STM32L4R5ZGT6 - 120MHz Cortex-M4 1MB Flash MCU | ST
Référence : STM32L4R5ZGT6 ✓ ActifSTM32L4R5ZGT6 Présentation
An ultra-low-power microcontroller is an embedded processing device optimized to balance compute performance with standby, stop, and low-power-run efficiency. The STM32L4R5ZGT6 belongs to the STM32L4+ Series, combining a high-performance Arm Cortex-M4 RISC core with energy-conscious peripherals. This hierarchy places it above general-purpose Cortex-M microcontrollers in applications that require both real-time processing and constrained power budgets.
Principal features include a 32-bit Arm Cortex-M4 core with floating-point capability, operation up to 120 MHz, 1 MB of flash, 640 KB of SRAM, and a 144-LQFP package. The STM32L4+ family also supports advanced connectivity and security-oriented use cases, including USB OTG, DFSD capability, and efficient management of sensor, display, storage, and communications peripherals. Its large pin count provides broad external I/O access for mixed-signal embedded platforms.
The STM32L4R5 architecture is suited to control loops that must execute predictably while retaining multiple low-power operating modes. Its Cortex-M4 instruction set supports digital signal processing and control-oriented routines, while the integrated memory reduces external bus pressure for common workloads. The 1 MB flash capacity also allows substantial firmware, boot code, configuration data, and application logic to reside on-chip, supporting standalone designs with limited external storage requirements.
Typical applications include industrial monitoring and control equipment, connected energy meters, medical instrumentation, USB-connected data loggers, low-power sensor hubs, and compact human-interface systems. In an energy meter, the device can combine measurement, calendar, communications, and local display-control tasks while using low-power modes between update intervals. In medical equipment, deterministic processing and a broad peripheral complement help consolidate functions while reducing board area.
PCB design should begin with the complete manufacturer pin description and package drawing because the 144-pin LQFP footprint provides many power, ground, analog, debug, communication, and general-purpose I/O assignments. Keep sensitive analog inputs away from fast-switching digital nets, provide the specified decoupling and power filtering, and route debug and communications interfaces to accessible test points.
This product page combines the STM32L4R5ZGT6 core, memory, package, interface, and lifecycle information with sourcing guidance and engineering-oriented application analysis. It also separates exact catalog facts from replacement decisions, helping teams determine whether a proposed substitution truly preserves the 144-pin footprint, firmware environment, peripheral mapping, and electrical requirements.
Alternatives de remplacement direct pour STM32L4R5ZGT6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32L4R5ZGT6 (même facteur de forme et même empreinte) — différant par Package, Pin Count.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesSTM32L4R5ZGT6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 |
| Fréquence d'horloge maximale | 120 MHz |
| Architecture | 32-bit ARM RISC |
| Flash Memory | 1 MB (1M × 8) |
| SRAM | 640 KB |
| Boîtier | 144-LQFP (20 mm × 20 mm) |
| Nombre de broches | 144 pins |
| Operating Voltage Range | 1.8 V to 3.3 V |
| Lowest Operating Voltage | 1.2 V |
| USB Support | USB OTG |
| Storage Interface | DFSD |
| Product Series | STM32L4+ Series |
| Type de montage | Surface mount |
| Statut du cycle de vie | Active |
Guide de configuration des broches du STM32L4R5ZGT6 144-lqfp (20 mm × 20 mm)
Configuration des broches du STM32L4R5ZGT6 (boîtier 144-lqfp (20 mm × 20 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32L4R5ZGT6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32L4R5ZGT6 convient pour 6 applications: Industrial Monitoring and Control, USB-Connected Data Logger, Medical Sensor Hub, Smart Energy Meter, Battery-Powered Sensor Node, Human-Machine Interface Controller.
Industrial Monitoring and Control
The STM32L4R5ZGT6 fits industrial monitoring equipment that combines acquisition, local control, communications, and data logging in one 20 mm × 20 mm microcontroller package. Its 120 MHz Arm Cortex-M4 core provides capacity for filtering and control routines, while 1 MB of flash supports application firmware, configuration data, and update logic. The 144-pin LQFP exposes a broad set of I/O for sensors, digital inputs, communications, status indicators, and local storage. Low-power operating modes can reduce consumption during unattended intervals, although actual duty-cycle savings depend on clocking, peripherals, and wake-up frequency. Confirm analog accuracy, industrial temperature requirements, isolation, and EMC constraints in the final design.
Recommandé
USB-Connected Data Logger
The STM32L4R5ZGT6 is suitable for a USB-connected logger that records sensor readings, runs local filtering, and presents data to a host computer. USB OTG support enables USB connectivity, while the 120 MHz Cortex-M4 core can service protocol handling and data preparation. Its 1 MB flash provides room for firmware and local buffering, and 640 KB of SRAM supports working buffers without requiring a large external RAM package. A practical design should include protected USB routing, solid grounding, input filtering, and storage endurance management. The exact USB speed, transceiver arrangement, and descriptor implementation must follow the device datasheet and STMicroelectronics hardware guidance rather than relying on generic USB assumptions.
Recommandé
Medical Sensor Hub
The STM32L4R5ZGT6 can serve as the central controller in a medical sensor hub that acquires measurements, performs local signal conditioning, and communicates results to another system. Its Cortex-M4 core supports efficient fixed-point and floating-point processing, while 1 MB of flash accommodates firmware, calibration data, and protocol components. The large 144-pin package is useful when the design combines sensors, communication peripherals, local controls, and status signaling. Low-power modes can benefit portable instruments, but medical designs must address isolation, leakage current, creepage, electromagnetic compatibility, and applicable product requirements independently. Confirm operating-temperature, qualification, and safety documentation for the intended medical equipment class.
Recommandé
Smart Energy Meter
The STM32L4R5ZGT6 fits smart energy-meter architectures that measure analog signals, maintain metering state, operate a local display or keypad, and communicate through an external serial or network interface. Its 120 MHz Cortex-M4 core provides margin for calibration and communication tasks, and 640 KB of SRAM reduces pressure on external memory during simultaneous processing. The 144-pin LQFP provides enough connections for measurement front ends, metering interfaces, communications, and user controls. Designers should partition analog and digital circuitry carefully, use suitable protection, and validate metering accuracy across the complete input range. Low-power modes are valuable only when the meter can wake reliably and maintain timekeeping and measurement integrity.
Recommandé
Battery-Powered Sensor Node
The STM32L4R5ZGT6 is appropriate for a battery-powered sensor node that periodically samples inputs, evaluates thresholds, and transmits results through a low-power radio. Its ultra-low-power STM32L4+ positioning supports the broader STM32L4 family objective of reducing energy use, and its 640 KB SRAM allows meaningful local buffering between wake events. The 120 MHz core can execute protocol and filtering work without changing the architecture to a more complex MCU family. Battery life depends on sensor standby current, radio behavior, supply conversion efficiency, and the interval between wake-ups. Select capacitors and regulators for stable rail startup, and verify whether peripheral state, SRAM retention, and sensor recovery satisfy each sleep cycle.
Recommandé
Human-Machine Interface Controller
The STM32L4R5ZGT6 can manage a compact human-machine interface built from a display, buttons, encoders, indicators, and communications ports. Its 120 MHz Cortex-M4 core provides enough throughput for responsive input handling and graphical-command processing, while 1 MB of flash simplifies storage of firmware, fonts, and configuration data. The 144-pin LQFP is advantageous when a design needs numerous I/O functions rather than the smallest possible footprint. Engineers should budget GPIO ports carefully, apply series damping where appropriate, and separate display and switching noise from sensitive analog channels. If the interface also performs real-time acquisition, validate the combined interrupt, display-refresh, and communication schedule under worst-case bus load.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32L4R5ZGT6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | STMicroelectronics |
| Package | 144-LQFP (20 mm × 20 mm) |
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum Clock Frequency | 120 MHz |
| Flash Memory | 1 MB (1M × 8) |
| SRAM | 640 KB |
| Operating Voltage Range | 1.8 V to 3.3 V |
| Connectivity | USB OTG and DFSD |
| Lifecycle Status | Active |
Principaux différenciateurs
- Combines a 120 MHz Cortex-M4 core with 1 MB flash and 640 KB SRAM (vs Lower-memory STM32L4 variants)
- Provides 144 external pins for mixed embedded control systems (vs Small-package STM32L4 microcontrollers)
- Integrates USB OTG and DFSD capabilities (vs STM32L4 devices without the same peripheral set)
- Targets the STM32L4+ ultra-low-power architecture (vs General-purpose Cortex-M microcontrollers)
Notes de conception
Use the manufacturer package drawing and pin-description table as the authority for all 144 LQFP connections. Place the MCU close to the lowest-frequency decoupling point, route each supply through the recommended network, and keep analog inputs away from display, USB, and switching outputs. The 20 mm × 20 mm package provides ample breakout space, but the final land pattern, paste mask, and assembly tolerances must still follow the official package drawing.
The STM32L4R5ZGT6 supports operation across a low-voltage range that includes 1.8 V to 3.3 V applications. Select the regulator, bypass capacitors, and I/O levels for the exact rail configuration rather than assuming every peripheral can operate at the lowest family voltage. Verify brownout behavior, startup sequencing, sleep-mode rail retention, and external-interface signal levels before enabling low-power modes in the production design.
Treat USB, DFSD, high-speed clock, and communication routes as controlled-impedance interfaces when required by their specifications. Provide short return paths, maintain continuous reference planes, avoid routing sensitive nets beneath switching nodes, and follow the manufacturer layout guidance for associated clocks and data lines. USB impedance, ESD protection, connector routing, and supply return current must be reviewed together to prevent marginal signal integrity.
Do not substitute the 144-LQFP device with a related STM32L4R5 member merely because it uses the same Cortex-M4 family. Exact flash size, SRAM, peripheral mix, pin multiplexing, oscillator support, boot behavior, temperature grade, and package dimensions must match the PCB and firmware assumptions. After substitution, rebuild the project with the selected device definition and rerun startup, clock, USB, DFSD, and low-power tests.
Informations de conformité
Compliance was not explicitly stated for the exact MPN. Automotive qualification should be determined from the exact ordering code and its manufacturer documentation rather than inferred from the STM32L4+ family description.