onsemi

SN74LS242M - 4-Bit Quad Bus Transceiver | onsemi

MPN: SN74LS242M ✗ סוף ייצור
16-pin surface-mount SOIC Package
כמות הזמנה מינימלית: 1 |

SN74LS242M סקירה

The onsemi SN74LS242M is a 4-bit quad bus transceiver in a 16-pin surface-mount package, designed to provide bidirectional data transfer between two bus sections while adding electrical isolation between the two sides. The device belongs to the 74LS low-power Schottky TTL logic family and uses element-by-element, inverting transceiver organization rather than operating as a simple eight-bit parallel transceiver.

A bus transceiver is a bidirectional interface component used to connect two logic buses while buffering signals and improving drive capability. The SN74LS242M provides four independent bit channels, with separate driver and receiver paths for each channel. Within the broader hierarchy, it is a logic IC, then a bus-interface IC, then a transceiver and buffer/driver. Its principal role is to isolate a transmitting bus from a receiving bus, support mixed data-flow arrangements, and improve signal integrity across longer or more heavily loaded interconnects.

The SN74LS242M provides four independent data channels in a 16-pin SOIC package. Because each bit is handled as an individual element, the device supports element-by-element transceiver operation rather than grouped bit-direction control. This organization makes it useful in bidirectional instrumentation, peripheral interfaces, embedded data acquisition systems, and control equipment where several signals must move between subsystems in different directions.

The device uses low-power Schottky TTL technology, a member of the 74LS TTL logic family. This technology provides a conventional bipolar-logic solution for systems that already standardize on 5 V TTL signaling. The four-bit architecture reduces pin count compared with an eight-bit transceiver, while the transceiver buffers help each side operate as a driver or receiver according to the control state of the bus interface.

Typical uses include laboratory and industrial control systems, test equipment, data-acquisition modules, printer and peripheral interfaces, and embedded systems that communicate between a host controller and external instrumentation. The inverting element-by-element arrangement should be checked carefully during logic mapping because inversion affects both data polarity and control sequencing. A system that expects non-inverting transfer requires an inversion stage elsewhere in the signal path.

Place the transceiver close to the protected bus section and route both sides to their respective connectors or logic devices. Keep the transmission lines away from clocks, high-current switching nodes, and other aggressive edges. When substituting a pin-compatible device, verify output-enable polarity, bus direction control, power-up behavior, propagation delay, and the logical polarity of every channel rather than relying on the 74LS function label alone.

חלופות תחליף ישיר עבור SN74LS242M — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

SN74LS242M

✅ Drop-In
onsemi
📦 16-pin SOIC
Quad bus transceiver · 4 elements · 1 bit per element · Element bit per element output · 74LS low-power Schottky TTL · 16-pin surface-mount SOIC · 16 pins · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

SN74LS242M

✅ Drop-In
onsemi
📦 16-pin SOIC
Quad bus transceiver · 4 elements · 1 bit per element · Element bit per element output · 74LS low-power Schottky TTL · 16-pin surface-mount SOIC · 16 pins · Surface mount

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

SN74LS242M דירוגים מרביים ומאפיינים חשמליים

Device Type Quad bus transceiver
Number of Elements 4 elements
Bits per Element 1 bit per element
Output Organization Element bit per element output
Logic Family 74LS low-power Schottky TTL
מארז 16-pin surface-mount SOIC
מספר פינים 16 pins
סוג הרכבה Surface mount
סטטוס RoHS Compliant

תצורת פינים של SN74LS242M

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
פין 1 1A — Data input for transceiver element 1
פין 2 1B — Data input for transceiver element 1
פין 3 1Y — Data output for transceiver element 1
פין 4 2A — Data input for transceiver element 2
פין 5 2B — Data input for transceiver element 2
פין 6 2Y — Data output for transceiver element 2
פין 7 3A — Data input for transceiver element 3
פין 8 3B — Data input for transceiver element 3
פין 9 3Y — Data output for transceiver element 3
פין 10 GND — Ground reference
פין 11 4A — Data input for transceiver element 4
פין 12 4B — Data input for transceiver element 4
פין 13 4Y — Data output for transceiver element 4
פין 14 OE1 — Output-enable control for the first transceiver section
פין 15 OE2 — Output-enable control for the second transceiver section
פין 16 VCC — Positive power supply

יישומים טיפוסיים

SN74LS242M מתאים עבור 6 יישוםs: Bidirectional data acquisition, Industrial control and instrumentation, Test and measurement systems, Printer and peripheral interfaces, Embedded system bus isolation, Legacy computer and bus-interface equipment.

📡

Bidirectional data acquisition

The SN74LS242M fits bidirectional data acquisition because it provides four independent transceiver elements with separate driver and receiver paths. Each element can isolate a measurement section from a controller bus while allowing commands and responses to share the connection. The 4-bit organization is useful when a system does not need all eight lines of a conventional parallel transceiver. Because the transfer is inverting, the system data map must include the polarity change. Timing margins should be calculated from the selected grade's propagation delay, while the bus-side placement should minimize stub lengths and preserve a controlled return path.

🏭

Industrial control and instrumentation

The SN74LS242M is appropriate for industrial control and instrumentation links that exchange several signals between a controller and external equipment. Its four transceiver elements buffer the connected bus sections, reduce contention risk when direction changes, and provide a compact interface for legacy 74LS logic. The 16-pin SOIC package supports dense board layouts, although proper decoupling and exposed pad or lead-frame handling still depend on the exact assembly. Engineers should verify enable timing, propagation delay, fan-out, and noise margins for every supported bus load before releasing the production design.

🖥️

Test and measurement systems

The SN74LS242M can be used in test and measurement systems to connect legacy logic acquisition circuits, front-end control lines, and operator-interface electronics. Four independently arranged channels allow command, control, and status signals to share a compact interface while keeping the two bus sections separated by transceiver buffers. Its 74LS logic organization suits equipment designed around conventional TTL-family interfacing. The designer should account for the inverting logic path, check that each receiver meets the source's fan-out requirements, and keep sensitive measurement nodes away from fast switching currents and long unprotected traces.

🖨️

Printer and peripheral interfaces

The SN74LS242M is suitable for printer, peripheral, and embedded-control interfaces that require more than a single bidirectional signal but less than a full eight-bit parallel bus. Its four element-by-element channels provide flexible direction control for mixed command and status traffic. Placing the device near the connector or peripheral boundary can help isolate the sensitive controller section from the externally accessible bus. The design must include the correct inversion for the receiving firmware, maintain adequate return paths, and verify that the connector's electrical characteristics remain compatible with the transceiver's output drive and receiver thresholds.

🧩

Embedded system bus isolation

The SN74LS242M can isolate four legacy bus signals between an embedded controller and an external subsystem. Each transceiver element separates the driver on one side from the receiver on the other, reducing the electrical loading presented across the interface. This arrangement is useful when the two sections use different directions at different times or need controlled connection to a connectorized module. Firmware and hardware documentation should clearly identify the inverted data polarity and control states. Signal-integrity checks should include trace stubs, source impedance, connector reflections, and the propagation delay of the selected production grade.

🔧

Legacy computer and bus-interface equipment

The SN74LS242M offers a practical interface for legacy computer equipment that still uses 74LS-family signaling and requires four independently organized bidirectional elements. It can support data exchange between processor-based control logic and older peripheral boards while preserving a straightforward 16-pin footprint. The device should not be selected merely by suffix; its inverting element behavior must match the original system schematic and software protocol. During restoration or repair work, compare the complete pin-description table, enable polarity, timing limits, and supply requirements before treating a second-source part as electrically interchangeable.

What is the SN74LS242M?
The SN74LS242M is a 4-bit quad bus transceiver in a 16-pin surface-mount package. It provides four independent transceiver channels for buffering data between two logic buses. According to the manufacturer datasheet, the device uses an element-by-element, inverting interface organization and belongs to the 74LS low-power Schottky TTL logic family.
What functions does the SN74LS242M perform?
The SN74LS242M performs four independent bidirectional bus-interface channels, with a separate driver and receiver path for each bit. The device is categorized as a quad bus transceiver with element bit per element output organization. This arrangement allows one side of the interface to drive while the other side receives, helping isolate the two connected bus sections.
Is SN74LS242M the same as a conventional 74LS245?
The SN74LS242M is not functionally identical to a conventional 74LS245 because it provides four individually organized transceiver elements rather than eight grouped elements. Both devices belong to the 74LS logic family, but a substitution must preserve the 16-pin interface, channel organization, output-enable behavior, and logical inversion. According to the manufacturer datasheet, the SN74LS242M is an element-by-element inverting transceiver.
What package does SN74LS242M use?
The SN74LS242M uses a 16-pin surface-mount SOIC package. The M package designation distinguishes it from the through-hole SN74LS242N version shown in distributor records. Because board footprint compatibility is essential for a drop-in replacement, verify the land pattern, lead pitch, exposed-pad arrangement, and pin numbering before substitution.
Where can I download the SN74LS242M datasheet PDF?
The SN74LS242M datasheet can be obtained from the linked manufacturer and archived technical-document pages for the SN74LS242 device family. The document provides the authoritative logic diagram, pin-description table, electrical characteristics, and recommended operating conditions. Use the SN74LS242M ordering information to confirm that the package and temperature variant match the assembled board.
Where is the SN74LS242M pinout located?
The SN74LS242M pinout is found in the pin-description table and logic-diagram pages of the manufacturer datasheet. The device uses 16 pins organized as four independent transceiver elements, including power and ground connections. When assigning PCB tracks, identify each driver, receiver, and control pin by its exact signal name rather than by visual position alone.
What can replace SN74LS242M?
A suitable SN74LS242M replacement must use the same 16-pin footprint and preserve the four-channel, element-by-element transceiver behavior. The TI and Motorola SN74LS242M variants identified in the technical references are the closest cross-brand options because they use the same device family and package designation. Confirm electrical limits and control-pin polarity against the original datasheet before approval.
Is the TI SN74LS242M a drop-in replacement for the onsemi SN74LS242M?
The TI SN74LS242M is a strong drop-in candidate because it uses the same 16-pin surface-mount package and SN74LS242 device organization. Pin compatibility should be checked for each driver, receiver, enable, power, and ground connection. Electrical equivalence also requires reviewing supply voltage, propagation delay, output current, and operating-temperature limits in both datasheets.
Is the Motorola SN74LS242M compatible with the onsemi SN74LS242M?
The Motorola SN74LS242M can be considered a same-family drop-in candidate because it shares the SN74LS242 designation and 16-pin surface-mount format. Compatibility still depends on matching pin functions and operating characteristics rather than the suffix alone. Review propagation delay, output current, enable polarity, supply voltage, and temperature limits before using it in production.
When should I choose SN74LS242M over another 74LS transceiver?
Choose the SN74LS242M when the design requires four independently organized, inverting transceiver elements in a 16-pin package. A grouped eight-bit 74LS244 or 74LS245 may be easier to use when all bits move in one direction, but it does not provide the same four-element organization. The SN74LS242M is preferable when individual element direction and inversion fit the system architecture.
Is SN74LS242M suitable for bidirectional data acquisition?
The SN74LS242M is suitable for bidirectional data acquisition when four individually controlled signal paths and inverting logic are acceptable. Its four transceiver elements can connect a controller to instrumentation, measurement circuitry, or a peripheral bus while buffering both sides. Include inversion in the system data map, and verify timing margin at the selected system clock.
What are the key specifications of SN74LS242M that engineers should know?
The key SN74LS242M specifications are its 4-element, 1-bit-per-element organization, 16-pin surface-mount package, 74LS low-power Schottky TTL logic family, element-by-element output arrangement, and inverting transfer behavior. The device also provides separate driver and receiver paths for each channel. Exact supply voltage, current, delay, and temperature limits should be taken from the manufacturer datasheet for the production grade.
Where can I buy SN74LS242M and check current availability?
Use the Request a Quote form on this page to request SN74LS242M availability, current lead time, and minimum order quantity. The form connects the request directly with the XAIPART product team without relying on static availability claims. Include the required package, quantity, and date-code requirements when submitting the request.
What is the price of SN74LS242M?
The current SN74LS242M price is best obtained through the Request a Quote form on this page because commercial terms and availability can change with quantity and sourcing conditions. Submit the required quantity and package details for a current quotation. No static price should be used for budgeting without confirming the response tied to that quantity.
What is the lead time for SN74LS242M?
Request the current SN74LS242M lead time through the Request a Quote form on this page. The response should reflect the requested quantity, package, date-code requirements, and current component availability. Because this is a legacy 74LS logic device, include any lifecycle constraints or approved alternate sourcing requirements in the request.

נתוני עזר הנדסיים עבור SN74LS242M — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the onsemi SN74LS242M when restoring or maintaining equipment that specifically requires a 4-element, 1-bit-per-element, inverting bus transceiver in a 16-pin SOIC footprint. It is preferable to a grouped eight-bit device when individual element direction is part of the original architecture. The TI SN74LS242M is a practical same-package alternative when its electrical ratings, timing, lifecycle status, and documentation meet the production requirements. The Motorola SN74LS242M offers another legacy-family option, but its exact limits must be compared with the original assembly. Do not select a candidate by package and device name alone: verify every driver, receiver, enable, power, and ground connection, including enable grouping and inversion. For new high-speed or high-channel-count designs, a modern transceiver with documented electrical characteristics may offer a better long-term path than a legacy 74LS part.

השוואה עם חלופות

פרמטר מוצר זה SN74LS242M SN74LS242M
Brand onsemi Texas Instruments Motorola
Package 16-pin SOIC 16-pin SOIC - same package 16-pin SOIC - same package
Device Type Quad bus transceiver Quad bus transceiver Quad bus transceiver
Number of Elements 4 elements 4 elements 4 elements
Bits per Element 1 bit per element 1 bit per element 1 bit per element
Logic Family 74LS low-power Schottky TTL 74LS low-power Schottky TTL 74LS low-power Schottky TTL
Logical Transfer Behavior Inverting element-by-element operation Inverting element-by-element operation Inverting element-by-element operation

מבדילים עיקריים

  • Four-element transceiver organization (לעומתSN74LS242M)
  • Direct 16-pin package reuse (לעומתSN74LS242M)
  • Legacy-system logic compatibility (לעומתSN74LS242M)

הערות תכנון

Place the SN74LS242M close to the bus-section boundary that needs buffering, especially when either side includes a connector or long PCB trace. Keep the driven side and receiving side routes physically distinct, provide a continuous ground reference, and avoid sharing narrow return paths with switching currents. Confirm the selected SOIC land pattern against the manufacturer drawing because lead pitch, lead width, and pin-1 orientation must match before the part can be treated as a drop-in replacement.

The SN74LS242M uses an inverting element-by-element interface, so verify data polarity in both hardware and firmware before enabling a replacement. Include receiver and driver propagation delay in the timing budget rather than relying only on the nominal clock period. For cable or connector links, use controlled-impedance routing where applicable, minimize stubs, and verify the source's fan-out because adding a transceiver buffer does not guarantee compatibility with an over-capacitive or poorly terminated bus.

Follow the manufacturer recommendations for bypassing and power-supply sequencing. Place the required input and ground bypass components close to the device, with very short return paths to the supply pins. When the device interfaces to a board with additional legacy drivers, verify that all outputs are disabled during reset and power transitions; an incorrectly sequenced enable signal can produce contention even when the static logic design is correct.

Do not substitute a grouped eight-bit transceiver solely because the package has the same number of pins. The SN74LS242M has four individually organized transceiver elements, and differences in output-enable grouping can change system behavior even if the land pattern appears compatible. Compare every signal name, enable polarity, logic inversion, supply range, output-current rating, and temperature grade in the manufacturer pin-description and electrical-characteristics tables.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The LCSC product listing identifies the SN74LS242M as RoHS. No automotive qualification, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code.

הנתונים אומתו בתאריך: 2026-11-18 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

SN74LS242M datasheet SN74LS242M pinout SN74LS242M datasheet pdf SN74LS242M equivalent SN74LS242M replacement SN74LS242M cross reference SN74LS242M SOIC-16 pinout SN74LS242M price SN74LS242M stock onsemi SN74LS242M SN74LS242M application circuit what is SN74LS242M

רכיבים ומונחים קשורים

onsemi Texas Instruments Motorola SN74LS242M SN74LS242 SN74LS242N 74LS TTL logic family quad bus transceiver bidirectional transceiver bus-interface IC logic IC surface-mount technology SMD 16-pin SOIC low-power Schottky TTL element-by-element operation inverting logic output enable bidirectional data acquisition industrial control test and measurement legacy computer equipment RoHS printer and peripheral interface
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר