PIC24FJ64GP205-I/M4 - 32MHz 64KB USB MCU | Microchip
MPN: PIC24FJ64GP205-I/M4 ✓ פעילPIC24FJ64GP205-I/M4 סקירה
A microcontroller is a programmable integrated circuit that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as timers, communications interfaces, and GPIO on one device. PIC24F devices belong to the broader MCU -> microcontroller -> embedded controller -> semiconductor hierarchy. They are used where a compact controller must execute firmware, monitor inputs, control outputs, and manage communications without a separate processor, memory, and interface devices.
The PIC24FJ64GP205-I/M4 provides 64 KB of Flash memory, up to 8 KB of SRAM according to the family listing, a maximum CPU frequency of 32 MHz, and up to 16 MIPS instruction throughput. Its USB On-The-Go module supports target-device operation compatible with USB 2.0 and limited stand-alone embedded-host functionality. These characteristics make the device suitable for USB-connected instruments, portable controls, data-acquisition nodes, and embedded human-interface devices.
The family combines a 16-bit architecture with integrated USB connectivity and Microchip's eXtreme Low Power technology. Flash program storage supports field-configurable firmware and simplifies updates without external memory, while SRAM supports working state and data buffering. The 48-UQFN 6 × 6 mm package reduces board area but requires careful escape routing and exposed-pad thermal management for power-dense designs.
Typical applications include USB-connected control panels, portable measurement equipment, data loggers, industrial interface modules, and low-power embedded nodes. A USB desktop or portable system can use the on-chip USB target functionality to exchange data without requiring a separate USB interface IC, although firmware must implement the required USB class, descriptors, and device behavior.
PCB design should place decoupling and bulk capacitors close to the supply pins, preserve adequate copper around the exposed pad, and route USB D+ and D- as a controlled-impedance differential pair. The manufacturer's family datasheet provides the authoritative pin assignment, electrical limits, timing characteristics, and layout guidance for each package variant.
This product page combines the device's core electrical characteristics, USB capabilities, package details, application guidance, and drop-in-replacement assessment. It also identifies where engineers should consult the family datasheet and device programmer resources before finalizing a PCB or production design.
חלופות תחליף ישיר עבור PIC24FJ64GP205-I/M4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC24FJ64GP205-I/M4 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Communication Interfaces, Core Architecture, Operating Temperature Range.
PIC24FJ64GP205T-I/M4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PIC24FJ64GP205-I/M4 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 16-bit PIC24F flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS |
| Program Memory | 64 KB Flash (22K × 24 words) |
| Program Memory Type | ECC Flash |
| Data Memory | 8 KB SRAM |
| CPU Architecture | 16-bit RISC |
| USB Interface | USB On-The-Go, USB 2.0 target and limited stand-alone host |
| Low-Power Technology | eXtreme Low Power (XLP) |
| מארז | 48-UQFN (6 × 6 mm) |
| מספר פינים | 48 pins |
| סוג הרכבה | Surface mount |
| Exposed Thermal Pad | Included in 48-UQFN package |
מדריך תצורת פינים של PIC24FJ64GP205-I/M4 48-uqfn (6 × 6 mm)
תצורת פינים עבור PIC24FJ64GP205-I/M4 (מארזת 48-uqfn (6 × 6 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור PIC24FJ64GP205-I/M4.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PIC24FJ64GP205-I/M4 מתאים עבור 6 יישוםs: USB Data Logger, Portable Measurement Instrument, Industrial Interface Module, USB Human Interface Controller, Portable Medical Control Unit, Low-Power Sensor Node.
USB Data Logger
The PIC24FJ64GP205-I/M4 fits a USB-connected logger that stores control firmware in 64 KB of Flash and maintains working data in up to 8 KB of SRAM. Its 32 MHz 16-bit processor provides responsive sampling, filtering, and packet preparation, while USB On-The-Go provides a direct target-device connection for a host computer. The design can use the USB target function instead of adding a separate USB interface controller. Firmware must implement the selected USB class, descriptors, buffering, and export format, while the 48-UQFN footprint requires careful decoupling and exposed-pad layout.
מומלץ
Portable Measurement Instrument
A portable analyzer or handheld meter can use the PIC24FJ64GP205-I/M4 for sensor conditioning, control, and USB synchronization. The 16-bit architecture and 32 MHz clock provide a practical balance of processing capacity and embedded power efficiency, while 64 KB of Flash accommodates drivers, calibration logic, and a user interface. USB On-The-Go supports connection to a laptop or service tool for configuration and data transfer. Because the device uses eXtreme Low Power technology, firmware can use low-power operating states to extend battery life between measurement sessions.
מומלץ
Industrial Interface Module
The PIC24FJ64GP205-I/M4 is suitable for a compact industrial interface module that coordinates sensors, local outputs, and a USB service connection. Its 64 KB Flash stores protocol handling and application logic, while the 16-bit, 32 MHz CPU supports deterministic control tasks and communication formatting. The integrated USB On-The-Go target function allows configuration and diagnostics through a standard USB port without a separate interface transceiver. The design should isolate external industrial wiring appropriately and provide robust power conditioning before the microcontroller supply pins.
מומלץ
USB Human Interface Controller
The PIC24FJ64GP205-I/M4 can implement a keyboard, control surface, panel, or other USB human-interface device. The 32 MHz 16-bit processor handles input scanning, state management, and HID report generation, while 64 KB of Flash provides room for firmware layers and device-specific behavior. Its USB 2.0-compatible target capability simplifies enumeration and data exchange with a host computer. Firmware must implement the required HID report descriptors and device behavior, while PCB routing should follow the family's USB layout guidance and maintain clean supply decoupling.
מומלץ
Portable Medical Control Unit
The PIC24FJ64GP205-I/M4 can support a portable medical-control or monitoring device that needs local logic and USB connectivity. Its 16-bit, 32 MHz processor can service control loops and manage data transfer, while 64 KB of Flash and 8 KB of SRAM provide dedicated embedded resources. The USB On-The-Go target function supports a wired connection to a host for configuration, diagnostics, or data export. Medical use requires application-specific validation, electrical isolation where appropriate, and compliance review; the MCU package and interface features alone do not establish medical certification.
מומלץ
Low-Power Sensor Node
The PIC24FJ64GP205-I/M4 fits a low-power environmental or equipment sensor node that periodically samples inputs and stores configuration or logged information in Flash. The 16-bit architecture and 32 MHz clock support sensor conditioning, filtering, and communications framing, while eXtreme Low Power technology enables low-duty-cycle operation. USB On-The-Go can be used for configuration or data retrieval when the node is connected to a host. Power-budget calculations should include active time, sleep duration, USB attachment behavior, and the supply current required by the selected peripherals.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC24FJ64GP205-I/M4 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Manufacturer | Microchip Technology |
| Package | 48-UQFN (6 × 6 mm) |
| CPU Architecture | 16-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Maximum Performance | 16 MIPS |
| Program Memory | 64 KB Flash (22K × 24 words) |
| Data Memory | 8 KB SRAM |
| USB Capability | USB On-The-Go with USB 2.0 target and limited stand-alone host support |
| Low-Power Technology | eXtreme Low Power (XLP) |
| Pin Count | 48 pins |
מבדילים עיקריים
- Integrated USB On-The-Go with substantial embedded Flash (לעומתNo qualified cross-brand drop-in alternative identified)
- 16-bit control performance at 32 MHz (לעומתPIC24FJ64GP205T-I/M4)
- Compact 48-pin surface-mount integration (לעומתNo qualified cross-brand drop-in alternative identified)
הערות תכנון
Follow the exposed-pad land pattern and assembly guidelines in the Microchip family datasheet. The 48-UQFN package has a compact 6 × 6 mm body, so input and output decoupling capacitors should be placed as close as practical to their associated supply pins. Preserve uninterrupted ground-plane connectivity beneath the exposed pad and use the package drawing for solder-mask and paste-aperture dimensions rather than estimating them from the body size.
Route USB D+ and D- as a short, continuous, impedance-controlled differential pair with symmetric geometry and minimal stubs. Keep the pair away from clocks, switching-node edges, and other high-current paths. Locate required USB network components close to the relevant device pins, and use the voltage, capacitance, and layout recommendations in the Microchip family datasheet when the design requires USB compliance.
Build the supply network so that steady-state and transient loads at the microcontroller and USB circuitry remain within the device's specified operating range. Place local high-frequency bypass capacitance and bulk energy storage near the package, and keep return current paths short. If the board also powers motors, relays, or other noisy loads, separate those paths from the USB and digital rails to prevent disturbances from appearing in measured or communicated data.
Do not infer the complete pinout from the package pin count or a generic UQFN drawing. Use the 48-UQFN pin diagram in Microchip datasheet DS30010221D to identify power, ground, programming, I/O, USB, and exposed-pad connections. Also verify programming and clock configuration in firmware before enabling USB operation; a correct PCB can still fail enumeration if descriptors, clocks, or interface settings are inconsistent.
Estimate copper and junction-temperature rise from the actual component dissipation and board construction before deployment. Input the regulator loss, MCU current, ambient temperature, and effective thermal resistance into the calculation, because the small 6 × 6 mm UQFN package can depend strongly on the exposed pad and surrounding PCB copper. Keep the calculation separate from datasheet limits and verify the final assembly under worst-case operating conditions.
מידע על תאימות
Compliance status requires confirmation from Microchip's current product documentation or declaration for the exact ordering code.