Microchip Technology

PIC16F883-E/ML - 20MHz 8-Bit Flash MCU | Microchip Technology

MPN: PIC16F883-E/ML ✓ פעיל
2.5 V to 5 V Vdss 28-pin QFN (6x6 mm) with exposed pad Package 20 MHz Speed 7 KB (4K x 14) Memory
כמות הזמנה מינימלית: 1 |

PIC16F883-E/ML סקירה

The Microchip Technology PIC16F883-E/ML is an 8-bit CMOS Flash PIC microcontroller with a 20 MHz operating speed, 7 KB of program memory organized as 4K x 14, and 25 I/O pins in a 28-pin QFN package with an exposed pad. The -E designation identifies the extended-temperature product grade, while the /ML suffix identifies the 6x6 mm QFN package and tube packaging. The device supports operation from 2.5 V to 5 V and combines a compact RISC instruction set with embedded analog and timing peripherals.

A PIC microcontroller is an 8-bit embedded-control IC that integrates a processor core, Flash program memory, data memory, EEPROM, I/O ports, and peripherals into one device. PIC16F883 belongs to the PIC16 family, a broad microcontroller platform used for industrial control, instrumentation, consumer products, and small embedded systems. Its architecture uses a compact instruction set and a unified programming environment, allowing control logic, sensor acquisition, and output switching to be handled in one inexpensive component.

The PIC16F883-E/ML includes 7 KB of Flash program memory, 256 bytes of EEPROM data memory according to the manufacturer product description, self-programming, and a 20 MHz maximum clock speed. The peripheral set includes two comparators, 11 channels of 10-bit analog-to-digital conversion, and capture, compare, and PWM functions. These resources allow the MCU to monitor analog inputs, generate timing signals, control actuators, and implement embedded control logic without requiring a separate analog converter or timer IC.

The device uses the PIC16 enhanced Flash architecture and is described by Microchip as having only 35 single-word instructions. Self-programming allows firmware to be updated in the field, while EEPROM provides nonvolatile storage for calibration constants, configuration values, counters, and diagnostic records. The 25 available I/O pins support digital interfaces, control signals, and peripheral multiplexing in compact embedded products.

Typical applications include industrial sensor nodes, temperature controllers, motor and relay control boards, power-supply monitoring, instrumentation front ends, LED lighting controllers, and compact consumer equipment. The 10-bit ADC is particularly useful for monitoring potentiometers, resistive sensors, dividers, and analog supply rails, while the PWM-capable peripherals simplify dimming, actuator drive, and periodic waveform generation.

Designers should preserve the exposed-pad thermal and electrical requirements of the QFN package, place decoupling capacitors close to the supply pins, and follow the manufacturer pin-description table when assigning analog and digital functions. Firmware should also account for the device’s 10-bit ADC resolution, peripheral multiplexing, and the operating limits specified in the PIC16F883 datasheet.

This product page combines the manufacturer’s device description with distributor package and ordering information, focused engineering guidance, and practical application context. It helps engineers identify the correct 28-QFN variant, plan programming and decoupling, and assess the PIC16F883-E/ML for compact embedded-control designs.

חלופות תחליף ישיר עבור PIC16F883-E/ML — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PIC16F883-E/ML (אותו גורם צורה וטביעת רגל) — שונים ב ADC, Package, Timers, Program Memory (Flash), Operating Temperature.

Microchip Technology
ADC: 10-bit, integrated
Program Memory (Flash): 3.5 KB (2K x 14 words)
Microchip Technology
ADC: 10-bit, 14 channels
Package: 28-pin QFN (6x6 mm), 'ML' suffix
Timers: 2 x 8-bit + 1 x 16-bit
Microchip Technology
ADC: 10-bit, up to 11 channels
Package: 28-QFN (6x6 mm) with exposed pad
Timers: 3 (Timer0, Timer1, Timer2)
Microchip Technology
ADC: 11-channel, 10-bit
Package: 28-pin QFN (6 x 6 mm), ML suffix
Timers: Timer0, Timer1, Timer2
Microchip Technology
ADC: 11 channels x 10-bit
Package: 28-pin QFN (6x6 mm)
Timers: 2x 8-bit + 1x 16-bit
Microchip Technology
ADC: 10-bit, up to 14 channels
Package: QFN-44 (ML) 8x8 mm
Timers: 2 x 8-bit, 1 x 16-bit

PIC16F883-I/ML

✅ Drop-In
Microchip Technology
📦 28-pin QFN (6x6 mm) with exposed pad
PIC16 8-bit RISC · 7 KB (4K x 14 words) · 256 B (data sheet snippet says 256 RAM) · 256 B · 20 MHz · 2.0 V to 5.5 V · 25 · 10-bit, 14 channels

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PIC16F883T-I/ML

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 28-pin QFN (6x6 mm) with exposed pad
PIC16F mid-range · 8-bit PIC RISC · 35 single-word instructions · 7 KB (4K x 14) · 256 bytes · 368 bytes · 20 MHz · 2.0 V to 5.5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PIC16F882-I/ML

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin QFN (6x6 mm) with exposed pad
Same 28-QFN PIC16F88x footprint; device-specific flash and peripheral resources differ from PIC16F883

📋 חלופה להתייחסות (לא בקטלוג)

PIC16F886-I/ML

✅ Drop-In
Microchip Technology
📦 28-pin QFN (6x6 mm) with exposed pad
PIC16 Enhanced Mid-Range 8-bit · 14 KB (8K x 14 words) · 368 bytes · 256 bytes · 20 MHz · 2.0 V to 5.5 V · 25 · 11 channels x 10-bit

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PIC16F887-I/ML

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 28-pin QFN (6x6 mm) with exposed pad
PIC16 8-bit RISC (Harvard) · 14 KB (8K x 14 words) · 368 bytes · 256 bytes · 20 MHz (5 MIPS) · 2.0 V to 5.5 V · 36 · 10-bit, up to 14 channels

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PIC16F883-E/ML דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit CMOS Flash PIC microcontroller
תדר שעון מקסימלי 20 MHz
Program Memory 7 KB (4K x 14)
Data Memory 256 bytes
EEPROM Data Memory 256 bytes
Supply Voltage Range 2.5 V to 5 V
Number of I/O Pins 25
מארז 28-pin QFN (6x6 mm) with exposed pad
Architecture PIC 8-bit RISC core
Instruction Set 35 single-word instructions
Self-Programming Supported
Comparator Count 2
ADC Resolution 10 bit
ADC Channels 11
Capture/Compare/PWM Resources 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM
Programming and Debug Support In-circuit programming and ICD support

מדריך תצורת פינים של PIC16F883-E/ML 28-pin qfn (6x6 mm) with exposed pad

תצורת פינים עבור PIC16F883-E/ML (מארזת 28-pin qfn (6x6 mm) with exposed pad). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 28-pin qfn (6x6 mm) with exposed pad עבור PIC16F883-E/ML

אין נתוני פריסת פינים מפורטים עבור PIC16F883-E/ML.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PIC16F883-E/ML מתאים עבור 6 יישוםs: Industrial Sensor Monitoring, Temperature and Process Control, Motor and Relay Control, Power-Supply Monitoring, Instrumentation Front End, LED Lighting Controller.

🏭

Industrial Sensor Monitoring

The PIC16F883-E/ML fits compact industrial sensor nodes because its 11-channel, 10-bit ADC can acquire analog inputs while the 20 MHz processor handles filtering, threshold decisions, and control logic. The 256-byte EEPROM preserves calibration values and counters without repeated writes to Flash. With 25 I/O pins, the device can connect digital sensors, status indicators, and an actuator while operating from a 2.5 V, 3.3 V, or 5 V rail. The main design consideration is providing clean analog and digital grounds, decoupling the supply pins, and verifying sensor signals remain within the ADC input limits.

🌡️

Temperature and Process Control

The PIC16F883-E/ML is appropriate for temperature controllers because its 10-bit ADC provides enough resolution for many resistive sensors, while the capture, compare, and PWM resources can drive heaters, cooling outputs, or alarm indicators. Self-programming supports field firmware updates, and EEPROM can retain setpoints or calibration coefficients. The MCU’s 7 KB Flash capacity allows control algorithms, filtering, fault handling, and communications to coexist in one device. Designers should compensate sensor nonlinearity, verify control-loop timing, and use suitable isolation where the monitored process exceeds the electrical environment of the controller.

⚡

Motor and Relay Control

The PIC16F883-E/ML can coordinate relays, solenoids, and small motors where deterministic timing and multiple digital outputs are required. Its PWM-capable peripherals simplify pulse generation, while the 25 I/O pins provide control for direction signals, feedback inputs, and interlocks. The 20 MHz clock supports responsive debouncing and closed-loop sequencing, and the 256-byte EEPROM can store operating counters or configuration records. A production design should include driver transistors, flyback protection for inductive loads, current limiting, and isolation between the MCU and noisy power stages.

🔋

Power-Supply Monitoring

The PIC16F883-E/ML is useful in power-supply monitoring modules because its ADC can supervise scaled voltage rails, current-sense outputs, and temperature signals while the processor evaluates limits and updates status indicators. The 2.5 V to 5 V operating range supports regulated control electronics, and self-programming enables field adjustment of thresholds or event logging. EEPROM can retain fault counters and operating history across power cycles. For accurate measurements, use a defined divider or amplifier, account for ADC error and settling behavior, and keep high-current switching paths physically separated from the analog measurement section.

🖥️

Instrumentation Front End

The PIC16F883-E/ML can serve as the control and measurement processor in compact instrumentation, combining analog sampling, digital calibration, display control, and data storage in one package. The 11-channel 10-bit ADC supports multiple sensor inputs, and the 25 I/O pins can serve panel controls or communication lines. Its 7 KB Flash memory accommodates acquisition routines and communication firmware, while EEPROM stores calibration constants. For laboratory-grade accuracy, use precision references and suitable signal conditioning; the MCU’s ADC should not be treated as a substitute for a dedicated high-resolution converter when measurement performance requires greater precision or speed.

💡

LED Lighting Controller

The PIC16F883-E/ML suits LED lighting modules and dimming controllers because its PWM resources can generate adjustable drive waveforms and its 11-channel ADC can monitor current or temperature feedback. The 20 MHz processor leaves headroom for lighting effects, button handling, and fault reporting, while 25 I/O pins support multiple channels and status signals. EEPROM is useful for storing brightness scenes or configuration data across power cycles. The design must match the LED driver topology to the MCU supply voltage and use transistor drive, current limiting, and thermal protection appropriate to the LED load.

What is the PIC16F883-E/ML?
The PIC16F883-E/ML is a Microchip Technology 8-bit CMOS Flash PIC microcontroller operating at up to 20 MHz, with 7 KB of program memory, 256 bytes of data memory, 25 I/O pins, and a 28-pin 6x6 mm QFN package with an exposed pad. According to the Microchip product page, the device uses a compact PIC RISC architecture and includes self-programming, two comparators, and an 11-channel 10-bit ADC.
Where can I download the PIC16F883 datasheet PDF?
The official PIC16F883 datasheet and product resources are available from the Microchip PIC16F883 product page at https://www.microchip.com/en-us/product/PIC16F883. The PIC16F883-E/ML ordering information identifies a 28-QFN 6x6 mm package, while the manufacturer product page provides the technical description and access to device documentation.
What is the PIC16F883 pinout?
The PIC16F883-E/ML uses a 28-pin QFN package with an exposed pad, and the manufacturer pin-description table should be used when assigning every connection. The exposed pad is a thermal and electrical package feature and must be connected according to the datasheet layout requirements. Use the Microchip PIC16F883 datasheet rather than a generic 28-pin MCU drawing because multiplexed and analog functions can differ among package variants.
How much memory does the PIC16F883 have?
The PIC16F883-E/ML provides 7 KB of Flash program memory, organized as 4K x 14, together with 256 bytes of data memory and 256 bytes of EEPROM according to the Microchip product description. The Flash supports self-programming, while the EEPROM is useful for nonvolatile calibration and configuration values. The MCU also supports in-circuit programming and ICD-based debugging.
How do I program the PIC16F883?
The PIC16F883 is programmed through its in-circuit programming interface using Microchip-compatible programming tools and software. The device includes self-programming support, so approved firmware can also update its own Flash contents in an appropriate application. The exact programming voltage, connector arrangement, and configuration settings should follow the PIC16F883 datasheet and the toolchain documentation.
What is the PIC16F883-E/ML operating voltage range?
The PIC16F883-E/ML operates from 2.5 V to 5 V, as identified in distributor specifications for this exact orderable part. This range supports 2.5 V, 3.3 V, and 5 V systems. Designers should still verify individual peripheral operating conditions, oscillator requirements, and absolute maximum ratings in the manufacturer datasheet before finalizing the power architecture.
What is the difference between PIC16F883-E/ML and PIC16F883-I/ML?
Both devices use the same PIC16F883 device family and 28-pin 6x6 mm QFN package, while the grade code changes the temperature qualification. The -E/ML part is the target extended-temperature ordering option; the -I/ML part is the industrial-grade option. For a drop-in substitution, confirm the temperature range, operating conditions, and device documentation rather than relying on package shape alone.
Can PIC16F883T-I/ML replace PIC16F883-E/ML?
PIC16F883T-I/ML is a same-family candidate with the same 28-pin 6x6 mm QFN footprint, but the grade code must be checked against the required temperature range. It is a practical drop-in candidate only when its electrical characteristics, qualification level, and operating limits satisfy the design. Use the Microchip pin and code compatibility chart and the PIC16F883 datasheet to confirm the exact substitution.
What is the best drop-in replacement for PIC16F883-E/ML?
The closest drop-in candidates are same-family PIC16 devices in the 28-pin 6x6 mm QFN package, such as PIC16F883-I/ML, with the temperature grade selected to match the application. No cross-manufacturer equivalent was established as pin-to-pin compatible in the available sourcing information. Confirm device identity, flash size, peripheral resources, pin functions, and temperature requirements before production substitution.
What is the best Microchip equivalent for PIC16F883-E/ML?
PIC16F883-I/ML is the most direct Microchip alternative because it retains the PIC16F883 device type and 28-QFN package while using the -I temperature grade. Other PIC16F88x-family QFN parts may share the footprint, but changes in flash size, RAM, EEPROM, comparator channels, or peripheral mix can affect software and board compatibility. Review the family comparison before choosing a broader substitute.
Where can I buy PIC16F883-E/ML online?
Use the Request a Quote form on this page to request PIC16F883-E/ML availability, current commercial terms, and lead time. The product is listed as an active 28-pin QFN microcontroller by the manufacturer, and distributor records identify the exact /ML ordering code. Quote requests are the appropriate route for a firm quotation and quantity confirmation.
What is the price of PIC16F883-E/ML?
Use the Request a Quote form on this page for the current PIC16F883-E/ML price and volume pricing. Commercial terms can change with quantity, availability, and packaging, so a firm quotation should be used for purchasing decisions. The structured pricing on this page is intended to provide the latest quote-ready commercial information.
What is the lead time for PIC16F883-E/ML?
The current lead time for PIC16F883-E/ML should be confirmed through the Request a Quote form on this page. Microchip lists the PIC16F883 as active, but production planning still requires confirmation of the exact suffix, quantity, and delivery schedule. Submitting the required quantity and target date with the quote request provides the most appropriate operational answer.
Is PIC16F883-E/ML in stock?
Current stock for the exact PIC16F883-E/ML orderable part should be checked through the Request a Quote form on this page. The manufacturer identifies the device as active, and distributor records show market listings for the exact suffix. A purchase order should be placed only after XAIPART confirms current inventory, allocation, and the requested delivery quantity.
Is PIC16F883-E/ML suitable for industrial sensor monitoring?
The PIC16F883-E/ML is suitable for compact sensor-monitoring designs requiring local ADC conversion and nonvolatile data handling. Its 11-channel 10-bit ADC, 256-byte EEPROM, 25 I/O pins, and 20 MHz clock support typical control tasks, while the extended-temperature grade supports environments beyond the industrial -I designation. Signal conditioning, calibration, and sensor-specific limits must be validated separately.
What are the key specifications of PIC16F883-E/ML that engineers should know?
The key specifications are a 20 MHz maximum clock, 7 KB Flash program memory, 256 bytes of data memory, 256-byte EEPROM, 25 I/O pins, and a 2.5 V to 5 V supply range. The device also provides two comparators, an 11-channel 10-bit ADC, self-programming, and capture, compare, and PWM resources in a 28-pin 6x6 mm QFN package with an exposed pad.

נתוני עזר הנדסיים עבור PIC16F883-E/ML — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PIC16F883-E/ML when the design requires the -E temperature grade, a 20 MHz PIC16 core, 7 KB Flash, 256-byte EEPROM, 25 I/O pins, and an 11-channel 10-bit ADC in a 28-pin QFN package. PIC16F883-I/ML is the closest same-device choice when industrial-temperature qualification is appropriate and the -E grade is unnecessary. PIC16F883T-I/ML is another same-family QFN candidate, but its exact ordering and temperature characteristics should be checked before release. PIC16F882-I/ML, PIC16F886-I/ML, and PIC16F887-I/ML may share the package family, yet their flash, RAM, EEPROM, and peripheral differences can change firmware and PCB requirements. Use them only after reviewing the family comparison. No cross-manufacturer drop-in replacement was established, so changing vendors for this MCU generally requires a full electrical, firmware, and footprint review.

השוואה עם חלופות

פרמטר מוצר זה PIC16F883-I/ML PIC16F883T-I/ML PIC16F882-I/ML PIC16F886-I/ML PIC16F887-I/ML
Package 28-pin QFN (6x6 mm) with exposed pad 28-pin QFN (6x6 mm) with exposed pad 28-pin QFN (6x6 mm) with exposed pad 28-pin QFN (6x6 mm) with exposed pad 28-pin QFN (6x6 mm) with exposed pad 28-pin QFN (6x6 mm) with exposed pad
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Type 8-bit CMOS Flash PIC microcontroller 8-bit CMOS Flash PIC microcontroller 8-bit CMOS Flash PIC microcontroller PIC16 8-bit Flash microcontroller PIC16 8-bit Flash microcontroller PIC16 8-bit Flash microcontroller
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Temperature Grade -E extended-temperature grade -I industrial-temperature grade -I industrial-temperature grade -I industrial-temperature grade -I industrial-temperature grade -I industrial-temperature grade

מבדילים עיקריים

  • Broader embedded peripheral set in the PIC16F883 (לעומתPIC16F882-I/ML)
  • Direct same-device alternative with a different temperature grade (לעומתPIC16F883-I/ML)
  • Program memory and Flash self-programming support (לעומתPIC16F882-I/ML)

הערות תכנון

Treat the QFN exposed pad as both a thermal path and a required electrical connection according to the manufacturer datasheet. Provide an uninterrupted ground or thermal-pad land pattern with short vias into the ground plane, and maximize nearby copper without violating board-clearance rules. Check the exposed-pad copper area and via current capacity against the dissipation required by the application. Estimated: with 7.0 W dissipation and a 35 C/W junction-to-ambient value, the junction-temperature rise would be 245 C, so a thermal estimate must be performed for high-duty-cycle switching loads.

Place input bypass capacitors directly between each supply pin and the nearest ground reference, with very short traces and low-inductance vias. Keep analog sensor routing away from PWM outputs, relay drivers, and switching-node traces. The 10-bit ADC will be sensitive to ground bounce and supply ripple, so use a stable analog reference, continuous ground routing beneath the QFN, and separate analog and digital return paths where the board architecture permits.

Do not substitute a 28-pin MCU solely because the lead count matches. Verify the package drawing, exposed-pad requirements, pin names, ADC channels, comparator assignments, timer resources, Flash size, RAM, EEPROM, and voltage limits. Also check the temperature-grade code before changing between -E and -I options. The Microchip pin and code compatibility chart is the appropriate starting point, followed by a complete review of the target device datasheet.

Decouple the MCU supply locally and ensure the regulator can support both average current and startup transients from its digital and analog peripherals. Use brownout and reset behavior appropriate to the application so partially initialized firmware cannot drive external equipment. If the MCU controls power stages, define a safe reset state and use pull resistors to keep external control lines inactive while the device is reset or unpowered.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The manufacturer describes the PIC16F883 as an active PIC16 8-bit microcontroller. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not identified for this exact orderable part.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

pic16f883 datasheet pic16f883 pinout pic16f883 programming pic16f883 price in pakistan pic16f883 manual pic16f883 datasheet pdf pic16f883 smd PIC16F883-E/ML pinout PIC16F883-E/ML footprint PIC16F883-E/ML equivalent PIC16F883-E/ML replacement PIC16F883-E/ML vs PIC16F883-I/ML Microchip PIC16F883-E/ML PIC16F883-E/ML price PIC16F883-E/ML application circuit

רכיבים ומונחים קשורים

Microchip Technology PIC16F883 PIC16F883-E/ML PIC16F883-I/ML PIC16F883T-I/ML PIC16F882-I/ML PIC16F886-I/ML PIC16F887-I/ML PIC16 8-bit microcontroller RISC microcontroller CMOS Flash memory embedded microcontroller 28-pin QFN QFN package family surface-mount package exposed pad 10-bit ADC EEPROM self-programming PWM comparator in-circuit programming industrial sensor monitoring power-supply monitoring
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר