NXP Semiconductors

PCA9543APW 2-Channel I2C Switch with Interrupt and Reset | NXP

MPN: PCA9543APW ✓ פעיל
2.3 V to 5.5 V Vdss TSSOP (PW) Package
כמות הזמנה מינימלית: 1 |

PCA9543APW סקירה

The NXP Semiconductors PCA9543APW is a 2-channel I2C-bus switch with interrupt logic and reset, operating from 2.3 V to 5.5 V in a 14-pin TSSOP PW package. The device allows two independently controlled I2C target channels to connect to a common upstream bus, helping designers isolate unused devices, manage shared-bus addressing, and reduce unnecessary bus loading. It supports voltage translation, provides an interrupt output for downstream-device status monitoring, and includes a reset input for coordinated system startup.

An I2C switch, also called an I2C bus switch or multiplexer, is an interface IC that routes serial data and clock lines between one controller-side bus and multiple downstream ports. In the hierarchy of electronic components, an I2C switch belongs to the interface-controller category, then to the broader interface IC and logic IC families. Its purpose is to make multiple compatible I2C peripherals easier to interconnect on a shared two-wire bus while preserving electrical and protocol compatibility.

The PCA9543APW provides two switch channels, interrupt logic, and a reset function. Its 2.3 V to 5.5 V operating range supports both common low-voltage embedded systems and higher-voltage I2C environments. The TSSOP-14 surface-mount package is suitable for compact PCB layouts, while the interrupt and reset controls support systems requiring peripheral detection, fault recovery, or controlled power-up behavior. These characteristics make the device useful in embedded control, sensor networking, communications equipment, and general-purpose I2C expansion designs.

Architecturally, the PCA9543APW separates the upstream SDA and SCL path from the two downstream channels. Downstream ports can be enabled or isolated according to system requirements, reducing loading and helping prevent unintended communication with devices that share the same bus. The interrupt function provides a hardware indication of activity on a downstream channel, allowing the host controller to service only the relevant peripheral. The reset input provides a common mechanism for returning the switch to a defined operating state during system initialization or recovery.

Typical applications include I2C sensor aggregation, industrial monitoring modules, programmable power systems, communications equipment, and embedded controllers with multiple I2C peripherals. In a sensor-hub design, the upstream bus can remain connected while one downstream branch is isolated during reset or firmware updates. In a multi-domain instrument, the interrupt output can indicate that a downstream device has generated an event without requiring continuous polling of every branch.

A key design consideration is ensuring that the selected channel states match the intended bus topology. Review the manufacturer pin and connection information before assigning SDA, SCL, reset, interrupt, and enable functions. Account for pull-up resistor placement, bus capacitance, voltage levels, and the power-up relationship between the controller and downstream devices. These checks are essential because the device can simplify routing while still requiring correct bus-level implementation.

This product overview combines the manufacturer product information with practical design guidance, drop-in replacement context, pin and package details, and application-specific selection considerations. It is intended to help engineers evaluate the PCA9543APW for I2C bus isolation, voltage-level interfacing, and multi-peripheral system architectures without obscuring the important implementation trade-offs.

חלופות תחליף ישיר עבור PCA9543APW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

PCA9543APW

✅ Drop-In
NXP Semiconductors
📦 TSSOP-14 (PW)
2-channel I2C-bus switch · 2 channels · 2.3 V to 5.5 V · Yes · Yes · Supported · TSSOP (PW) · 14 pins

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

TCA9543APWR

✅ Drop-In
📦 TSSOP-14 (PW)
Same 2-channel I2C-switch positioning and 14-pin PW format; interrupt, reset, enable, and timing details must be checked against the NXP device

📋 חלופה להתייחסות (לא בקטלוג)

PCA9543APWRG4

✅ Drop-In
📦 TSSOP-14 (PW)
Same PCA9543 function in the 14-pin PW format; maximum power dissipation is listed as 400 mW, with ordering and grade details requiring verification

📋 חלופה להתייחסות (לא בקטלוג)

PCA9543APW דירוגים מרביים ומאפיינים חשמליים

Product Type 2-channel I2C-bus switch
Number of Channels 2 channels
Operating Supply Voltage Range 2.3 V to 5.5 V
Interrupt Function Yes
Reset Function Yes
Voltage Translation Supported
Package Type TSSOP (PW)
מספר פינים 14 pins
טווח טמפרטורת פעולה -40 °C to +85 °C
סוג הרכבה Surface mount
Bus Interface I2C/SMBus
Upstream Ports 1
Downstream Ports 2
Maximum Power Dissipation 400 mW
RoHS Compliance unknown
REACH Compliance unknown

מדריך תצורת פינים של PCA9543APW tssop (pw)

תצורת פינים עבור PCA9543APW (מארזת tssop (pw)). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת tssop (pw) עבור PCA9543APW

אין נתוני פריסת פינים מפורטים עבור PCA9543APW.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCA9543APW מתאים עבור 6 יישוםs: Industrial Sensor Aggregation, Embedded Communications Equipment, Programmable Power Control, Test and Measurement Front Ends, IoT Sensor Gateways, Multi-Sensor Monitoring Systems.

🏭

Industrial Sensor Aggregation

The PCA9543APW fits industrial sensor-aggregation boards that connect several I2C sensors to a single embedded controller. Its 2-channel architecture lets the host isolate one downstream branch while communicating with another, reducing unnecessary loading during diagnostics or firmware updates. The 2.3 V to 5.5 V operating range supports common industrial logic environments, while interrupt logic can identify activity on a monitored branch. Confirm pull-up values, bus capacitance, and channel state during the device’s 2.3 V to 5.5 V power-up sequence.

🌐

Embedded Communications Equipment

The PCA9543APW is useful in embedded communications equipment that connects address-based I2C transceivers, memory devices, or configuration peripherals to a host bus. Two selectable downstream channels help organize devices that require isolation during initialization or maintenance. Its interrupt output can prompt the controller to service a downstream event, and reset supports a deterministic startup state. The TSSOP-14 package also keeps routing compact, provided that trace lengths and pull-up placement meet the applicable I2C timing requirements.

⚡

Programmable Power Control

The PCA9543APW can organize I2C-controlled power-management peripherals in programmable power systems. Separate downstream channels allow the controller to isolate one group of converters or monitors while retaining access to another group. The 2.3 V to 5.5 V range covers common control-rail voltages, while reset and interrupt provide useful coordination points. Designers should verify that every downstream device remains compatible with the selected logic level and that channel isolation does not remove a device’s required pull-up path.

🔧

Test and Measurement Front Ends

The PCA9543APW can organize low-power I2C sensors and control registers in test and measurement front ends. A host instrument can select a downstream channel for configuration while keeping another channel isolated, reducing unintended communication between attached modules. Interrupt logic can indicate peripheral activity, and reset provides a common recovery mechanism. For high-speed or long-cable installations, evaluate capacitance, pull-up strength, and signal-integrity margins rather than assuming that logical compatibility guarantees reliable communication.

🧩

IoT Sensor Gateways

The PCA9543APW is appropriate for compact IoT sensor gateways that need to connect multiple I2C peripherals without allowing every device to remain active on the common bus. Its two channels support branch isolation, while the interrupt output can wake or direct host-controller attention toward a downstream event. The 14-pin TSSOP package supports space-constrained boards and the 2.3 V to 5.5 V range accommodates several embedded platforms. Validate standby behavior, pull-up placement, and power-domain sequencing before deploying the switch across independently switched domains.

📱

Multi-Sensor Monitoring Systems

The PCA9543APW can support monitoring systems that combine several I2C sensing devices with a common host. Independent channel selection helps avoid simultaneous access to isolated branches and provides a controlled path for firmware recovery. The interrupt function is useful when a downstream sensor must request service, while reset establishes a known state after power changes. Check the master clock rate against total bus capacitance and ensure that disabled channels do not leave required pull-ups or powered devices in an undefined state.

סיכום מוצרים מומלצים

PCA9543APW NXP Semiconductors בשימוש ב-: Industrial Sensor Aggregation, Embedded Communications Equipment, Programmable Power Control, Programmable Power Control, Test and Measurement Front Ends, IoT Sensor Gateways, Multi-Sensor Monitoring Systems PCA9544APW/G-T Related four-channel I2C switch option בשימוש ב-: Industrial Sensor Aggregation, IoT Sensor Gateways PCA9545APWT Related two-channel I2C switch family option בשימוש ב-: Embedded Communications Equipment, Multi-Sensor Monitoring Systems TCA9543APWR Drop-in comparison candidate בשימוש ב-: Test and Measurement Front Ends
What is the PCA9543APW?
The PCA9543APW is a 2-channel I2C-bus switch with interrupt logic and reset. According to the NXP product page, it operates from 2.3 V to 5.5 V and provides voltage translation for I2C/SMBus systems. The device is packaged in a 14-pin TSSOP PW package and is intended for isolating or connecting multiple downstream I2C peripherals to a common upstream bus.
What are the key specifications of PCA9543APW that engineers should know?
The PCA9543APW provides 2 I2C switch channels, a 2.3 V to 5.5 V operating range, interrupt logic, reset control, and voltage translation in a 14-pin TSSOP package. Its operating temperature range is -40 °C to +85 °C. According to NXP, the maximum power dissipation is 400 mW. The main engineering considerations are bus loading, pull-up placement, channel-state control, and logic-level compatibility.
Where can I download the PCA9543APW datasheet PDF?
The official PCA9543APW product information and datasheet are available from the NXP product page at https://www.nxp.com/part/PCA9543APW. The page identifies the device as a 2-channel I2C-bus switch with interrupt logic and reset. Use the manufacturer document for the authoritative pin description, electrical limits, timing characteristics, and recommended application circuit before finalizing a PCB layout.
Where can I find the PCA9543APW pinout?
The PCA9543APW pin assignment is shown in the NXP manufacturer datasheet and package information for the 14-pin TSSOP PW package. Use that pin-description table when routing SDA, SCL, reset, interrupt, and channel-control connections. The public search material confirms the 14-pin package but does not reproduce every pin name, so consult the manufacturer document before assigning tracks.
Where can I buy PCA9543APW online?
Use the Request a Quote form on this page to request PCA9543APW availability, order quantities, and lead time for your project. The form is the appropriate route for current commercial terms because inventory and quotations can change. Confirm the exact PCA9543APW ordering code, 14-pin TSSOP package, delivery format, and required quantity before authorizing an order.
What is the price of PCA9543APW?
Submit the Request a Quote form on this page for current PCA9543APW pricing and order terms. A starting-price listing without an explicit quantity-break schedule does not establish a dependable tiered quotation, so no static price schedule is reproduced here. Include your required quantity, packaging preference, target date, and delivery location so the quotation can be prepared accurately.
What is the lead time for PCA9543APW?
Request the current lead time for PCA9543APW through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing availability, packaging, and delivery location, so it should be confirmed for each procurement request. The manufacturer lists the part as active, but that status alone does not guarantee immediate allocation for a specific order.
Is PCA9543APW in stock?
The PCA9543APW is listed as active by NXP, while live stock levels change by seller and region. Use the Request a Quote form on this page to confirm current allocation for the exact 14-pin TSSOP ordering code and requested quantity. Provide a target delivery date so the available schedule can be evaluated rather than relying on a static stock statement.
What can replace the PCA9543APW?
The PCA9543APW can be evaluated against pin-compatible devices such as the Texas Instruments PCA9543APW and TCA9543APWR, subject to a final pin-function and electrical check. The clearest drop-in match is TI PCA9543APW because it uses the same PW package designation and 14-pin configuration. Confirm enable behavior, interrupt polarity, reset response, voltage levels, and timing before replacing the NXP device.
Is the Texas Instruments PCA9543APW the same as the NXP PCA9543APW?
The Texas Instruments PCA9543APW is a closely matched 2-channel I2C/SMBus switch offered in the same 14-pin PW package, with a stated operating range of 2.3 V to 5.5 V. TI describes it as a drop-in replacement with upgraded functionality relative to the compared device. Confirm the detailed pin functions, reset timing, interrupt behavior, and electrical limits against the NXP datasheet.
What is the best drop-in replacement for PCA9543APW?
The TI PCA9543APW is the strongest documented drop-in candidate because it uses the same 14-pin PW package and implements the same 2-channel I2C/SMBus-switch function. The TI product page lists a 2.3 V to 5.5 V operating range, interrupt, reset, and voltage translation. Confirm pin-level polarity and timing before production use. Other candidates should not be approved solely from package similarity.
PCA9543APW vs PCA9543APW from Texas Instruments: which is better?
Choose the Texas Instruments PCA9543APW when its documented pinout, timing, and electrical behavior satisfy the target design because it is presented as a drop-in replacement with upgraded functionality. Both devices are 14-pin PW parts offering two-channel I2C/SMBus switching, interrupt, reset, and voltage translation. The deciding factors are detailed pin-function verification, lifecycle needs, regional sourcing, and device-specific qualification rather than headline feature differences.
PCA9543APW vs TCA9543APWR: which is better for an embedded controller?
The PCA9543APW and TCA9543APWR are both associated with the 2-channel I2C-switch function and a 14-pin PW package format, but they should not be approved as interchangeable without checking the pin descriptions. Compare reset polarity, interrupt behavior, channel enable logic, voltage thresholds, and timing. For the closest documented route, the TI PCA9543APW product family offers clearer replacement positioning.
When should I choose PCA9543APW instead of a PCA9545-series switch?
Choose the PCA9543APW when the design specifically needs a 2-channel I2C switch with interrupt and reset in the 14-pin PW package. A PCA9545-family device may fit a different channel, interrupt, or packaging architecture and should not be assumed to share the same footprint. Verify the exact candidate’s pin count, pin functions, operating range, and downstream-channel count before using it as a substitute.
Is the PCA9543APW suitable for industrial sensor and control systems?
The PCA9543APW is suitable for many industrial sensor and control systems that use a 2.3 V to 5.5 V I2C/SMBus interface. Its two channels, interrupt logic, reset control, and -40 °C to +85 °C operating range support bus partitioning, event detection, and coordinated startup. The system still requires proper surge, grounding, pull-up, and environmental-protection measures beyond the IC itself.
How should PCA9543APW be used with I2C pull-up resistors?
The PCA9543APW should be used with pull-up resistors arranged so that SDA and SCL operate at the correct logic level on every connected segment. Disable unused downstream channels where appropriate to prevent unintended loading, and avoid placing pull-ups that force incompatible voltage levels onto a translated branch. Confirm capacitor loading and rise-time requirements against the manufacturer timing data for the selected bus speed.

נתוני עזר הנדסיים עבור PCA9543APW — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the NXP PCA9543APW when the design requires a 2-channel I2C switch with interrupt, reset, voltage translation, and a 14-pin TSSOP footprint. The Texas Instruments PCA9543APW is the preferred documented drop-in candidate when its detailed timing, polarity, and pin behavior satisfy the system requirements; it uses the same PW package and headline operating range. Consider TCA9543APWR only after verifying its interrupt, reset, enable, and electrical details. Do not select the four-channel PCA9544APW/G-T merely for a similar bus-switch role because its channel count and control requirements differ. For any substitution, confirm package dimensions, pin functions, logic thresholds, pull-up strategy, reset sequencing, and the exact firmware-controlled channel states.

השוואה עם חלופות

פרמטר מוצר זה PCA9543APW TCA9543APWR PCA9543APWRG4
Brand NXP Semiconductors Texas Instruments Texas Instruments NXP Semiconductors
Package TSSOP-14 (PW) TSSOP-14 (PW) TSSOP-14 (PW) TSSOP-14 (PW)
Function 2-channel I2C-bus switch 2-channel 2.3 V to 5.5 V I2C/SMBus switch 2-channel I2C switch 2-channel I2C-bus switch
Channel Count 2 channels 2 channels 2 channels 2 channels

מבדילים עיקריים

  • Direct same-package replacement identified by the manufacturer (לעומתPCA9543APW from Texas Instruments)
  • Channel topology matches the target without increasing port count (לעומתPCA9544APW/G-T)
  • Interrupt and reset functions are incorporated into the 14-pin device (לעומתTCA9543APWR)

הערות תכנון

Confirm that the upstream and downstream logic levels remain within the device’s 2.3 V to 5.5 V operating range and support the intended voltage-translation configuration. Place the required bus pull-up resistors at the correct physical locations so that disconnected or disabled branches do not impose an unintended voltage on a powered segment. Review reset behavior during power-up to prevent partial bus activity or contention between master and peripheral devices.

Route SDA and SCL from the upstream controller to the PCA9543APW and onward to each downstream branch with short, continuous traces. Keep pull-up components close to the devices that establish each voltage domain, and avoid long stubs on disabled channels. Review trace capacitance and pull-up strength against the intended I2C clock rate, especially when sensor cables or long PCB routes are present.

Do not approve a replacement using package appearance alone. Compare the complete pin descriptions, interrupt polarity, reset behavior, channel-enable logic, electrical thresholds, and timing characteristics. The documented TI PCA9543APW and TCA9543APWR are closest candidates, but each design must still verify that software control and external pull-up arrangements remain valid after substitution.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available product listings identify the device as active but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than assumed.

חיפושים קשורים

PCA9543APW datasheet PCA9543APW pinout PCA9543APW datasheet pdf PCA9543APW equivalent PCA9543APW replacement PCA9543APW drop-in replacement PCA9543APW vs PCA9543APW TI PCA9543APW TSSOP-14 footprint PCA9543APW price PCA9543APW stock NXP PCA9543APW PCA9543APW application circuit

רכיבים ומונחים קשורים

NXP Semiconductors PCA9543APW Texas Instruments PCA9543APW TI TCA9543APWR PCA9543APWRG4 PCA9544APW/G-T PCA9545APWT I2C-bus switch I2C switch bus multiplexer interface IC logic IC semiconductor SMBus voltage translation interrupt logic reset control TSSOP-14 PW package surface mount SMD pull-up resistor industrial sensor embedded controller
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר