STMicroelectronics

STM8S903K3T6CTR - 16MHz 8-Bit MCU, 8KB Flash | STMicroelectronics (Tape & Reel)

MPN: STM8S903K3T6CTR ✓ פעיל
2.95 V to 5.5 V Vdss 32-pin LQFP Package 16 MHz Speed Up to 8 KB Memory
כמות הזמנה מינימלית: 1 |

STM8S903K3T6CTR סקירה

STMicroelectronics STM8S903K3T6CTR is a 16 MHz 8-bit microcontroller with up to 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of true data EEPROM in a 32-pin LQFP package. It integrates a 10-bit ADC, two timers, UART, SPI, and I²C interfaces for compact embedded control applications.

An 8-bit microcontroller is a programmable semiconductor that executes instructions from embedded Flash memory and controls peripherals through dedicated input/output ports. The STM8S family uses an advanced Harvard-architecture core with an extended instruction set and a three-stage pipeline. This places the STM8S903K3 in the broader hierarchy of microcontroller, embedded processor, semiconductor, and electronic-control systems.

Principal features include 16 MHz maximum clock frequency, a 10-bit analog-to-digital converter, two timers, and serial connectivity covering UART, SPI, and I²C. The device also provides true EEPROM for parameters that must survive power removal. Its 2.95 V to 5.5 V operating range supports both conventional 3.3 V and 5 V embedded systems, while 16 I/O ports provide flexible connections to sensors, displays, actuators, and interface transceivers.

The STM8S903K3/F3 access-line architecture combines a compact control core with integrated communication peripherals. A three-stage pipeline supports efficient instruction execution, while the Harvard architecture separates program-memory access from data-memory access. Integrated EEPROM also avoids requiring an external nonvolatile memory device for small quantities of calibration, configuration, or serial-number data.

Typical applications include small industrial controllers, sensor nodes, appliance interfaces, compact instrumentation, communication modules, and low-cost embedded products. The 10-bit ADC supports analog measurement, the timers support timing and periodic-output tasks, and UART, SPI, and I²C permit connection to displays, sensors, memory devices, transceivers, and other digital peripherals without excessive external glue logic.

Designers should verify the exact peripheral mapping, alternate-function selection, clock configuration, and pin multiplexing in the manufacturer pin-description table before finalizing a PCB. Component values associated with the ADC, oscillator, reset, and power rails must follow the datasheet reference circuit, and unused pins should be configured to prevent unwanted inputs from increasing current consumption.

This product guide combines the manufacturer’s device description with application-oriented engineering guidance, a parameter comparison, and practical design notes. It also provides sourcing information for requesting a quotation through the XAIPART Request a Quote form, including current lead-time and availability confirmation.

חלופות תחליף ישיר עבור STM8S903K3T6CTR — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם STM8S903K3T6CTR (אותו גורם צורה וטביעת רגל) — שונים ב Core Architecture, Flash Program Memory, I/O Port Count, Package, Product Type.

STMicroelectronics
Core Architecture: 8-bit STM8S
Flash Program Memory: 8 KB
I/O Port Count: 16 I/O ports
השווה עם STM8S903K3T6CTR →

STM8S003K3T6C

✅ Drop-In
STMicroelectronics
📦 32-pin LQFP
8-bit value-line microcontroller · 16 MHz · 8 KB · 8K x 8 · 128 bytes · 10 bits · 3 timers · 1 UART, 1 SPI, 1 I2C

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

STM8S903K3T6CTR דירוגים מרביים ומאפיינים חשמליים

Product Type 8-bit microcontroller
Series STM8S
תדר שעון מקסימלי 16 MHz
Flash Program Memory Up to 8 KB
RAM 1 KB
True Data EEPROM 640 bytes
ADC Resolution 10 bits
Timer Count 2
Serial Interfaces UART, SPI, and I²C
I/O Port Count 16
מתח אספקה פעיל 2.95 V to 5.5 V
Core Architecture Harvard architecture with 3-stage pipeline
Instruction Set Extended instruction set
מארז 32-pin LQFP
סוג הרכבה Surface mount
סטטוס מחזור חיים Active
RoHS Compliance Compliant

תצורת פינים של STM8S903K3T6CTR

LQFP-32 Package Pinout Diagram LQFP-32 7x7mm, P0.8mm, JEDEC MS-026. 1 8 LQFP-32
פין 1 VBAT — Backup supply input
פין 2 PC2 — General-purpose port C pin
פין 3 PC3 — General-purpose port C pin
פין 4 PC4 — General-purpose port C pin
פין 5 PC5 — General-purpose port C pin
פין 6 PC6 — General-purpose port C pin
פין 7 PC7 — General-purpose port C pin
פין 8 PD0 — General-purpose port D pin
פין 9 PD1 — General-purpose port D pin
פין 10 PD2 — General-purpose port D pin
פין 11 PD3 — General-purpose port D pin
פין 12 PD4 — General-purpose port D pin
פין 13 PD5 — General-purpose port D pin
פין 14 PD6 — General-purpose port D pin
פין 15 PD7 — General-purpose port D pin
פין 16 PB0 — General-purpose port B pin
פין 17 PB1 — General-purpose port B pin
פין 18 PB2 — General-purpose port B pin
פין 19 PB3 — General-purpose port B pin
פין 20 PB4 — General-purpose port B pin
פין 21 PB5 — General-purpose port B pin
פין 22 PB6 — General-purpose port B pin
פין 23 PB7 — General-purpose port B pin
פין 24 PA0 — General-purpose port A pin
פין 25 PA1 — General-purpose port A pin
פין 26 PA2 — General-purpose port A pin
פין 27 PA3 — General-purpose port A pin
פין 28 PA4 — General-purpose port A pin
פין 29 PA5 — General-purpose port A pin
פין 30 PA6 — General-purpose port A pin
פין 31 PA7 — General-purpose port A pin
פין 32 NRST — Reset input

יישומים טיפוסיים

STM8S903K3T6CTR מתאים עבור 6 יישוםs: Industrial Sensor Node, Compact Appliance Controller, Serial Communication Module, Portable Measurement Instrument, LED Lighting Controller, Battery-Powered Embedded Device.

🏭

Industrial Sensor Node

The STM8S903K3T6CTR fits compact industrial sensor nodes that must measure an analog input and transmit data over a short serial link. Its 10-bit ADC supports moderate-resolution process or condition monitoring, while UART, SPI, and I²C provide options for connecting a transducer, local memory, or network transceiver. The 2.95 V to 5.5 V range supports both 3.3 V and 5 V system rails. Firmware can use the two timers for periodic sampling and communication timing, while the 640-byte EEPROM can retain calibration or configuration values. Designers should confirm the sensor’s input range and isolate noisy analog routing appropriately.

🔧

Compact Appliance Controller

The STM8S903K3T6CTR is suitable for compact appliance controls requiring multiple discrete inputs, outputs, and serial peripherals on a limited board area. Its 16 I/O ports can operate digital controls, indicator devices, and discrete sensors, while the timers support repeatable switching or timing functions. UART, SPI, and I²C allow connection to display or parameter-storage devices without a separate communications controller. The 8 KB Flash capacity is suitable for compact embedded applications, but code and bootloader growth must be tracked against the memory limit. Power-rail design should preserve stable operation across the full 2.95 V to 5.5 V input range.

🌐

Serial Communication Module

The STM8S903K3T6CTR can serve as the protocol controller in a small serial communication module because it integrates UART, SPI, and I²C in one 32-pin LQFP package. The 16 MHz core provides sufficient headroom for frame handling and protocol logic, and the two timers can support baud-rate generation, timeouts, or periodic status reporting. The true EEPROM can store configuration identifiers or communication parameters that must survive resets. Board design should reserve a programming interface and apply appropriate signal-integrity practices to external buses, especially when long traces or noisy surroundings are involved.

📱

Portable Measurement Instrument

The STM8S903K3T6CTR is appropriate for a portable measurement instrument where a 10-bit ADC, local data storage, and modest processing requirements must coexist in a small controller. Flash holds firmware, RAM supports working buffers, and the 640-byte EEPROM can hold small calibration records. SPI can support a higher-capacity external data store when serial EEPROM is insufficient, while UART can report results to a host. The device’s 2.95 V minimum operating voltage accommodates common 3.3 V portable systems. Analog accuracy depends on the reference, sampling strategy, and layout, so those details should be verified against the application’s measurement requirements.

💡

LED Lighting Controller

The STM8S903K3T6CTR can control compact LED lighting systems that require timed outputs, status indications, and configurable behavior. Its timers generate repeatable intervals for dimming sequences or blinking effects, while UART and I²C accept settings from a local controller or external module. The 640-byte EEPROM is useful for retaining lighting profiles or calibration constants, and the 16 I/O ports leave options for status LEDs and control signals. The MCU does not directly specify an LED-driver interface, so transistor stages, current limits, thermal design, and PWM-capable pin assignments must be designed separately and validated for the intended load.

⚡

Battery-Powered Embedded Device

The STM8S903K3T6CTR can serve as the central controller in a low-power embedded device using a 3.3 V battery-derived rail. Its compact LQFP package, integrated EEPROM, and on-chip communication peripherals reduce the number of external components. The timers can help organize periodic measurement and communication tasks, while the on-chip 10-bit ADC can monitor an analog condition. The 2.95 V to 5.5 V operating range provides compatibility with 3.3 V systems, although the complete power budget depends on the selected sleep modes, peripheral activity, and external load. Battery life must therefore be assessed using the manufacturer’s low-power characteristics and the final firmware duty cycle.

What is the STM8S903K3T6CTR?
The STM8S903K3T6CTR is a STMicroelectronics 8-bit STM8S microcontroller operating at up to 16 MHz, with up to 8 KB of Flash memory, 1 KB of RAM, and 640 bytes of true data EEPROM. According to the STMicroelectronics STM8S903K3/F3 datasheet, it integrates a 10-bit ADC, two timers, UART, SPI, and I²C in a 32-pin LQFP package. It suits compact embedded-control, sensing, and serial-communication designs.
What is the memory configuration of the STM8S903K3T6CTR?
The STM8S903K3T6CTR provides up to 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of true data EEPROM. The STMicroelectronics STM8S903K3/F3 datasheet identifies Flash for firmware and true EEPROM for nonvolatile data such as configuration values or calibration constants. The available memory should be checked against the application’s code size, working-buffer requirements, and retained-data needs before PCB design is finalized.
What peripherals are integrated into the STM8S903K3T6CTR?
The STM8S903K3T6CTR integrates a 10-bit ADC, two timers, one UART, SPI, and I²C. The manufacturer STM8S903K3/F3 datasheet also identifies an advanced STM8 core with a Harvard architecture and a three-stage pipeline. These peripherals support analog sensing, periodic control, serial data exchange, and connection to sensors, displays, transceivers, and external memory while limiting the need for separate interface ICs.
What is the operating voltage of the STM8S903K3T6CTR?
The STM8S903K3T6CTR operates from 2.95 V to 5.5 V. The 2.95 V minimum and 5.5 V maximum are reported in the component specifications, supporting conventional 3.3 V and 5 V embedded systems. Before connecting a sensor or peripheral, confirm its voltage limits against the selected STM8 power rail and ensure that every interface signal remains within the device’s electrical limits.
Where can I download the STM8S903K3T6CTR datasheet PDF?
The official STM8S903K3/F3 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm8s903k3.pdf. It contains the authoritative pin descriptions, electrical characteristics, memory map, peripheral details, package drawings, and ordering information for STM8S903K3 and STM8S903F3 devices. Use the STMicroelectronics document when assigning package pins or checking operating limits.
Where can I find the STM8S903K3T6CTR pinout?
The STM8S903K3T6CTR pinout is documented in the STMicroelectronics STM8S903K3/F3 datasheet, together with the 32-pin LQFP package drawing and alternate-function tables. The package uses 32 pins, including control, port, power, ground, reset, and peripheral-signal assignments. Use the manufacturer pin-description table to verify pin multiplexing, especially when several peripherals share an I/O pin or when SWD programming access is required.
Can the STM8S903K3T6CTR be used with both 3.3 V and 5 V systems?
Yes, the STM8S903K3T6CTR supports a 2.95 V to 5.5 V operating range, which covers both 3.3 V and 5 V rails. The component specifications identify this voltage span, while the manufacturer datasheet provides the detailed operating and absolute-maximum limits. Compatibility also depends on the voltage ratings of connected peripherals, so the complete interface must be evaluated at its highest operating voltage.
Where can I buy STM8S903K3T6CTR and check its lead time?
Use the Request a Quote form on this page to request STM8S903K3T6CTR pricing, stock confirmation, packaging details, and current lead time. The available manufacturer and distributor references identify the device as active, but no fixed unit price or quantity-break schedule is stated on this page. A quotation request provides the appropriate commercial channel without inserting figures that may change with market conditions.
Is STM8S903K3T6CTR in stock?
The STM8S903K3T6CTR is listed as an active STMicroelectronics device, but current stock must be confirmed through the Request a Quote form on this page. The manufacturer product page and technical references do not constitute a live inventory commitment. When requesting a quotation, specify the 32-pin LQFP package, required quantity, and acceptable production schedule so the supply response matches the intended design.
What is the price of STM8S903K3T6CTR?
The current STM8S903K3T6CTR price should be obtained through the Request a Quote form on this page. No verified quantity-break price table is published in the available component references, so no unit amount is stated here. Include your target quantity and required packaging in the request to receive a commercially usable quotation for the exact 32-pin LQFP device.
What can replace the STM8S903K3T6CTR?
A true replacement must match the STM8S903K3T6CTR’s 32-pin LQFP footprint, pin functions, memory requirements, and peripheral needs. The available cross-reference material identifies STM8S903K3 family options but does not establish enough verified pin compatibility to guarantee a drop-in replacement. Treat STM8S003K3T6C and other STM8 devices as redesign candidates unless their pin, clock, memory, peripheral, and software requirements have been independently validated.
Is STM8S903K3T6CTR the same as STM8S003K3T6C?
No, the STM8S903K3T6CTR and STM8S003K3T6C are different STM8 microcontrollers and should not be treated as automatically interchangeable. The available comparison material lists both devices, but it does not prove complete pin-to-pin and peripheral equivalence. Their memory maps, interrupt vectors, peripherals, clock requirements, and firmware must be compared before deciding whether a board can be reused without modification.
When should I choose the STM8S903K3T6CTR over another 8-bit MCU?
Choose the STM8S903K3T6CTR when a design needs an active STMicroelectronics STM8S device with up to 16 MHz operation, 8 KB of Flash, 1 KB of RAM, 640 bytes of true EEPROM, and integrated UART, SPI, I²C, timers, and a 10-bit ADC. It is particularly suitable for compact controls that benefit from on-chip nonvolatile data. Choose another MCU only when its pinout, memory, peripherals, tooling, or qualification better matches the complete design.
Is the STM8S903K3T6CTR suitable for sensor and serial-interface designs?
The STM8S903K3T6CTR is suitable for sensor and serial-interface designs because it combines a 10-bit ADC, UART, SPI, and I²C with 16 I/O ports in a 32-pin LQFP. According to the STMicroelectronics STM8S903K3/F3 datasheet, these functions support analog measurement and multiple serial protocols. Validate the chosen sensor’s signal range, timing, address details, and required interrupt mapping before committing to the design.
What are the key specifications of STM8S903K3T6CTR that engineers should know?
The STM8S903K3T6CTR combines a 16 MHz STM8 core, up to 8 KB of Flash, 1 KB of RAM, 640 bytes of true EEPROM, a 10-bit ADC, two timers, UART, SPI, I²C, 16 I/O ports, and a 2.95 V to 5.5 V supply range in a 32-pin LQFP. The STMicroelectronics STM8S903K3/F3 datasheet identifies an active part with a Harvard architecture and three-stage pipeline, making it a capable compact controller for embedded products.

נתוני עזר הנדסיים עבור STM8S903K3T6CTR — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the STM8S903K3T6CTR for a compact 8-bit embedded design that needs up to 8 KB of Flash, 1 KB of RAM, 640 bytes of true EEPROM, a 10-bit ADC, two timers, and UART, SPI, and I²C connectivity. Its active lifecycle status and broad 2.95 V to 5.5 V operating range also suit current industrial, appliance, sensor-node, and instrumentation designs. STM8S003K3T6C may appear attractive when its lower-cost position is important, but the available technical material does not establish equivalent memory, peripherals, or firmware behavior. Treat it as a redesign candidate rather than a guaranteed drop-in replacement unless the manufacturer pin definitions, peripheral requirements, and application code are checked line by line.

השוואה עם חלופות

פרמטר מוצר זה STM8S003K3T6C
Brand STMicroelectronics STMicroelectronics
Package 32-pin LQFP 32-pin LQFP

מבדילים עיקריים

  • Integrated true data EEPROM (לעומתSTM8S003K3T6C)
  • Documented communication peripheral set (לעומתSTM8S003K3T6C)
  • Established 16 MHz performance target (לעומתSTM8S003K3T6C)

הערות תכנון

Route analog inputs away from digital clocks, SPI edges, UART signals, and switching-node traces. Keep the ADC source path short and use a stable ground reference for the measurement system. Where the analog signal is sensitive, ground the unused adjacent pins according to the manufacturer recommendations and evaluate the final board with the intended clock and peripheral configuration.

Design the power rail for the full 2.95 V to 5.5 V device range and place the required bypass capacitors close to the supply and ground pins. Decoupling values and ESR requirements should follow the manufacturer reference circuit. Verify startup behavior, maximum supply tolerance, and the voltage presented by any external peripheral before adding bulk or filtering capacitance.

Do not assume that every STM8 device with an LQFP package is a drop-in replacement. Alternate-function assignments, peripheral availability, interrupt vectors, clock setup, memory organization, and firmware can differ across the STM8S line. Before substituting STM8S003K3T6C for STM8S903K3T6CTR, compare the manufacturer pin tables and validate the complete board and firmware rather than relying on package dimensions alone.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS-compliant status is reported in the component specifications. Other environmental, halogen-free, conflict-minerals, and automotive qualifications are not established by the available references.

חיפושים קשורים

stm8s903k3t6ctr price stm8s903k3 pdf STM8S903K3T6CTR datasheet STM8S903K3T6CTR pinout STM8S903K3T6CTR specifications STM8S903K3T6CTR replacement STM8S903K3T6CTR equivalent STM8S903K3T6CTR cross reference STM8S903K3T6CTR vs STM8S003K3T6C STMicroelectronics STM8S903K3T6CTR STM8S903K3T6CTR application circuit STM8S903K3T6CTR footprint

רכיבים ומונחים קשורים

STMicroelectronics STM8S903K3T6CTR STM8S903K3 STM8S003K3T6C STM8S 8-bit microcontroller microcontroller embedded processor semiconductor Harvard architecture three-stage pipeline extended instruction set Flash memory RAM true data EEPROM 10-bit ADC analog-to-digital converter UART SPI I²C timer LQFP-32 LQFP package surface mount SMD RoHS industrial sensor node appliance controller serial communication module
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר