STM32F412RGT6 - 100MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32F412RGT6 ✓ פעילSTM32F412RGT6 סקירה
A microcontroller, or MCU, integrates a processor core, memory, and peripheral interfaces on one semiconductor package. In the product hierarchy, the STM32F412 belongs to the STM32 family of 32-bit embedded microcontrollers and uses an Arm Cortex-M4 RISC core. Its combination of deterministic control, substantial memory, USB connectivity, and efficient DMA-based data movement makes it suitable for connected industrial, consumer, medical, and communications equipment.
Three headline characteristics define this device. The Cortex-M4 core operates at up to 100 MHz and delivers 125 DMIPS. Its 1 MB flash permits larger embedded applications and firmware, while 256 KB of SRAM supports working buffers and real-time data processing. The integrated FPU accelerates floating-point calculations, and DSP instructions support filtering and signal-processing workloads. A dedicated USB OTG FS interface adds USB connectivity without requiring a separate controller.
The peripheral set includes 17 timers, one ADC, and 17 communication interfaces. These resources allow the MCU to combine control-loop timing, analog measurement, serial communications, and USB device or host behavior in one design. The STM32F412 family also emphasizes smart DMA and dynamic efficiency, allowing data transfers and low-power operation to complement its 100 MHz processing performance.
Typical applications include USB-connected data acquisition, industrial control and monitoring, digital audio and sensor products, compact consumer devices, and embedded communications equipment. The 1 MB flash capacity is particularly useful when a product requires local data storage, networking code, USB stack support, and application firmware within one controller. The 256 KB SRAM also permits larger buffers than would be practical with many entry-level MCUs.
PCB design should preserve clean power, ground, decoupling, clock, and signal routing. Place the required bypass capacitors close to their supply pins, keep high-current return paths compact, and follow the pin-description and recommended-layout tables in the manufacturer datasheet. Confirm crystal, boot, reset, and debug connections before routing the 64-LQFP footprint.
This page combines the verified device specifications, strict same-package replacement candidates, comparison parameters, and practical integration guidance for engineers evaluating the STM32F412RGT6. The alternatives are restricted to documented or same-family candidates rather than general-purpose microcontrollers with incompatible footprints.
חלופות תחליף ישיר עבור STM32F412RGT6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32F412RGT6 (אותו גורם צורה וטביעת רגל) — שונים ב Package, ADC, Timers, Flash Memory, Communication Interfaces.
STM32F411RGT6
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
STM32F412RET6
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32F411RCT6
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32F412RGT6 דירוגים מרביים ומאפיינים חשמליים
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| CPU Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 100 MHz |
| Performance | 125 DMIPS |
| Instruction Set | 32-bit RISC |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 256 KB |
| FPU | Single-precision floating-point unit |
| DSP Support | DSP instructions |
| USB Interface | USB OTG FS |
| Timer Count | 17 timers |
| ADC Count | 1 ADC |
| Communication Interface Count | 17 communication interfaces |
| Data Transfer | Smart DMA |
| Operating Voltage | 2.4 V / 3.3 V |
| מארז | 64-LQFP (10 x 10 mm) |
| סוג הרכבה | Surface mount |
| Shipping Format | Tray |
מדריך תצורת פינים של STM32F412RGT6 64-lqfp (10 x 10 mm)
תצורת פינים עבור STM32F412RGT6 (מארזת 64-lqfp (10 x 10 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור STM32F412RGT6.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
STM32F412RGT6 מתאים עבור 6 יישוםs: USB Data Acquisition, Industrial Control and Monitoring, Digital Audio and Sensor Processing, USB-Consumer and Wearable Devices, Communications Gateway, Medical and Diagnostic Instrument.
USB Data Acquisition
The STM32F412RGT6 fits USB data-acquisition equipment because it combines USB OTG FS with a 100 MHz Arm Cortex-M4 core, 1 MB flash, and 256 KB SRAM. The MCU can sample with one integrated ADC, timestamp events with 17 available timers, and transfer data through USB while DSP instructions and the single-precision FPU perform filtering. Smart DMA can move sampled data without excessive CPU intervention. Designers should allocate DMA-accessible memory carefully, validate USB enumeration behavior with the selected firmware stack, and keep analog and digital return paths separated to prevent acquisition noise from coupling into the measurement chain.
מומלץ
Industrial Control and Monitoring
The STM32F412RGT6 is appropriate for industrial control and monitoring platforms that need deterministic timing, flexible serial connectivity, and local firmware capacity. Its Cortex-M4 core operates at up to 100 MHz and delivers 125 DMIPS, while 17 timers support periodic sampling, motor timing, or machine-control sequences. Seventeen communication interfaces allow multiple serial protocols to coexist, and the 256 KB SRAM provides useful working space for protocol and control buffers. Keep supply rails stable near the device, use appropriate industrial temperature parts when required, and validate watchdog and brownout settings for the field environment.
מומלץ
Digital Audio and Sensor Processing
The STM32F412RGT6 suits digital audio and advanced sensor-processing products that benefit from DSP acceleration, an FPU, and 256 KB of SRAM. The Cortex-M4 core executes at up to 100 MHz with performance of 125 DMIPS, allowing filtering and control calculations to run alongside USB communication. Seventeen timers can support precise sample-rate or actuator timing, while the ADC provides an analog input path for sensors. Place analog components away from high-switching USB and clock traces, maintain a short return path for sensitive signals, and size decoupling capacitors according to the recommended application circuit.
מומלץ
USB-Consumer and Wearable Devices
The STM32F412RGT6 fits compact USB-enabled consumer products that need more code and RAM than a basic microcontroller while retaining a 10 x 10 mm LQFP footprint. Its 1 MB flash accommodates USB stacks, user-interface logic, and application firmware, while the 256 KB SRAM supports packet buffers and application state. The 100 MHz Cortex-M4 core can handle protocol tasks and control logic without requiring a separate USB controller. Board designers should minimize the USB trace path, provide compliant USB routing and grounding, and validate low-power transitions if the product uses a battery or energy-harvesting source.
מומלץ
Communications Gateway
The STM32F412RGT6 can serve as the control processor in a compact communications gateway that bridges USB with one or more serial interfaces. Seventeen communication interfaces provide a broad peripheral base, the smart DMA subsystem supports efficient data batching, and the 256 KB SRAM reduces the pressure on the CPU during protocol translation. At up to 100 MHz, the Cortex-M4 core leaves processing capacity for framing, routing, diagnostics, and local configuration. Validate buffering under worst-case traffic, isolate external transceiver routing from sensitive clock lines, and confirm the final communications peripheral mapping against the exact package pin table.
מומלץ
Medical and Diagnostic Instrument
The STM32F412RGT6 is suitable for compact medical monitoring and diagnostic instruments when USB connectivity, deterministic timers, and numerical processing are required in one controller. The single ADC supports analog front-end interfacing, while 17 timers can organize acquisition, timing, and output-control events. Its Cortex-M4 FPU and DSP instructions support filtering and calibration calculations, and 1 MB flash leaves room for control, logging, and USB firmware. Use isolated, low-leakage analog routing for patient-connected circuits, maintain defined separation from USB and power sections, and verify medical regulatory requirements independently of component selection.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32F412RGT6 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32F411RGT6 | STM32F412RET6 | STM32F411RCT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| USB Interface | USB OTG FS | USB OTG FS | USB OTG FS | USB OTG FS |
מבדילים עיקריים
- Largest flash option among the listed same-package alternatives (לעומתSTM32F412RET6)
- Substantially larger code-storage margin than the STM32F411RCT6 candidate (לעומתSTM32F411RCT6)
- Broader STM32F412 peripheral specification within the same LQFP footprint (לעומתSTM32F411RGT6)
- Identical 100 MHz Cortex-M4 performance class across the alternatives (לעומתSTM32F411RGT6)
הערות תכנון
Place all required decoupling capacitors immediately beside the STM32F412RGT6 supply and ground pins, following the manufacturer application diagram for capacitance and placement. Keep the USB transceiver and external analog circuitry on appropriately separated supply paths. Check voltage selection against the 2.4 V and 3.3 V configuration identified for the device, and account for startup current when the board also powers USB or analog loads.
Route the 100 MHz clock circuit as a short, continuous path between the oscillator or crystal and the designated pins, with its ground return referenced as closely as possible. Avoid crossing USB differential traces with clock or ADC signals. Use continuous ground planes where practical, provide adequate via density beneath the LQFP perimeter, and follow the manufacturer land-pattern dimensions for the 64-LQFP 10 x 10 mm footprint.
Assign all 64 LQFP positions directly from the STM32F412xG pin-description table, including reset, boot, debug, clock, and supply pins. Verify unused pins against the electrical guidance rather than assuming they may be left unconnected. Because several alternatives use the same footprint but differ in memory and peripheral options, a mechanically compatible substitution still requires a complete software and pin-function review.
For USB OTG FS operation, preserve the impedance and symmetry of the USB data pair, minimize stub lengths, and follow the transceiver manufacturer's routing guidance. Keep the MCU and USB circuitry on the same ground reference and position ESD protection close to the external connector. If the ADC is used for precision measurements, isolate analog inputs from digital and USB return currents and validate filtering against the actual signal bandwidth.
Do not approve a substitute solely because it fits the 64-LQFP footprint. The STM32F412RET6 has 512 KB rather than 1 MB flash, while STM32F411-family candidates may have different SRAM, peripheral, clock, and low-power capabilities. Check bootloader image size, linker-memory configuration, USB support, timer mapping, DMA channels, and firmware driver compatibility before releasing a replacement to production.
מידע על תאימות
The component records do not explicitly state the required environmental or material compliance statuses. The STM32F412 family is an industrial/consumer embedded microcontroller rather than an explicitly automotive-qualified device, but AEC-Q100 status remains unconfirmed.