Texas Instruments

MSP430F4481IPZ - 8MHz 48KB Flash MCU | Texas Instruments

MPN: MSP430F4481IPZ ✓ פעיל
1.8 V to 3.6 V Vdss 100-pin LQFP (14 x 14 mm) Package 8 MHz Speed 48 KB Memory
כמות הזמנה מינימלית: 1 |

MSP430F4481IPZ סקירה

Texas Instruments MSP430F4481IPZ is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz MSP430 RISC CPU, 48 KB of flash memory, 2 KB of SRAM, and a 100-pin LQFP package measuring 14 x 14 mm. The device integrates a 12-bit ADC, comparator, SPI, UART, and a 160-segment LCD driver for low-power measurement and portable instrumentation.

An ultra-low-power microcontroller is a semiconductor designed to execute firmware while minimizing energy consumption during active operation, standby, and off states. The MSP430 architecture combines a 16-bit RISC processor, 16-bit registers, and constant generators within a mixed-signal system-on-chip hierarchy. This makes it suitable for battery-powered instruments, industrial meters, and embedded systems that require analog measurement and segmented-display control without separate peripheral ICs.

The principal features include an 8 MHz maximum clock, 48 KB flash, 2 KB SRAM, a 12-bit analog-to-digital converter, comparator, SPI and UART interfaces, and support for a 160-segment LCD. The integrated analog and display resources reduce board area and external component count. A 1.8 V to 3.6 V operating range also supports low-voltage portable systems.

The MSP430 CPU uses a 16-bit RISC architecture with 16-bit registers and constant generators to improve code efficiency. The mixed-signal feature set connects the ADC and comparator to general-purpose processing, while the LCD driver supports meter and panel-display applications. The device also provides five low-power operating modes for reducing energy use between measurement events.

Typical uses include handheld multimeters, smart energy meters, industrial process monitors, portable medical instruments, and embedded measurement systems with LCD displays. SPI and UART connectivity allows the controller to communicate with external sensors, transceivers, or data loggers, while the LCD driver simplifies direct segment-display control.

For PCB implementation, use the manufacturer's 100-pin LQFP land pattern and follow the pin-description table in the datasheet when assigning power, ground, analog, and communication functions. Pay particular attention to analog supply routing, ADC input conditioning, LCD segment drive current, and decoupling placement to preserve measurement performance.

This page combines the MSP430F4481IPZ specifications, application guidance, package information, and verified drop-in alternatives to support component selection, schematic design, PCB layout, and sourcing decisions without duplicating the raw manufacturer datasheet tables.

חלופות תחליף ישיר עבור MSP430F4481IPZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MSP430F4481IPZ (אותו גורם צורה וטביעת רגל) — שונים ב ADC Resolution, Flash Memory, Package, CPU Architecture.

Texas Instruments
Package: 100-pin LQFP (PZ), 14 mm x 14 mm
CPU Architecture: 16-bit RISC
השווה עם MSP430F4481IPZ →
Texas Instruments
ADC Resolution: 12 bits
Flash Memory: 60 KB
Package: 100-pin LQFP (PZ), 14 mm x 14 mm
השווה עם MSP430F4481IPZ →

MSP430F448IPZ

✅ Drop-In
Texas Instruments
📦 100-pin LQFP (14 x 14 mm)
16-bit mixed-signal microcontroller · 16-bit RISC · 8 MHz · 48 KB · 2 KB · 12 bit · Yes · SPI and UART

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MSP430F449IPZ

✅ Drop-In
Texas Instruments
📦 100-pin LQFP (14 x 14 mm)
16-bit mixed-signal microcontroller · 8 MHz · 60 KB · 2 KB · 12 bits · 2 · SPI and UART · Integrated

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MSP430F4483IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 100-pin LQFP (14 x 14 mm)
Same 8 MHz clock and 48 KB flash with a 2 KB SRAM increase; verify ADC and LCD pin assignments

📋 חלופה להתייחסות (לא בקטלוג)

MSP430F4491IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 100-pin LQFP (14 x 14 mm)
Same 8 MHz MSP430x44x architecture and 100-pin LQFP package; SRAM is 30 KB higher while flash remains 48 KB

📋 חלופה להתייחסות (לא בקטלוג)

MSP430F4493IPZ

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 100-pin LQFP (14 x 14 mm)
Same 8 MHz MSP430x44x architecture and 100-pin LQFP package; SRAM is 62 KB higher while flash remains 48 KB

📋 חלופה להתייחסות (לא בקטלוג)

MSP430F4481IPZ דירוגים מרביים ומאפיינים חשמליים

Product Type 16-bit mixed-signal microcontroller
CPU Architecture MSP430 16-bit RISC
תדר שעון מקסימלי 8 MHz
Flash Memory 48 KB
SRAM 2 KB
ADC Resolution 12 bit
Supply Voltage Range 1.8 V to 3.6 V
Comparator Integrated
SPI Interface Integrated
UART Interface Integrated
LCD Driver Capacity 160 segments
Low-Power Modes 5 modes
מארז 100-pin LQFP (14 x 14 mm)
סוג הרכבה Surface mount
Carrier Type JEDEC tray
Tray Quantity 90 units

מדריך תצורת פינים של MSP430F4481IPZ 100-pin lqfp (14 x 14 mm)

תצורת פינים עבור MSP430F4481IPZ (מארזת 100-pin lqfp (14 x 14 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 100-pin lqfp (14 x 14 mm) עבור MSP430F4481IPZ

אין נתוני פריסת פינים מפורטים עבור MSP430F4481IPZ.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MSP430F4481IPZ מתאים עבור 6 יישוםs: Handheld Digital Multimeter, Portable Energy Meter, Industrial Process Monitor, Portable Medical Instrument, Battery-Powered Sensor Node, Segment-Display Control Panel.

🔧

Handheld Digital Multimeter

The MSP430F4481IPZ fits a handheld digital multimeter because it combines an 8 MHz 16-bit processor with a 12-bit ADC, comparator, and 160-segment LCD driver in one 100-pin LQFP package. The ADC can acquire measured voltage or current data, while the comparator supports threshold and input-range decisions. Integrating the LCD driver reduces the number of external display-interface components. Its 1.8 V to 3.6 V range and five low-power modes suit battery-powered operation, provided the front-end, reference, and input-divider design are optimized for the required measurement accuracy.

⚡

Portable Energy Meter

MSP430F4481IPZ is appropriate for a portable energy meter where an 8 MHz MCU must process samples while keeping standby consumption low. The 12-bit ADC can digitize conditioned current and voltage signals, the comparator can monitor thresholds, and SPI or UART can connect the measurement engine to a display, communications module, or data logger. The 2 KB SRAM supports buffering and working state, although applications requiring larger sample buffers should consider a higher-memory family member. The 160-segment LCD driver also supports direct display integration in compact meter housings.

🏭

Industrial Process Monitor

The MSP430F4481IPZ can serve as the control and measurement hub in an industrial process monitor. Its SPI and UART interfaces allow connection to sensors, remote transceivers, or local service ports, while the integrated ADC and comparator handle analog supervision. The 8 MHz 16-bit CPU provides adequate control-loop and display-update performance for many monitoring tasks. The device's 1.8 V to 3.6 V range accommodates regulated low-voltage rails, but the final design should account for industrial temperature, isolation, surge, and grounding requirements at the system level.

💊

Portable Medical Instrument

MSP430F4481IPZ is suitable for portable medical-instrument signal-conditioning and control functions that need mixed-signal conversion in a compact package. The 12-bit ADC measures conditioned sensor outputs, the comparator handles fast threshold events, and the low-power MSP430 CPU manages acquisition and display updates. The 160-segment LCD driver can present numeric results on a compact panel. Because medical designs require controlled power, accuracy, and validation processes, use the device's electrical limits as design inputs and complete the applicable application-level safety and regulatory assessment.

🧩

Battery-Powered Sensor Node

The MSP430F4481IPZ can implement a battery-powered sensor node that periodically converts analog measurements and reports results through SPI or UART. Its five low-power modes allow the firmware to remain active only during acquisition and communication, while the 12-bit ADC and comparator support sensor conditioning and threshold events. The 8 MHz core provides enough performance for local filtering and protocol handling in many small systems. Designers should use the datasheet wake-up and current specifications to calculate duty-cycle energy use and should size decoupling around the analog and digital supply requirements.

📺

Segment-Display Control Panel

MSP430F4481IPZ is well suited to a segment-display control panel because it combines a 160-segment LCD driver with an 8 MHz 16-bit CPU, 2 KB SRAM, and integrated analog peripherals. The display controller can update numerical readouts while firmware handles key input, threshold comparisons, and communication with other system modules. SPI and UART provide expansion paths for sensors, storage, or supervisory electronics. The LQFP package requires careful escape-routing because the LCD drive and analog pins can occupy much of the device perimeter, making verified pin assignment essential to avoid routing conflicts.

סיכום מוצרים מומלצים

MSP430F133IPMR Texas Instruments בשימוש ב-: Handheld Digital Multimeter, Portable Energy Meter, Industrial Process Monitor, Portable Medical Instrument, Battery-Powered Sensor Node, Segment-Display Control Panel MSP430F448IPZ Texas Instruments בשימוש ב-: Handheld Digital Multimeter, Industrial Process Monitor MSP430F449IPZ Texas Instruments בשימוש ב-: Portable Energy Meter MSP430F4483IPZ Same-package family option with additional SRAM בשימוש ב-: Portable Medical Instrument MSP430F4491IPZ Same-package option for larger working-memory requirements בשימוש ב-: Battery-Powered Sensor Node MSP430F4493IPZ Same-package family option with substantially more SRAM בשימוש ב-: Segment-Display Control Panel
What is the Texas Instruments MSP430F4481IPZ?
The Texas Instruments MSP430F4481IPZ is an ultra-low-power 16-bit mixed-signal microcontroller built around the MSP430 RISC CPU. According to the manufacturer product page, it operates at up to 8 MHz and includes 48 KB of flash, 2 KB of SRAM, a comparator, SPI and UART interfaces, and a 160-segment LCD driver. It is packaged in a 100-pin LQFP measuring 14 x 14 mm.
What are the key specifications of MSP430F4481IPZ that engineers should know?
The MSP430F4481IPZ combines an 8 MHz 16-bit RISC core with 48 KB of flash and 2 KB of SRAM. Its mixed-signal peripherals include a 12-bit ADC, comparator, SPI, UART, and a 160-segment LCD driver. The device operates from 1.8 V to 3.6 V and uses five low-power modes. According to the manufacturer datasheet, this combination supports portable measurement and low-power instrumentation designs.
Where can I download the MSP430F4481IPZ datasheet PDF?
The official MSP430F4481IPZ datasheet PDF is available from the Texas Instruments documentation link on this page. It covers the CPU architecture, memory, mixed-signal peripherals, LCD driver, electrical characteristics, pin descriptions, and package information. Use the manufacturer PDF for design sign-off because it is the controlling technical document for the MSP430x43x and MSP430x44x family.
Where can I find the MSP430F4481IPZ pinout?
The MSP430F4481IPZ pinout is found in the pin-description and terminal-configuration sections of the manufacturer datasheet. The device uses a 100-pin LQFP package, so PCB designers should assign every physical pin from the package drawing rather than relying on a simplified functional diagram. Pay particular attention to analog supply, ADC inputs, LCD drive outputs, communication signals, and the exposed power and ground requirements.
Where can I buy MSP430F4481IPZ online?
Use the Request a Quote form on this page to ask about MSP430F4481IPZ availability, authorized-channel sourcing, and the exact carrier configuration needed for your assembly. The selected MSP430F4481IPZ ordering code is supplied in a JEDEC tray, with a manufacturer-listed tray quantity of 90 units. Confirm the package suffix, quantity, and delivery schedule when submitting the request.
What is the price of MSP430F4481IPZ?
The current commercial terms for MSP430F4481IPZ are handled through the Request a Quote form on this page. Submit the required quantity, target carrier format, and delivery location to obtain an actionable quotation and lead time. The form avoids publishing a static unit price that could become stale while the device is moving through normal electronic-component distribution channels.
What is the lead time for MSP430F4481IPZ?
The current lead time for MSP430F4481IPZ should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, carrier configuration, and inventory conditions, so engineers should provide those details when requesting a quotation. The manufacturer lists the MSP430F4481IPZ device as active and identifies the tray configuration with 90 units per tray.
Is MSP430F4481IPZ in stock?
Stock status for MSP430F4481IPZ can change with procurement volume and packaging requirements. Use the Request a Quote form on this page to request current availability and an order commitment. Specify the required unit quantity and whether the JEDEC tray configuration is acceptable so the response reflects the production schedule relevant to your build.
MSP430F4481IPZ vs MSP430F448IPZ - which is better for a new design?
MSP430F4481IPZ and MSP430F448IPZ are both 8 MHz, 48 KB-flash MSP430 devices in the 100-pin LQFP family, so the decision depends on the exact memory and peripheral requirements of the intended device. The MSP430F4481 product page identifies 2 KB of SRAM and a 160-segment LCD driver. Check the pin and memory tables for both orderable part numbers before assigning one as the production alternative.
MSP430F4481IPZ vs MSP430F449IPZ - which is better for an LCD meter?
MSP430F449IPZ may be preferable when an LCD meter requires more SRAM than the 2 KB provided by MSP430F4481IPZ, because both devices belong to the MSP430x44x family and share the 8 MHz architecture and 160-segment LCD capability. Confirm SRAM capacity and exact pin functions in the manufacturer documentation before substituting. The choice should be based on working-memory requirements rather than package similarity alone.
When should I choose MSP430F4481IPZ over MSP430F4483IPZ?
Choose MSP430F4481IPZ when the design fits within its 2 KB of SRAM and does not require the additional memory of MSP430F4483IPZ. The MSP430F4481IPZ also provides the required 8 MHz clock, 12-bit ADC, comparator, SPI, UART, and 160-segment LCD driver in a 100-pin LQFP. Select the higher-memory family member when buffering samples, supporting larger firmware workloads, or running more complex application logic.
Is MSP430F4481IPZ suitable for a low-power meter?
MSP430F4481IPZ is suitable for a low-power meter because it combines a 16-bit MSP430 CPU, five low-power modes, integrated 12-bit ADC and comparator, and a 160-segment LCD driver. The 1.8 V to 3.6 V supply range supports compact battery-powered designs. Use the datasheet's power-mode timing and current characteristics to select the duty cycle and external analog front end.
What can replace MSP430F4481IPZ?
The closest documented replacements are same-manufacturer MSP430F448-family and MSP430F449-family devices in the 100-pin LQFP arrangement, subject to memory and pin-function verification. MSP430F448IPZ, MSP430F4483IPZ, MSP430F449IPZ, and MSP430F4491IPZ provide the closest family options identified for this design review. No cross-manufacturer part was confirmed as a pin-to-pin replacement, so firmware and board changes may be necessary outside the MSP430 family.
Is MSP430F4481IPZ the same as MSP430F449IPZ?
MSP430F4481IPZ and MSP430F449IPZ are not identical devices even though both are MSP430x44x-family microcontrollers with an 8 MHz architecture and 100-pin LQFP packaging. Their memory capacities and exact peripheral or pin assignments can differ, so board-level interchangeability cannot be assumed. Compare the ordering tables, SRAM capacity, ADC channels, LCD outputs, and pin descriptions before approving a substitution.
What is the best cross-manufacturer equivalent for MSP430F4481IPZ?
No cross-manufacturer equivalent has been confirmed as a true drop-in replacement for MSP430F4481IPZ. A valid equivalent would need the same 100-pin LQFP footprint, compatible pin functions, 1.8 V to 3.6 V operating range, and sufficiently similar ADC, LCD, communications, and memory resources. Because microcontrollers also require software-port and peripheral validation, use a documented TI cross-reference result or a complete engineering review rather than selecting by clock speed alone.

נתוני עזר הנדסיים עבור MSP430F4481IPZ — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MSP430F4481IPZ for a low-power 100-pin LQFP design that needs an 8 MHz MSP430 core, 48 KB of flash, 2 KB of SRAM, a 12-bit ADC, comparator, SPI, UART, and a 160-segment LCD driver. Choose MSP430F449IPZ or MSP430F4483IPZ when the same general architecture and package are needed but additional working memory simplifies buffering or application logic. Choose MSP430F4491IPZ or MSP430F4493IPZ for substantially larger SRAM requirements without changing the flash capacity. MSP430F448IPZ is a candidate for existing MSP430x44x designs, but its exact SRAM and terminal assignments must be checked. No cross-manufacturer device should be approved as drop-in without a full pin, electrical, peripheral, firmware, and timing review.

השוואה עם חלופות

פרמטר מוצר זה MSP430F448IPZ MSP430F449IPZ MSP430F4483IPZ MSP430F4491IPZ MSP430F4493IPZ
Package 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
CPU Architecture 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC
Maximum Clock Frequency 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz
Flash Memory 48 KB 48 KB 48 KB 48 KB 48 KB 48 KB
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V 1.8 V to 3.6 V
Low-Power Modes 5 modes 5 modes 5 modes 5 modes 5 modes 5 modes

מבדילים עיקריים

  • Higher working memory within the same 48 KB-flash family (לעומתMSP430F448IPZ)
  • Additional SRAM without increasing flash capacity (לעומתMSP430F449IPZ)
  • Substantially larger working-memory option in the same package (לעומתMSP430F4493IPZ)
  • Integrated mixed-signal and display resources (לעומתMSP430F133IPMR)

הערות תכנון

Use the manufacturer's 100-pin LQFP land pattern and assign every terminal from the pin-description table. Place the MCU close to the LCD connector when practical because many perimeter pins drive segment outputs; excessive LCD trace length can increase capacitance and complicate display settling. Keep the analog supply, ADC inputs, comparator inputs, and reference circuitry away from high-current LCD drive returns. A single solid ground plane with careful partitioning is generally preferable to fragmented return paths.

Decouple each required supply rail with the capacitance and placement specified in the manufacturer datasheet, and place the closest capacitor at the associated power pin. The 1.8 V to 3.6 V operating range does not remove the need to control ripple, startup sequencing, and load transients. If an ADC result must meet a defined error budget, separate analog and digital supply routing where practical and verify the reference voltage under active and low-power operating states.

Do not treat a shared LQFP outline as proof of electrical interchangeability. Before replacing MSP430F4481IPZ, compare ADC channels, comparator connections, LCD drive assignments, communication pins, supply pins, clock configuration, and interrupt vectors in the manufacturer documentation. Also review the SRAM requirement because firmware that relies on the 2 KB working-memory target may not fit in a lower-memory variant even when the PCB footprint is unchanged.

The LQFP package must dissipate the combined digital-processing, analog-conversion, communications, and LCD-drive load while maintaining the required junction-temperature margin. Estimate copper heat spreading using the package land pattern and board construction, then apply the manufacturer's junction-temperature and power-dissipation limits. LCD drive current can vary with segment count and lighting pattern, so include worst-case display loading rather than estimating from idle current.

The five low-power modes can reduce average energy use, but they can also alter clock stability, ADC availability, and wake-up timing. Configure the analog subsystem before each conversion when required, allow the specified settling time, and avoid assuming that a comparator or ADC result remains valid immediately after entering standby. Validate wake-up behavior with the actual sensor, display, and communication peripherals attached.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer identifies the MSP430F4481IPZ device as active and lists the MSP430F4481 family ordering code in a JEDEC tray. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MSP430F4481IPZ datasheet MSP430F4481IPZ pinout MSP430F4481IPZ datasheet pdf MSP430F4481IPZ equivalent MSP430F4481IPZ replacement MSP430F4481IPZ vs MSP430F449IPZ MSP430F4481IPZ 100 LQFP Texas Instruments MSP430F4481IPZ MSP430F4481IPZ 8MHz 48KB flash MSP430F4481IPZ price MSP430F4481IPZ stock MSP430F4481IPZ low power meter MSP430F4481IPZ 12-bit ADC MSP430F4481IPZ LCD controller

רכיבים ומונחים קשורים

Texas Instruments MSP430F4481IPZ MSP430F448IPZ MSP430F449IPZ MSP430F4483IPZ MSP430F4491IPZ MSP430F4493IPZ MSP430F133IPMR MSP430 CPU 16-bit RISC architecture mixed-signal microcontroller ultra-low-power microcontroller 12-bit ADC comparator SPI UART 160-segment LCD driver flash memory SRAM low-power modes LQFP-100 surface-mount package JEDEC tray battery-powered instrumentation industrial process monitoring
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר