STMicroelectronics

STM32L4R5ZGT6 - 120MHz Cortex-M4 1MB Flash MCU | ST

MPN: STM32L4R5ZGT6 ✓ פעיל
1.8 V to 3.3 V Vdss 144-LQFP (20 mm × 20 mm) Package 120 MHz Speed 1 MB (1M × 8) Memory
כמות הזמנה מינימלית: 1 |

STM32L4R5ZGT6 סקירה

STMicroelectronics STM32L4R5ZGT6 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M4 processor, operating at up to 120 MHz with 1 MB of flash memory in a 144-pin LQFP 20 mm × 20 mm package. The device combines a 120 MHz Cortex-M4 core, 1 MB flash, 640 KB SRAM, and an extensive set of embedded peripherals for connected industrial, medical, consumer, and IoT equipment.

An ultra-low-power microcontroller is an embedded processing device optimized to balance compute performance with standby, stop, and low-power-run efficiency. The STM32L4R5ZGT6 belongs to the STM32L4+ Series, combining a high-performance Arm Cortex-M4 RISC core with energy-conscious peripherals. This hierarchy places it above general-purpose Cortex-M microcontrollers in applications that require both real-time processing and constrained power budgets.

Principal features include a 32-bit Arm Cortex-M4 core with floating-point capability, operation up to 120 MHz, 1 MB of flash, 640 KB of SRAM, and a 144-LQFP package. The STM32L4+ family also supports advanced connectivity and security-oriented use cases, including USB OTG, DFSD capability, and efficient management of sensor, display, storage, and communications peripherals. Its large pin count provides broad external I/O access for mixed-signal embedded platforms.

The STM32L4R5 architecture is suited to control loops that must execute predictably while retaining multiple low-power operating modes. Its Cortex-M4 instruction set supports digital signal processing and control-oriented routines, while the integrated memory reduces external bus pressure for common workloads. The 1 MB flash capacity also allows substantial firmware, boot code, configuration data, and application logic to reside on-chip, supporting standalone designs with limited external storage requirements.

Typical applications include industrial monitoring and control equipment, connected energy meters, medical instrumentation, USB-connected data loggers, low-power sensor hubs, and compact human-interface systems. In an energy meter, the device can combine measurement, calendar, communications, and local display-control tasks while using low-power modes between update intervals. In medical equipment, deterministic processing and a broad peripheral complement help consolidate functions while reducing board area.

PCB design should begin with the complete manufacturer pin description and package drawing because the 144-pin LQFP footprint provides many power, ground, analog, debug, communication, and general-purpose I/O assignments. Keep sensitive analog inputs away from fast-switching digital nets, provide the specified decoupling and power filtering, and route debug and communications interfaces to accessible test points.

This product page combines the STM32L4R5ZGT6 core, memory, package, interface, and lifecycle information with sourcing guidance and engineering-oriented application analysis. It also separates exact catalog facts from replacement decisions, helping teams determine whether a proposed substitution truly preserves the 144-pin footprint, firmware environment, peripheral mapping, and electrical requirements.

חלופות תחליף ישיר עבור STM32L4R5ZGT6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם STM32L4R5ZGT6 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Pin Count.

STMicroelectronics
Package: 144-LQFP (20 x 20 mm)
Pin Count: 144
השווה עם STM32L4R5ZGT6 →

אין חלופות תואמות Drop-in עבור מוצר זה.

בקשת חלופות

STM32L4R5ZGT6 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4
תדר שעון מקסימלי 120 MHz
Architecture 32-bit ARM RISC
Flash Memory 1 MB (1M × 8)
SRAM 640 KB
מארז 144-LQFP (20 mm × 20 mm)
מספר פינים 144 pins
Operating Voltage Range 1.8 V to 3.3 V
Lowest Operating Voltage 1.2 V
USB Support USB OTG
Storage Interface DFSD
Product Series STM32L4+ Series
סוג הרכבה Surface mount
סטטוס מחזור חיים Active

מדריך תצורת פינים של STM32L4R5ZGT6 144-lqfp (20 mm × 20 mm)

תצורת פינים עבור STM32L4R5ZGT6 (מארזת 144-lqfp (20 mm × 20 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 144-lqfp (20 mm × 20 mm) עבור STM32L4R5ZGT6

אין נתוני פריסת פינים מפורטים עבור STM32L4R5ZGT6.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

STM32L4R5ZGT6 מתאים עבור 6 יישוםs: Industrial Monitoring and Control, USB-Connected Data Logger, Medical Sensor Hub, Smart Energy Meter, Battery-Powered Sensor Node, Human-Machine Interface Controller.

🏭

Industrial Monitoring and Control

The STM32L4R5ZGT6 fits industrial monitoring equipment that combines acquisition, local control, communications, and data logging in one 20 mm × 20 mm microcontroller package. Its 120 MHz Arm Cortex-M4 core provides capacity for filtering and control routines, while 1 MB of flash supports application firmware, configuration data, and update logic. The 144-pin LQFP exposes a broad set of I/O for sensors, digital inputs, communications, status indicators, and local storage. Low-power operating modes can reduce consumption during unattended intervals, although actual duty-cycle savings depend on clocking, peripherals, and wake-up frequency. Confirm analog accuracy, industrial temperature requirements, isolation, and EMC constraints in the final design.

🖥️

USB-Connected Data Logger

The STM32L4R5ZGT6 is suitable for a USB-connected logger that records sensor readings, runs local filtering, and presents data to a host computer. USB OTG support enables USB connectivity, while the 120 MHz Cortex-M4 core can service protocol handling and data preparation. Its 1 MB flash provides room for firmware and local buffering, and 640 KB of SRAM supports working buffers without requiring a large external RAM package. A practical design should include protected USB routing, solid grounding, input filtering, and storage endurance management. The exact USB speed, transceiver arrangement, and descriptor implementation must follow the device datasheet and STMicroelectronics hardware guidance rather than relying on generic USB assumptions.

💊

Medical Sensor Hub

The STM32L4R5ZGT6 can serve as the central controller in a medical sensor hub that acquires measurements, performs local signal conditioning, and communicates results to another system. Its Cortex-M4 core supports efficient fixed-point and floating-point processing, while 1 MB of flash accommodates firmware, calibration data, and protocol components. The large 144-pin package is useful when the design combines sensors, communication peripherals, local controls, and status signaling. Low-power modes can benefit portable instruments, but medical designs must address isolation, leakage current, creepage, electromagnetic compatibility, and applicable product requirements independently. Confirm operating-temperature, qualification, and safety documentation for the intended medical equipment class.

⚡

Smart Energy Meter

The STM32L4R5ZGT6 fits smart energy-meter architectures that measure analog signals, maintain metering state, operate a local display or keypad, and communicate through an external serial or network interface. Its 120 MHz Cortex-M4 core provides margin for calibration and communication tasks, and 640 KB of SRAM reduces pressure on external memory during simultaneous processing. The 144-pin LQFP provides enough connections for measurement front ends, metering interfaces, communications, and user controls. Designers should partition analog and digital circuitry carefully, use suitable protection, and validate metering accuracy across the complete input range. Low-power modes are valuable only when the meter can wake reliably and maintain timekeeping and measurement integrity.

🧩

Battery-Powered Sensor Node

The STM32L4R5ZGT6 is appropriate for a battery-powered sensor node that periodically samples inputs, evaluates thresholds, and transmits results through a low-power radio. Its ultra-low-power STM32L4+ positioning supports the broader STM32L4 family objective of reducing energy use, and its 640 KB SRAM allows meaningful local buffering between wake events. The 120 MHz core can execute protocol and filtering work without changing the architecture to a more complex MCU family. Battery life depends on sensor standby current, radio behavior, supply conversion efficiency, and the interval between wake-ups. Select capacitors and regulators for stable rail startup, and verify whether peripheral state, SRAM retention, and sensor recovery satisfy each sleep cycle.

📺

Human-Machine Interface Controller

The STM32L4R5ZGT6 can manage a compact human-machine interface built from a display, buttons, encoders, indicators, and communications ports. Its 120 MHz Cortex-M4 core provides enough throughput for responsive input handling and graphical-command processing, while 1 MB of flash simplifies storage of firmware, fonts, and configuration data. The 144-pin LQFP is advantageous when a design needs numerous I/O functions rather than the smallest possible footprint. Engineers should budget GPIO ports carefully, apply series damping where appropriate, and separate display and switching noise from sensitive analog channels. If the interface also performs real-time acquisition, validate the combined interrupt, display-refresh, and communication schedule under worst-case bus load.

What are the key specifications of STM32L4R5ZGT6 that engineers should know?
The STM32L4R5ZGT6 combines a 120 MHz Arm Cortex-M4 core, 1 MB of flash, 640 KB of SRAM, and a 144-pin LQFP package in an ultra-low-power MCU. According to the STMicroelectronics product page, it is part of the STM32L4+ family, whose STM32L4R5xx devices target energy-efficient embedded applications. The large 144-pin package provides extensive external I/O, while USB OTG and DFSD support broaden its connectivity and storage options.
What is the operating voltage of STM32L4R5ZGT6?
The STM32L4R5ZGT6 supports a 1.8 V to 3.3 V operating range in the catalog information for this exact device. A related listing also identifies a 1.2 V minimum operating point for the STM32L4R5 family. Confirm the complete voltage, timing, and peripheral constraints against the manufacturer datasheet for the specific power configuration, especially when designing mixed 1.8 V and 3.3 V external interfaces.
Where can I download the STM32L4R5ZGT6 datasheet PDF?
The STM32L4R5ZGT6 datasheet and product documentation are available through the official STMicroelectronics STM32L4R5ZG product page and the device ordering page. Start with the manufacturer product page for the family overview and ordering information, then use the linked technical documentation for the exact package, pin assignments, electrical limits, and peripheral descriptions. The product page is the appropriate source for revisions because a complete pin-level PDF was not reproduced on this page.
Where can I find the STM32L4R5ZGT6 pinout?
The STM32L4R5ZGT6 pinout is defined in the pin-description table and package drawing in the manufacturer datasheet. The device uses a 144-pin LQFP package measuring 20 mm × 20 mm, so the complete assignment includes power, ground, analog, debug, communication, and general-purpose I/O functions. Use the package drawing when assigning PCB tracks because exposed functions and alternate-pin details must be checked against the exact device revision.
Is STM32L4R5ZGT6 suitable for low-power IoT devices?
Yes, the STM32L4R5ZGT6 is designed for ultra-low-power embedded applications and includes the processing and memory resources needed for local sensor management, communications, and control. Its 120 MHz Cortex-M4 core and 1 MB flash support more capable edge functions than a basic low-end MCU, while the STM32L4+ low-power architecture helps preserve battery life during inactive periods. Actual battery life depends on the selected mode, clock tree, peripherals, and wake-up strategy.
How much flash and SRAM does STM32L4R5ZGT6 have?
The STM32L4R5ZGT6 provides 1 MB of flash configured as 1M × 8 and 640 KB of SRAM. According to the STMicroelectronics family description, these resources support the STM32L4+ low-power architecture. The flash can accommodate application firmware, boot logic, parameter storage, and update code, while the SRAM provides working memory for control algorithms, communications buffers, graphics acceleration, and peripheral data handling.
What is the STM32L4R5ZGT6 processor core and maximum clock speed?
The STM32L4R5ZGT6 uses a 32-bit Arm Cortex-M4 RISC core and operates at up to 120 MHz. The Cortex-M4 architecture adds single-precision floating-point capability to the baseline Cortex-M instruction set, making it useful for sensor filtering, motor-control mathematics, signal analysis, and other DSP-assisted routines. Exact timing, bus behavior, and clock-tree configuration should be checked in the manufacturer datasheet and reference manual.
Where can I buy STM32L4R5ZGT6 online?
Use the Request a Quote form on this page to request STM32L4R5ZGT6 availability, current commercial terms, and an order quotation. The exact MPN is also listed by the manufacturer, the ST online store, and authorized distribution channels, but live inventory and order configuration can change quickly. Submit the quantity, target date, packaging preference, and shipment destination with the request for the most useful response.
What is the price of STM32L4R5ZGT6?
The current commercial price for STM32L4R5ZGT6 is returned through the Request a Quote form on this page. The form allows the requested quantity and supply conditions to be considered without embedding a transient price in technical documentation. Buyers should also confirm the exact 144-LQFP ordering suffix, delivery schedule, and whether any company-specific purchasing or logistics terms apply.
What is the lead time and stock status for STM32L4R5ZGT6?
Current stock and lead time for STM32L4R5ZGT6 should be confirmed through the Request a Quote form on this page. The exact part is presented as an active catalog device, but availability at a particular quantity can vary by shipment date, package configuration, and market conditions. Include the required delivery date and annual usage so the supplier can respond with a meaningful allocation and lead-time statement.
Is STM32L4R5ZGT6 in stock?
The STM32L4R5ZGT6 is offered through manufacturer and distribution channels, but live stock for a specific order quantity is confirmed through the Request a Quote form on this page. Because inventory can change rapidly, an inquiry should identify the required quantity, tray or tape-and-reel preference, and shipment destination. This avoids treating a general catalog listing as a guaranteed allocation for a particular production window.
STM32L4R5ZGT6 vs STM32L4R5ZGT6TR - which should I select?
STM32L4R5ZGT6 and STM32L4R5ZGT6TR describe the same 120 MHz Cortex-M4, 1 MB-flash microcontroller in the 144-LQFP package, with the suffix primarily identifying the orderable packaging or shipping form. Select the suffix required by the assembly process and purchasing records rather than treating the tape-and-reel form as a different electrical device. Confirm the exact package suffix in the manufacturer ordering information before releasing the BOM.
When should I choose STM32L4R5ZGT6 instead of another STM32L4 microcontroller?
Choose STM32L4R5ZGT6 when a design needs a 120 MHz Cortex-M4 core, 1 MB flash, 640 KB SRAM, and 144-pin LQFP integration while retaining the STM32L4+ low-power feature set. A smaller-package STM32L4 device may be preferable when fewer I/O pins are required, while another family member may be better when a specific peripheral, memory configuration, or automotive qualification is needed. The final choice should be based on exact peripheral and package requirements.
Is STM32L4R5ZGT6 suitable for USB and external storage designs?
Yes, the catalog description for STM32L4R5ZGT6 identifies USB OTG and DFSD capability. These interfaces can support USB-connected data acquisition, removable storage access, firmware update workflows, or peripheral expansion when the selected board, connector, transceiver, and storage device satisfy the device requirements. USB signal routing requires careful impedance control, while DFSD designs should follow the manufacturer layout recommendations for clocking, grounding, and signal integrity.
What can replace STM32L4R5ZGT6 on an existing PCB?
A valid replacement for STM32L4R5ZGT6 must retain the 144-LQFP pin arrangement and support the same 120 MHz Cortex-M4, 1 MB flash, 640 KB SRAM, power, peripheral, and software requirements. The identified STM32L4R5ZG family and the tape-and-reel ordering variant are related options, but a general STM32 family cross-reference does not prove drop-in compatibility. Validate any proposed substitution against the manufacturer pin table, errata, timing, boot configuration, and firmware before production use.
Is STM32L4R5ZGT6 RoHS compliant and suitable for automotive designs?
The exact RoHS, REACH, AEC-Q100, lead-free, and halogen-free status must be confirmed from the manufacturer product documentation for this ordering code. Its broad industrial, medical, consumer, and IoT capability does not by itself establish automotive qualification. For vehicle applications, request the exact qualification report, temperature grade, traceability information, and AEC-Q100 documentation before using the device in a safety- or automotive-relevant design.

נתוני עזר הנדסיים עבור STM32L4R5ZGT6 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose STM32L4R5ZGT6 when the design requires the combination of a 120 MHz Cortex-M4 core, 1 MB flash, 640 KB SRAM, USB OTG, DFSD, and a 144-pin LQFP footprint. It is particularly attractive for industrial controllers, metering equipment, medical sensor hubs, USB data loggers, and human-machine interfaces that need more I/O and memory than a compact low-end MCU. Select a smaller-package STM32L4 device when PCB area dominates and the required peripheral mix fits. Select a different STM32L4R5 member when memory, temperature grade, oscillator support, or a particular peripheral differs from the target specification. Treat a same-series device as a drop-in alternative only after checking every pin, electrical limit, boot option, peripheral mapping, and package dimension against the manufacturer documentation. The tape-and-reel suffix represents an orderable packaging form rather than a new electrical alternative.

השוואה עם חלופות

פרמטר מוצר זה
Brand STMicroelectronics
Package 144-LQFP (20 mm × 20 mm)
Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4
Maximum Clock Frequency 120 MHz
Flash Memory 1 MB (1M × 8)
SRAM 640 KB
Operating Voltage Range 1.8 V to 3.3 V
Connectivity USB OTG and DFSD
Lifecycle Status Active

מבדילים עיקריים

  • Combines a 120 MHz Cortex-M4 core with 1 MB flash and 640 KB SRAM (לעומתLower-memory STM32L4 variants)
  • Provides 144 external pins for mixed embedded control systems (לעומתSmall-package STM32L4 microcontrollers)
  • Integrates USB OTG and DFSD capabilities (לעומתSTM32L4 devices without the same peripheral set)
  • Targets the STM32L4+ ultra-low-power architecture (לעומתGeneral-purpose Cortex-M microcontrollers)

הערות תכנון

Use the manufacturer package drawing and pin-description table as the authority for all 144 LQFP connections. Place the MCU close to the lowest-frequency decoupling point, route each supply through the recommended network, and keep analog inputs away from display, USB, and switching outputs. The 20 mm × 20 mm package provides ample breakout space, but the final land pattern, paste mask, and assembly tolerances must still follow the official package drawing.

The STM32L4R5ZGT6 supports operation across a low-voltage range that includes 1.8 V to 3.3 V applications. Select the regulator, bypass capacitors, and I/O levels for the exact rail configuration rather than assuming every peripheral can operate at the lowest family voltage. Verify brownout behavior, startup sequencing, sleep-mode rail retention, and external-interface signal levels before enabling low-power modes in the production design.

Treat USB, DFSD, high-speed clock, and communication routes as controlled-impedance interfaces when required by their specifications. Provide short return paths, maintain continuous reference planes, avoid routing sensitive nets beneath switching nodes, and follow the manufacturer layout guidance for associated clocks and data lines. USB impedance, ESD protection, connector routing, and supply return current must be reviewed together to prevent marginal signal integrity.

Do not substitute the 144-LQFP device with a related STM32L4R5 member merely because it uses the same Cortex-M4 family. Exact flash size, SRAM, peripheral mix, pin multiplexing, oscillator support, boot behavior, temperature grade, and package dimensions must match the PCB and firmware assumptions. After substitution, rebuild the project with the selected device definition and rerun startup, clock, USB, DFSD, and low-power tests.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance was not explicitly stated for the exact MPN. Automotive qualification should be determined from the exact ordering code and its manufacturer documentation rather than inferred from the STM32L4+ family description.

חיפושים קשורים

STM32L4R5ZGT6 datasheet STM32L4R5ZGT6 pinout STM32L4R5ZGT6 datasheet pdf STM32L4R5ZGT6 equivalent STM32L4R5ZGT6 replacement STM32L4R5ZGT6 price STM32L4R5ZGT6 stock STMicroelectronics STM32L4R5ZGT6 STM32L4R5ZG LQFP-144 microcontroller STM32L4R5ZGT6 USB OTG application STM32L4R5ZGT6 vs STM32L4R5ZGT6TR STM32L4R5ZG footprint

רכיבים ומונחים קשורים

STMicroelectronics STM32L4R5ZGT6 STM32L4R5ZG STM32L4+ Series Arm Cortex-M4 32-bit RISC core ultra-low-power microcontroller embedded microcontroller microcontroller semiconductor 1 MB flash memory 640 KB SRAM 120 MHz clock 144-LQFP LQFP package family surface-mount package USB OTG DFSD industrial control medical sensor hub smart energy meter USB data logger battery-powered sensor node human-machine interface low-power mode
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר