STMicroelectronics

STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics

MPN: STM32L053R8T3 ✓ פעיל
1.8 V to 3.6 V Vdss 64-pin LQFP, 10 mm x 10 mm Package 32 MHz Speed 64 KB Memory
כמות הזמנה מינימלית: 1 |

STM32L053R8T3 סקירה

The STMicroelectronics STM32L053R8T3 is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller with a 32 MHz CPU, 64 KB of Flash memory, 8 KB of SRAM, and USB 2.0 connectivity in a 64-pin LQFP package. It is designed for compact, battery-powered embedded products that require a balance of low active energy, efficient sleep-mode operation, and a broad set of serial peripherals. The STM32L053R8T3 operates from a 1.8 V to 3.6 V supply and supports an expanded 1.65 V to 3.6 V range when the brown-out detector is disabled.

An ultra-low-power microcontroller is a semiconductor that spends most of its operating time in low-energy states while retaining the processing and peripheral resources needed to respond to sensor readings, user inputs, and communications. The STM32L053 family combines an ARM Cortex-M0+ processor, embedded Flash and SRAM, analog and digital interfaces, and energy-saving modes in one integrated device. This makes it suitable for connected sensors, compact industrial controls, medical accessories, and USB-powered equipment where board area and standby energy are important constraints.

The STM32L053R8T3 provides 64 KB of Flash for firmware and 8 KB of SRAM for working memory. Its USB 2.0 interface includes crystal-less operation, reducing the need for a dedicated USB clock crystal in suitable designs. The device supports a -40 °C to +125 °C temperature range, making it usable across consumer, industrial, and extended-temperature environments. Its 32 MHz ARM Cortex-M0+ core provides responsive control performance while supporting the low-power architecture of the STM32L0 family.

Low-power operation is central to the device architecture. The manufacturer describes a comprehensive set of power-saving modes for applications that alternate between active measurement or control and long idle periods. Because the actual energy consumption depends on the selected mode, clock configuration, peripheral activity, and regulator settings, designers should compare the STM32L053R8T3 datasheet current tables against the intended duty cycle rather than relying on a single headline figure. USB operation and analog measurements naturally add activity compared with a design that remains in a deep sleep state.

Typical applications include low-power USB sensor nodes, compact data loggers, industrial condition-monitoring terminals, battery-operated measurement instruments, and USB-to-serial or USB-to-wireless bridge products. The 64-pin LQFP provides more I/O than smaller package variants while retaining a conventional surface-mount footprint. The integrated USB controller is particularly useful when a product must enumerate as a standard USB peripheral without adding a separate USB interface controller.

Designers should pay particular attention to clock-tree configuration, USB clocking, decoupling, and low-power wake-up sources. Follow the pin-description and alternate-function tables in the manufacturer datasheet when assigning the 64 LQFP pins. Keep the USB data pair routed as a controlled impedance differential pair, provide the required input and output capacitance close to the device, and confirm oscillator requirements for each supported clock source before finalizing the PCB.

This product page combines the verified manufacturer specifications, package information, USB connectivity, power-supply range, temperature capability, and practical design considerations with a clear explanation of drop-in alternatives. It is intended to help engineers select the correct memory configuration, package, operating range, and low-power architecture without relying on abbreviated catalog summaries alone.

חלופות תחליף ישיר עבור STM32L053R8T3 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם STM32L053R8T3 (אותו גורם צורה וטביעת רגל) — שונים ב Operating Temperature Range.

STMicroelectronics
Operating Temperature Range: -40 C to +125 C
השווה עם STM32L053R8T3 →

STM32L053R8T6

✅ Drop-In
STMicroelectronics
📦 64-LQFP (10x10 mm)
ARM Cortex-M0+ · 32-bit · 32 MHz · 64 KB (64K x 8) · 8 KB · 1.8 V to 3.6 V (BOR enabled; down to 1.65 V in power-down without BOR) · -40 C to +125 C · 64-LQFP (10x10 mm)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

STM32L053R8T3 דירוגים מרביים ומאפיינים חשמליים

Product Type Ultra-low-power 32-bit microcontroller
Processor Core ARM Cortex-M0+
Maximum CPU Frequency 32 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
SRAM 8 KB
Operating Supply Voltage with BOR 1.8 V to 3.6 V
Operating Supply Voltage without BOR 1.65 V to 3.6 V
Power-Down Supply Voltage Down to 1.65 V
טווח טמפרטורת פעולה -40 °C to +125 °C
USB Interface USB 2.0 crystal-less
Architecture 32-bit RISC
מארז 64-pin LQFP, 10 mm x 10 mm
סוג הרכבה Surface mount
Supply Configuration 2.5 V / 3.3 V
Packaging Form Tray
Power-Saving Modes Comprehensive low-power mode set
Brown-Out Detector Optional, depending on supply configuration

מדריך תצורת פינים של STM32L053R8T3 64-pin lqfp, 10 mm x 10 mm

תצורת פינים עבור STM32L053R8T3 (מארזת 64-pin lqfp, 10 mm x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-pin lqfp, 10 mm x 10 mm עבור STM32L053R8T3

אין נתוני פריסת פינים מפורטים עבור STM32L053R8T3.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

STM32L053R8T3 מתאים עבור 6 יישוםs: Low-Power USB Sensor Node, USB-to-Serial Bridge, Battery-Powered Data Logger, Industrial Condition Monitor, Medical Accessory Controller, USB-Powered Configuration Tool.

🧩

Low-Power USB Sensor Node

The STM32L053R8T3 fits a USB-connected sensor node because its 32 MHz ARM Cortex-M0+ core can acquire and process data while its STM32L0 low-power modes support duty-cycled operation. The 64 KB of Flash provides room for the application firmware, sensor drivers, and USB stack, while 8 KB of SRAM supports short measurement and buffering tasks. Its crystal-less USB 2.0 interface can simplify the clock arrangement in suitable designs. Designers should match the regulator output to the 1.8 V to 3.6 V range and quantify active versus sleep energy against the sensor duty cycle.

🔧

USB-to-Serial Bridge

The STM32L053R8T3 is suitable for a USB-to-serial bridge where a compact embedded controller must translate between USB and a UART or other peripheral interface. Its 32 MHz Cortex-M0+ core provides sufficient performance for protocol handling, while 64 KB of Flash accommodates firmware and USB descriptors and 8 KB of SRAM supports buffering. Crystal-less USB operation may reduce external clock requirements, although the exact USB clocking topology must follow the datasheet. The device also suits production bridges needing controlled firmware behavior and low idle power.

📱

Battery-Powered Data Logger

The STM32L053R8T3 can serve as the control and storage element in a battery-powered data logger that wakes periodically, records sensor information, and returns to a low-power state. Its 64 KB of Flash stores firmware and modest local data, while the 8 KB SRAM handles working buffers. The 1.8 V to 3.6 V operating range accommodates common low-voltage battery-derived rails after suitable regulation. Because flash endurance and energy per logging cycle determine useful battery life, the design should use wear-aware buffering and avoid unnecessary writes.

🏭

Industrial Condition Monitor

The STM32L053R8T3 is appropriate for an industrial condition-monitoring terminal that samples sensor inputs, evaluates thresholds, and records alarms over a serial or USB link. Its -40 °C to +125 °C rated operating range supports extended-temperature deployments, while the 64-pin LQFP provides access to multiple communication and control signals. The Cortex-M0+ core operates up to 32 MHz for responsive acquisition and filtering. Designers should verify analog front-end limits, input-tolerance rules, watchdog behavior, and thermal performance against the enclosure temperature.

💊

Medical Accessory Controller

The STM32L053R8T3 can control a compact medical accessory that receives commands, manages a low-power sensor, and provides USB connectivity. The 32 MHz Cortex-M0+ processor and 8 KB of SRAM are useful for lightweight control tasks, while the 64 KB of Flash accommodates communication firmware and configuration data. Its low-power architecture is beneficial when the accessory is intermittently active. However, medical use requires a separate assessment of electrical safety, software validation, risk management, and applicable regulatory requirements; the MCU temperature rating alone does not establish medical certification.

🖥️

USB-Powered Configuration Tool

The STM32L053R8T3 is useful in a USB-powered configuration or programming tool that exposes a serial interface to a host PC. The integrated crystal-less USB 2.0 controller supports direct enumeration, and the Cortex-M0+ core can handle command parsing and device configuration. Its 64 KB of Flash and 8 KB of SRAM are sufficient for many compact utility applications. Board implementation should reserve the USB differential pair for controlled-impedance routing, place required capacitance near the appropriate pins, and verify host compatibility and suspend behavior during prototype testing.

What are the key specifications of STM32L053R8T3 that engineers should know?
The STM32L053R8T3 combines a 32 MHz ARM Cortex-M0+ core, 64 KB of Flash, 8 KB of SRAM, and a crystal-less USB 2.0 interface in a 64-pin LQFP package. According to the STMicroelectronics STM32L053R8 datasheet, the device operates from 1.8 V to 3.6 V with the brown-out detector and can operate down to 1.65 V without it. It also supports a -40 °C to +125 °C temperature range, making it suitable for low-power embedded, USB-connected, and extended-temperature products.
Where can I download the STM32L053R8T3 PDF datasheet and pinout?
The official STM32L053R8T3 PDF datasheet is available from STMicroelectronics at the product datasheet URL on this page. It contains the complete pin-description table, alternate-function assignments, electrical characteristics, memory map, USB clocking requirements, and package drawings. Engineers should use the pin-description section when assigning the 64 LQFP pins and the USB hardware guidance when laying out the differential data pair and its required capacitance.
What is the STM32L053R8T3 pdf datasheet summary?
The STM32L053R8T3 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ architecture. Its principal resources are a 32 MHz CPU, 64 KB of Flash, 8 KB of SRAM, USB 2.0 connectivity, and a 64-pin LQFP package. The manufacturer datasheet specifies a 1.8 V to 3.6 V operating range with BOR and 1.65 V to 3.6 V without BOR, plus operation from -40 °C to +125 °C.
Where can I buy STM32L053R8T3 online?
The STM32L053R8T3 can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit pricing, stock confirmation, minimum order quantity, and delivery scheduling. The verified catalog record identifies the exact 64-pin LQFP device with 64 KB of Flash and a 32 MHz Cortex-M0+ core, allowing the request to be tied to the correct ordering code.
What is the lead time for STM32L053R8T3?
The current lead time for STM32L053R8T3 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package availability, production scheduling, and shipment destination. The exact ordering code STM32L053R8T3 denotes the 64-pin LQFP configuration in tray packaging, so including the complete MPN in the request helps prevent a mismatch with tape-and-reel or other package variants.
Is STM32L053R8T3 in stock?
Current stock for STM32L053R8T3 is best confirmed through the Request a Quote form on this page. A catalog listing indicates that this exact MPN is associated with in-stock inventory, but quantities and availability can change with order size and fulfillment timing. Use the full ordering code STM32L053R8T3 when requesting supply so that the 64-pin LQFP, tray-packaged configuration is matched.
What is the price of STM32L053R8T3?
Current pricing for STM32L053R8T3 is available through the Request a Quote form on this page. The form supports current quotations for the exact 64-pin LQFP ordering code and avoids presenting a stale catalog figure as a firm commercial offer. Buyers should specify the required quantity and destination so the quotation reflects practical production and logistics conditions.
How does STM32L053R8T3 compare with STM32L053R8T6?
STM32L053R8T3 and STM32L053R8T6 belong to the STM32L053R8 family and share the 64-pin LQFP configuration, 64 KB of Flash, 8 KB of SRAM, 32 MHz ARM Cortex-M0+ core, and USB connectivity. Their ordering codes differ, so temperature grade, packaging interpretation, and ordering conditions must be checked against the manufacturer datasheet before substitution. Use the STM32L053R8T6 as a hardware drop-in candidate only after confirming every operating limit and assembly requirement.
Can STM32L053R8T6 replace STM32L053R8T3?
STM32L053R8T6 is the closest verified same-package alternative for STM32L053R8T3. Both use the 64-pin LQFP configuration and belong to the STM32L053R8 family, allowing the same land pattern and principal memory resources to be retained. Before replacing the component, confirm the exact temperature range, package shipment form, firmware assumptions, and all peripheral assignments against the manufacturer datasheet.
When should I choose STM32L053R8T3 over STM32L053R8T6?
Choose STM32L053R8T3 when its specified ordering code, temperature range, and tray packaging match the product configuration and qualification plan. Choose STM32L053R8T6 when its corresponding ordering limits better fit the deployment and production requirements while retaining the same 64-pin LQFP footprint and core memory configuration. Because the two codes occupy different positions in STMicroelectronics’ ordering scheme, procurement and engineering should review the datasheet ordering information rather than assuming electrical interchangeability.
Is STM32L053R8T3 suitable for a low-power USB sensor node?
The STM32L053R8T3 is suitable for a low-power USB sensor node that periodically measures or transmits data. Its Cortex-M0+ core runs at up to 32 MHz, while the STM32L0 low-power architecture supports duty-cycled operation. The crystal-less USB 2.0 interface can reduce external clock-component requirements in suitable designs, although actual standby current, active current, and wake-up time must be checked against the product’s operating profile.
What can replace STM32L053R8T3?
STM32L053R8T6 is the verified drop-in hardware candidate for STM32L053R8T3 because it uses the same 64-pin LQFP package and belongs to the same STM32L053R8 device family. No verified cross-brand pin-to-pin replacement was identified for this exact ordering code. A substitute from another manufacturer must therefore be treated as a new design requiring complete pin, clock, memory, peripheral, firmware, and qualification review rather than an automatic drop-in replacement.
What is the best cross-brand equivalent for STM32L053R8T3?
No cross-brand equivalent is established as a verified drop-in replacement for STM32L053R8T3. The exact requirements include a 64-pin LQFP footprint, ARM Cortex-M0+ architecture, 64 KB of Flash, 8 KB of SRAM, USB 2.0 crystal-less operation, and the correct voltage and temperature limits. Choosing another manufacturer would require a deliberate redesign and validation rather than a board-only substitution, so use STM32L053R8T6 for the closest documented same-package path.
What design constraints matter for the STM32L053R8T3 power supply?
The STM32L053R8T3 requires attention to both brown-out configuration and USB power-supply behavior. The manufacturer specifies 1.8 V to 3.6 V operation with BOR and 1.65 V to 3.6 V operation without the BOR option. Place the required decoupling capacitors close to the supply and ground pins, follow the datasheet USB power and clock requirements, and verify that the system voltage remains within the selected configuration’s limits during suspend, resume, and startup transitions.
Does STM32L053R8T3 support a crystal-less USB clock?
Yes, the STM32L053R8T3 family incorporates USB 2.0 crystal-less operation. This feature can simplify USB peripheral designs that would otherwise require a dedicated USB clock crystal. Crystal-less operation does not eliminate all clock planning: the system still needs a valid clock source and correct configuration for USB communication, so follow the manufacturer’s clock-tree, prescaler, accuracy, and startup guidance in the datasheet.
Is STM32L053R8T3 RoHS compliant and suitable for industrial products?
The STM32L053R8T3 is specified for operation from -40 °C to +125 °C, which supports extended-temperature industrial product designs. RoHS, REACH, AEC-Q100, and halogen-free status are not established by the catalog information available for this page and should not be assumed. Confirm the current compliance declarations and qualification reports for the exact ordering code before release, particularly when customer or regulatory requirements mandate documented material or automotive qualification.

נתוני עזר הנדסיים עבור STM32L053R8T3 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Select STM32L053R8T3 when the product requires the exact T3 ordering code, a 64 KB Flash Cortex-M0+ MCU, crystal-less USB 2.0 connectivity, and operation across the -40 °C to +125 °C range. Its 8 KB of SRAM and 1.8 V to 3.6 V supply operation are suitable for compact USB peripherals, data loggers, sensor nodes, and industrial monitoring modules. STM32L053R8T6 is the closest verified drop-in candidate because it retains the same 64-pin LQFP footprint and principal STM32L053R8 resources. Choose that ordering code only after confirming the suffix-specific temperature, packaging, and ordering requirements. No verified cross-brand drop-in alternative was found, so another manufacturer should be considered only when the board, clock design, firmware, peripherals, and qualification plan can be redesigned and revalidated.

השוואה עם חלופות

פרמטר מוצר זה STM32L053R8T6
Package 64-LQFP (10x10 mm) 64-LQFP (10x10 mm)
Brand STMicroelectronics STMicroelectronics
Processor Core ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory 64 KB 64 KB
SRAM 8 KB 8 KB
USB Interface USB 2.0 crystal-less USB 2.0 crystal-less
Supply Voltage with BOR 1.8 V to 3.6 V 1.8 V to 3.6 V
Supply Voltage without BOR 1.65 V to 3.6 V 1.65 V to 3.6 V
Ordering Code Difference STM32L053R8T3 T6 suffix; confirm temperature and packaging details

מבדילים עיקריים

  • Directly matches the requested 64-pin LQFP STM32L0 configuration (לעומתSTM32L053R8T6)
  • Combines USB connectivity with low-power architecture (לעומתSTM32L053R8T6)
  • Supports extended-temperature operation (לעומתSTM32L053R8T6)

הערות תכנון

Configure the supply and brown-out detector as a matched pair. The STM32L053R8T3 operates from 1.8 V to 3.6 V with BOR and 1.65 V to 3.6 V without the BOR option. Place the required input and output capacitors close to their designated supply and ground pins, use a regulator capable of supporting the selected USB operating state, and check startup, suspend, and resume behavior across the full USB bus-voltage range rather than testing only at a nominal 3.3 V input.

Implement the USB interface as a controlled-impedance differential pair with symmetrical routing and minimal stubs. Place the USB connector, protection components, and required bus capacitance in the order recommended by the STM32L053R8 datasheet, keeping sensitive USB clock and data paths away from noisy switching nodes. Crystal-less USB operation does not justify relaxing impedance, return-path, or decoupling requirements, and the complete clock-tree configuration must still be validated for all USB speed and bus states.

Do not infer every pin function or alternate mapping from a catalog diagram. Use the official STM32L053R8 pin-description table to assign all 64 LQFP pins, including power, ground, reset, boot, debug, and peripheral functions. A same-footprint ordering suffix does not by itself prove an unconditional drop-in substitution; verify the temperature grade, tape-and-reel or tray format, pin configuration, and peripheral behavior before changing STM32L053R8T3 to STM32L053R8T6.

The -40 °C to +125 °C specification defines the device’s rated operating range, not the final product enclosure temperature. Validate worst-case ambient temperature, regulator dissipation, PCB copper availability, and nearby heat sources at the intended switching frequency. In enclosed industrial equipment, include a margin between the hottest component estimate and the maximum junction rating rather than using the environmental specification as a substitute for a thermal analysis.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The device is specified for a -40 °C to +125 °C operating range. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not confirmed by the available manufacturer or distributor records and must be checked for the exact ordering code.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

stm32l053r8t3 pdf datasheet view stm32l053r8t3 pdf datasheet online stm32l053r8t3 pdf datasheet pinout stm32l053r8t3 pdf datasheet summary stm32l053r8t3 pdf datasheet download stm32l053r8t3 pdf datasheet features stm32l053r8t3 pdf datasheet revision stm32l053r8t3 pdf datasheet comparison STM32L053R8T3 datasheet STM32L053R8T3 pinout STM32L053R8T3 equivalent STM32L053R8T3 replacement STM32L053R8T3 vs STM32L053R8T6 STM32L053R8T3 low power USB sensor STM32L053R8T3 price

רכיבים ומונחים קשורים

STMicroelectronics STM32L053R8T3 STM32L053R8T6 STM32L053R8 STM32L0 ARM Cortex-M0+ 32-bit RISC microcontroller ultra-low-power microcontroller embedded microcontroller semiconductor USB 2.0 crystal-less USB 64 KB Flash 8 KB SRAM 64-pin LQFP LQFP package surface mount 1.8 V to 3.6 V operating supply brown-out detector low-power mode USB sensor node industrial condition monitoring battery-powered data logger embedded serial interface
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר