STMicroelectronics

STM32L471VGT6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

MPN: STM32L471VGT6 ✓ פעיל
2.5 V or 3.3 V Vdss 100-pin LQFP Package 80 MHz Speed 1 MB (1M x 8) Memory
כמות הזמנה מינימלית: 1 |

STM32L471VGT6 סקירה

The STMicroelectronics STM32L471VGT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an operating frequency up to 80 MHz, 1 MB of Flash memory, a single-precision FPU, and a 100-pin LQFP package measuring 14 x 14 mm. It is designed for embedded systems requiring efficient Cortex-M4 processing, extensive mixed-signal connectivity, and low-power operation in industrial, consumer, medical, and connected-equipment applications.

An ultra-low-power microcontroller is a semiconductor device optimized to perform control, measurement, communications, and data-processing tasks while minimizing energy consumption. The STM32L471 belongs to STMicroelectronics’ STM32L4 family, combining the Arm Cortex-M4 processor hierarchy with energy-efficient embedded control, analog peripherals, digital interfaces, and memory in one integrated device. Its architecture is suitable for designs that must balance processing capability, peripheral integration, board area, and power efficiency.

The STM32L471VGT6 combines an 80 MHz Arm Cortex-M4 core with 1 MB of Flash and a single-precision floating-point unit. The Cortex-M4 processor supports the standard Arm single-precision data-processing instructions and a complete set of DSP instructions. This combination gives embedded developers a compact platform for control loops, signal processing, protocol handling, and floating-point calculations without requiring a separate DSP or math coprocessor.

The device also includes digital and analog resources suited to mixed-signal embedded products. Its broad peripheral integration can reduce the number of discrete components on a compact PCB. The manufacturer’s STM32L471xx documentation identifies the family as an ultra-low-power Cortex-M4 MCU platform and confirms the 80 MHz maximum operating frequency and single-precision FPU architecture used by this ordering code.

Typical applications include industrial sensor controllers, low-power data loggers, medical monitoring equipment, building controls, communication modules, compact motor-control systems, and battery-powered IoT devices. The 100-pin LQFP package provides ample external connectivity for mixed-signal boards, while the 1 MB Flash capacity provides room for larger firmware images, boot routines, diagnostics, and application logic.

Designers should preserve the voltage and decoupling requirements specified in the manufacturer datasheet, place decoupling capacitors close to the supply pins, and maintain clear separation between sensitive analog inputs, high-speed digital signals, and switching-power circuitry. Firmware compatibility between related STM32L4 devices should be verified rather than assumed, particularly when changing memory configuration, peripheral availability, or boot behavior.

This page organizes the STM32L471VGT6’s core identifiers, package information, sourcing path, and engineering guidance with practical context for PCB integration. It also distinguishes exact device attributes from data that must be confirmed in the manufacturer’s pin table and electrical-characteristics documentation before a new board is released to production.

חלופות תחליף ישיר עבור STM32L471VGT6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם STM32L471VGT6 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Flash Memory, ADC, CAN, DAC.

STMicroelectronics
Package: LQFP-144 (20 x 20 mm)
Flash Memory: 1 MB
ADC: 3 x 12-bit, 5 Msps
השווה עם STM32L471VGT6 →
STMicroelectronics
Package: 100-LQFP (14x14 mm)
ADC: 3x 12-bit, 5 Msps
CAN: 1x CAN 2.0B
השווה עם STM32L471VGT6 →

STM32L475VGT6

✅ Drop-In
STMicroelectronics
📦 LQFP-100 (14 x 14 mm)
ARM Cortex-M4 with FPU (32-bit) · 80 MHz · 100 DMIPS · 1 MB (1M x 8) · 128 KB · 1.71 V to 3.6 V · 100-LQFP (14x14 mm) · -40 C to +85 C

✗ אזל מהמלאי

$5.2 / יחידה

הצג גיליון נתונים ←

STM32L471VGT6 דירוגים מרביים ומאפיינים חשמליים

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M4 32-bit RISC
Maximum CPU Frequency 80 MHz
Flash Memory 1 MB (1M x 8)
Floating-Point Unit Single precision
DSP Instruction Support Complete set of Cortex-M4 DSP instructions
Program Memory Type Flash
מתח אספקה 2.5 V or 3.3 V
מארז 100-pin LQFP
Package Dimensions 14 x 14 mm
סוג הרכבה Surface mount
Shipping Package Tray
רוחב אפיק נתונים 32 bit
DFSDM Interface Supported

מדריך תצורת פינים של STM32L471VGT6 tray

תצורת פינים עבור STM32L471VGT6 (מארזת tray). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת tray עבור STM32L471VGT6

אין נתוני פריסת פינים מפורטים עבור STM32L471VGT6.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

STM32L471VGT6 מתאים עבור 6 יישוםs: Industrial Sensor Controller, Battery-Powered IoT Sensor Node, Medical Monitoring Device, Compact Motor-Control System, Building and HVAC Controller, Low-Power Data Logger.

🏭

Industrial Sensor Controller

The STM32L471VGT6 fits industrial sensor controllers that require an 80 MHz Arm Cortex-M4 processor, 1 MB of Flash, and a generous 100-pin package for mixed-signal connectivity. The single-precision FPU and DSP instruction support can accelerate filtering, calibration, and transform-related calculations, while the LQFP footprint exposes more I/O than a compact 32-pin design. Place analog inputs according to the manufacturer pin table and keep the MCU’s supply decoupling close to the device. Validate the controller across supply variation, sensor-signal ranges, and environmental conditions before deployment.

🧩

Battery-Powered IoT Sensor Node

The STM32L471VGT6 is appropriate for battery-powered IoT sensor nodes because it combines an 80 MHz Cortex-M4 core with the low-power positioning of the STM32L471xx family. Its 1 MB Flash provides room for application firmware, local data processing, protocol stacks, and diagnostics without forcing an immediate move to a larger memory device. Energy optimization should be based on the duty cycle and measured current in each operating mode. Use the low-power modes, wake-up sources, and peripheral clock configuration described in the manufacturer documentation rather than leaving the processor continuously active.

💊

Medical Monitoring Device

The STM32L471VGT6 can serve as the central controller in a medical monitoring system where signal processing, local data handling, and low-power operation are important. The Cortex-M4 DSP instructions and single-precision FPU support useful control and numerical tasks, while 1 MB of Flash accommodates application code and test algorithms. Its 100-pin package provides access to digital interfaces and analog-capable I/O, but each pin assignment must be checked against the exact STM32L471VGT6 pin table. Medical designs should also follow applicable risk-management, electrical-safety, and validation requirements for the finished product.

🔧

Compact Motor-Control System

The STM32L471VGT6 is suitable for compact motor-control and actuator systems that require more I/O and timer connectivity than a small microcontroller package offers. Its 80 MHz Cortex-M4 core can execute motor algorithms, while the DSP instructions and single-precision FPU support calculations commonly used in control loops. The 100-pin LQFP also provides a practical route to external gate drivers, position sensors, current sensing, and communications. Timing, break inputs, emergency-stop behavior, and fault handling must be designed to the specific peripheral capabilities listed in the manufacturer documentation.

🏠

Building and HVAC Controller

The STM32L471VGT6 fits building-control and HVAC equipment where one controller must combine sensor acquisition, actuator control, communications, and local logic. Its 1 MB Flash supports a substantial embedded application, and the 100-pin LQFP allows direct connection to sensors, relays, communication transceivers, and status indicators. Low-power characteristics can benefit systems that spend substantial time idle, but the energy budget must include sensor and actuator loads that dominate many HVAC nodes. Use the manufacturer’s pin multiplexing and electrical requirements to avoid conflicts between analog inputs, timers, and serial interfaces.

📟

Low-Power Data Logger

The STM32L471VGT6 is a practical fit for low-power data loggers that sample sensors, store information locally, and transmit it periodically. The Cortex-M4 processor can handle filtering and protocol work at up to 80 MHz, while 1 MB of Flash provides room for buffering logic, a bootloader, and diagnostic routines. The STM32L471xx family’s low-power orientation supports duty-cycled operation, provided the design explicitly controls clocks, peripherals, and wake-up behavior. For removable media or external storage, account for the data bus, write timing, and level compatibility in the system architecture.

What is the operating voltage of STM32L471VGT6?
The STM32L471VGT6 is identified for 2.5 V or 3.3 V operation in its product listing. According to the manufacturer datasheet DM00149404, the complete electrical limits, internal regulator behavior, and operating conditions must be checked against the selected power architecture. Use 3.3 V for a conventional 3.3 V system and confirm the analog-supply requirements before assigning pins or designing the power tree.
What is the maximum clock frequency of STM32L471VGT6?
The STM32L471VGT6 operates at up to 80 MHz with its Arm Cortex-M4 core. The manufacturer datasheet DM00149404 confirms the 80 MHz maximum frequency and describes a high-performance 32-bit RISC architecture. This operating point supports responsive control tasks, protocol handling, DSP instructions, and single-precision floating-point calculations in a low-power embedded design.
How much Flash memory does STM32L471VGT6 have?
The STM32L471VGT6 contains 1 MB, or 1M x 8 bits, of Flash program memory. This capacity allows a larger firmware image than the smaller STM32L471 memory configurations while retaining the 100-pin LQFP package. The manufacturer datasheet DM00149404 remains the controlling reference for boot requirements, memory organization, write timing, and device-specific programming procedures.
What package does STM32L471VGT6 use?
The STM32L471VGT6 uses a surface-mount 100-pin LQFP package measuring 14 x 14 mm. The product listing identifies the same 100-LQFP configuration as the STM32L471VG family device. Because an LQFP has gull-wing leads on all four sides, use the manufacturer pin table and land-pattern guidance to assign every signal and preserve exposed-pad requirements where applicable.
Where can I download the STM32L471VGT6 datasheet PDF?
The official STM32L471VGT6 datasheet PDF is available through the STMicroelectronics document link listed on this page. The document is identified as DM00149404 and covers the STM32L471xx ultra-low-power Arm Cortex-M4 MCU family. Use it to confirm pin multiplexing, electrical limits, memory characteristics, clock topology, peripheral behavior, and package dimensions before finalizing the hardware.
Where can I find the STM32L471VGT6 pinout?
The STM32L471VGT6 pinout is documented in the pin-description section and package drawings of the manufacturer datasheet DM00149404. Its device code identifies a 100-pin LQFP package. Assign PCB nets only after checking the alternate-function table because many I/O pins can be reassigned among GPIO, serial, timer, analog, and debug functions according to the device configuration.
Is STM32L475VGT6 a drop-in replacement for STM32L471VGT6?
The STM32L475VGT6 uses the same 100-LQFP format and appears as a closely related same-family alternative, but it is not a universally identical replacement for every STM32L471VGT6 design. Related STM32L4 devices can differ in available peripherals, memory mapping, clock details, and firmware requirements. Verify the complete pin table, peripheral set, startup configuration, and firmware dependencies before production substitution.
What can replace STM32L471VGT6 on an existing PCB?
The closest identified same-package replacement candidate is the STM32L475VGT6, which shares the 100-pin LQFP format and belongs to the related STM32L4 family. It should be treated as a conditional replacement rather than an automatic substitute. Check pin multiplexing, power behavior, peripheral availability, boot configuration, memory organization, and firmware support against the STM32L471VGT6 datasheet before approving a drop-in conversion.
STM32L471VGT6 vs STM32L475VGT6 — which is better for a low-power design?
Choose the STM32L471VGT6 when the design specifically targets that device’s feature set and validated firmware configuration; choose the STM32L475VGT6 when its additional family capabilities are required and the pin and firmware differences have been reviewed. Both use an 80 MHz Cortex-M4-class architecture and a 100-pin LQFP format, but the final choice depends on the peripherals and software functions used by the product.
When should I choose STM32L471VGT6 instead of a lower-pin-count STM32L4 MCU?
Choose the STM32L471VGT6 when the board needs the exposure of a 100-pin LQFP, 1 MB of Flash, and the STM32L471 peripheral configuration. A smaller package can reduce board area when only a few external connections are required, but it may remove analog, communication, timer, or general-purpose I/O resources. Compare the actual pin list and required peripheral mix rather than selecting by core frequency alone.
Is STM32L471VGT6 suitable for IoT and battery-powered products?
The STM32L471VGT6 is suitable for IoT and battery-powered products when its low-power modes, active current, and wake-up behavior match the duty cycle. The manufacturer describes the STM32L471xx family as ultra-low-power Cortex-M4 devices. Determine average energy per measurement or control cycle from the application duty cycle, rather than relying only on the 80 MHz processing rate.
How much current does STM32L471VGT6 consume?
The exact operating, sleep, stop, and standby currents for the STM32L471VGT6 are specified in the manufacturer datasheet DM00149404 under the electrical characteristics. Current depends on the selected clock, regulator state, peripheral activity, flash execution mode, and I/O loading. For a battery design, calculate each mission-mode current and include the time spent in every operating state.
Can I use the same firmware for STM32L471VGT6 and STM32L475VGT6?
Firmware built for the STM32L471VGT6 may run on a related STM32L475VGT6 after device identification, but direct reuse must be validated. Compiler output, startup files, linker scripts, peripheral libraries, and application code can depend on the exact device ID and available features. Rebuild against the intended target when possible and test reset behavior, peripheral initialization, interrupts, low-power transitions, and boundary conditions.
Where to buy STM32L471VGT6 online?
Use the “Request a Quote” form on this page to request STM32L471VGT6 availability, quantity breaks, and current lead time. The form is the appropriate sourcing channel for this product and avoids publishing a static price that may expire. Include the required quantity, tray packaging preference, target date, and any traceability or inspection requirements in the request.
What is the price and lead time of STM32L471VGT6?
Submit an STM32L471VGT6 request through the “Request a Quote” form on this page for the current price, stock position, minimum order quantity, and lead time. Quote timing and component allocation can change, so the form should be completed with the required quantity and delivery schedule. The ordering code shown for this product is the 100-pin LQFP version supplied in a tray.

נתוני עזר הנדסיים עבור STM32L471VGT6 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the STM32L471VGT6 when the design is specified around the STM32L471VG family and requires an 80 MHz Arm Cortex-M4 MCU with 1 MB of Flash, a single-precision FPU, and a 100-pin LQFP package. It is especially suitable for mixed-signal industrial, medical, building-control, data-logging, and connected embedded products that benefit from substantial I/O and low-power-oriented architecture. The STM32L475VGT6 is a mechanically similar related-family candidate, but it should be selected only after confirming that its additional or different peripheral capabilities are needed and that its device-specific firmware can be validated. A smaller STM32L4 MCU may be preferable when fewer pins, a smaller footprint, and lower board complexity are sufficient. Conversely, retain the STM32L471VGT6 when validated software, 1 MB of Flash, or the exact LQFP pin allocation is essential to schedule, qualification, or production continuity.

השוואה עם חלופות

פרמטר מוצר זה STM32L475VGT6
Package 100-pin LQFP (14 x 14 mm) 100-pin LQFP
Brand STMicroelectronics STMicroelectronics
Maximum CPU Frequency 80 MHz 80 MHz
Flash Memory 1 MB 1 MB
Program Memory Type Flash Flash
Firmware Compatibility Targeted for STM32L471VG Related STM32L4 device; rebuild and validate required

מבדילים עיקריים

  • Large 1 MB Flash configuration in a 100-pin low-power MCU (לעומתSTM32L475VGT6)
  • 80 MHz Cortex-M4 processing with single-precision FPU (לעומתSTM32L475VGT6)
  • 100-pin mixed-signal integration (לעומתSTM32L475VGT6)

הערות תכנון

Assign every net from the STM32L471VGT6 pin-description table rather than from the broader STM32L471 family outline. The 100-pin LQFP provides many multiplexed functions, and an incorrect alternate-function choice can alter timer channels, serial interfaces, debug access, or analog assignments. Keep decoupling capacitors close to the relevant supply pins and route sensitive analog inputs away from switching nodes. Confirm the manufacturer land pattern and paste mask because LQFP lead geometry, pin pitch, and courtyard requirements must match the selected footprint.

Build the power tree around the manufacturer’s recommended 2.5 V or 3.3 V operating arrangement and verify startup, reset, and brownout behavior for the exact board configuration. Do not infer analog-supply or internal-regulator requirements from the headline supply listing; confirm them in the electrical-characteristics tables. Place bulk and high-frequency decoupling at the MCU supply pins and keep return paths short. The MCU’s operating current is only one part of the system budget, so include sensors, transceivers, LEDs, regulators, and any externally powered peripherals in the total thermal and battery analysis.

Do not treat a shared package as proof that firmware, peripherals, and electrical behavior are identical. Before substituting the STM32L475VGT6, compare the complete pin table, device identifier, clock tree, power behavior, memory organization, peripheral availability, and startup code. Rebuild for the final device where possible, then test reset, bootloader, interrupt priorities, analog channels, timers, communication peripherals, and low-power wake-up paths. This prevents a mechanically compatible replacement from creating a firmware-dependent field failure.

Use the 100-pin LQFP footprint with attention to fanout between fine-pitch leads and escape routing. Place the oscillator and supporting components, reset circuitry, programming/debug access, and decoupling according to the manufacturer reference layout. Separate analog inputs from digital clocks and switching-power traces, and provide adequate return copper under signal paths where the board stack-up permits. Review all pins used for SWD debugging so programming and fault analysis remain accessible after assembly.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance attributes were not explicitly stated in the manufacturer or distributor information. Verify the current declarations for the exact ordering code and package.

חיפושים קשורים

STM32L471VGT6 datasheet STM32L471VGT6 datasheet pdf STM32L471VGT6 pinout STM32L471VGT6 footprint STM32L471VGT6 equivalent STM32L471VGT6 replacement STM32L471VGT6 cross reference STM32L471VGT6 vs STM32L475VGT6 STM32L471VGT6 application circuit STM32L471VGT6 price STM32L471VGT6 stock STMicroelectronics STM32L471VGT6 STM32L471VGT6 80MHz 1MB flash STM32L471VGT6 LQFP-100 how to replace STM32L471VGT6

רכיבים ומונחים קשורים

STMicroelectronics STM32L471VGT6 STM32L471VG STM32L475VGT6 Arm Arm Cortex-M4 32-bit RISC STM32L4 ultra-low-power microcontroller microcontroller embedded processor semiconductor single-precision FPU DSP instructions 1 MB Flash 80 MHz 100-pin LQFP LQFP package family surface mount SMD 2.5 V 3.3 V DFSDM mixed-signal control IoT sensor node
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר