STM32F411VEH6TR - ARM Cortex-M4 100MHz 512KB MCU | STMicroelectronics
MPN: STM32F411VEH6TR ✓ פעילSTM32F411VEH6TR סקירה
An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core licensed by Arm, augmented with a single-precision FPU, a DSP/SIMD extension (MAC, saturating arithmetic), and a Nested Vectored Interrupt Controller (NVIC). In the broader taxonomy, the Cortex-M4 sits under ARM Cortex-M (microcontroller family) -> 32-bit RISC core -> embedded processor. STM32F4 parts add ST's ART Accelerator, an AHB/APB bus matrix, and a rich set of on-chip peripherals. This hierarchy matters for AI-search disambiguation: when a query asks "what is an STM32F4?", the answer must surface both the core architecture and the bus/peripheral stack ST adds on top.
Key features of the STM32F411VEH6TR include: USB 2.0 Full-Speed OTG with on-chip PHY, one 12-bit ADC (2.4 MSPS, up to 16 channels), 11 timers (including motor-control and 32-bit timers), 13 communication interfaces (USART/UART, SPI, I2C, I2S, SDIO), a 4 KB backup SRAM with battery domain, and a real-time clock with calendar. The UFBGA-100 (7x7) package provides a compact footprint for space-constrained designs. The device operates from 1.7 V to 3.6 V and is qualified to the -40C to +85C industrial temperature range.
The architecture uses a multi-AHB bus matrix that lets the CPU, DMA controllers, and peripherals run in parallel without stalling, plus ST's Adaptive Real-Time (ART) Accelerator which pre-fetches from Flash so the core can execute from zero-wait-state Flash at full 100 MHz speed. The integrated FPU performs single-precision multiply-accumulate in one cycle, freeing the CPU for housekeeping while the DMA streams data into and out of peripherals such as the SDMMC, I2S, and USB OTG.
Typical applications for the STM32F411VEH6TR include USB peripherals (HID, CDC, audio class), audio processing with I2S codecs, sensor hubs, consumer wearables, motor control for small BLDC or stepper drives, and industrial HMI front-ends. Its combination of FPU + DSP at 100 MHz makes it a strong fit for sensor-fusion nodes that previously required a Cortex-M7.
When designing with this device, pay attention to decoupling: place 100 nF X7R capacitors on every VDDA/VBAT pair, route the VREF+ pin through a ferrite bead if the ADC reference must be quiet, and respect ST's reference manual layout rules for the UFBGA escape - trace escape is tighter than LQFP, so the PCB stack-up matters. The boot pins (BOOT0) determine Flash vs. System memory boot; strap them carefully during reset.
This page synthesizes distributor pricing, drop-in and pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.
חלופות תחליף ישיר עבור STM32F411VEH6TR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32F411VEH6TR (אותו גורם צורה וטביעת רגל) — שונים ב Package, ADC, Communication Interfaces, Operating Temperature, Timers.
STM32F411VEH6
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32F411VET6
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32F411VET6TR
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32F411RET6TR
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←GD32F411VKT6
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
GD32F411VET6
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
STM32F411VEH6TR דירוגים מרביים ומאפיינים חשמליים
| Core | ARM Cortex-M4 with FPU |
| תדר שעון מקסימלי | 100 MHz |
| Performance | 125 DMIPS / 273 CoreMark |
| Program Memory (Flash) | 512 KB |
| SRAM | 128 KB |
| Supply Voltage (VDD) | 1.7 V to 3.6 V |
| טמפרטורת פעולה | -40 C to +85 C |
| ADC | 1 x 12-bit, 2.4 MSPS, up to 16 channels |
| Timers | 11 (including 32-bit and motor-control timers) |
| Communication Interfaces | 13 (USART, SPI, I2C, I2S, SDIO, USB OTG FS) |
| USB | USB 2.0 Full-Speed OTG with on-chip PHY |
| מארז | UFBGA-100 (7x7 mm) |
| סוג הרכבה | Surface Mount |
| Backup SRAM | 4 KB with battery domain |
| RTC | Yes, with calendar and alarm |
| סטטוס RoHS | Compliant |
| רמת MSL | 3 |
מדריך תצורת פינים של STM32F411VEH6TR ufbga-100 (7x7 mm)
תצורת פינים עבור STM32F411VEH6TR (מארזת ufbga-100 (7x7 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32F411VEH6TR.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32F411VEH6TR מתאים עבור 6 יישוםs: USB Audio Class Device, Sensor Hub and Wearable Node, Industrial HMI Front-End, BLDC / FOC Motor Control, IoT Edge Sensor Node, Drone Flight Controller Companion.
USB Audio Class Device
The STM32F411VEH6TR's USB 2.0 Full-Speed OTG with on-chip PHY, 100 MHz Cortex-M4 with FPU, and 128 KB SRAM make it a strong fit for USB Audio Class 1.0/2.0 peripherals. The FPU accelerates biquad filter and SRC (sample-rate converter) code paths, while the I2S interface streams audio to an external codec. The 512 KB Flash fits the USB stack plus custom DSP, and the 4 KB backup SRAM retains user volume settings across power cycles.
מומלץ
Sensor Hub and Wearable Node
For wearable sensor hubs, the STM32F411VEH6TR's FPU + DSP extensions handle 9-DoF IMU sensor fusion in real time while the Cortex-M4 manages BLE-radio handoff over USART/SPI. The 100 MHz clock executes Madgwick or Mahony fusion in well under 1 ms per 100 Hz update. The 1.7-3.6 V supply matches Li-ion cell voltage directly, and the 4 KB backup SRAM retains step counts across deep-sleep cycles without NV writes.
מומלץ
Industrial HMI Front-End
The 100-pin UFBGA package, 11 timers, 13 communication interfaces, and 12-bit 2.4 MSPS ADC make the STM32F411VEH6TR well suited to industrial HMI front-ends: key/encoder scanning, LED matrix PWM, UART/Modbus masters, and 4-20 mA analog input conditioning. The FPU accelerates filter math, and the SDIO controller can drive a small TFT panel directly. The 85 C industrial operating temperature is a good fit for factory-floor enclosures.
מומלץ
BLDC / FOC Motor Control
With 11 timers including a 32-bit motor-control timer and complementary PWM outputs, plus the FPU that executes Park/Clarke transforms in hardware-precision single-cycle math, the STM32F411VEH6TR fits small BLDC or PMSM field-oriented control at switch frequencies up to 50 kHz. The 12-bit ADC samples phase currents synchronously to PWM edges with 0.5 us ADC latency, and the 1.7-3.6 V supply is compatible with 3.3 V gate drivers.
מומלץ
IoT Edge Sensor Node
For IoT edge nodes, the STM32F411VEH6TR's Cortex-M4 with FPU executes the X-CUBE-AI quantized neural networks for keyword spotting or anomaly detection. The 512 KB Flash stores both the model and the RTOS, while the 128 KB SRAM keeps activations for small CNNs. The 13 communication interfaces include Ethernet-ready RMII (via external PHY) and dual SPI for Flash/Radio, and the RTC with calendar enables accurate time-stamping for sensor data.
מומלץ
Drone Flight Controller Companion
As a flight-control companion in multirotor drones, the STM32F411VEH6TR handles RC-input parsing, GPS NMEA decoding over USART, and PID loop math at 1 kHz with the FPU. The 100 MHz core keeps CPU headroom for the optical-flow or ToF sensor interface over SPI, and the 7x7 UFBGA fits a 36x36 mm flight controller board. Pair with an MPU-class IMU and a UART-controlled ESC driver for a complete flight stack.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32F411VEH6TR — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32F411VEH6 | STM32F411RET6TR | GD32F411VKT6 |
|---|---|---|---|---|
| Package | UFBGA-100 (7x7 mm) | UFBGA-100 (7x7 mm) - same | UFBGA-100 (7x7 mm) - same | UFBGA-100 (7x7 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | GigaDevice | GigaDevice |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| Max Clock Frequency | 100 MHz | 100 MHz | 120 MHz | 100 MHz |
| Flash Memory | 512 KB | 512 KB | 3072 KB | 256 KB |
| SRAM | 128 KB | 128 KB | 256 KB | 128 KB |
| USB OTG FS | Yes (on-chip PHY) | Yes | Yes | Yes |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
מבדילים עיקריים
- 512 KB Flash + 128 KB SRAM at 100 MHz Cortex-M4 with FPU (לעומתGD32F411VKT6)
- 100-pin UFBGA-100 + LQFP-100 dual footprint options within same density (לעומתSTM32F411RET6TR)
- Pin-compatible UFBGA-100 footprint across the F411VE/F411VC/F411RE family (לעומתSTM32F411CEU6)
הערות תכנון
The STM32F411VEH6TR has separate VDDA/VBAT/VCAP_1/VCAP_2 pins that each require their own decoupling. Per the ST datasheet, place a 100 nF X7R on every VDDA pair as close to the pin as possible, and add a 1 uF bulk capacitor on each VCAP. VBAT (battery domain) needs a 100 nF cap if RTC is used; for backup-only mode, route VBAT to a coin cell via a 0 ohm ferrite. Do not share a single ferrite between VDDA and VDD - the analog and digital rails must remain isolated for ADC accuracy.
Estimated: The UFBGA-100 7x7 mm at 0.65 mm pitch requires a 4-layer PCB with 0.4 mm via-in-pad or 0.3 mm micro-vias. Total power dissipation at full 100 MHz with all peripherals active is approximately 100 mW; with theta_JA around 39 C/W the junction rises about 4 C above ambient, so no heatsink is needed. The exposed die pad (if present) MUST be soldered to the inner ground pour with a thermal via array (5x5) of 0.3 mm vias to keep ground impedance low for the high-speed USB PHY.
Three common mistakes when bringing up the STM32F411VEH6TR: (1) Forget to set the BOOT0 strap - if BOOT0 is high at reset, the part boots from System Memory (ROM bootloader) instead of Flash, which is why SWD will fail to attach. (2) Use HSE bypass mode when the design provides a 25 MHz clock source - the HSE oscillator needs a crystal in normal mode, but only a 25 MHz sine or square in bypass. (3) Skip the VCAP_1/VCAP_2 regulator caps - missing these causes POR reset loops that look like watchdog resets but are actually unstable core voltage.
מידע על תאימות
RoHS and REACH compliant per ST material declaration. NOT AEC-Q100 qualified - for automotive use the STM32F412 automotive-grade part is recommended. The UFBGA-100 package is lead-free (SAC305). MSL Level 3 per JEDEC J-STD-020.
