Microchip Technology

PIC24EP32MC202-E/SS - 60 MIPS 32KB Motor MCU | Microchip

MPN: PIC24EP32MC202-E/SS ✓ פעיל
28-pin SSOP Package 32 KB Flash Memory
כמות הזמנה מינימלית: 1 |

PIC24EP32MC202-E/SS סקירה

The Microchip Technology PIC24EP32MC202-E/SS is a 16-bit PIC24E motor-control microcontroller with 32 KB of Flash program memory, 4 KB of RAM, up to 60 MIPS performance, and a 28-pin SSOP package. It integrates motor-control PWM, operational amplifiers, comparators, 10-bit and 12-bit ADCs, and Peripheral Touch-on-GPIO peripherals for compact precision-control designs.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one die. The PIC24E belongs to the 16-bit microcontroller hierarchy and combines a DSP-capable instruction set with dedicated resources for motor control. This combination allows a single device to measure position or current, execute control algorithms, and generate accurately timed PWM outputs without relying on several separate analog and timing components.

Key device characteristics include 32 KB of Flash memory for application code, 4 KB of SRAM for control variables and working data, a maximum 60 MIPS rating in the exact ordering code, and an operating temperature range of -40°C to +125°C. The motor-control feature set includes MCPWM peripherals, internal operational amplifiers, comparators, and Peripheral Touch-on-GPIO, while the ADC resources support both 10-bit and 12-bit conversion functions.

The PIC24E architecture is suited to closed-loop systems where execution latency and deterministic peripheral timing matter. Its enhanced on-chip peripherals support energy-efficient, quiet motor operation by consolidating feedback acquisition, signal conditioning, and power-stage control into one package. Designers can use the internal amplifiers with suitable external networks to condition current-sense signals, use comparators for threshold or protection decisions, and use PTG-capable I/O for touch or position-related functions.

Typical uses include two-phase and three-phase brushless DC motor controllers, stepper-motor drivers, servo-control loops, fan and pump controllers, power-tool drives, and compact industrial automation modules. The 28-pin SSOP is especially useful where component density matters but a leaded or very large fine-pitch package would be unnecessary.

PCB design should preserve clean current-sense and feedback paths, keep switching-node connections compact, and provide appropriate decoupling at every supply pin. Because SSOP leads are closely spaced, inspect the manufacturer land pattern and solder-profile recommendations before assembly. Verify motor-power transients, analog-input scaling, and shutdown behavior at the system level rather than relying only on nominal MCU specifications.

This product overview combines the manufacturer device description with verified package, memory, speed, converter, and peripheral details, while also documenting drop-in alternatives, comparison parameters, and practical implementation guidance for motor-control engineers.

חלופות תחליף ישיר עבור PIC24EP32MC202-E/SS — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PIC24EP32MC202-E/SS (אותו גורם צורה וטביעת רגל).

Microchip Technology

PIC24EP32MC202-I/SS

✅ Drop-In
📦 28-pin SSOP
Ordering-code temperature grade differs while the 28-pin SSOP footprint and PIC24EP32MC202 base configuration remain unchanged.

📋 חלופה להתייחסות (לא בקטלוג)

PIC24EP64MC202-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
Microchip Technology
📦 28-pin SSOP
16-bit PIC24EP (modified Harvard, DSC) · 70 MIPS at 60 MHz · 64 KB (22K x 24) · 8 KB · 3.0 V to 3.6 V · -40 C to +85 C (Industrial) · 28-pin SSOP · 21

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PIC24EP32MC203-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
MC203-family function set differs from the MC202 target while retaining a 28-pin SSOP package and comparable PIC24E motor-control resources.

📋 חלופה להתייחסות (לא בקטלוג)

PIC24EP64MC203-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
MC203-family function set and 64 KB Flash differ from the 32 KB MC202 target while preserving a 28-pin SSOP footprint.

📋 חלופה להתייחסות (לא בקטלוג)

PIC24EP128MC202-I/SS

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 28-pin SSOP
Flash increases from 32 KB to 128 KB while the same-family 28-pin SSOP package and motor-control architecture are retained.

📋 חלופה להתייחסות (לא בקטלוג)

PIC24EP32MC202-E/SS דירוגים מרביים ומאפיינים חשמליים

Product Type 16-bit PIC24E motor-control microcontroller
Maximum Performance 60 MIPS
Family Architecture Performance Up to 70 MIPS
Program Memory 32 KB Flash
Program Memory Organization 10.7K x 24 words
Data Memory 4 KB RAM
ADC Resolution 10-bit and 12-bit
Motor-Control Peripheral MCPWM
Analog Resources Internal operational amplifiers and comparators
Capacitive-Sensing Peripheral Peripheral Touch-on-GPIO (PTG)
טווח טמפרטורת פעולה -40°C to +125°C
מארז 28-pin SSOP
Package Code SS
Package Width 5.30 mm
Package Height 2.00 mm
סוג הרכבה Surface mount
Flash Memory 32 KB
SRAM 4 KB
מספר פינים 28 pins
AEC-Q100 Status Qualified

מדריך תצורת פינים של PIC24EP32MC202-E/SS 2.00 mm

תצורת פינים עבור PIC24EP32MC202-E/SS (מארזת 2.00 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 2.00 mm עבור PIC24EP32MC202-E/SS

אין נתוני פריסת פינים מפורטים עבור PIC24EP32MC202-E/SS.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PIC24EP32MC202-E/SS מתאים עבור 6 יישוםs: Three-Phase Brushless DC Motor Control, Stepper-Motor Position and Current Control, Power-Tool Motor Drive, Fan and Pump Speed Control, Servo and Precision Actuator Control, Industrial Automation and Embedded Modules.

🏭

Three-Phase Brushless DC Motor Control

PIC24EP32MC202-E/SS fits a compact three-phase brushless DC motor controller because its MCPWM peripherals support deterministic complementary switching, while the 10-bit and 12-bit ADC resources acquire phase, position, and current feedback. The 60 MIPS processor performance supports faster control-loop execution than a basic general-purpose MCU. Place the MCU near the gate-driver interface, connect current-sense channels to the ADC and comparator inputs, and isolate switching-node feedback from sensitive analog traces. The integrated operational amplifiers can reduce the need for external conditioning, although component values and common-mode limits must be checked against the circuit.

🔧

Stepper-Motor Position and Current Control

PIC24EP32MC202-E/SS is suitable for stepper-motor modules that require position feedback, controlled excitation, and current regulation in a small package. The 32 KB Flash accommodates motion sequences and control code, while 4 KB RAM supports state tracking and loop variables. Its comparators and ADCs can monitor current or position-related signals, and the motor-control PWM resources can produce the stepping waveform. Layout should place current-sense filtering close to the MCU, use a defined analog ground strategy, and keep step-driver and motor-current paths away from communication and precision-feedback nets.

🔧

Power-Tool Motor Drive

PIC24EP32MC202-E/SS can support a compact power-tool drive where rapid current control, speed regulation, and protective shutdown are required. Its 60 MIPS rating allows the control firmware to combine PWM generation with current sampling, load detection, and fault handling. The 28-pin SSOP helps reduce board area, but high-current power stages must remain physically separated from the MCU and analog network. Use short gate-drive traces, provide local supply decoupling, and define a safe disable path so a controller fault cannot leave the bridge unintentionally energized.

⚡

Fan and Pump Speed Control

PIC24EP32MC202-E/SS is appropriate for efficient fan and pump controllers where variable speed, load feedback, and quiet operation are priorities. The MCPWM resources can generate actuator commands, and the ADC, comparator, and amplifier resources can monitor speed, pressure-derived signals, or current. The 60 MIPS control capability allows closed-loop calculations without offloading them to an external processor. For reliable deployment, include input filtering, sensor-ground design, thermal monitoring, and a defined behavior for blocked rotors, dry running, or communication loss.

📱

Servo and Precision Actuator Control

PIC24EP32MC202-E/SS can serve as the digital controller in a compact servo or precision actuator because it combines fast execution with dedicated feedback and PWM peripherals. The 32 KB Flash provides room for motion tables or calibration parameters, while 4 KB RAM supports real-time control state. Its internal analog resources can reduce signal-conditioning component count when configured correctly. The designer should budget sufficient timing margin for the complete loop, calibrate position sensing after assembly, and protect the MCU from motor-transient events with appropriate routing and external clamping.

🏭

Industrial Automation and Embedded Modules

PIC24EP32MC202-E/SS fits compact industrial automation modules that need real-time motor control alongside embedded control logic. Its -40°C to +125°C temperature range and AEC-Q100 identification support demanding product categories when the full qualification and application requirements are satisfied. The 28-pin SSOP package offers a practical upgrade path for boards constrained in area. Industrial designs should separate high-energy motor routing from analog sensing, provide robust brownout and overvoltage behavior, and validate EMC margins at the assembled enclosure level.

סיכום מוצרים מומלצים

PIC24EP32MC202-E/SS Microchip Technology בשימוש ב-: Three-Phase Brushless DC Motor Control, Stepper-Motor Position and Current Control, Power-Tool Motor Drive, Fan and Pump Speed Control, Servo and Precision Actuator Control, Industrial Automation and Embedded Modules PIC24EP32MC203-I/SS Same-family motor-control option בשימוש ב-: Three-Phase Brushless DC Motor Control, Fan and Pump Speed Control PIC24EP32MC202-I/SS Pin-compatible industrial-grade option בשימוש ב-: Stepper-Motor Position and Current Control PIC24EP64MC202-I/SS Microchip Technology בשימוש ב-: Power-Tool Motor Drive PIC24EP128MC202-I/SS Same-family option with greater Flash בשימוש ב-: Servo and Precision Actuator Control PIC24EP64MC203-I/SS Same-family controller with more Flash בשימוש ב-: Industrial Automation and Embedded Modules
What are the key specifications of PIC24EP32MC202-E/SS that engineers should know?
The PIC24EP32MC202-E/SS combines a 16-bit PIC24E processor, 32 KB of Flash, 4 KB of RAM, and a 60 MIPS maximum performance rating in a 28-pin SSOP. Its integration of MCPWM, operational amplifiers, comparators, 10-bit and 12-bit ADCs, and Peripheral Touch-on-GPIO reduces the external component count of compact motor-control systems. According to the Microchip Technology PIC24EP data sheet 70657F, the device is intended for precision motor-control applications requiring fast digital control and dedicated analog peripherals.
What is PIC24EP32MC202-E/SS used for?
PIC24EP32MC202-E/SS is used for compact, precise motor-control systems such as brushless DC drives, stepper-motor controllers, fans, pumps, and power tools. Its 32 KB Flash supports control firmware, while 4 KB RAM provides working storage for algorithms and variables. The integrated MCPWM, ADC, amplifiers, and comparators support feedback acquisition and power-stage control. According to the Microchip Technology PIC24EP data sheet 70657F, the enhanced peripherals support efficient and quiet motor operation.
What is the operating voltage of PIC24EP32MC202-E/SS?
The exact supply-voltage limits for PIC24EP32MC202-E/SS must be taken from the device electrical-characteristics tables in the Microchip Technology PIC24EP data sheet 70657F. The manufacturer identifies this device as a PIC24E motor-control MCU with integrated analog peripherals, but the retrieved product descriptions do not state a numeric operating-voltage range. Use the datasheet limits when selecting the regulator, determining undervoltage behavior, and validating the power-tree design.
Where can I download the PIC24EP32MC202-E/SS datasheet PDF?
The official PIC24EP32MC202-E/SS datasheet is available from Microchip Technology through the device-data document at ww1.microchip.com/downloads/en/DeviceDoc/70657F.pdf. Document 70657F covers PIC24EP family devices and includes the pin, electrical, clock, memory, ADC, PWM, and peripheral information needed for design review. The manufacturer product page for PIC24EP32MC202 is also available for product-family navigation and supporting documentation.
Where can I find the PIC24EP32MC202-E/SS pinout?
The PIC24EP32MC202-E/SS pinout is identified in the 28-pin SSOP section of the Microchip Technology PIC24EP data sheet 70657F. Use its SSOP package drawing and pin-description table to assign tracks, programming connections, supplies, analog inputs, PWM outputs, and communications functions. The verified product data confirms the 28-pin SSOP package but does not reproduce the complete numbered pin table, so the manufacturer document should remain the controlling reference for board layout.
Is PIC24EP32MC202-E/SS suitable for automotive applications?
PIC24EP32MC202-E/SS is identified as an automotive-qualified AEC-Q100 device in the verified product information, and its rated operating-temperature range extends from -40°C to +125°C. Automotive suitability still depends on the complete system requirements, including transient immunity, EMC performance, functional safety, production traceability, and the exact qualified package and lot configuration. Review the Microchip Technology qualification and product documentation before approving an automotive production design.
What is the difference between PIC24EP32MC202-E/SS and PIC24EP32MC202-I/SS?
PIC24EP32MC202-E/SS and PIC24EP32MC202-I/SS use the same 28-pin SSOP format and share the PIC24EP32MC202 device basis, but the ordering codes indicate different temperature grades. The E/SS is specified from -40°C to +125°C, while the I/SS variant carries the industrial temperature designation. Both retain the 32 KB Flash, 4 KB RAM, motor-control peripherals, and same PCB footprint, making the I/SS a practical same-package alternative when its grade designation matches the required temperature policy.
What is the best drop-in replacement for PIC24EP32MC202-E/SS?
PIC24EP32MC202-I/SS is the closest same-package drop-in alternative because it retains the 28-pin SSOP footprint and PIC24EP32MC202 memory configuration while changing the ordering-code temperature grade. A replacement should be qualified against supply voltage, peripheral mapping, programming, qualification, and temperature requirements before release. Microchip Technology’s replacement-part guidance is the appropriate starting point when firmware or board changes are not permitted.
What can replace PIC24EP32MC202-E/SS without changing the PCB?
PIC24EP32MC202-I/SS can replace PIC24EP32MC202-E/SS without changing the 28-pin SSOP land pattern because both use the same package and base device designation. Verify the selected suffix against the required temperature grade, qualification status, supply configuration, and purchasing constraints. More distant members of the PIC24EP motor-control family should only be used after confirming pin functions, memory needs, ADC channels, PWM resources, and firmware compatibility.
Is PIC24EP32MC202-E/SS the same as PIC24EP32MC202-I/SS?
PIC24EP32MC202-E/SS and PIC24EP32MC202-I/SS are electrically and mechanically close but are not identical ordering codes. Both use the 28-pin SSOP package and PIC24EP32MC202 base designation, while the E and I suffixes distinguish their temperature-grade ordering options. The E/SS is verified at -40°C to +125°C. Confirm the required grade and all qualification documentation before treating the I/SS as a substitution.
When should I choose PIC24EP32MC202-E/SS over PIC24EP32MC202-I/SS?
Choose PIC24EP32MC202-E/SS when the product needs the -40°C to +125°C ordering configuration and an AEC-Q100-qualified option for the specified use environment. Choose PIC24EP32MC202-I/SS when the industrial grade designation satisfies the product specification and procurement requirements. Because both use the same 28-pin SSOP footprint, the decision should be based on grade, qualification, lifecycle, and commercial requirements rather than PCB redesign.
Is PIC24EP32MC202-E/SS suitable for a 3-phase BLDC motor controller?
PIC24EP32MC202-E/SS is suitable for compact brushless DC motor control when its MCPWM, ADC, comparator, amplifier, and CPU resources match the required control scheme. Its 60 MIPS performance and dedicated motor peripherals support fast feedback processing and independent PWM generation. The manufacturer describes the PIC24EP family for energy-efficient and quiet precision motor-control systems. Final suitability depends on the number of required phase channels, current-sense method, communications interface, and safety architecture.
Where to buy PIC24EP32MC202-E/SS online?
Use the Request a Quote form on this page to request current pricing, availability, lot information, and lead time for PIC24EP32MC202-E/SS. The inquiry should include the exact MPN PIC24EP32MC202-E/SS, target quantity, required packaging, authorized-source preference, and production schedule. This preserves the distinction between the 28-pin SSOP ordering code and related packages or temperature grades that are not necessarily interchangeable.
What is the price of PIC24EP32MC202-E/SS?
Current pricing for PIC24EP32MC202-E/SS is obtained through the Request a Quote form on this page. The form can return the quantity-break structure for the exact 28-pin SSOP ordering code rather than a family-level price or a price for a different package suffix. For production planning, include annual demand, forecast cadence, reel or tube requirements, and the date on which the quotation must support procurement.
What is the lead time for PIC24EP32MC202-E/SS?
Current lead time for PIC24EP32MC202-E/SS should be confirmed through the Request a Quote form on this page. Lead time can vary with the order quantity, production schedule, package configuration, and supply-chain status, so an engineering estimate should not replace a procurement confirmation. Include required quantities, approved-source conditions, and target delivery dates in the request to obtain an actionable scheduling response.
Is PIC24EP32MC202-E/SS in stock?
Current inventory for PIC24EP32MC202-E/SS is checked through the Request a Quote form on this page. A listing indicating that an order can ship does not by itself guarantee the quantity or production allocation needed for a complete assembly schedule. Request confirmation of stock, date code, lot traceability, packaging condition, and estimated dispatch timing using the exact PIC24EP32MC202-E/SS ordering code.

נתוני עזר הנדסיים עבור PIC24EP32MC202-E/SS — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PIC24EP32MC202-E/SS for a compact motor-control design that requires the verified PIC24EP32MC202 combination of 32 KB Flash, 4 KB RAM, 60 MIPS performance, MCPWM, integrated analog resources, and a 28-pin SSOP package. Its -40°C to +125°C range and identified AEC-Q100 status make it relevant to demanding automotive and industrial product programs. PIC24EP32MC202-I/SS is the closest same-footprint choice when the industrial ordering grade satisfies all project requirements. Consider PIC24EP64MC202-I/SS when additional Flash and RAM are needed without changing to another package family. The MC203-based options require a deliberate peripheral and firmware review because changing the family member may affect ADC, PWM, and analog-resource assignments. No cross-brand drop-in alternatives were established, so changing MCU architecture should be treated as a redesign rather than a substitution.

השוואה עם חלופות

פרמטר מוצר זה PIC24EP32MC202-I/SS PIC24EP64MC202-I/SS PIC24EP32MC203-I/SS PIC24EP64MC203-I/SS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SSOP 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same 28-pin SSOP - same
Program Memory 32 KB Flash 32 KB Flash 64 KB Flash 32 KB Flash 64 KB Flash
Data Memory 4 KB RAM 4 KB RAM 8 KB RAM 4 KB RAM 8 KB RAM
Temperature Grade -40°C to +125°C Industrial grade Industrial grade Industrial grade Industrial grade

מבדילים עיקריים

  • Maintains the same 28-pin SSOP footprint in the closest alternative (לעומתPIC24EP32MC202-I/SS)
  • Provides more program memory without changing the package class (לעומתPIC24EP64MC202-I/SS)
  • Targets the verified 32 KB, 4 KB RAM motor-control configuration (לעומתPIC24EP32MC203-I/SS)

הערות תכנון

Route current-sense and position-feedback traces as short analog paths directly from the sensing network to the relevant ADC or comparator pins. Keep switching-node and motor-phase conductors away from these inputs, use a continuous ground reference, and place analog filtering close to the MCU pins. The integrated amplifiers can reduce external conditioning, but their input networks, common-mode range, and settling behavior must still be checked against the feedback signal.

Separate the MCU supply path from high-current motor and gate-driver loads. Place local decoupling at the supply pins and use the manufacturer’s recommended capacitor network and layout. Confirm supply limits, brownout behavior, and startup sequencing in the electrical-characteristics tables of data sheet 70657F. Motor transients should be controlled at the power-stage level rather than relying on the microcontroller input protection network.

Do not substitute by the base MPN alone: the package and ordering suffix distinguish the 28-pin SSOP device from related package options such as QFN and SOIC variants. Before replacing PIC24EP32MC202-E/SS, compare the complete pin table, peripheral mapping, Flash and RAM needs, programming configuration, temperature grade, qualification, and mixed-signal limits. Firmware migration also requires verification because changes in MC202, MC203, or larger-memory family members may alter peripheral behavior.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The verified product listing identifies the device as automotive and AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not found and remain unknown.

חיפושים קשורים

PIC24EP32MC202-E/SS datasheet PIC24EP32MC202-E/SS pinout PIC24EP32MC202-E/SS datasheet pdf PIC24EP32MC202-E/SS price PIC24EP32MC202-E/SS stock PIC24EP32MC202-E/SS replacement PIC24EP32MC202-E/SS equivalent PIC24EP32MC202 28-pin SSOP PIC24EP32MC202 motor control MCU PIC24EP32MC202 vs PIC24EP64MC202 PIC24EP32MC202 schematic Microchip PIC24EP32MC202-E/SS

רכיבים ומונחים קשורים

Microchip Technology PIC24EP32MC202-E/SS PIC24EP32MC202 PIC24EP32MC202-I/SS PIC24EP64MC202-I/SS PIC24EP32MC203-I/SS PIC24EP64MC203-I/SS PIC24E 16-bit microcontroller motor-control MCU MCPWM operational amplifier comparator 10-bit ADC 12-bit ADC Peripheral Touch-on-GPIO PTG 32 KB Flash 4 KB SRAM 60 MIPS 28-pin SSOP SSOP package family surface-mount package AEC-Q100 RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר