Texas Instruments

SN74LS629N - Dual 20 MHz VCO | Texas Instruments

MPN: SN74LS629N ✓ פעיל
PDIP-16, N package Package 20 MHz Speed
כמות הזמנה מינימלית: 1 |

SN74LS629N סקירה

Texas Instruments SN74LS629N is a dual voltage-controlled oscillator in a 16-pin PDIP package. Each of its two independently controlled oscillator sections provides a maximum operating frequency of 20 MHz, while the input control voltage varies the operating frequency according to the device transfer characteristics. The SN74LS629N is designed for frequency generation, frequency modulation, tone generation, sweep generation, phase-related signal processing, and clocking applications where an adjustable clock or carrier is required.

A voltage-controlled oscillator, or VCO, is a timing and frequency-generation circuit whose output frequency is controlled by an externally applied voltage. It belongs to the oscillator and clock-and-timing IC hierarchy, where it combines a stable internal oscillator with a voltage-to-frequency conversion function. The dual architecture provides two oscillator channels in one package, reducing component count and board area when a system requires two related but independently adjustable timing signals.

The primary electrical characteristics of the SN74LS629N include two voltage-controlled oscillator sections, a maximum frequency of 20 MHz, and a 16-pin PDIP package rated for a 0°C to 70°C operating temperature range. The N package suffix identifies the standard through-hole PDIP configuration. The device is associated with the SN74LS629 family, which is categorized by Texas Instruments as a programmable timer and oscillator product within the 74LS logic family.

The dual VCO structure makes the SN74LS629N useful when two frequencies must vary without using two separate oscillator packages. Each oscillator can be driven by its own control voltage, allowing one channel to act as a reference while the other performs modulation or sweep generation. Designers should account for the control-voltage range, transfer gain, output drive, and load capacitance listed in the manufacturer datasheet when setting the operating point.

Typical uses include low- and intermediate-frequency signal generation, voltage-controlled frequency references, sweep and ramp generation, two-channel modulation systems, tone-shaping circuits, and instrumentation. In laboratory equipment, the two sections can generate a carrier and a variable clock. In communications equipment, they can support adjustable local timing or modulation. In industrial controls, they can provide a programmable frequency reference where a fixed crystal oscillator is insufficient.

The principal design consideration is signal integrity around the control inputs. Keep control-voltage traces short, isolate them from fast switching nodes, and use a clean reference voltage to prevent frequency jitter. The 20 MHz upper frequency is a maximum device capability rather than a guarantee of useful output quality at every control voltage, load, supply, or temperature. Confirm timing margins and output-waveform requirements in the target system before release.

This page organizes the manufacturer product information, exact-orderable package details, sourcing guidance, and engineering selection notes for the SN74LS629N. It also identifies why true drop-in replacements are uncommon: equivalent oscillator functions generally use a different package, pinout, supply family, or control characteristic, making an unverified substitution risky.

חלופות תחליף ישיר עבור SN74LS629N — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

SN74LS629N מפרטים

Product Type Dual voltage-controlled oscillator
Number of Oscillator Sections 2 sections
Maximum Frequency 20 MHz
Frequency Control Method External control voltage
טווח טמפרטורת פעולה 0°C to 70°C
Package Type PDIP-16, N package
מספר פינים 16 pins
סגנון הרכבה Through-hole
Logic Family 74LS
טמפרטורת פעולה 0°C to 70°C

מדריך תצורת פינים של SN74LS629N pdip-16, n package

תצורת פינים עבור SN74LS629N (מארזת pdip-16, n package). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת pdip-16, n package עבור SN74LS629N

אין נתוני פריסת פינים מפורטים עבור SN74LS629N.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

SN74LS629N מתאים עבור 6 יישוםs: Dual-Channel Tone Generator, Frequency-Sweep Instrumentation, Voltage-Controlled Clock Reference, FM and AM Signal Modulation, Industrial Timing and Control, Laboratory Test and Measurement.

🎧

Dual-Channel Tone Generator

The SN74LS629N fits dual-channel tone-generation systems because its two voltage-controlled oscillator sections can be adjusted with separate control voltages. A control block can sweep or modulate one channel while the other supplies a stable reference tone, allowing the design to compare two related frequencies. With a maximum oscillator frequency of 20 MHz, the device covers low- and intermediate-frequency audio and instrumentation ranges rather than microwave signal generation. The implementation should use low-noise control references and keep sensitive timing traces away from digital switching nodes. Output loading and permissible waveform characteristics must follow the manufacturer datasheet because the 20 MHz value is a maximum device rating, not a guarantee of equal performance at every control voltage.

🔧

Frequency-Sweep Instrumentation

The SN74LS629N is suitable for a voltage-programmed sweep source because either oscillator section can vary in frequency as its control voltage changes. A ramp generator and digital-to-analog conversion path can command the oscillator, while a counter can capture or display the resulting frequency. Its dual-channel architecture allows a second section to generate a reference or marker signal. The device supports operation up to 20 MHz, but useful sweep accuracy also depends on control-voltage resolution, oscillator transfer characteristics, and counter resolution. Engineers should evaluate settling behavior and temperature drift over the intended sweep range rather than assuming constant tuning sensitivity across the full frequency span.

⏱️

Voltage-Controlled Clock Reference

A clock-reference design can use one SN74LS629N section as a continuously adjustable timing source and reserve the other section for a related auxiliary clock. This arrangement is useful in calibration equipment, adjustable dividers, and test systems where a fixed oscillator cannot provide the required tuning range. The 16-pin PDIP package supports through-hole prototyping and inspection, while the 0°C to 70°C N-package specification covers commercial ambient conditions. Timing-critical downstream circuits should be evaluated for jitter and duty-cycle distortion, because a maximum frequency rating alone does not characterize edge quality. Stable reference generation and careful grounding are essential when the oscillator output drives digital counters or precision timing circuits.

🌐

FM and AM Signal Modulation

The SN74LS629N can serve as a carrier oscillator in a basic voltage-controlled modulation circuit, with the external control input receiving the modulating waveform. The second oscillator section can generate a second carrier, reference tone, or auxiliary modulation source. Because the device is specified up to 20 MHz, it is best suited to low- and intermediate-frequency transmitters rather than RF carrier generation. Distortion and modulation fidelity depend on the oscillator's voltage-to-frequency linearity and the bandwidth of the control path. Keep modulation transients away from supply and logic pins, provide adequate input decoupling, and verify output swing into the following stage before establishing the modulation index.

🏭

Industrial Timing and Control

The SN74LS629N can provide adjustable timing signals in an industrial controller when the mechanism requires frequency variation rather than a fixed clock. One channel may drive a pulse-rate actuator while the other produces a supervisory or phase-related signal. Its dual sections reduce the number of separate oscillator packages, and the PDIP format is convenient for rugged through-hole control boards during prototyping. The commercial 0°C to 70°C rating must be checked against the enclosure temperature and nearby heat sources. Because an industrial environment can introduce supply and control-voltage noise, use filtering, grounding, and shielding that do not distort the required tuning bandwidth. Confirm restart behavior and output timing before using the oscillator as a safety-critical reference.

🔬

Laboratory Test and Measurement

The SN74LS629N is useful in a laboratory oscillator or function-generator accessory where a voltage variable output is needed. One oscillator section can generate the test waveform while the second creates a reference or auxiliary output for triggering and comparison. The maximum 20 MHz frequency supports many low-frequency waveform, clock, and response tests. The through-hole PDIP package is particularly convenient for educational and prototype boards where socketed construction and easy inspection are valuable. Measurement accuracy still depends on the external control DAC, supply regulation, grounding, and output loading. Use calibrated instrumentation to characterize frequency versus control voltage and ensure the selected control range remains within the oscillator's specified operating limits.

What is the SN74LS629N?
The SN74LS629N is a dual voltage-controlled oscillator IC with two oscillator sections and a maximum frequency of 20 MHz. Texas Instruments identifies it as a dual voltage-controlled oscillator in the SN74LS629 family. It is packaged in a 16-pin PDIP configuration and is intended for applications requiring output frequencies that can be varied by an external control voltage.
What are the key specifications of SN74LS629N that engineers should know?
The SN74LS629N provides two voltage-controlled oscillator sections, supports frequencies up to 20 MHz, and uses a 16-pin PDIP package. According to the Texas Instruments manufacturer product page and datasheet, the N-package ordering option is specified for operation from 0°C to 70°C. Its dual architecture permits two adjustable timing signals to be implemented in one component.
What is the operating temperature range of SN74LS629N?
The SN74LS629N operates from 0°C to 70°C in the N package. The Texas Instruments part-details listing states this temperature range for the exact 16-pin PDIP ordering code. Applications operating below 0°C or above 70°C require a different qualified ordering option or another device selected for the required environmental limits.
Where can I download the SN74LS629N datasheet PDF?
The official SN74LS629 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn74ls629.pdf. The document covers the dual voltage-controlled oscillator family, including the SN74LS629N package configuration, electrical characteristics, timing information, and application details. Use the manufacturer PDF for design calculations and final qualification.
Where can I find the SN74LS629N pinout?
The SN74LS629N pinout is shown in the pin-configuration section of the Texas Instruments SN74LS629 datasheet. The exact-orderable SN74LS629N uses a 16-pin PDIP package, but the complete terminal names and numbering must be transcribed from the manufacturer diagram before assigning PCB connections. Do not infer the dual oscillator pin assignments from another SN74LS629 package variant.
Can SN74LS629N generate two independent frequencies?
The SN74LS629N contains two voltage-controlled oscillator sections, allowing two frequency-related outputs to be controlled independently when the application circuitry provides separate control signals. Its maximum frequency is 20 MHz. The usable frequency range, relationship between control voltage and frequency, and output performance must be read from the manufacturer datasheet for the selected operating conditions.
What is the SN74LS629N used for in signal-processing applications?
The SN74LS629N is suitable for adjustable tone generation, frequency sweeps, modulation, and clock-reference circuits because its two oscillator sections can respond to external control voltages. Its 20 MHz maximum frequency makes it applicable to low- and intermediate-frequency systems. A typical design uses one section for a reference waveform and the other for a swept or modulated output.
When should I choose SN74LS629N over a fixed-frequency oscillator?
Choose the SN74LS629N when the circuit must continuously vary or electronically trim an oscillator frequency. A fixed crystal or ceramic oscillator is preferable when frequency accuracy, drift, or startup behavior must remain tightly controlled and no runtime tuning is required. The SN74LS629N trades fixed-frequency stability for programmable control over two oscillator channels.
What is the best drop-in replacement for SN74LS629N?
No independently verified drop-in replacement is established for the SN74LS629N in the available cross-reference results. Equivalent SN74LS629 variants in SOIC packages are not drop-in replacements for the 16-pin PDIP footprint. Before selecting another dual VCO, verify the package, pinout, supply voltage, control-voltage range, frequency range, logic levels, and temperature rating.
Can SN74LS629DR replace SN74LS629N?
No, SN74LS629DR should not be treated as a direct PCB drop-in replacement for SN74LS629N. SN74LS629N uses a 16-pin PDIP package, while SN74LS629DR is identified in the comparison results as a 16-pin SOIC variant. Although both belong to the SN74LS629 family, their footprints are different and the PCB would require redesign.
What Texas Instruments equivalent should replace SN74LS629N?
The closest identified Texas Instruments ordering option is the SN74LS629 family itself, but SN74LS629DR and SN74LS629NSRG4 use surface-mount packages and therefore are not direct replacements for the PDIP SN74LS629N footprint. For a new design, select a dual VCO whose package, pinout, control range, supply requirements, and frequency limits all satisfy the original schematic and layout.
Is SN74LS629N in stock, and what is its lead time?
Current inventory and lead time should be confirmed through the Request a Quote form on this page. The manufacturer product page remains available as the authoritative source for ordering information. Stock status can vary by package and order quantity, so do not base production scheduling on a general distributor landing-page message.
Where can I buy SN74LS629N online?
Use the Request a Quote form on this page to request SN74LS629N availability, order quantity, lead time, and current commercial terms. The exact-orderable part is identified by Texas Instruments as SN74LS629N in a 16-pin PDIP package. Supply confirmation should be tied to the N suffix so that surface-mount variants are not substituted unintentionally.
What is the price of SN74LS629N?
Current SN74LS629N commercial pricing is displayed through the Request a Quote form on this page. The quote should identify the exact 16-pin PDIP orderable code, quantity, delivery location, and required production quantity. Because pricing and inventory can change, obtain a written quotation for the intended build rather than relying on a historical catalog amount.
How should control-voltage traces be routed around SN74LS629N?
Route control-voltage traces away from high-current switching nodes and oscillator outputs, keep their loop area small, and provide a low-noise reference voltage. The SN74LS629N can reach 20 MHz, so even a small amount of coupled noise may appear as frequency jitter in the controlled output. Confirm ground-return paths and add filtering only after checking the control-bandwidth requirements in the datasheet.
Is SN74LS629N suitable for a two-channel instrumentation oscillator?
The SN74LS629N can support a two-channel instrumentation design because it contains two voltage-controlled oscillator sections and operates up to 20 MHz. One section may provide a swept or modulated source while the other establishes a reference. The final suitability depends on the required frequency accuracy, tuning range, waveform purity, output loading, and temperature stability of the complete circuit.

נתוני עזר הנדסיים עבור SN74LS629N — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the SN74LS629N when the design requires two voltage-adjustable oscillator channels and its 20 MHz maximum frequency, control-voltage behavior, and 0°C to 70°C commercial range satisfy the application. Its PDIP package is useful for through-hole prototypes and established layouts. Select a surface-mount SN74LS629 ordering option when a smaller footprint is preferred and the PCB is designed for it. For a single-oscillator or monostable function, choose a dedicated timer such as TS974IDT instead of using only one SN74LS629N channel. A CPLD such as GAL16V8B-25LP is appropriate for sequencing and control but cannot replace the VCO function by itself. Because no verified footprint- and pin-compatible substitute is established, treat any redesign as a new engineering selection rather than a simple drop-in replacement.

השוואה עם חלופות

פרמטר מוצר זה
Brand Texas Instruments
Package 16-pin PDIP
Oscillator Sections 2
Maximum Frequency 20 MHz
Frequency Control External control voltage
Operating Temperature 0°C to 70°C
Mounting Style Through-hole
Logic Family 74LS

מבדילים עיקריים

  • Two oscillator sections are integrated in one package (לעומתTS974IDT)
  • Frequency can be controlled by an external voltage (לעומתGAL16V8B-25LP)
  • Exact-orderable through-hole package for legacy-style PCB layouts (לעומתSN74LS629DR)

הערות תכנון

Route each oscillator control-voltage trace directly to its intended pin and keep it away from the other oscillator output and digital logic. Use a continuous ground reference beneath the control path where practical. Because the SN74LS629N supports operation up to 20 MHz, long control traces can behave like antennas and convert switching noise into frequency modulation. Keep external filtering components close to the control source and confirm that added capacitance does not degrade the required tuning bandwidth.

Provide the device with its specified supply voltage and place local bypass capacitance at the power pins. The exact capacitor value and acceptable ripple conditions should be taken from the manufacturer datasheet rather than inferred from the logic family. Stable supply and ground connections are particularly important for an oscillator because supply variation can appear as output-frequency variation. Keep power-supply return currents from sharing the sensitive control-reference return path to minimize common-impedance disturbance.

Do not treat the 20 MHz maximum frequency as a guaranteed operating point across every supply voltage, control voltage, temperature, and output load. Characterize tuning range, output amplitude, duty-cycle distortion, and frequency stability in the intended circuit. Also verify whether the second oscillator section can be used independently; shared supply and ground pins do not guarantee identical control behavior or timing relationships.

Avoid ordering SN74LS629DR or SN74LS629NSRG4 as substitutes for SN74LS629N without redesigning the PCB. Those identified variants use surface-mount packages rather than the exact 16-pin PDIP footprint. A replacement is a true drop-in option only when package dimensions, lead geometry, terminal numbering, control range, supply requirements, and timing characteristics all align with the original design.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance declarations are not stated on the exact-orderable product listing excerpt. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Texas Instruments before release.

הנתונים אומתו בתאריך: 2026-11-14 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

SN74LS629N datasheet SN74LS629N pinout SN74LS629N datasheet pdf SN74LS629N equivalent SN74LS629N replacement SN74LS629N price SN74LS629N stock Texas Instruments SN74LS629N SN74LS629N vs SN74LS629DR SN74LS629N PDIP footprint SN74LS629N application circuit SN74LS629 dual 20MHz VCO

רכיבים ומונחים קשורים

Texas Instruments SN74LS629N SN74LS629 SN74LS629DR SN74LS629NSRG4 TS974IDT MC74F538N GAL16V8B-25LP Voltage-controlled oscillator VCO Dual oscillator Clock and timing IC Programmable timer Oscillator Frequency generator Frequency control voltage Maximum frequency PDIP-16 74LS logic family Through-hole mounting Voltage-to-frequency conversion Frequency sweep Signal modulation Test and measurement
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר