MSP430F4481IPZ - 8MHz 48KB Flash MCU | Texas Instruments
부품 번호: MSP430F4481IPZ ✓ 활성MSP430F4481IPZ 개요
An ultra-low-power microcontroller is a semiconductor designed to execute firmware while minimizing energy consumption during active operation, standby, and off states. The MSP430 architecture combines a 16-bit RISC processor, 16-bit registers, and constant generators within a mixed-signal system-on-chip hierarchy. This makes it suitable for battery-powered instruments, industrial meters, and embedded systems that require analog measurement and segmented-display control without separate peripheral ICs.
The principal features include an 8 MHz maximum clock, 48 KB flash, 2 KB SRAM, a 12-bit analog-to-digital converter, comparator, SPI and UART interfaces, and support for a 160-segment LCD. The integrated analog and display resources reduce board area and external component count. A 1.8 V to 3.6 V operating range also supports low-voltage portable systems.
The MSP430 CPU uses a 16-bit RISC architecture with 16-bit registers and constant generators to improve code efficiency. The mixed-signal feature set connects the ADC and comparator to general-purpose processing, while the LCD driver supports meter and panel-display applications. The device also provides five low-power operating modes for reducing energy use between measurement events.
Typical uses include handheld multimeters, smart energy meters, industrial process monitors, portable medical instruments, and embedded measurement systems with LCD displays. SPI and UART connectivity allows the controller to communicate with external sensors, transceivers, or data loggers, while the LCD driver simplifies direct segment-display control.
For PCB implementation, use the manufacturer's 100-pin LQFP land pattern and follow the pin-description table in the datasheet when assigning power, ground, analog, and communication functions. Pay particular attention to analog supply routing, ADC input conditioning, LCD segment drive current, and decoupling placement to preserve measurement performance.
This page combines the MSP430F4481IPZ specifications, application guidance, package information, and verified drop-in alternatives to support component selection, schematic design, PCB layout, and sourcing decisions without duplicating the raw manufacturer datasheet tables.
드롭인 대체품: MSP430F4481IPZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MSP430F4481IPZ (동일 폼 팩터 및 풋프린트) — 차이점: ADC Resolution, Flash Memory, Package, CPU Architecture.
MSP430F448IPZ
✅ 드롭인가격 문의
데이터시트 보기 →MSP430F449IPZ
✅ 드롭인가격 문의
데이터시트 보기 →MSP430F4483IPZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MSP430F4491IPZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MSP430F4493IPZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MSP430F4481IPZ 최대 정격 & 전기적 특성
| Product Type | 16-bit mixed-signal microcontroller |
| CPU Architecture | MSP430 16-bit RISC |
| 최대 클록 주파수 | 8 MHz |
| Flash Memory | 48 KB |
| SRAM | 2 KB |
| ADC Resolution | 12 bit |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Comparator | Integrated |
| SPI Interface | Integrated |
| UART Interface | Integrated |
| LCD Driver Capacity | 160 segments |
| Low-Power Modes | 5 modes |
| 패키지 | 100-pin LQFP (14 x 14 mm) |
| 실장 유형 | Surface mount |
| Carrier Type | JEDEC tray |
| Tray Quantity | 90 units |
MSP430F4481IPZ 100-pin lqfp (14 x 14 mm) 핀 구성 가이드
MSP430F4481IPZ(100-pin lqfp (14 x 14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MSP430F4481IPZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MSP430F4481IPZ 적합 용도: 6 애플리케이션s: Handheld Digital Multimeter, Portable Energy Meter, Industrial Process Monitor, Portable Medical Instrument, Battery-Powered Sensor Node, Segment-Display Control Panel.
Handheld Digital Multimeter
The MSP430F4481IPZ fits a handheld digital multimeter because it combines an 8 MHz 16-bit processor with a 12-bit ADC, comparator, and 160-segment LCD driver in one 100-pin LQFP package. The ADC can acquire measured voltage or current data, while the comparator supports threshold and input-range decisions. Integrating the LCD driver reduces the number of external display-interface components. Its 1.8 V to 3.6 V range and five low-power modes suit battery-powered operation, provided the front-end, reference, and input-divider design are optimized for the required measurement accuracy.
추천
Portable Energy Meter
MSP430F4481IPZ is appropriate for a portable energy meter where an 8 MHz MCU must process samples while keeping standby consumption low. The 12-bit ADC can digitize conditioned current and voltage signals, the comparator can monitor thresholds, and SPI or UART can connect the measurement engine to a display, communications module, or data logger. The 2 KB SRAM supports buffering and working state, although applications requiring larger sample buffers should consider a higher-memory family member. The 160-segment LCD driver also supports direct display integration in compact meter housings.
추천
Industrial Process Monitor
The MSP430F4481IPZ can serve as the control and measurement hub in an industrial process monitor. Its SPI and UART interfaces allow connection to sensors, remote transceivers, or local service ports, while the integrated ADC and comparator handle analog supervision. The 8 MHz 16-bit CPU provides adequate control-loop and display-update performance for many monitoring tasks. The device's 1.8 V to 3.6 V range accommodates regulated low-voltage rails, but the final design should account for industrial temperature, isolation, surge, and grounding requirements at the system level.
추천
Portable Medical Instrument
MSP430F4481IPZ is suitable for portable medical-instrument signal-conditioning and control functions that need mixed-signal conversion in a compact package. The 12-bit ADC measures conditioned sensor outputs, the comparator handles fast threshold events, and the low-power MSP430 CPU manages acquisition and display updates. The 160-segment LCD driver can present numeric results on a compact panel. Because medical designs require controlled power, accuracy, and validation processes, use the device's electrical limits as design inputs and complete the applicable application-level safety and regulatory assessment.
추천
Battery-Powered Sensor Node
The MSP430F4481IPZ can implement a battery-powered sensor node that periodically converts analog measurements and reports results through SPI or UART. Its five low-power modes allow the firmware to remain active only during acquisition and communication, while the 12-bit ADC and comparator support sensor conditioning and threshold events. The 8 MHz core provides enough performance for local filtering and protocol handling in many small systems. Designers should use the datasheet wake-up and current specifications to calculate duty-cycle energy use and should size decoupling around the analog and digital supply requirements.
추천
Segment-Display Control Panel
MSP430F4481IPZ is well suited to a segment-display control panel because it combines a 160-segment LCD driver with an 8 MHz 16-bit CPU, 2 KB SRAM, and integrated analog peripherals. The display controller can update numerical readouts while firmware handles key input, threshold comparisons, and communication with other system modules. SPI and UART provide expansion paths for sensors, storage, or supervisory electronics. The LQFP package requires careful escape-routing because the LCD drive and analog pins can occupy much of the device perimeter, making verified pin assignment essential to avoid routing conflicts.
추천
추천 제품 요약
엔지니어링 참조 데이터: MSP430F4481IPZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MSP430F448IPZ | MSP430F449IPZ | MSP430F4483IPZ | MSP430F4491IPZ | MSP430F4493IPZ |
|---|---|---|---|---|---|---|
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Architecture | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC | 16-bit MSP430 RISC |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Flash Memory | 48 KB | 48 KB | 48 KB | 48 KB | 48 KB | 48 KB |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Low-Power Modes | 5 modes | 5 modes | 5 modes | 5 modes | 5 modes | 5 modes |
주요 차별점
- Higher working memory within the same 48 KB-flash family (vs MSP430F448IPZ)
- Additional SRAM without increasing flash capacity (vs MSP430F449IPZ)
- Substantially larger working-memory option in the same package (vs MSP430F4493IPZ)
- Integrated mixed-signal and display resources (vs MSP430F133IPMR)
설계 노트
Use the manufacturer's 100-pin LQFP land pattern and assign every terminal from the pin-description table. Place the MCU close to the LCD connector when practical because many perimeter pins drive segment outputs; excessive LCD trace length can increase capacitance and complicate display settling. Keep the analog supply, ADC inputs, comparator inputs, and reference circuitry away from high-current LCD drive returns. A single solid ground plane with careful partitioning is generally preferable to fragmented return paths.
Decouple each required supply rail with the capacitance and placement specified in the manufacturer datasheet, and place the closest capacitor at the associated power pin. The 1.8 V to 3.6 V operating range does not remove the need to control ripple, startup sequencing, and load transients. If an ADC result must meet a defined error budget, separate analog and digital supply routing where practical and verify the reference voltage under active and low-power operating states.
Do not treat a shared LQFP outline as proof of electrical interchangeability. Before replacing MSP430F4481IPZ, compare ADC channels, comparator connections, LCD drive assignments, communication pins, supply pins, clock configuration, and interrupt vectors in the manufacturer documentation. Also review the SRAM requirement because firmware that relies on the 2 KB working-memory target may not fit in a lower-memory variant even when the PCB footprint is unchanged.
The LQFP package must dissipate the combined digital-processing, analog-conversion, communications, and LCD-drive load while maintaining the required junction-temperature margin. Estimate copper heat spreading using the package land pattern and board construction, then apply the manufacturer's junction-temperature and power-dissipation limits. LCD drive current can vary with segment count and lighting pattern, so include worst-case display loading rather than estimating from idle current.
The five low-power modes can reduce average energy use, but they can also alter clock stability, ADC availability, and wake-up timing. Configure the analog subsystem before each conversion when required, allow the specified settling time, and avoid assuming that a comparator or ADC result remains valid immediately after entering standby. Validate wake-up behavior with the actual sensor, display, and communication peripherals attached.
규정 준수 정보
The manufacturer identifies the MSP430F4481IPZ device as active and lists the MSP430F4481 family ordering code in a JEDEC tray. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.