R5F113GKKFB#X5 - 32MHz Automotive RL78/F15 MCU | Renesas
MPN: R5F113GKKFB#X5 ✓ פעילR5F113GKKFB#X5 סקירה
An automotive microcontroller is a specialized semiconductor that combines a CPU, embedded nonvolatile memory, communication peripherals, timers, analog interfaces, and safety-oriented control functions in one package. The RL78/F15 belongs to the 16-bit MCU hierarchy and is positioned between general-purpose embedded controllers and more complex automotive processors. Its communication peripherals allow distributed vehicle systems to exchange control and diagnostic information over robust serial networks while the CPU executes application logic.
Key family features include a high-speed internal oscillator supporting 32 MHz CPU operation, an enhanced motor-control timer called Timer RD, and communication support for two CAN channels, LIN, and IEBus. The RL78/F15 is designed to be pin and software upward compatible with the RL78/F14, simplifying migration between earlier and newer automotive control platforms. The family also targets operation up to 125 °C, with a 24 MHz CPU clock available under the stated high-temperature conditions.
The R5F113GKKFB#X5 is intended for automotive applications where integration, peripheral breadth, and compact embedded control are more important than application-processor performance. A single MCU can coordinate body modules, actuator control, sensor conditioning, diagnostic communication, and real-time timing functions. The 32 MHz RL78 core provides sufficient control bandwidth for event-driven automotive tasks, while the dedicated communication and timer resources reduce the need for external controllers in distributed networks.
Typical uses include DC and brushless motor control, HVAC modules, lighting controllers, body-control units, door and seat electronics, sensor interfaces, and automotive gateway or communication modules. In these systems, CAN connectivity supports peer-to-peer vehicle networking, LIN supports lower-cost body subnets, and Timer RD supports deterministic motor-control timing. The same part family can also support LIN/IEBus nodes where multiple low-speed serial interfaces are required.
Designers should verify the exact pin assignments, peripheral channel allocation, memory map, electrical limits, and package dimensions against the Renesas R5F113GKKFB datasheet before releasing PCB artwork. Software migration should preserve the RL78/F14-compatible peripheral model where possible, while validation should include high-temperature operation, CAN/LIN bus fault recovery, reset behavior, and motor-control timing at the intended clock rate.
This page combines the manufacturer’s automotive positioning, confirmed family capabilities, drop-in candidate review, and practical application guidance to support faster engineering evaluation. It distinguishes documented family-level characteristics from individual order-code details so engineers can identify the appropriate Renesas documentation and qualification path.
חלופות תחליף ישיר עבור R5F113GKKFB#X5 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם R5F113GKKFB#X5 (אותו גורם צורה וטביעת רגל).
R5F113GLKFB#X5
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F113GLLFB#X5
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←R5F113GKKFB#H5
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F113GKKFB#V5
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F113LLKFB#V5
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
R5F113GKKFB#X5 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 16-bit automotive microcontroller |
| Product Series | RL78/F15 |
| Maximum CPU Frequency | 32 MHz |
| High-Temperature CPU Frequency | 24 MHz at 125 °C target operation |
| Target Operating Temperature | 125 °C target |
| Flash Memory Range in RL78/F15 Family | 128 KB to 512 KB |
| Communication Interfaces | 2 CAN channels, LIN, and IEBus |
| Motor Control Peripheral | Timer RD |
| Internal Oscillator | High-speed on-chip oscillator supporting 32 MHz CPU operation |
| Package Range in RL78/F15 Family | 48 to 144 pins |
| Core Architecture | RL78 16-bit core |
| Compatibility | Pin and software upward compatible with RL78/F14 |
| Application Segment | Automotive body, HVAC, lighting, and motor-control systems |
| סוג הרכבה | Surface mount |
מדריך תצורת פינים של R5F113GKKFB#X5 48 to 144 pins
תצורת פינים עבור R5F113GKKFB#X5 (מארזת 48 to 144 pins). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור R5F113GKKFB#X5.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
R5F113GKKFB#X5 מתאים עבור 6 יישוםs: Automotive HVAC Control Module, DC Motor Control, Automotive Lighting Controller, Body Control Gateway, Automotive Sensor Interface, Seat and Door Electronics.
Automotive HVAC Control Module
The R5F113GKKFB#X5 fits an HVAC module that must coordinate fan, valve, sensor, and climate functions while communicating with other vehicle controllers. Its RL78/F15 core supports operation up to 32 MHz, while two CAN channels support vehicle-network connectivity and LIN supports inexpensive peripheral links. The family’s 125 °C target operating class is relevant around HVAC hardware exposed to cabin temperature variation. A practical design uses CAN for body or climate-network messaging, LIN for distributed actuators, and timer resources for deterministic control loops. Validation must include bus fault recovery, supply transients, and operation at the intended high-temperature limit.
מומלץ
DC Motor Control
The R5F113GKKFB#X5 is appropriate for compact DC motor controllers that require deterministic timing, vehicle-network communication, and integrated low-power control. The RL78/F15 family operates at up to 32 MHz and includes Timer RD for enhanced motor-control functionality, reducing reliance on discrete timing resources. CAN can exchange speed commands and diagnostic data with a vehicle controller, while LIN can connect a lower-cost sensor or actuator. The automotive temperature target of 125 °C supports use in a protected motor-control enclosure. Final design work must verify timer-channel assignment, motor-drive transistors, current sensing, protection behavior, and timing margins under worst-case clock and temperature conditions.
מומלץ
Automotive Lighting Controller
The R5F113GKKFB#X5 can serve as the central controller in an automotive lighting module containing LEDs, indicators, or adaptive-lighting functions. A 32 MHz RL78 core provides useful control bandwidth for dimming algorithms, button inputs, diagnostics, and communication tasks, while CAN and LIN enable command reception from body and lighting-network nodes. Its 125 °C family target is useful for compact modules mounted in thermally demanding vehicle locations. In implementation, the MCU should handle logic-level drive requests while external transistors switch LED current, and CAN diagnostic services should report lamp or open-load faults. Hardware validation should include supply excursions, ESD-sensitive interfaces, thermal rise, and behavior during bus communication loss.
מומלץ
Body Control Gateway
The R5F113GKKFB#X5 is suited to body and gateway electronics that must bridge multiple vehicle communication networks. The RL78/F15 family provides two CAN channels plus LIN and IEBus, allowing one embedded controller to handle higher-bandwidth automotive networks and lower-cost distributed body nodes. At up to 32 MHz, the core can support protocol handling, diagnostics, input debouncing, and local actuation logic without an application processor. A gateway implementation should assign CAN identifiers and bus roles clearly, isolate termination correctly, and monitor communication health. Testing should cover malformed frames, bus-off recovery, sleep and wake transitions, high-temperature operation, and preservation of diagnostic functions during partial network failures.
מומלץ
Automotive Sensor Interface
The R5F113GKKFB#X5 can integrate readings from pressure, temperature, position, and occupancy sensors into an automotive control module. Its fast 32 MHz-class RL78 core supports sampling, filtering, threshold evaluation, and diagnostic reporting, while LIN or IEBus can connect compatible remote sensors and CAN can deliver consolidated data to a higher-level controller. The family’s 125 °C target is advantageous for sensors installed near hot vehicle structures. Design practice favors short analog input paths, proper reference conditioning, and software filtering that does not compromise required response times. Engineers should verify ADC or comparator characteristics for the exact device, calibrate channel accuracy, and test sensor faults, open circuits, short circuits, and bus interruption at temperature extremes.
מומלץ
Seat and Door Electronics
The R5F113GKKFB#X5 fits seat, door, and latch modules that combine local motor or switch control with centralized vehicle diagnostics. The RL78/F15 core executes control logic at up to 32 MHz, Timer RD supports deterministic timing, and CAN, LIN, and IEBus provide options for linking the module to different vehicle subnetworks. The family’s 125 °C target supports compact electronics exposed to elevated cabin temperatures. A practical module can detect switch positions, monitor actuator position, enforce movement limits, and report faults over CAN. The design should include hardware motor protection, debounce and contact-bounce handling, and a defined safe state for loss of communications. Firmware validation should cover stalled actuators, blocked movement, voltage variation, and restart behavior.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור R5F113GKKFB#X5 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | R5F113GLKFB#X5 | R5F113GLLFB#X5 | R5F113GKKFB#H5 | R5F113GKKFB#V5 | R5F113LLKFB#V5 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 144-LFQFP | 144-LFQFP | 144-LFQFP | 144-LFQFP | 144-LFQFP | 144-LFQFP |
| Product Series | RL78/F15 | RL78/F15 | RL78/F15 | RL78/F15 | RL78/F15 | RL78/F15 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| High-Temperature CPU Frequency | 24 MHz at 125 °C target | 24 MHz at 125 °C target | 24 MHz at 125 °C target | 24 MHz at 125 °C target | 24 MHz at 125 °C target | 24 MHz at 125 °C target |
| CAN Support | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Serial Interface Support | LIN and IEBus | LIN and IEBus | LIN and IEBus | LIN and IEBus | LIN and IEBus | LIN and IEBus |
| Motor Control Peripheral | Timer RD | Timer RD | Timer RD | Timer RD | Timer RD | Timer RD |
| RL78/F14 Migration Compatibility | Pin and software upward compatible | Pin and software upward compatible | Pin and software upward compatible | Pin and software upward compatible | Pin and software upward compatible | Pin and software upward compatible |
מבדילים עיקריים
- Integrated multi-network automotive connectivity (לעומתR5F113GLLFB#X5)
- Dedicated automotive motor-control timing (לעומתR5F113GKKFB#H5)
- RL78/F14 migration path (לעומתR5F113LLKFB#V5)
הערות תכנון
Treat the 125 °C target as a family-level operating objective, not a substitute for the exact device’s electrical limits. Validate the final controller across its intended ambient range and account for self-heating near power regulators or drive transistors. Estimated: if the MCU dissipates 100 mW and the assembled assembly has an effective thermal resistance of 50 °C/W, the local temperature rise is about 5 °C. Actual values must come from the exact package documentation and board thermal analysis.
Assign every MCU net from the order-code-specific Renesas pin-description table rather than a generic RL78/F15 schematic. Keep CAN and LIN routing away from switching nodes and sensitive analog inputs, provide the interface circuit’s prescribed termination and protection, and place decoupling capacitors adjacent to the relevant supply pins. The 144-LFQFP footprint requires adequate fanout for communication, timer, debug, and power functions, so check pad assignments before releasing the PCB.
Do not assume that every R5F113 order code has identical flash capacity, peripheral routing, qualification grade, or temperature behavior. Although the candidates share the RL78/F15 architecture, 32 MHz CPU capability, CAN, LIN, IEBus, and Timer RD resources, order-code differences can change memory or device qualification. Cross-check the exact data sheet, errata, and user’s manual before approving a substitute or modifying the PCB.
Design the MCU supply for automotive transients, local decoupling, and orderly startup across all communications interfaces. The 32 MHz operating point can increase dynamic power relative to lower-frequency modes, while sleep behavior must be confirmed for the exact order code. Review the device’s internal oscillator accuracy and maximum external-clock arrangement, and avoid calculating timing margins from the nominal 32 MHz figure until oscillator tolerance and temperature drift are included.
מידע על תאימות
The manufacturer identifies the R5F113GKKFB#X5 for automotive applications, but the available product-page excerpt does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.