-current specifications.
What can replace MCP606T-I/OT?
MCP606-I/OT, MCP606T-I/OTVAO, MCP607T-I/OT, and MCP609T-I/OT are same-family Microchip options with the SOT-23-5 footprint. MCP606-I/OT and MCP606T-I/OTVAO provide the closest functional match; MCP607T-I/OT offers lower bandwidth and power, while MCP609T-I/OT offers higher bandwidth. Verify the complete pin description, electrical limits, temperature grade, and qualification before replacing MCP606T-I/OT.
Is there a verified cross-brand drop-in replacement for MCP606T-I/OT?
No verified cross-brand drop-in replacement is established by the available component cross-reference information. The MCP606 family is particularly dependent on low offset, low bias current, unity-gain stability, and rail-to-rail output behavior, so a superficially similar single op amp may not be interchangeable. Compare the candidate's supply range, input common-mode range, output swing, offset, bias current, bandwidth, noise, and SOT-23-5 pin assignment before considering substitution.
Where to buy MCP606T-I/OT online?
Use the Request a Quote form on this page to request the MCP606T-I/OT, current pricing, stock status, and lead time. The exact MCP606T-I/OT order code should be entered so that the quotation matches its SOT-23-5 package and qualification requirements. This approach also lets the buyer request the desired quantity and shipping information without relying on a static listing price.
What is the price of MCP606T-I/OT?
The current commercial price of MCP606T-I/OT is best obtained through the Request a Quote form on this page. The form supports a quotation for the exact orderable MPN, quantity, and delivery requirements. Pricing can vary with volume, package, qualification, inventory status, and supply conditions, so confirm the current amount directly rather than relying on an outdated catalog figure.
What is the lead time and stock status of MCP606T-I/OT?
Current MCP606T-I/OT stock and lead time should be requested through the Request a Quote form on this page. The quote response can confirm factory inventory, scheduled production, order quantity, and estimated delivery for the exact MCP606T-I/OT suffix. For new production designs, also request lifecycle and traceability information during the same review.
Is MCP606T-I/OT compliant with RoHS and REACH?
The RoHS and REACH status of MCP606T-I/OT should be confirmed for the exact orderable suffix using the manufacturer's product documentation and material-compliance records. The available technical listing identifies the device as a Microchip Technology SOT-23-5 operational amplifier but does not state a specific declaration. For regulated production, request the current compliance declaration rather than treating general family information as sufficient evidence.

נתוני עזר הנדסיים עבור MCP606T-I/OT — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MCP606T-I/OT when the application needs a compact, low-power op amp with 155 kHz gain-bandwidth product, 18.7 µA typical operating current, 250 µV maximum offset, and rail-to-rail output. Choose MCP606-I/OT or MCP606T-I/OTVAO when their specific orderable grade matches the production requirements better. Choose MCP609T-I/OT when higher bandwidth is required and the additional power is acceptable. Choose MCP607T-I/OT when lower bandwidth and reduced power are acceptable for a narrow-band or very low-current design. For any substitution, verify the five-pin SOT-23-5 terminal arrangement, input common-mode range, output swing, output-current capability, noise, temperature grade, and application qualification. A shared package and close bandwidth figures do not by themselves prove that every operating condition is interchangeable.

השוואה עם חלופות

פרמטר מוצר זה MCP606-I/OT MCP606T-I/OTVAO MCP609T-I/OT MCP607T-I/OT
Package SOT-23-5 SOT-23-5 SOT-23-5 SOT-23-5 SOT-23-5
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Amplifier Type Single CMOS operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier
Supply Voltage Range 2.5 V to 6.0 V 2.5 V to 6.0 V 2.5 V to 6.0 V 2.5 V to 6.0 V 2.5 V to 6.0 V
Gain-Bandwidth Product 155 kHz 155 kHz 155 kHz 300 kHz 110 kHz
Unity-Gain Stable Yes Yes Yes Yes Yes
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Process Technology Advanced CMOS Advanced CMOS Advanced CMOS CMOS CMOS

מבדילים עיקריים

  • Closest same-family electrical match (לעומתMCP606-I/OT)
  • Higher bandwidth option without changing package family (לעומתMCP609T-I/OT)
  • Lower-power option for narrow-band designs (לעומתMCP607T-I/OT)

הערות תכנון

Do not assume that every 5-pin SOT-23-5 amplifier has the same terminal arrangement. Use the MCP606 family package drawing and pin-description table before assigning power, output, and differential inputs. Also verify the input common-mode range at the selected supply voltage. Rail-to-rail output does not automatically mean that both inputs can accept a signal extending to either supply rail.

Keep the op-amp input nodes short and shield them from switching-node and clock traces. High-impedance sources amplify leakage and stray capacitance, so guard routing and a grounded guard ring can help when the source impedance is high. Place supply bypass capacitance close to the device and return its ground path without sharing a noisy return segment with motors, relays, or switching regulators.

Estimated maximum output-current demand must be checked against the MCP606 load capability; this calculation cannot be completed without the application load. For a resistive load, use ILOAD = VOUT/RL, then confirm that both DC and transient demand remain within the output-current and stability limits in the manufacturer datasheet. The 18.7 µA typical operating current represents amplifier supply demand, not output-current capability.

The 155 kHz gain-bandwidth product limits useful closed-loop bandwidth and requires separate noise-gain analysis for each amplifier topology. At low frequencies the device is generally straightforward, but capacitive loading or high closed-loop gain can reduce stability. Keep feedback resistors close, avoid excessive output capacitance, and verify phase margin with the selected gain and load before release to production.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance declarations for the exact MCP606T-I/OT orderable suffix were not identified in the available technical records. Confirm current declarations with Microchip Technology before regulatory release.

הנתונים אומתו בתאריך: 2026-11-20 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MCP606T-I/OT datasheet MCP606T-I/OT pinout MCP606T-I/OT specifications MCP606T-I/OT equivalent MCP606T-I/OT replacement MCP606T-I/OT price MCP606T-I/OT stock MCP606T-I/OT SOT-23-5 MCP606T-I/OT vs MCP607T-I/OT MCP606T-I/OT battery powered sensor Microchip MCP606T-I/OT MCP606 155 kHz op amp

רכיבים ומונחים קשורים

Microchip Technology MCP606T-I/OT MCP606-I/OT MCP606T-I/OTVAO MCP607T-I/OT MCP609T-I/OT operational amplifier op amp amplifier IC analog signal conditioning CMOS rail-to-rail output unity-gain stable gain-bandwidth product input offset voltage input bias current quiescent current SOT-23-5 SOT-23 family surface-mount package battery-powered sensor interface industrial process monitoring active filter voltage follower
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר