Texas Instruments

MSP430F2272IDA - 16MHz 32KB Flash Mixed-Signal MCU | TI

MPN: MSP430F2272IDA ✓ פעיל
38-pin TSSOP (DA) Package 16 MHz Speed 32KB Memory
כמות הזמנה מינימלית: 1 |

MSP430F2272IDA סקירה

Texas Instruments MSP430F2272IDA is a 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz MSP430 RISC CPU, 32KB Flash memory, 512B SRAM, a 10-bit ADC, and I2C, SPI, and UART interfaces in a 38-pin TSSOP package.

A microcontroller is a programmable semiconductor system that combines a CPU, memory, and peripherals on one integrated circuit. The MSP430F2272 belongs to the MSP430 mixed-signal microcontroller family and uses a 16-bit RISC architecture with 16-bit registers and constant generators. Its integrated analog and communications peripherals allow compact designs to measure signals, control actuators, and communicate with external sensors without requiring several separate devices.

The device operates at up to 16 MHz with a 125 ns instruction cycle time. Its 32KB Flash provides program storage, while 512B SRAM supports working memory for embedded control routines. The 10-bit ADC supports analog measurement tasks, and the I2C, SPI, and UART interfaces provide options for connecting sensors, displays, transceivers, and other digital peripherals. The five power-saving modes support duty-cycled designs where standby or off-state consumption matters.

The mixed-signal feature set makes the MSP430F2272 suitable for industrial instrumentation, sensor conditioning, portable measurement equipment, small control systems, and embedded communication nodes. The FLL+ frequency-locked loop supports controlled clock operation, while scan capability enables background instruction execution and can improve responsiveness in interrupt-driven designs.

Designers should pay close attention to the 38-pin TSSOP footprint, pin multiplexing, and the power budget of the selected operating mode. The ADC reference, communication baud rates, and firmware timing should be checked against the system clock and noise requirements. The low-power architecture is most valuable when firmware can place the MCU into a suitable standby mode during idle periods.

This product page combines manufacturer specifications, application guidance, drop-in replacement information, comparison parameters, and practical layout notes to help engineers move from component selection to a complete embedded design.

חלופות תחליף ישיר עבור MSP430F2272IDA — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

MSP430F2272IDAR

✅ Drop-In
📦 38-pin TSSOP (DA)
Same MSP430F2272 family identity and 38-TSSOP package; suffix-specific ordering details differ by 0% in verified package and family-level parameters

📋 חלופה להתייחסות (לא בקטלוג)

MSP430F2272IDA דירוגים מרביים ומאפיינים חשמליים

Product Type 16-bit ultra-low-power mixed-signal microcontroller
CPU Architecture 16-bit RISC MSP430
תדר שעון מקסימלי 16 MHz
Instruction Cycle Time 125 ns
Flash Memory 32KB
SRAM 512B
ADC Resolution 10-bit
Serial Interfaces I2C, SPI, UART
מארז 38-pin TSSOP (DA)
Power-Saving Modes 5 modes
Standby Wake-Up Time Less than 6 us
Clock Architecture Frequency-Locked Loop, FLL+
Register Width 16-bit
Background Processing Scan IF for background execution
סוג הרכבה Surface mount

מדריך תצורת פינים של MSP430F2272IDA 38-pin tssop (da)

תצורת פינים עבור MSP430F2272IDA (מארזת 38-pin tssop (da)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 38-pin tssop (da) עבור MSP430F2272IDA

אין נתוני פריסת פינים מפורטים עבור MSP430F2272IDA.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MSP430F2272IDA מתאים עבור 6 יישוםs: Industrial Sensor Measurement, Portable Environmental Monitoring, Battery-Powered Instrumentation, Digital Communication Controller, Embedded Motor and Actuator Control, Smart Home and IoT Sensor Node.

🏭

Industrial Sensor Measurement

The MSP430F2272IDA fits compact sensor-conditioning and acquisition systems because its 10-bit ADC is paired with a 16 MHz MSP430 RISC CPU, 32KB Flash, and 512B SRAM in one 38-pin TSSOP device. Firmware can sample analog channels, apply calibration and filtering, and store operational data locally before forwarding results through I2C, SPI, or UART. The mixed-signal integration reduces the need for separate interface circuitry and helps achieve a small board area. Its five power-saving modes also support periodic measurement systems that remain active only while acquiring or processing data.

🧩

Portable Environmental Monitoring

For portable environmental monitoring, the MSP430F2272IDA combines low-power operation with enough processing capability for local sensor management. The 16 MHz CPU provides a 125 ns instruction cycle time for responsive control loops, while 512B SRAM supports working variables and 32KB Flash holds application firmware. I2C or SPI can connect digital sensors, and UART can provide a simple host or logging interface. The five power-saving modes and standby wake-up in less than 6 us allow a duty-cycled design to reduce activity while preserving quick response to scheduled measurements or external events.

⚡

Battery-Powered Instrumentation

The MSP430F2272IDA suits battery-powered instruments where CPU activity, memory, and analog conversion must coexist in a compact controller. Its 16-bit RISC architecture and 16 MHz clock support efficient firmware execution, while the integrated 10-bit ADC handles process or instrumentation signals without a separate converter. I2C, SPI, and UART provide flexible connectivity for configuration boards, external transducers, and data loggers. Power-conscious firmware can use the device's five power-saving modes between measurements, although the final battery-life calculation must include the selected regulator, external sensor currents, and communication activity.

🌐

Digital Communication Controller

The MSP430F2272IDA can serve as a compact communications controller in an embedded node because it provides I2C, SPI, and UART in the same device as its 16 MHz CPU. SPI suits higher-throughput peripheral links, I2C supports addressable sensors and configuration devices, and UART provides a straightforward serial console or host connection. The 32KB Flash accommodates protocol and application firmware, while 512B SRAM supports packet buffers and working state. Firmware designers should budget interrupt latency and DMA-free peripheral handling against the 125 ns instruction cycle time and validate timing with the selected bus clock.

🔧

Embedded Motor and Actuator Control

The MSP430F2272IDA can control small actuators in cost-sensitive embedded systems because its 16 MHz RISC CPU can execute real-time control routines while the 10-bit ADC monitors command or feedback signals. GPIO resources can operate digital control logic, and I2C or SPI can connect position sensors, drivers, or H-bridge controllers. With 32KB Flash and 512B SRAM, the device is appropriate for focused control tasks rather than large application workloads. Validate timing, output switching requirements, and any safety limits in the exact peripheral implementation before using it in a motor-control design.

🧩

Smart Home and IoT Sensor Node

The MSP430F2272IDA is appropriate for a compact IoT sensor node requiring local analog measurement and several digital interfaces. The integrated 10-bit ADC can acquire a sensor signal, while I2C or SPI connects additional sensing and identification components. UART can provide a simple gateway connection, and the 32KB Flash plus 512B SRAM supports lightweight protocol firmware. Its ultra-low-power positioning and five power-saving modes are useful for battery-operated nodes that wake for periodic sensing. For a connected product, confirm radio-module interface levels, timing, and current budget during system integration.

סיכום מוצרים מומלצים

MSP430F2272IDA Texas Instruments בשימוש ב-: Industrial Sensor Measurement, Portable Environmental Monitoring, Battery-Powered Instrumentation, Digital Communication Controller, Embedded Motor and Actuator Control, Smart Home and IoT Sensor Node MSP430F2272IDAR Related 38-TSSOP family configuration בשימוש ב-: Industrial Sensor Measurement, Portable Environmental Monitoring, Battery-Powered Instrumentation, Digital Communication Controller, Embedded Motor and Actuator Control, Smart Home and IoT Sensor Node
What is the MSP430F2272IDA?
The MSP430F2272IDA is a Texas Instruments 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz MSP430 RISC CPU, 32KB Flash, 512B SRAM, a 10-bit ADC, and I2C, SPI, and UART interfaces. According to the Texas Instruments product information, it is packaged in a 38-pin TSSOP (DA) package for compact embedded-control designs.
What are the key specifications of MSP430F2272IDA that engineers should know?
The main MSP430F2272IDA specifications are a 16 MHz maximum clock frequency, 125 ns instruction cycle time, 32KB Flash memory, 512B SRAM, and a 10-bit ADC. The device also provides I2C, SPI, and UART serial interfaces, five power-saving modes, FLL+ clocking, and a 38-pin TSSOP package. These parameters define its performance, memory budget, connectivity, and PCB footprint.
What is the operating voltage of MSP430F2272IDA?
The MSP430F2272IDA operating voltage range is listed as [DATA_NEEDED: operating voltage range]. Use the voltage limits and external-component recommendations in the Texas Instruments MSP430F2272 datasheet when selecting the supply regulator, decoupling capacitors, and communication pull-ups for the target board.
Does MSP430F2272IDA support low-power operation?
Yes, the MSP430F2272IDA is an ultra-low-power microcontroller with five power-saving modes and standby wake-up in less than 6 us. Its mixed-signal architecture and duty-cycled operating strategy are appropriate for battery-powered sensing, portable measurement, and embedded systems that spend much of their time waiting for an event.
Where can I download the MSP430F2272IDA datasheet?
The official MSP430F2272 product page is available at https://www.ti.com/product/MSP430F2272, and the exact ordering page is https://www.ti.com/product/MSP430F2272/part-details/MSP430F2272IDA. Download the manufacturer datasheet from TI and use its pin-description table, electrical characteristics, and typical application circuits when laying out a new PCB.
Where is the MSP430F2272IDA pinout?
The MSP430F2272IDA uses a 38-pin TSSOP (DA) package, and its complete pin assignment is published in the Texas Instruments MSP430F2272 datasheet. The product page and part-details link identify the 38-pin package, while the datasheet provides the authoritative numbering, power pins, ground pins, port functions, and alternate peripheral mappings.
Can MSP430F2272IDA replace MSP430F2272IDAR?
The MSP430F2272IDAR is listed as the 38-TSSOP ordering variant associated with the MSP430F2272 family, while MSP430F2272IDA is also specified in a 38-pin TSSOP (DA) package. Before replacing one assembled device with the other, confirm the exact pinout, temperature grade, orderable suffix, and manufacturing requirements against the TI datasheet and ordering information.
What is the best drop-in replacement for MSP430F2272IDA?
The closest documented same-package candidate is the Texas Instruments MSP430F2272IDAR, which is listed with a 38-TSSOP package and the same MSP430F2272 family identity. Because no verified cross-reference confirms a second pin-to-pin device, treat MSP430F2272IDAR as the primary replacement candidate and verify its exact suffix conditions before production use.
What can replace MSP430F2272IDA?
A replacement must match the MSP430F2272 footprint and provide the required memory, ADC, clock, and serial-interface resources. The verified manufacturer and distributor records identify MSP430F2272IDAR as a 38-TSSOP candidate, but they do not establish additional drop-in equivalents. For a PCB-level substitution, compare the complete TI datasheet pin table and confirm firmware compatibility.
Is MSP430F2272IDA suitable for sensor measurement and control systems?
Yes, the MSP430F2272IDA is suitable for sensor measurement and embedded control because it combines a 16 MHz 16-bit RISC CPU with a 10-bit ADC, 512B SRAM, and I2C, SPI, and UART interfaces. Its mixed-signal design supports compact systems that acquire analog measurements, process data locally, and communicate with sensors or a host controller.
MSP430F2272IDA vs MSP430F2272IDAR: which should I select?
MSP430F2272IDA and MSP430F2272IDAR are both associated with the 38-TSSOP MSP430F2272 family, but the ordering suffix can encode differences in packaging or shipment format. Use MSP430F2272IDA when it matches the existing BOM and manufacturer requirements; use MSP430F2272IDAR when that exact orderable configuration is appropriate and the TI part-details record confirms qualification.
When should I choose MSP430F2272IDA over a different mixed-signal MCU?
Choose MSP430F2272IDA when a design benefits from the MSP430 16-bit RISC architecture, 16 MHz clock, 32KB Flash, 512B SRAM, 10-bit ADC, and integrated I2C, SPI, and UART interfaces in a 38-pin TSSOP package. A different MCU may be preferable if it offers a larger memory system, a different package, a specialized peripheral set, or a software ecosystem already standardized in your organization.
Is MSP430F2272IDA in stock?
Current stock status for MSP430F2272IDA should be confirmed through the Request a Quote form on this page. The manufacturer product page and distributor listings identify the part, but stock quantities can change by package, region, and order quantity. Submit the required quantity, target date, and shipment destination with the quote request.
What is the lead time for MSP430F2272IDA?
The current lead time for MSP430F2272IDA should be confirmed through the Request a Quote form on this page. Include the exact MSP430F2272IDA suffix, quantity, packaging requirement, and required delivery date. This lets the supplier confirm current manufacturing and allocation status rather than relying on an outdated stock estimate.
Where can I buy MSP430F2272IDA online?
Use the Request a Quote form on this page to request MSP430F2272IDA pricing, availability, lead time, and order processing. Include the exact MSP430F2272IDA manufacturer part number and required quantity so the request is matched to the correct 38-pin TSSOP configuration.
How should I design the power and decoupling network for MSP430F2272IDA?
Follow the Texas Instruments MSP430F2272 datasheet power-supply recommendations and place the required decoupling capacitors close to the device power pins. The MCU has five power-saving modes, so firmware state transitions and peripheral activity should be coordinated with the supply design. Confirm the exact voltage limits and capacitor values in the datasheet before releasing the PCB layout.
What is the difference between MSP430F2272IDA and MSP430F2272IDAR?
The verified product records show that MSP430F2272IDA is a 38-pin TSSOP (DA) ordering option and that MSP430F2272IDAR is also listed as a 38-TSSOP MSP430F2xx device. The available records do not expose the full suffix-specific parameter table, so the key differences in shipping form, temperature grade, or qualification should be confirmed from the manufacturer ordering information.

נתוני עזר הנדסיים עבור MSP430F2272IDA — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MSP430F2272IDA when a compact 38-pin TSSOP design needs a 16 MHz MSP430 RISC core, 32KB Flash, 512B SRAM, a 10-bit ADC, and I2C, SPI, and UART interfaces. Its five power-saving modes make it particularly suitable for portable sensing, instrumentation, and industrial measurement nodes. Consider MSP430F2272IDAR when that exact same-family ordering configuration is suitable for the production BOM, after checking its suffix-specific qualification and order details. For alternatives outside this family, compare the pin map, memory requirements, ADC performance, serial peripherals, toolchain support, and operating-life-cycle constraints. A similarly featured MCU in another package or with a different peripheral mix may require PCB changes, firmware adaptation, or a different regulator strategy. Treat MSP430F2272IDAR as the closest documented candidate, not as a universal substitute, until the complete manufacturer datasheet and ordering record support every production requirement.

השוואה עם חלופות

פרמטר מוצר זה MSP430F2272IDAR
Package 38-pin TSSOP (DA) 38-TSSOP
Brand Texas Instruments Texas Instruments
Product Type 16-bit ultra-low-power mixed-signal microcontroller MSP430F2xx mixed-signal microcontroller
Maximum Clock Frequency 16 MHz 16 MHz
CPU Architecture 16-bit RISC MSP430 16-bit MSP430
Flash Memory 32KB 32KB (32K x 8 plus 256B)

מבדילים עיקריים

  • Combines a 16 MHz CPU, 10-bit ADC, and three serial interfaces in one mixed-signal MCU (לעומתMSP430F2272IDAR)
  • 125 ns instruction cycle supports responsive embedded-control routines (לעומתMSP430F2272IDAR)
  • Five power-saving modes suit duty-cycled sensing designs (לעומתMSP430F2272IDAR)

הערות תכנון

Place all required decoupling capacitors directly beside the MSP430F2272IDA power pins, with the shortest possible ground return paths. The 38-pin TSSOP footprint leaves limited pin spacing, so follow the manufacturer land pattern and keep analog, digital, and communication routes physically separated where practical. Confirm capacitor values, voltage ratings, and the recommended power topology against the Texas Instruments datasheet before fabrication.

Design the power tree around the MCU's five operating and power-saving modes. Estimate average supply current by accounting for CPU activity, ADC sampling, serial-interface traffic, and the current drawn by connected sensors rather than looking only at active-mode consumption. Firmware should disable unused peripherals and use standby wake-up, which is specified as less than 6 us, to meet a low average-current target.

Route the 10-bit ADC input away from switching supplies, high-current digital nets, and fast serial clock signals. Use a compact analog input section, maintain a continuous ground reference beneath the MCU and analog circuitry, and terminate communication routes according to the actual peripheral specifications. Because the part is in a 38-pin TSSOP package, carefully assign multiplexing pins before finalizing the schematic.

Do not assume that a related MSP430F2xx device is interchangeable solely because it has a similar clock speed or memory size. Verify the exact suffix, package, temperature range, pin multiplexing, ADC features, serial interfaces, and orderable status in the manufacturer documentation. Firmware can also require adaptation when alternate pin functions or clock settings differ, even when the PCB footprint remains the same.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance attributes are not stated in the manufacturer and distributor records. Use the current Texas Instruments product documentation for environmental, material, and automotive qualification decisions.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MSP430F2272IDA datasheet MSP430F2272IDA pinout MSP430F2272IDA datasheet pdf MSP430F2272IDA equivalent MSP430F2272IDA replacement MSP430F2272IDA vs MSP430F2272IDAR MSP430F2272IDA price MSP430F2272IDA stock Texas Instruments MSP430F2272IDA MSP430F2272IDA 38 pin TSSOP MSP430F2272IDA 16MHz 32KB Flash MSP430F2272IDA sensor application

רכיבים ומונחים קשורים

Texas Instruments MSP430F2272IDA MSP430F2272IDAR MSP430F2272 MSP430 CPU16 MSP430F2xx 16-bit RISC mixed-signal microcontroller microcontroller embedded controller semiconductor 10-bit ADC I2C SPI UART 32KB Flash 512B SRAM 16 MHz 125 ns instruction cycle time FLL+ five power-saving modes standby wake-up 38-pin TSSOP TSSOP package family surface mount RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר