STM32L053R8T3 - 32MHz Cortex-M0+ MCU | STMicroelectronics
MPN: STM32L053R8T3 ✓ 啟用中STM32L053R8T3 概覽
An ultra-low-power microcontroller is a semiconductor that spends most of its operating time in low-energy states while retaining the processing and peripheral resources needed to respond to sensor readings, user inputs, and communications. The STM32L053 family combines an ARM Cortex-M0+ processor, embedded Flash and SRAM, analog and digital interfaces, and energy-saving modes in one integrated device. This makes it suitable for connected sensors, compact industrial controls, medical accessories, and USB-powered equipment where board area and standby energy are important constraints.
The STM32L053R8T3 provides 64 KB of Flash for firmware and 8 KB of SRAM for working memory. Its USB 2.0 interface includes crystal-less operation, reducing the need for a dedicated USB clock crystal in suitable designs. The device supports a -40 °C to +125 °C temperature range, making it usable across consumer, industrial, and extended-temperature environments. Its 32 MHz ARM Cortex-M0+ core provides responsive control performance while supporting the low-power architecture of the STM32L0 family.
Low-power operation is central to the device architecture. The manufacturer describes a comprehensive set of power-saving modes for applications that alternate between active measurement or control and long idle periods. Because the actual energy consumption depends on the selected mode, clock configuration, peripheral activity, and regulator settings, designers should compare the STM32L053R8T3 datasheet current tables against the intended duty cycle rather than relying on a single headline figure. USB operation and analog measurements naturally add activity compared with a design that remains in a deep sleep state.
Typical applications include low-power USB sensor nodes, compact data loggers, industrial condition-monitoring terminals, battery-operated measurement instruments, and USB-to-serial or USB-to-wireless bridge products. The 64-pin LQFP provides more I/O than smaller package variants while retaining a conventional surface-mount footprint. The integrated USB controller is particularly useful when a product must enumerate as a standard USB peripheral without adding a separate USB interface controller.
Designers should pay particular attention to clock-tree configuration, USB clocking, decoupling, and low-power wake-up sources. Follow the pin-description and alternate-function tables in the manufacturer datasheet when assigning the 64 LQFP pins. Keep the USB data pair routed as a controlled impedance differential pair, provide the required input and output capacitance close to the device, and confirm oscillator requirements for each supported clock source before finalizing the PCB.
This product page combines the verified manufacturer specifications, package information, USB connectivity, power-supply range, temperature capability, and practical design considerations with a clear explanation of drop-in alternatives. It is intended to help engineers select the correct memory configuration, package, operating range, and low-power architecture without relying on abbreviated catalog summaries alone.
直接替換替代品,適用於 STM32L053R8T3 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L053R8T3 (相同外形與佔位) — 差異在於 Operating Temperature Range.
STM32L053R8T6
✅ 直接替換聯絡詢價
查看資料表 →STM32L053R8T3 最大額定值與電氣特性
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 8 KB |
| Operating Supply Voltage with BOR | 1.8 V to 3.6 V |
| Operating Supply Voltage without BOR | 1.65 V to 3.6 V |
| Power-Down Supply Voltage | Down to 1.65 V |
| 工作溫度範圍 | -40 °C to +125 °C |
| USB Interface | USB 2.0 crystal-less |
| Architecture | 32-bit RISC |
| 封裝 | 64-pin LQFP, 10 mm x 10 mm |
| 安裝類型 | Surface mount |
| Supply Configuration | 2.5 V / 3.3 V |
| Packaging Form | Tray |
| Power-Saving Modes | Comprehensive low-power mode set |
| Brown-Out Detector | Optional, depending on supply configuration |
STM32L053R8T3 64-pin lqfp, 10 mm x 10 mm 腳位配置指南
STM32L053R8T3(64-pin lqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L053R8T3.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L053R8T3 適用於 6 應用s: Low-Power USB Sensor Node, USB-to-Serial Bridge, Battery-Powered Data Logger, Industrial Condition Monitor, Medical Accessory Controller, USB-Powered Configuration Tool.
Low-Power USB Sensor Node
The STM32L053R8T3 fits a USB-connected sensor node because its 32 MHz ARM Cortex-M0+ core can acquire and process data while its STM32L0 low-power modes support duty-cycled operation. The 64 KB of Flash provides room for the application firmware, sensor drivers, and USB stack, while 8 KB of SRAM supports short measurement and buffering tasks. Its crystal-less USB 2.0 interface can simplify the clock arrangement in suitable designs. Designers should match the regulator output to the 1.8 V to 3.6 V range and quantify active versus sleep energy against the sensor duty cycle.
推薦
USB-to-Serial Bridge
The STM32L053R8T3 is suitable for a USB-to-serial bridge where a compact embedded controller must translate between USB and a UART or other peripheral interface. Its 32 MHz Cortex-M0+ core provides sufficient performance for protocol handling, while 64 KB of Flash accommodates firmware and USB descriptors and 8 KB of SRAM supports buffering. Crystal-less USB operation may reduce external clock requirements, although the exact USB clocking topology must follow the datasheet. The device also suits production bridges needing controlled firmware behavior and low idle power.
推薦
Battery-Powered Data Logger
The STM32L053R8T3 can serve as the control and storage element in a battery-powered data logger that wakes periodically, records sensor information, and returns to a low-power state. Its 64 KB of Flash stores firmware and modest local data, while the 8 KB SRAM handles working buffers. The 1.8 V to 3.6 V operating range accommodates common low-voltage battery-derived rails after suitable regulation. Because flash endurance and energy per logging cycle determine useful battery life, the design should use wear-aware buffering and avoid unnecessary writes.
推薦
Industrial Condition Monitor
The STM32L053R8T3 is appropriate for an industrial condition-monitoring terminal that samples sensor inputs, evaluates thresholds, and records alarms over a serial or USB link. Its -40 °C to +125 °C rated operating range supports extended-temperature deployments, while the 64-pin LQFP provides access to multiple communication and control signals. The Cortex-M0+ core operates up to 32 MHz for responsive acquisition and filtering. Designers should verify analog front-end limits, input-tolerance rules, watchdog behavior, and thermal performance against the enclosure temperature.
推薦
Medical Accessory Controller
The STM32L053R8T3 can control a compact medical accessory that receives commands, manages a low-power sensor, and provides USB connectivity. The 32 MHz Cortex-M0+ processor and 8 KB of SRAM are useful for lightweight control tasks, while the 64 KB of Flash accommodates communication firmware and configuration data. Its low-power architecture is beneficial when the accessory is intermittently active. However, medical use requires a separate assessment of electrical safety, software validation, risk management, and applicable regulatory requirements; the MCU temperature rating alone does not establish medical certification.
推薦
USB-Powered Configuration Tool
The STM32L053R8T3 is useful in a USB-powered configuration or programming tool that exposes a serial interface to a host PC. The integrated crystal-less USB 2.0 controller supports direct enumeration, and the Cortex-M0+ core can handle command parsing and device configuration. Its 64 KB of Flash and 8 KB of SRAM are sufficient for many compact utility applications. Board implementation should reserve the USB differential pair for controlled-impedance routing, place required capacitance near the appropriate pins, and verify host compatibility and suspend behavior during prototype testing.
推薦
工程參考資料,適用於 STM32L053R8T3 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32L053R8T6 |
|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) |
| Brand | STMicroelectronics | STMicroelectronics |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB |
| SRAM | 8 KB | 8 KB |
| USB Interface | USB 2.0 crystal-less | USB 2.0 crystal-less |
| Supply Voltage with BOR | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Supply Voltage without BOR | 1.65 V to 3.6 V | 1.65 V to 3.6 V |
| Ordering Code Difference | STM32L053R8T3 | T6 suffix; confirm temperature and packaging details |
主要差異化特點
- Directly matches the requested 64-pin LQFP STM32L0 configuration (對比STM32L053R8T6)
- Combines USB connectivity with low-power architecture (對比STM32L053R8T6)
- Supports extended-temperature operation (對比STM32L053R8T6)
設計說明
Configure the supply and brown-out detector as a matched pair. The STM32L053R8T3 operates from 1.8 V to 3.6 V with BOR and 1.65 V to 3.6 V without the BOR option. Place the required input and output capacitors close to their designated supply and ground pins, use a regulator capable of supporting the selected USB operating state, and check startup, suspend, and resume behavior across the full USB bus-voltage range rather than testing only at a nominal 3.3 V input.
Implement the USB interface as a controlled-impedance differential pair with symmetrical routing and minimal stubs. Place the USB connector, protection components, and required bus capacitance in the order recommended by the STM32L053R8 datasheet, keeping sensitive USB clock and data paths away from noisy switching nodes. Crystal-less USB operation does not justify relaxing impedance, return-path, or decoupling requirements, and the complete clock-tree configuration must still be validated for all USB speed and bus states.
Do not infer every pin function or alternate mapping from a catalog diagram. Use the official STM32L053R8 pin-description table to assign all 64 LQFP pins, including power, ground, reset, boot, debug, and peripheral functions. A same-footprint ordering suffix does not by itself prove an unconditional drop-in substitution; verify the temperature grade, tape-and-reel or tray format, pin configuration, and peripheral behavior before changing STM32L053R8T3 to STM32L053R8T6.
The -40 °C to +125 °C specification defines the device’s rated operating range, not the final product enclosure temperature. Validate worst-case ambient temperature, regulator dissipation, PCB copper availability, and nearby heat sources at the intended switching frequency. In enclosed industrial equipment, include a margin between the hottest component estimate and the maximum junction rating rather than using the environmental specification as a substitute for a thermal analysis.
合規資訊
The device is specified for a -40 °C to +125 °C operating range. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not confirmed by the available manufacturer or distributor records and must be checked for the exact ordering code.