MPC8349EVVAJDB - PowerQUICC II Pro 533MHz SoC | NXP
MPN: MPC8349EVVAJDB ✓ פעילMPC8349EVVAJDB סקירה
A PowerQUICC II Pro integrated host processor is a class of embedded SoC that combines a high-performance PowerPC CPU core with dedicated communications peripherals, eliminating the need for an external MAC, security accelerator, or memory controller in routers, switches, and access equipment. Positioned within the hierarchy PowerPC -> embedded communications SoC -> PowerQUICC II Pro -> MPC8349E family, the part integrates the e300 core (an enhanced version of the classic PowerPC 603e core with 32 KB L1 instruction and data caches), the system interface unit (SIU), dual DDR memory controllers, and the QUICC Engine for protocol termination.
Key differentiating features include hardware-accelerated security (SEC 2.0+), a 32-bit DDR1/DDR2 memory controller supporting up to 1 GB of addressable memory, two 32-bit/33 MHz PCI interfaces, a 10/100/1000 Mb/s Ethernet MAC, USB 2.0 full-speed device/host, and flexible I/O voltages (1.8V, 2.5V, 3.3V). The 0.13 micron CMOS process keeps typical core power in the 1.5 to 2.5 W range, while the industrial-grade 0 to 105 C junction temperature range supports carrier-grade equipment deployments.
Typical applications include wired and wireless routing and switching, secure VPN gateways, industrial control, networked storage controllers, and PCI-based embedded designs. The dual-PCI interface allows simultaneous connection to a host CPU and a downstream device, simplifying system partitioning.
When designing with this part, allocate at least four PCB layers for power/ground integrity, follow the Freescale/NXP layout guide for DDR routing (length-matched, 50 ohm impedance), and use the SEC accelerator for AES/3DES/SHA to offload cryptographic work from the CPU.
This page synthesizes distributor pricing, drop-in family variants, and design notes that go beyond the manufacturer datasheet to accelerate evaluation and second-source decisions.
חלופות תחליף ישיר עבור MPC8349EVVAJDB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MPC8349EVVAJDB (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature, PCI Interfaces, Core Architecture, Ethernet, Memory Controller.
MPC8349CVVAJDB
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MPC8349VVAGDB
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←MPC8349EVVAJD
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MPC8349EVVAJDB דירוגים מרביים ומאפיינים חשמליים
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Part Family | PowerQUICC II Pro (MPC8349E) |
| Core Architecture | PowerPC e300 (32-bit) |
| Core Frequency | 533 MHz |
| טמפרטורת פעולה | 0 C to +105 C (Tj) |
| מארז | 672-LBGA (35x35 mm) |
| Terminal Form | BALL |
| Number of Terminals | 672 |
| Memory Controller | DDR1/DDR2, 32-bit, up to 266 MHz |
| PCI Interfaces | 2x PCI 32-bit/33 MHz |
| Ethernet | 10/100/1000 Mb/s (1x GMII/TBI/RGMII) |
| USB | USB 2.0 Full-Speed (Device/Host) |
| Security Engine | SEC 2.0+ (AES, 3DES, SHA, MD5, RSA, Kasumi) |
| I/O Voltage | 1.8 V / 2.5 V / 3.3 V |
| Process Technology | 0.13 micron CMOS |
| L1 Cache | 32 KB instruction + 32 KB data |
| סוג הרכבה | Surface Mount (BGA) |
מדריך תצורת פינים של MPC8349EVVAJDB 672-lbga (35x35 mm)
תצורת פינים עבור MPC8349EVVAJDB (מארזת 672-lbga (35x35 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MPC8349EVVAJDB.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MPC8349EVVAJDB מתאים עבור 6 יישוםs: Enterprise Router / VPN Gateway, Wireless Access Controller, Network Attached Storage (NAS) Controller, Industrial Control / Factory Automation, PCI-Based Embedded Computing, Secure Communications Appliance.
Enterprise Router / VPN Gateway
The MPC8349EVVAJDB is a strong fit for enterprise routers and VPN gateways because it integrates the e300 PowerPC core, Gigabit Ethernet MAC, dual PCI, and hardware SEC on a single die. Hardware-accelerated AES/3DES/SHA allows IPsec and TLS tunnels to run at line rate without burdening the CPU, and the DDR1/DDR2 controller supports the memory bandwidth needed for routing tables and crypto contexts. The 672-LBGA package supports fanless industrial enclosures at 0-105 C.
מומלץ
Wireless Access Controller
The MPC8349EVVAJDB suits wireless access controllers and small-cell base stations thanks to its combination of Gigabit Ethernet for backhaul, dual PCI for expansion to DSP or radio cards, and SEC for authentication. The e300 core at 533 MHz handles management-plane traffic while offloading crypto to the SEC engine. The 0.13 micron process and 1.8/2.5/3.3 V I/O simplify integration with legacy radios and modern DSPs.
מומלץ
Network Attached Storage (NAS) Controller
NAS controllers and storage area networks benefit from the MPC8349EVVAJDB's PCI interfaces for connecting to SATA or Fibre Channel controllers, Gigabit Ethernet for network attachment, and DDR1/DDR2 memory support for caching. The hardware security engine offloads file-encryption workloads, while the e300 core handles filesystem, RAID, and network protocols. The 672-LBGA's high pincount exposes all required parallel interfaces.
מומלץ
Industrial Control / Factory Automation
For industrial control and factory automation, the MPC8349EVVAJDB delivers deterministic networking with its PCI interfaces for I/O cards, Gigabit Ethernet for SCADA connectivity, and SEC for secure device authentication. The 0-105 C junction temperature range supports cabinet and outdoor installations, while the 672-LBGA package enables compact carrier boards. Real-time operating systems (VxWorks, QNX) run natively on the e300 core.
מומלץ
PCI-Based Embedded Computing
The MPC8349EVVAJDB is widely used as a PCI host or device in embedded computing platforms. Its two PCI interfaces allow it to act as a bridge between an upstream x86 host and downstream DSP or FPGA cards, while the e300 core runs real-time control code and the SEC engine handles secure boot. The 672-LBGA package exposes all PCI signals cleanly for short, impedance-controlled board traces.
מומלץ
Secure Communications Appliance
For secure communications appliances (SSL gateways, IPsec concentrators, encrypted backhaul), the MPC8349EVVAJDB's hardware SEC engine accelerates AES/3DES/SHA/RSA/Kasumi at wire speed, while the e300 core manages sessions and routing. The 533 MHz clock is sufficient for dozens of tunnels at small packet sizes, and the DDR2 controller holds large security association tables. Industrial thermal rating supports outdoor or telco deployments.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MPC8349EVVAJDB — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MPC8349CVVAJDB | MPC8349VVAGDB | MPC8349EVVAJD |
|---|---|---|---|---|
| Package | 672-LBGA (35x35 mm) | 672-LBGA (35x35 mm) - same | 672-LBGA (35x35 mm) - same | 672-LBGA (35x35 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Frequency | e300 / 533 MHz | e300 / 533 MHz | e300 / ~500 MHz | e300 / 533 MHz |
| Security Engine (SEC) | Yes (SEC 2.0+) | No | No | Yes (SEC 2.0+) |
| DDR Controller | DDR1/DDR2, 32-bit | DDR1/DDR2, 32-bit | DDR1/DDR2, 32-bit | DDR1/DDR2, 32-bit |
| PCI Interfaces | 2x PCI 32-bit/33 MHz | 2x PCI 32-bit/33 MHz | 2x PCI 32-bit/33 MHz | 2x PCI 32-bit/33 MHz |
| Ethernet MAC | 1x GbE (GMII/RGMII) | 1x GbE (GMII/RGMII) | 1x GbE (GMII/RGMII) | 1x GbE (GMII/RGMII) |
מבדילים עיקריים
- Integrated hardware security engine (SEC 2.0+) for IPsec/TLS offload (לעומתMPC8349CVVAJDB)
- Same-family drop-in for second-sourcing (לעומתMPC8349VVAGDB)
- Single-chip integration reduces BOM (לעומתMPC8347VVAJDB)
הערות תכנון
The 672-LBGA package requires a minimum 4-layer PCB stackup with dedicated power and ground planes to meet NXP's DDR signal-integrity recommendations. DDR traces must be length-matched within 25 mils and routed to 50 ohm single-ended impedance (100 ohm differential for clock/address). Allocate at least 2 oz copper for the ground plane under the BGA to reduce Vcore bounce. Follow the Freescale AN3369 layout guide for the DDR2 controller for production-grade designs.
At typical router workloads (e300 @ 533 MHz, DDR2 active, one GbE port active), the die dissipates approximately 1.5-2.5 W. With the LBGA package theta_JA around 12-15 C/W on a 4-layer board, the junction-to-ambient rise is roughly 25-40 C, well within the 105 C junction limit at 70 C ambient. For sealed enclosures with no airflow, derate by 10-15 C. Avoid placing the BGA directly above heatsink fins where convection is poor.
Do not bypass the SEC initialization sequence if your firmware uses hardware crypto - failing to initialize the SEC register map causes silent encryption faults. Always source the DDR2 termination voltage (1.8 V VTT) with a high-current LDO; sharing VTT with a general-purpose rail causes jitter and CRC errors. The two PCI interfaces share pins - configure pin muxing before binding drivers. Boot from flash with proper wait-state settings for the chosen NOR device.
מידע על תאימות
Compliance flags for RoHS, REACH, lead-free, halogen-free, and conflict minerals were not present in the verified web data; see _validation_note.
