PIC24FJ64GP205-I/M4 - 32MHz 64KB USB MCU | Microchip
MPN: PIC24FJ64GP205-I/M4 ✓ 啟用中PIC24FJ64GP205-I/M4 概覽
A microcontroller is a programmable integrated circuit that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as timers, communications interfaces, and GPIO on one device. PIC24F devices belong to the broader MCU -> microcontroller -> embedded controller -> semiconductor hierarchy. They are used where a compact controller must execute firmware, monitor inputs, control outputs, and manage communications without a separate processor, memory, and interface devices.
The PIC24FJ64GP205-I/M4 provides 64 KB of Flash memory, up to 8 KB of SRAM according to the family listing, a maximum CPU frequency of 32 MHz, and up to 16 MIPS instruction throughput. Its USB On-The-Go module supports target-device operation compatible with USB 2.0 and limited stand-alone embedded-host functionality. These characteristics make the device suitable for USB-connected instruments, portable controls, data-acquisition nodes, and embedded human-interface devices.
The family combines a 16-bit architecture with integrated USB connectivity and Microchip's eXtreme Low Power technology. Flash program storage supports field-configurable firmware and simplifies updates without external memory, while SRAM supports working state and data buffering. The 48-UQFN 6 × 6 mm package reduces board area but requires careful escape routing and exposed-pad thermal management for power-dense designs.
Typical applications include USB-connected control panels, portable measurement equipment, data loggers, industrial interface modules, and low-power embedded nodes. A USB desktop or portable system can use the on-chip USB target functionality to exchange data without requiring a separate USB interface IC, although firmware must implement the required USB class, descriptors, and device behavior.
PCB design should place decoupling and bulk capacitors close to the supply pins, preserve adequate copper around the exposed pad, and route USB D+ and D- as a controlled-impedance differential pair. The manufacturer's family datasheet provides the authoritative pin assignment, electrical limits, timing characteristics, and layout guidance for each package variant.
This product page combines the device's core electrical characteristics, USB capabilities, package details, application guidance, and drop-in-replacement assessment. It also identifies where engineers should consult the family datasheet and device programmer resources before finalizing a PCB or production design.
直接替換替代品,適用於 PIC24FJ64GP205-I/M4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24FJ64GP205-I/M4 (相同外形與佔位) — 差異在於 Package, Communication Interfaces, Core Architecture, Operating Temperature Range.
PIC24FJ64GP205T-I/M4
✅ 直接替換📋 參考替代品(不在目錄中)
PIC24FJ64GP205-I/M4 最大額定值與電氣特性
| Product Type | 16-bit PIC24F flash microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Maximum Instruction Throughput | 16 MIPS |
| Program Memory | 64 KB Flash (22K × 24 words) |
| Program Memory Type | ECC Flash |
| Data Memory | 8 KB SRAM |
| CPU Architecture | 16-bit RISC |
| USB Interface | USB On-The-Go, USB 2.0 target and limited stand-alone host |
| Low-Power Technology | eXtreme Low Power (XLP) |
| 封裝 | 48-UQFN (6 × 6 mm) |
| 腳位數 | 48 pins |
| 安裝類型 | Surface mount |
| Exposed Thermal Pad | Included in 48-UQFN package |
PIC24FJ64GP205-I/M4 48-uqfn (6 × 6 mm) 腳位配置指南
PIC24FJ64GP205-I/M4(48-uqfn (6 × 6 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24FJ64GP205-I/M4.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24FJ64GP205-I/M4 適用於 6 應用s: USB Data Logger, Portable Measurement Instrument, Industrial Interface Module, USB Human Interface Controller, Portable Medical Control Unit, Low-Power Sensor Node.
USB Data Logger
The PIC24FJ64GP205-I/M4 fits a USB-connected logger that stores control firmware in 64 KB of Flash and maintains working data in up to 8 KB of SRAM. Its 32 MHz 16-bit processor provides responsive sampling, filtering, and packet preparation, while USB On-The-Go provides a direct target-device connection for a host computer. The design can use the USB target function instead of adding a separate USB interface controller. Firmware must implement the selected USB class, descriptors, buffering, and export format, while the 48-UQFN footprint requires careful decoupling and exposed-pad layout.
推薦
Portable Measurement Instrument
A portable analyzer or handheld meter can use the PIC24FJ64GP205-I/M4 for sensor conditioning, control, and USB synchronization. The 16-bit architecture and 32 MHz clock provide a practical balance of processing capacity and embedded power efficiency, while 64 KB of Flash accommodates drivers, calibration logic, and a user interface. USB On-The-Go supports connection to a laptop or service tool for configuration and data transfer. Because the device uses eXtreme Low Power technology, firmware can use low-power operating states to extend battery life between measurement sessions.
推薦
Industrial Interface Module
The PIC24FJ64GP205-I/M4 is suitable for a compact industrial interface module that coordinates sensors, local outputs, and a USB service connection. Its 64 KB Flash stores protocol handling and application logic, while the 16-bit, 32 MHz CPU supports deterministic control tasks and communication formatting. The integrated USB On-The-Go target function allows configuration and diagnostics through a standard USB port without a separate interface transceiver. The design should isolate external industrial wiring appropriately and provide robust power conditioning before the microcontroller supply pins.
推薦
USB Human Interface Controller
The PIC24FJ64GP205-I/M4 can implement a keyboard, control surface, panel, or other USB human-interface device. The 32 MHz 16-bit processor handles input scanning, state management, and HID report generation, while 64 KB of Flash provides room for firmware layers and device-specific behavior. Its USB 2.0-compatible target capability simplifies enumeration and data exchange with a host computer. Firmware must implement the required HID report descriptors and device behavior, while PCB routing should follow the family's USB layout guidance and maintain clean supply decoupling.
推薦
Portable Medical Control Unit
The PIC24FJ64GP205-I/M4 can support a portable medical-control or monitoring device that needs local logic and USB connectivity. Its 16-bit, 32 MHz processor can service control loops and manage data transfer, while 64 KB of Flash and 8 KB of SRAM provide dedicated embedded resources. The USB On-The-Go target function supports a wired connection to a host for configuration, diagnostics, or data export. Medical use requires application-specific validation, electrical isolation where appropriate, and compliance review; the MCU package and interface features alone do not establish medical certification.
推薦
Low-Power Sensor Node
The PIC24FJ64GP205-I/M4 fits a low-power environmental or equipment sensor node that periodically samples inputs and stores configuration or logged information in Flash. The 16-bit architecture and 32 MHz clock support sensor conditioning, filtering, and communications framing, while eXtreme Low Power technology enables low-duty-cycle operation. USB On-The-Go can be used for configuration or data retrieval when the node is connected to a host. Power-budget calculations should include active time, sleep duration, USB attachment behavior, and the supply current required by the selected peripherals.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24FJ64GP205-I/M4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Manufacturer | Microchip Technology |
| Package | 48-UQFN (6 × 6 mm) |
| CPU Architecture | 16-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Maximum Performance | 16 MIPS |
| Program Memory | 64 KB Flash (22K × 24 words) |
| Data Memory | 8 KB SRAM |
| USB Capability | USB On-The-Go with USB 2.0 target and limited stand-alone host support |
| Low-Power Technology | eXtreme Low Power (XLP) |
| Pin Count | 48 pins |
主要差異化特點
- Integrated USB On-The-Go with substantial embedded Flash (對比No qualified cross-brand drop-in alternative identified)
- 16-bit control performance at 32 MHz (對比PIC24FJ64GP205T-I/M4)
- Compact 48-pin surface-mount integration (對比No qualified cross-brand drop-in alternative identified)
設計說明
Follow the exposed-pad land pattern and assembly guidelines in the Microchip family datasheet. The 48-UQFN package has a compact 6 × 6 mm body, so input and output decoupling capacitors should be placed as close as practical to their associated supply pins. Preserve uninterrupted ground-plane connectivity beneath the exposed pad and use the package drawing for solder-mask and paste-aperture dimensions rather than estimating them from the body size.
Route USB D+ and D- as a short, continuous, impedance-controlled differential pair with symmetric geometry and minimal stubs. Keep the pair away from clocks, switching-node edges, and other high-current paths. Locate required USB network components close to the relevant device pins, and use the voltage, capacitance, and layout recommendations in the Microchip family datasheet when the design requires USB compliance.
Build the supply network so that steady-state and transient loads at the microcontroller and USB circuitry remain within the device's specified operating range. Place local high-frequency bypass capacitance and bulk energy storage near the package, and keep return current paths short. If the board also powers motors, relays, or other noisy loads, separate those paths from the USB and digital rails to prevent disturbances from appearing in measured or communicated data.
Do not infer the complete pinout from the package pin count or a generic UQFN drawing. Use the 48-UQFN pin diagram in Microchip datasheet DS30010221D to identify power, ground, programming, I/O, USB, and exposed-pad connections. Also verify programming and clock configuration in firmware before enabling USB operation; a correct PCB can still fail enumeration if descriptors, clocks, or interface settings are inconsistent.
Estimate copper and junction-temperature rise from the actual component dissipation and board construction before deployment. Input the regulator loss, MCU current, ambient temperature, and effective thermal resistance into the calculation, because the small 6 × 6 mm UQFN package can depend strongly on the exposed pad and surrounding PCB copper. Keep the calculation separate from datasheet limits and verify the final assembly under worst-case operating conditions.
合規資訊
Compliance status requires confirmation from Microchip's current product documentation or declaration for the exact ordering code.