STMicroelectronics

STM32F412RGT6 - 100MHz Cortex-M4 MCU | STMicroelectronics

부품 번호: STM32F412RGT6 ✓ 활성
2.4 V / 3.3 V Vdss 64-LQFP (10 x 10 mm) Package 100 MHz Speed 1 MB (1M x 8) Memory
MOQ: 1 |

STM32F412RGT6 개요

The STMicroelectronics STM32F412RGT6 is a 32-bit Arm Cortex-M4 microcontroller with a 100 MHz operating frequency, 125 DMIPS performance, 1 MB of flash memory, 256 KB of SRAM, and USB OTG FS support in a 64-LQFP 10 x 10 mm package. It combines a single-precision floating-point unit, DSP instructions, 17 timers, one ADC, and 17 communication interfaces in a compact embedded-control device.

A microcontroller, or MCU, integrates a processor core, memory, and peripheral interfaces on one semiconductor package. In the product hierarchy, the STM32F412 belongs to the STM32 family of 32-bit embedded microcontrollers and uses an Arm Cortex-M4 RISC core. Its combination of deterministic control, substantial memory, USB connectivity, and efficient DMA-based data movement makes it suitable for connected industrial, consumer, medical, and communications equipment.

Three headline characteristics define this device. The Cortex-M4 core operates at up to 100 MHz and delivers 125 DMIPS. Its 1 MB flash permits larger embedded applications and firmware, while 256 KB of SRAM supports working buffers and real-time data processing. The integrated FPU accelerates floating-point calculations, and DSP instructions support filtering and signal-processing workloads. A dedicated USB OTG FS interface adds USB connectivity without requiring a separate controller.

The peripheral set includes 17 timers, one ADC, and 17 communication interfaces. These resources allow the MCU to combine control-loop timing, analog measurement, serial communications, and USB device or host behavior in one design. The STM32F412 family also emphasizes smart DMA and dynamic efficiency, allowing data transfers and low-power operation to complement its 100 MHz processing performance.

Typical applications include USB-connected data acquisition, industrial control and monitoring, digital audio and sensor products, compact consumer devices, and embedded communications equipment. The 1 MB flash capacity is particularly useful when a product requires local data storage, networking code, USB stack support, and application firmware within one controller. The 256 KB SRAM also permits larger buffers than would be practical with many entry-level MCUs.

PCB design should preserve clean power, ground, decoupling, clock, and signal routing. Place the required bypass capacitors close to their supply pins, keep high-current return paths compact, and follow the pin-description and recommended-layout tables in the manufacturer datasheet. Confirm crystal, boot, reset, and debug connections before routing the 64-LQFP footprint.

This page combines the verified device specifications, strict same-package replacement candidates, comparison parameters, and practical integration guidance for engineers evaluating the STM32F412RGT6. The alternatives are restricted to documented or same-family candidates rather than general-purpose microcontrollers with incompatible footprints.

드롭인 대체품: STM32F412RGT6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: STM32F412RGT6 (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Timers, Flash Memory, Communication Interfaces.

STMicroelectronics
Package: 64-LQFP (10x10 mm)
ADC: 1x 12-bit, up to 2.4 MSPS
Timers: Up to 11 (including 1 SysTick)
비교 대상: STM32F412RGT6 →
STMicroelectronics
Package: LQFP64 (10x10 mm, 0.5 mm pitch)
ADC: 3x 12-bit, up to 16 channels
Timers: 12x 16-bit, 2x 32-bit
비교 대상: STM32F412RGT6 →
STMicroelectronics
Package: 64-LQFP (10x10 mm)
ADC: 12-bit, up to 16 channels
Timers: 16-bit advanced-control timer with PWM
비교 대상: STM32F412RGT6 →

STM32F411RGT6

✅ 드롭인 ⚠️ 사양 미검증
📦 64-LQFP (10 x 10 mm)
Same 100 MHz Cortex-M4 architecture and 64-LQFP footprint, but memory capacity and available peripherals differ and require validation

📋 참조 대체품 (카탈로그에 없음)

STM32F412RET6

✅ 드롭인 ⚠️ 사양 미검증
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M4F with FPU · 100 MHz · 512 KB · 256 KB · 1.7 V to 3.6 V · -40C to +85C · LQFP64 (10x10 mm, 0.5 mm pitch) · 50

가격 문의

데이터시트 보기 →

STM32F411RCT6

✅ 드롭인
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M4 with FPU and DSP · 100 MHz · 256 KB Flash · 128 KB SRAM · 1.7 V to 3.6 V · -40C to +85/105/125C · 64-LQFP (10x10 mm) · Surface Mount

가격 문의

데이터시트 보기 →

STM32F412RGT6 최대 정격 & 전기적 특성

Product Type 32-bit ARM Cortex-M4 microcontroller
CPU Core Arm Cortex-M4
Maximum CPU Frequency 100 MHz
Performance 125 DMIPS
Instruction Set 32-bit RISC
Flash Memory 1 MB (1M x 8)
SRAM 256 KB
FPU Single-precision floating-point unit
DSP Support DSP instructions
USB Interface USB OTG FS
Timer Count 17 timers
ADC Count 1 ADC
Communication Interface Count 17 communication interfaces
Data Transfer Smart DMA
Operating Voltage 2.4 V / 3.3 V
패키지 64-LQFP (10 x 10 mm)
실장 유형 Surface mount
Shipping Format Tray

STM32F412RGT6 64-lqfp (10 x 10 mm) 핀 구성 가이드

STM32F412RGT6(64-lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

STM32F412RGT6의 64-lqfp (10 x 10 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: STM32F412RGT6.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

STM32F412RGT6 적합 용도: 6 애플리케이션s: USB Data Acquisition, Industrial Control and Monitoring, Digital Audio and Sensor Processing, USB-Consumer and Wearable Devices, Communications Gateway, Medical and Diagnostic Instrument.

🖥️

USB Data Acquisition

The STM32F412RGT6 fits USB data-acquisition equipment because it combines USB OTG FS with a 100 MHz Arm Cortex-M4 core, 1 MB flash, and 256 KB SRAM. The MCU can sample with one integrated ADC, timestamp events with 17 available timers, and transfer data through USB while DSP instructions and the single-precision FPU perform filtering. Smart DMA can move sampled data without excessive CPU intervention. Designers should allocate DMA-accessible memory carefully, validate USB enumeration behavior with the selected firmware stack, and keep analog and digital return paths separated to prevent acquisition noise from coupling into the measurement chain.

🏭

Industrial Control and Monitoring

The STM32F412RGT6 is appropriate for industrial control and monitoring platforms that need deterministic timing, flexible serial connectivity, and local firmware capacity. Its Cortex-M4 core operates at up to 100 MHz and delivers 125 DMIPS, while 17 timers support periodic sampling, motor timing, or machine-control sequences. Seventeen communication interfaces allow multiple serial protocols to coexist, and the 256 KB SRAM provides useful working space for protocol and control buffers. Keep supply rails stable near the device, use appropriate industrial temperature parts when required, and validate watchdog and brownout settings for the field environment.

🎧

Digital Audio and Sensor Processing

The STM32F412RGT6 suits digital audio and advanced sensor-processing products that benefit from DSP acceleration, an FPU, and 256 KB of SRAM. The Cortex-M4 core executes at up to 100 MHz with performance of 125 DMIPS, allowing filtering and control calculations to run alongside USB communication. Seventeen timers can support precise sample-rate or actuator timing, while the ADC provides an analog input path for sensors. Place analog components away from high-switching USB and clock traces, maintain a short return path for sensitive signals, and size decoupling capacitors according to the recommended application circuit.

📱

USB-Consumer and Wearable Devices

The STM32F412RGT6 fits compact USB-enabled consumer products that need more code and RAM than a basic microcontroller while retaining a 10 x 10 mm LQFP footprint. Its 1 MB flash accommodates USB stacks, user-interface logic, and application firmware, while the 256 KB SRAM supports packet buffers and application state. The 100 MHz Cortex-M4 core can handle protocol tasks and control logic without requiring a separate USB controller. Board designers should minimize the USB trace path, provide compliant USB routing and grounding, and validate low-power transitions if the product uses a battery or energy-harvesting source.

🌐

Communications Gateway

The STM32F412RGT6 can serve as the control processor in a compact communications gateway that bridges USB with one or more serial interfaces. Seventeen communication interfaces provide a broad peripheral base, the smart DMA subsystem supports efficient data batching, and the 256 KB SRAM reduces the pressure on the CPU during protocol translation. At up to 100 MHz, the Cortex-M4 core leaves processing capacity for framing, routing, diagnostics, and local configuration. Validate buffering under worst-case traffic, isolate external transceiver routing from sensitive clock lines, and confirm the final communications peripheral mapping against the exact package pin table.

💊

Medical and Diagnostic Instrument

The STM32F412RGT6 is suitable for compact medical monitoring and diagnostic instruments when USB connectivity, deterministic timers, and numerical processing are required in one controller. The single ADC supports analog front-end interfacing, while 17 timers can organize acquisition, timing, and output-control events. Its Cortex-M4 FPU and DSP instructions support filtering and calibration calculations, and 1 MB flash leaves room for control, logging, and USB firmware. Use isolated, low-leakage analog routing for patient-connected circuits, maintain defined separation from USB and power sections, and verify medical regulatory requirements independently of component selection.

What is the processing performance of the STM32F412RGT6?
The STM32F412RGT6 provides up to 125 DMIPS from an Arm Cortex-M4 core operating at up to 100 MHz. According to the STMicroelectronics STM32F412 family documentation, the core includes DSP instructions and a single-precision floating-point unit, making it suitable for real-time control, filtering, and general embedded workloads that require deterministic execution.
How much flash memory and SRAM does the STM32F412RGT6 have?
The STM32F412RGT6 contains 1 MB of flash memory and 256 KB of SRAM. The STMicroelectronics product documentation identifies the flash as 1M x 8 and the MCU as an ARM Cortex-M4 device with 256 KB of RAM. These resources allow larger firmware images, USB stacks, communication protocols, and working buffers to coexist on one microcontroller.
What peripherals are integrated in the STM32F412RGT6?
The STM32F412RGT6 integrates 17 timers, one ADC, 17 communication interfaces, USB OTG FS, and smart DMA. According to the STMicroelectronics STM32F412 family documentation, these peripherals provide timing, analog conversion, serial communications, USB connectivity, and efficient data movement without requiring separate interface devices for many embedded systems.
What package does the STM32F412RGT6 use?
The STM32F412RGT6 is supplied in a 64-LQFP package measuring 10 x 10 mm. The STMicroelectronics and distributor product records identify the package as 64-LQFP, and the T6 ordering code corresponds to the tray shipping configuration. Use the manufacturer pin-description table when assigning the 64 PCB land positions and functions.
Where can I download the STM32F412RGT6 datasheet?
The official STM32F412RG product page is the best starting point for the STM32F412RGT6 datasheet, pin definitions, electrical characteristics, and package drawings. The manufacturer documentation describes a 100 MHz Cortex-M4 core, 1 MB flash, and 256 KB SRAM. Download the current datasheet and its referenced technical documents from that official page.
Where can I find the STM32F412RGT6 pinout?
The STM32F412RGT6 pinout is documented in the pin-description and package drawings within the official STM32F412 family documentation. Because the device uses a 64-LQFP footprint, all 64 positions must be checked against the exact STM32F412xG variant before PCB routing. Assign power, ground, reset, boot, clock, debug, and peripheral signals from those tables.
Is the STM32F412RGT6 suitable for USB-connected embedded devices?
Yes, the STM32F412RGT6 is suitable for USB-connected embedded devices because it includes USB OTG FS, a 100 MHz Cortex-M4 core, 1 MB flash, and 256 KB SRAM. According to the STMicroelectronics STM32F412 documentation, USB OTG FS supports integrated USB connectivity, while DMA and the large SRAM help manage data movement and protocol buffering.
Can STM32F412RGT6 handle DSP and floating-point calculations?
The STM32F412RGT6 can handle DSP and floating-point calculations because its Arm Cortex-M4 core includes DSP instructions and a single-precision FPU. STMicroelectronics specifies performance of up to 125 DMIPS at 100 MHz. These features benefit digital filtering, sensor conditioning, audio-related processing, and other control algorithms with recurring numerical operations.
STM32F412RGT6 vs STM32F411RGT6: which MCU fits the design?
The STM32F412RGT6 is the stronger choice when a design benefits from 1 MB flash, 256 KB SRAM, USB OTG FS, 17 timers, and 17 communication interfaces. The STM32F411RGT6 is a 100 MHz Cortex-M4 alternative in the same LQFP class, but its peripheral mix and memory configuration should be checked against the manufacturer tables before substitution.
When should I choose the STM32F412RGT6 over an STM32F411-family MCU?
Choose the STM32F412RGT6 when firmware size, SRAM depth, USB OTG FS, and the broader 17-timer and 17-interface peripheral set justify the STM32F4 specification. It combines a 100 MHz Cortex-M4 core with 1 MB flash and 256 KB SRAM. An STM32F411-family option may be preferable only after verifying that every required peripheral, memory margin, and clocking feature is equivalent.
What is the best drop-in replacement for the STM32F412RGT6?
The closest documented drop-in candidate is the STM32F411RGT6 because it belongs to the STM32F4 Cortex-M4 family and uses the same 64-LQFP class, but firmware and peripheral differences still require validation. The STM32F412RET6 and STM32F411RCT6 are additional same-package candidates with reduced flash capacity. No substitute should be approved without a complete pin, electrical, clock, peripheral, and firmware review.
Can an STM32F412RGT6 replace an STM32F411RCT6?
The STM32F412RGT6 can physically fit a 64-LQFP board, but physical fit alone does not establish a safe replacement. The target has 1 MB flash and 256 KB SRAM, while an STM32F411RCT6 commonly has less flash and SRAM. Check the exact alternate part's memory limits, pin functions, clock tree, peripherals, boot behavior, and firmware before making the substitution.
Where can I buy STM32F412RGT6 online?
Use the Request a Quote form on this page to request STM32F412RGT6 availability, order quantity, and current commercial terms. The manufacturer and distributor records confirm the exact MPN, 64-LQFP package, 100 MHz Cortex-M4 configuration, 1 MB flash, and 256 KB SRAM. The form avoids static quotations becoming outdated as inventory and sourcing conditions change.
What is the price of the STM32F412RGT6?
The current commercial price for the STM32F412RGT6 is returned through the Request a Quote form on this page. The device is a standard catalog MCU with a public manufacturer product page and a 64-LQFP tray configuration. Submit the required quantity and delivery information so the quotation reflects current component availability rather than a historical catalog figure.
What is the lead time and stock status for STM32F412RGT6?
Current stock, minimum order quantity, and lead time for the STM32F412RGT6 should be confirmed through the Request a Quote form on this page. Manufacturer product documentation identifies the part as a 100 MHz STM32F412 series MCU in a 64-LQFP package. A current sourcing response is required because production schedules and inventory can change independently of technical documentation.
What are the key specifications of STM32F412RGT6 that engineers should know?
The key STM32F412RGT6 specifications are a 100 MHz Arm Cortex-M4 core, up to 125 DMIPS, 1 MB flash, 256 KB SRAM, USB OTG FS, 17 timers, one ADC, 17 communication interfaces, smart DMA, and a 64-LQFP 10 x 10 mm package. According to STMicroelectronics, the device also includes DSP instructions and a single-precision floating-point unit.

엔지니어링 참조 데이터: STM32F412RGT6 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the STM32F412RGT6 when a design needs 1 MB flash, 256 KB SRAM, USB OTG FS, 17 timers, one ADC, and 17 communication interfaces in a 64-LQFP package. Choose STM32F412RET6 when the same STM32F412 family and peripheral set are required but 512 KB flash is sufficient; its lower code capacity may constrain USB stacks, logging, or future growth. Choose STM32F411RGT6 when its exact memory and peripheral configuration satisfies the application and the product can be validated without relying on the F412-specific interface set. STM32F411RCT6 is best considered only when 256 KB flash is sufficient. For every alternative, verify the complete 64-pin map, electrical limits, clock tree, bootloader behavior, peripheral assignment, and firmware-driver compatibility; a shared package alone does not guarantee interchangeable software.

대체품과의 비교

파라미터 이 제품 STM32F411RGT6 STM32F412RET6 STM32F411RCT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
CPU Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 100 MHz 100 MHz 100 MHz 100 MHz
USB Interface USB OTG FS USB OTG FS USB OTG FS USB OTG FS

주요 차별점

  • Largest flash option among the listed same-package alternatives (vs STM32F412RET6)
  • Substantially larger code-storage margin than the STM32F411RCT6 candidate (vs STM32F411RCT6)
  • Broader STM32F412 peripheral specification within the same LQFP footprint (vs STM32F411RGT6)
  • Identical 100 MHz Cortex-M4 performance class across the alternatives (vs STM32F411RGT6)

설계 노트

Place all required decoupling capacitors immediately beside the STM32F412RGT6 supply and ground pins, following the manufacturer application diagram for capacitance and placement. Keep the USB transceiver and external analog circuitry on appropriately separated supply paths. Check voltage selection against the 2.4 V and 3.3 V configuration identified for the device, and account for startup current when the board also powers USB or analog loads.

Route the 100 MHz clock circuit as a short, continuous path between the oscillator or crystal and the designated pins, with its ground return referenced as closely as possible. Avoid crossing USB differential traces with clock or ADC signals. Use continuous ground planes where practical, provide adequate via density beneath the LQFP perimeter, and follow the manufacturer land-pattern dimensions for the 64-LQFP 10 x 10 mm footprint.

Assign all 64 LQFP positions directly from the STM32F412xG pin-description table, including reset, boot, debug, clock, and supply pins. Verify unused pins against the electrical guidance rather than assuming they may be left unconnected. Because several alternatives use the same footprint but differ in memory and peripheral options, a mechanically compatible substitution still requires a complete software and pin-function review.

For USB OTG FS operation, preserve the impedance and symmetry of the USB data pair, minimize stub lengths, and follow the transceiver manufacturer's routing guidance. Keep the MCU and USB circuitry on the same ground reference and position ESD protection close to the external connector. If the ADC is used for precision measurements, isolate analog inputs from digital and USB return currents and validate filtering against the actual signal bandwidth.

Do not approve a substitute solely because it fits the 64-LQFP footprint. The STM32F412RET6 has 512 KB rather than 1 MB flash, while STM32F411-family candidates may have different SRAM, peripheral, clock, and low-power capabilities. Check bootloader image size, linker-memory configuration, USB support, timer mapping, DMA channels, and firmware driver compatibility before releasing a replacement to production.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The component records do not explicitly state the required environmental or material compliance statuses. The STM32F412 family is an industrial/consumer embedded microcontroller rather than an explicitly automotive-qualified device, but AEC-Q100 status remains unconfirmed.

관련 검색

STM32F412RGT6 datasheet STM32F412RGT6 pinout STM32F412RGT6 datasheet pdf STM32F412RGT6 specifications STM32F412RGT6 64-LQFP STM32F412RGT6 footprint STM32F412RGT6 replacement STM32F412RGT6 equivalent STM32F412RGT6 vs STM32F411RGT6 STM32F412RGT6 USB OTG FS STM32F412RGT6 price STM32F412RGT6 stock STMicroelectronics STM32F412RGT6 STM32F412RGT6 USB data acquisition STM32F412RGT6 100MHz Cortex-M4

관련 부품 & 용어

STMicroelectronics STM32F412RGT6 STM32F411RGT6 STM32F412RET6 STM32F411RCT6 STM32F4 STM32F412 Arm Cortex-M4 32-bit RISC microcontroller embedded microcontroller MCU single-precision FPU DSP instructions USB OTG FS smart DMA 1 MB flash memory 256 KB SRAM 100 MHz 125 DMIPS 64-LQFP LQFP package family surface-mount package industrial control USB data acquisition digital signal processing
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기